952 resultados para Advanced Industrial-societies


Relevância:

30.00% 30.00%

Publicador:

Resumo:

Nesta dissertação procuramos abordar alguns aspectos introdutórios ao estudo da Ergonomia, apresentando-a como resultante do conhecimento acumulado, pela humanidade sobre o trabalho e o seu controle. A dissertação inicia-se por um breve histórico das diversas formas de organização da sociedade humana, segundo as relações de trabalho dominantes. Segue-se uma análise mais detalhada da organização do trabalho após o surgimento do capitalismo, enfocando centralmente o taylorismo, o fordismo, o fayolismo e a escola comportamentalista. Após o que há uma análise do papel da Psicologia Aplicada ao Trabalho quanto ao desenvolvimento das teorias da organização do trabalho e do próprio controle sobre o trabalho. Finalmente, procuramos sistematizar alguns dados sobre o surgimento e desenvolvimento da Ergonomia no mundo, seus principais métodos e aplicações, e emitimos algumas opiniões sobre os possíveis caminhos para sua introdução no Brasil.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This paper distinguishes three types of countries (rich, middle-income, and pre-industrial) and focus on the latter, which, in contrast to the other two, didn’t complete their industrial and capitalist revolutions. Can pre-industrial countries be governed well and embody the principles of consolidated democracies? Today these countries are under pressure from the imperial West to eschew institutions and developmental strategies that, in the past, allowed rich and middle-income countries to industrialize. At the same time, they are pressured by these same Western parties (and by its own people) to be democratic, even though their societies are not mature enough to fulfill that. In fact, no country completed its industrial and capitalist revolution within the framework of even a minimal democracy, suggesting that such demands are unfair. Added to this, pre-industrial countries are extremely difficult to govern because they usually don’t have a strong nation and capable states. This double pressure to renounce development strategies that have worked for the West while being required to become a democracy represents a major obstacle to their development.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Results are reported of the behaviour of the plane tangential grinding process using diamond grinding wheels. Grinding performance is analysed in terms of the wear behaviour of the wheel in the grinding of ceramic. Discussion of the results concentrates on the wear mechanism of the diamond wheel and the process of material removal.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

An alternative for grinding of sintered ceramic is the machining on the green state of the ceramic, which presents easy cutting without the introduction of harmful defects to its mechanical resistance. However, after sintering there are invariably distortions caused by the heterogeneous distribution of density gradients, which are located in the most outlying portions of the compacted workpiece. In order to minimize these density gradients, this study examined the influence of different allowance values and their corresponding influence in distortion after sintering alumina specimens with 99.8 % purity by turning operation using cemented carbide tool. Besides distortion, other output variables were analyzed, such as tool wear, cutting force and surface roughness of green and sintered ceramics. Results showed a distortion reduction up to 81.4%. Green machining is beneficial for reducing surface roughness in both green and sintered states. Cutting tool wear has a direct influence on surface roughness and cutting force.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

A região Amazônica, detentora de grande potencial hídrico, tem atraído indústrias que promovem uso intensivo de água, por isso, existe uma emergência por instrumentos que administrem essa tendência. Neste trabalho foi diagnosticado o nível de racionalização do uso da água pelo setor industrial de produção de bebidas no estado do Pará, assim como as causas do comportamento do setor. As variáveis dependentes (de comportamento) foram classificadas de acordo com quatro dimensões (gestão ambiental, manejo da água, manejo dos efluentes e medidas avançadas de racionalização) que compõe o nível de racionalização da gestão industrial hídrica. As variáveis independentes foram associadas ao: porte, ramo, tipo de embalagem utilizada, disponibilidade hídrica e valor econômico da água. Os dados levantados mostraram que a produção de bebidas tem uma grande pegada hídrica operacional total (acima de) 15.250 m3/dia, com as pequenas empresas apresentando o maior consumo relativo por unidade produzida (maior que 7 L de água/L de bebida). O setor como um todo apresenta baixo nível de racionalização do uso da água, a dimensão mais eficiente é a de gerenciamento da água; entretanto algumas medidas avançadas podem ser visualizadas, especialmente a recirculação da água em torres de resfriamento. A análise das variáveis de estudo demonstra que o nível de racionalização é dependente diretamente do ramo e do porte da empresa. Conclui-se que o consumo tende ao desperdício; em resposta a este quadro, devem ser priorizadas políticas públicas voltadas para internalização dos custos ambientais embutidos no processo.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The present PhD thesis summarizes the three-years study about the neutronic investigation of a new concept nuclear reactor aiming at the optimization and the sustainable management of nuclear fuel in a possible European scenario. A new generation nuclear reactor for the nuclear reinassance is indeed desired by the actual industrialized world, both for the solution of the energetic question arising from the continuously growing energy demand together with the corresponding reduction of oil availability, and the environment question for a sustainable energy source free from Long Lived Radioisotopes and therefore geological repositories. Among the Generation IV candidate typologies, the Lead Fast Reactor concept has been pursued, being the one top rated in sustainability. The European Lead-cooled SYstem (ELSY) has been at first investigated. The neutronic analysis of the ELSY core has been performed via deterministic analysis by means of the ERANOS code, in order to retrieve a stable configuration for the overall design of the reactor. Further analyses have been carried out by means of the Monte Carlo general purpose transport code MCNP, in order to check the former one and to define an exact model of the system. An innovative system of absorbers has been conceptualized and designed for both the reactivity compensation and regulation of the core due to cycle swing, as well as for safety in order to guarantee the cold shutdown of the system in case of accident. Aiming at the sustainability of nuclear energy, the steady-state nuclear equilibrium has been investigated and generalized into the definition of the ``extended'' equilibrium state. According to this, the Adiabatic Reactor Theory has been developed, together with a New Paradigm for Nuclear Power: in order to design a reactor that does not exchange with the environment anything valuable (thus the term ``adiabatic''), in the sense of both Plutonium and Minor Actinides, it is required indeed to revert the logical design scheme of nuclear cores, starting from the definition of the equilibrium composition of the fuel and submitting to the latter the whole core design. The New Paradigm has been applied then to the core design of an Adiabatic Lead Fast Reactor complying with the ELSY overall system layout. A complete core characterization has been done in order to asses criticality and power flattening; a preliminary evaluation of the main safety parameters has been also done to verify the viability of the system. Burn up calculations have been then performed in order to investigate the operating cycle for the Adiabatic Lead Fast Reactor; the fuel performances have been therefore extracted and inserted in a more general analysis for an European scenario. The present nuclear reactors fleet has been modeled and its evolution simulated by means of the COSI code in order to investigate the materials fluxes to be managed in the European region. Different plausible scenarios have been identified to forecast the evolution of the European nuclear energy production, including the one involving the introduction of Adiabatic Lead Fast Reactors, and compared to better analyze the advantages introduced by the adoption of new concept reactors. At last, since both ELSY and the ALFR represent new concept systems based upon innovative solutions, the neutronic design of a demonstrator reactor has been carried out: such a system is intended to prove the viability of technology to be implemented in the First-of-a-Kind industrial power plant, with the aim at attesting the general strategy to use, to the largest extent. It was chosen then to base the DEMO design upon a compromise between demonstration of developed technology and testing of emerging technology in order to significantly subserve the purpose of reducing uncertainties about construction and licensing, both validating ELSY/ALFR main features and performances, and to qualify numerical codes and tools.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Proper hazard identification has become progressively more difficult to achieve, as witnessed by several major accidents that took place in Europe, such as the Ammonium Nitrate explosion at Toulouse (2001) and the vapour cloud explosion at Buncefield (2005), whose accident scenarios were not considered by their site safety case. Furthermore, the rapid renewal in the industrial technology has brought about the need to upgrade hazard identification methodologies. Accident scenarios of emerging technologies, which are not still properly identified, may remain unidentified until they take place for the first time. The consideration of atypical scenarios deviating from normal expectations of unwanted events or worst case reference scenarios is thus extremely challenging. A specific method named Dynamic Procedure for Atypical Scenarios Identification (DyPASI) was developed as a complementary tool to bow-tie identification techniques. The main aim of the methodology is to provide an easier but comprehensive hazard identification of the industrial process analysed, by systematizing information from early signals of risk related to past events, near misses and inherent studies. DyPASI was validated on the two examples of new and emerging technologies: Liquefied Natural Gas regasification and Carbon Capture and Storage. The study broadened the knowledge on the related emerging risks and, at the same time, demonstrated that DyPASI is a valuable tool to obtain a complete and updated overview of potential hazards. Moreover, in order to tackle underlying accident causes of atypical events, three methods for the development of early warning indicators were assessed: the Resilience-based Early Warning Indicator (REWI) method, the Dual Assurance method and the Emerging Risk Key Performance Indicator method. REWI was found to be the most complementary and effective of the three, demonstrating that its synergy with DyPASI would be an adequate strategy to improve hazard identification methodologies towards the capture of atypical accident scenarios.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Immigration and the resulting increasing ethnic diversity have become an important characteristic of advanced industrialised countries. At the same time, the majority of the countries in question are confronted with structural transformation such as deindustrialisation and changes in family structures as well as economic downturn, which limit the capacities of nation-states in addressing rising inequality and supporting those individuals at the margins of the society. This paper addresses both issues, immigration and inequality, by focusing on immigrants’ socio-economic incorporation into the receiving societies of advanced industrialised countries. The aim of this paper is to explain cross-national variation in immigrants’ poverty risks. Drawing on the political economy as well as the migration literature, the paper develops a theoretical framework that considers how the impact of the national labour market and welfare system on immigrants’ poverty risks is moderated by the integration policies, which regulate immigrants’ access to the labour market and social programs (or immigrants’ economic and social rights). The empirical analysis draws on income surveys as well as a newly collected data set on economic and social rights of immigrants in 19 advanced industrialised countries, including European countries as well as Australia, and North America, for the year 2007. As the results from multilevel analysis show, integration policies concerning immigrants’ access to the labour market and social programs can partly explain cross-national variations in immigrants’ poverty risks. In line with the hypothesis, stricter labour market regulations such as minimum wage setting reduce immigrants’ poverty risks stronger in countries where they are granted easier access to the labour market. However, concerning the impact of more generous social programs the reductive poverty effect is stronger in countries with less inclusive access of immigrants to social programs. The paper concludes by discussing possible explanations for this puzzling finding.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Nowadays, computer simulators are becoming basic tools for education and training in many engineering fields. In the nuclear industry, the role of simulation for training of operators of nuclear power plants is also recognized of the utmost relevance. As an example, the International Atomic Energy Agency sponsors the development of nuclear reactor simulators for education, and arranges the supply of such simulation programs. Aware of this, in 2008 Gas Natural Fenosa, a Spanish gas and electric utility that owns and operate nuclear power plants and promotes university education in the nuclear technology field, provided the Department of Nuclear Engineering of Universidad Politécnica de Madrid with the Interactive Graphic Simulator (IGS) of “José Cabrera” (Zorita) nuclear power plant, an industrial facility whose commercial operation ceased definitively in April 2006. It is a state-of-the-art full-scope real-time simulator that was used for training and qualification of the operators of the plant control room, as well as to understand and analyses the plant dynamics, and to develop, qualify and validate its emergency operating procedures.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Preliminary studies have been performed to design a device for nuclear waste transmutation and hydrogen generation based on a gas-cooled pebble bed accelerator driven system, TADSEA (Transmutation Advanced Device for Sustainable Energy Application). In previous studies we have addressed the viability of an ADS Transmutation device that uses as fuel wastes from the existing LWR power plants, encapsulated in graphite in the form of pebble beds, cooled by helium which enables high temperatures (in the order of 1200 K), to generate hydrogen from water either by high temperature electrolysis or by thermochemical cycles. For designing this device several configurations were studied, including several reflectors thickness, to achieve the desired parameters, the transmutation of nuclear waste and the production of 100 MW of thermal power. In this paper new studies performed on deep burn in-core fuel management strategy for LWR waste are presented. The fuel cycle on TADSEA device has been analyzed based on both: driven and transmutation fuel that had been proposed by the General Atomic design of a gas turbine-modular helium reactor. The transmutation results of the three fuel management strategies, using driven, transmutation and standard LWR spent fuel were compared, and several parameters describing the neutron performance of TADSEA nuclear core as the fuel and moderator temperature reactivity coefficients and transmutation chain, are also presented

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Polymer/inorganic nanoparticle nanocomposites have garnered considerable academic and industrial interest over recent decades in the development of advanced materials for a wide range of applications. In this respect, the dispersion of so-called inorganic fullerene-like (IF) nanoparticles, e.g., tungsten disulfide (IF-WS2) or molybdenum disulfide (IF-MoS2), into polymeric matrices is emerging as a new strategy. The surprising properties of these layered metal dichalcogenides such as high impact resistance and superior tribological behavior, attributed to their nanoscale size and hollow quasi-spherical shape, open up a wide variety of opportunities for applications of these inorganic compounds. The present work presents a detailed overview on research in the area of IF-based polymer nanocomposites, with special emphasis on the use of IF-WS2 nanoparticles as environmentally friendly reinforcing fillers. The incorporation of IF particles has been shown to be efficient for improving thermal, mechanical and tribological properties of various thermoplastic polymers, such as polypropylene, nylon-6, poly(phenylene sulfide), poly(ether ether ketone), where nanocomposites were fabricated by simple melt-processing routes without the need for modifiers or surfactants. This new family of nanocomposites exhibits similar or enhanced performance when compared with nanocomposites that incorporate carbon nanotubes, carbon nanofibers or nanoclays, but are substantially more cost-effective, efficient and environmentally satisfactory. Most recently, innovative approaches have been described that exploit synergistic effects to produce new materials with enhanced properties, including the combined use of micro- and nanoparticles such as IF-WS2/nucleating agent or IF-WS2/carbon fiber, as well as dual nanoparticle systems such as SWCNT/IF-WS2 where each nanoparticle has different characteristics. The structure–property relationships of these nanocomposites are discussed and potential applications proposed ranging from medicine to the aerospace, automotive and electronics industries.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The bandwidth achievable by using voltage mode control or current mode control in switch-mode power supply is limited by the switching frequency. Fast transient response requires high switching frequency, although lower switching frequencies could be more suitable for higher efficiency. This paper proposes the use of hysteretic control of the output capacitor $(C_{out})$ current to improve the dynamic response of the buck converter. An external voltage loop is required to accurately regulate the output voltage. The design of the hysteretic loop and the voltage loop are presented. Besides, it is presented a non-invasive current sensor that allows measuring the current in the capacitor. This strategy has been applied for DVS (dynamic voltage scaling) on a 5 MHz buck converter. Experimental results validate the proposed control technique and show fast transient response from 1.5 V to 2.5 V in 2 $mu{rm s}$.