Euglenophytes in aquaculture ponds - their ecology and role in fish production

The ecology of euglenophytes and their role in fish production were studied in 12 small earthen ponds beside the Faculty of Fisheries, BAU from July to November 2001. Four experiments each with three replications were conducted and those were as follows: pond treated with both poultry droppings and cowdung (T1); pond treated with only poultry droppings (T2), and pond treated with only poultry droppings (T3), while the control (T4) where no organic manure was applied. Fishes comprising of rohu (Labeo rohita), catla ( Catla catla), mrigal ( Cirrhinus cirrhosus), silver carp (Hypophthalmichthys molitrix) and silver barb (Barbonymus gonionotus) were stocked at the same stocking density of (10,621 fish/ha) and species ratio (1:1:1:2:2). The stocked fishes were fed with a common supplemental diet comprising of mustard oil cake and rice polish (1:1) at the rate of 4% of body weight per day. The highest cell density of euglenophytes was found in the ponds of T2, where poultry droppings were applied and was followed by T1, where both poultry droppings and cow dung were applied. Higher temperature, nitrate-nitrogen, phosphate-phosphorous and acidic pH were found to be conducive for the bloom of noxious euglenophytes. The bloom was found to use up most of the nutrients resulting in reduction in the growth of beneficial plankters and planktivorous fishes. The SGR (%/day) of catla, rohu and mrigal was lower during heavy bloom period while that of silver carp and silver barb were comparatively higher. The mortality of fishes in a pond of T2 during the bloom period was possibly due to formation of anoxic situation (dissolved oxygen level as low as 0.34 mg/1) in the early mornings through bacterial decomposition of the settled dead individuals or due to the combined effect of anoxic situation and toxic metabolite secretion by the euglenophytes.

Purif ication and Characterization of Jerdonitin ,a Non2hemorrhagic Metalloproteinase fromTrimeresurus jerdonii Venom

以前从菜花烙铁头蛇毒中分离纯化到J erdonitin 。与其他Ⅱ型蛇毒金属蛋白酶相比, J erdonitin 由金属蛋白酶和去整合素两个结构域组成。但没有检测到其出血和纤维蛋白原降解活性, 推测可能高压液相色谱的有机溶液影响了其酶活性。采用不含高压液相色谱柱层析的新分离手段分离得到J erdonitin 。J erdonitin 在还原和非还原SDS2PAGE 电泳中分别呈现一条表观分子量为38 和36 kDa 的条带。像其他典型的蛇毒金属蛋白酶一样, J erdonitin 优先降解人纤维蛋白原的alpha 链, 并且该活性能被EDTA 完全抑制, 而PMSF 对其没有影响。J er2 donitin 不诱导小白鼠皮下出血。

Effects of black Bengal goat manure on growth and production of Genetically Improved Farmed Tilapia (GIFT) starin [sic], Oreochromis niloticus

In a goat-tilapia integrated farming system, the effect of Black Bengal goat manure on the growth and production of Oreochromis niloticus was studied at the Freshwater Substation, Shantahar, Bogra for 4.5 months. The stocking density used in three treatments were, 200 goats and 15,000 GIFT strain/ha (T1); 300 goats and 15,000 GIFT strain/ha (T2); and only 15,000 GIFT strain/ha (T3). The initial individual total length and weight of stocked tilapia were 7.6 cm and 11.34 g, respectively. Twelve ponds each having an area of 40 square meters were used for this trail [sic]. On one side of each pond goat shed was constructed and the space allocated for each goat was 0.75 m x 1.5 m. Newly weaned black Bengal goats of average weight 8.45 kg was used in the trial. Every morning the goats manure was swiped out in ponds through the fixed opening of bamboo made floor of goat shed. Water depth of the ponds was maintained at 0.75 m. The highest fish production was in treatment 1 (1,750 kg/ha) followed by treatment 2 (1,455 kg/ha) and treatment 3 (621 kg/ha). The difference in individual goat weight was not significant (P>0.05) among treatments 1 and 2.

巴氯芬对慢性吗啡依赖后条件化位置偏好和戒断症状的抑制

小鼠连续7天腹腔注射吗啡(40mg/kg)建立条件化位置偏好模型,连续皮下递增注射吗啡(25、50、75、100、125、150mg/kg),成瘾后腹腔注射纳络酮(6mg/kg)诱导戒断症状(跳跃行为)建立戒断模型.腹腔注射GABAB受体激动剂巴氯芬(2 mg/kg)可以有效地抑制吗啡诱导的条件化位置偏好和减轻纳络酮诱导的戒断症状,结果表明GABA系统参与动物成瘾后渴求和戒断过程,激动GABAB受体可以在一定程度上抑制成瘾的心理和生理戒断症状.

MANDIBULAR MORPHOMETRICS AMONG MACAQUES - THE CASE OF MACACCA-THIBETANA

Recent field studies suggest that Macaca thibetana, a large endemic Chinese macaque, may be quite folivorous, distinguishing it from most other macaque species, which tend to be primarily frugivorous. To understand how this diet affects its masticatory system, we conducted a comparative morphometric study of mandibular dimensions. We took linear measurements from male and female mandibles of this species as well as four other macaques-M. fascicularis, M. nemestrina, M. arctoides, and M. assamensis-and four species of Presbytis-P. obscura, P. rubicunda, P. cristata, and P. phayrei-and subjected to them to a variety of analyses. Based on analyses of variances and discriminant analyses on each sex individually, the mandible of M. thibetana corresponds to expected patterns for folivorous primates with respect to its wide condyles and thick corpora: However, the height of the corpus and symphysis are lower, and the anteroposterior length of the condyle is longer than predicted for a folivore. In addition to interpretations specifically relating to M. thibetana, we also discuss the functional morphology of the other species in light of what is published about their diets.

Ultrasonic imaging of 3D displacement vectors using a simulated 2D array and beamsteering.

Most quasi-static ultrasound elastography methods image only the axial strain, derived from displacements measured in the direction of ultrasound propagation. In other directions, the beam lacks high resolution phase information and displacement estimation is therefore less precise. However, these estimates can be improved by steering the ultrasound beam through multiple angles and combining displacements measured along the different beam directions. Previously, beamsteering has only considered the 2D case to improve the lateral displacement estimates. In this paper, we extend this to 3D using a simulated 2D array to steer both laterally and elevationally in order to estimate the full 3D displacement vector over a volume. The method is tested on simulated and phantom data using a simulated 6-10MHz array, and the precision of displacement estimation is measured with and without beamsteering. In simulations, we found a statistically significant improvement in the precision of lateral and elevational displacement estimates: lateral precision 35.69μm unsteered, 3.70μm steered; elevational precision 38.67μm unsteered, 3.64μm steered. Similar results were found in the phantom data: lateral precision 26.51μm unsteered, 5.78μm steered; elevational precision 28.92μm unsteered, 11.87μm steered. We conclude that volumetric 3D beamsteering improves the precision of lateral and elevational displacement estimates.

Ultrasonic imaging of 3D displacement vectors using a simulated 2D array and beamsteering

Most quasi-static ultrasound elastography methods image only the axial strain, derived from displacements measured in the direction of ultrasound propagation. In other directions, the beam lacks high resolution phase information and displacement estimation is therefore less precise. However, these estimates can be improved by steering the ultrasound beam through multiple angles and combining displacements measured along the different beam directions. Previously, beamsteering has only considered the 2D case to improve the lateral displacement estimates. In this paper, we extend this to 3D using a simulated 2D array to steer both laterally and elevationally in order to estimate the full 3D displacement vector over a volume. The method is tested on simulated and phantom data using a simulated 6-10 MHz array, and the precision of displacement estimation is measured with and without beamsteering. In simulations, we found a statistically significant improvement in the precision of lateral and elevational displacement estimates: lateral precision 35.69 μm unsteered, 3.70 μm steered; elevational precision 38.67 μm unsteered, 3.64 μm steered. Similar results were found in the phantom data: lateral precision 26.51 μm unsteered, 5.78 μm steered; elevational precision 28.92 μm unsteered, 11.87 μm steered. We conclude that volumetric 3D beamsteering improves the precision of lateral and elevational displacement estimates. © 2012 Elsevier B.V. All rights reserved.

Experimental studies of the quench behaviour of MgB2 superconducting wires for fault current limiter applications

Various MgB2 wires with different sheath materials provided by Hyper Tech Research Inc., have been tested in the superconducting fault current limiter (SFCL) desktop tester at 24-26K in a self-field. Samples 1 and 2 are similarly fabricated monofilamentary MgB2 wires with a sheath of CuNi, except that sample 2 is doped with SiC and Mg addition. Sample 3 is a CuNi sheathed multifilamentary wire with Cu stabilization and Mg addition. All the samples with Nb barriers have the same diameter of 0.83mm and superconducting fractions ranging from 15% to 27% of the total cross section. They were heat-treated at temperatures of 700 °C for a hold time of 20-40min. Current limiting properties of MgB2 wires subjected to pulse overcurrents have been experimentally investigated in an AC environment in the self-field at 50Hz. The quench currents extracted from the pulse measurements were in a range of 200-328A for different samples, corresponding to an average engineering critical current density (Je) of around 4.8 × 10 4Acm-2 at 25K in the self-field, based on the 1νVcm-1 criterion. This work is intended to compare the quench behaviour in the Nb-barrier monofilamentary and multifilamentary MgB2 wires with CuNi and Cu/CuNi sheaths. The experimental results can be applied to the design of fault current limiter applications based on MgB2 wires. © IOP Publishing Ltd.

海洋喇叭虫rRNA基因18S -ITS1序列及其系统发育分析(英文)

海洋喇叭虫Maristentordinoferus 1996年在关岛(Guam)的珊瑚暗礁上被发现 ,至今尚未阐明其确切的系统发育地位。克隆到的海洋喇叭虫的 18S ITS1 5 8SrDNA序列包括 2 2 2bp的 18S序列 ,77bp的ITS1序列和 2 2bp的 5 8S序列。比较分析了纤毛虫主要类群的ITS1序列后得出 :短的ITS1序列可能是异毛类纤毛虫的特征。根据 18S序列 ,利用邻接法构建 ,最大简约法和最大似然法构建系统发育树。其拓扑结构显示海洋喇叭虫属于异毛纲纤毛虫 ,但并不隶属喇