Curie Transition Of Nc Nickel By Mechanical Spectroscopy And Magnetization Study

Mechanical spectroscopy measurement is performed to study the internal friction of nanocrystalline ( NC) nickel with an average grain size of 23 nm from room temperature to 610 K. An internal friction peak is observed at about 550 K, which corresponds to the Curie transition process of the NC nickel according to the result of magnetization test. Moreover, the fact that the Curie temperature of NC nickel is lower than that of coarse-grained nickel is explained by an analytical model based on the weakening of cohesive energy.

Recognition of double helical DNA by purine oligonucleotides via triple helix formation

Oligonucleotide-directed triple helix formation is one of the most versatile methods for the sequence specific recognition of double helical DNA. Chapter 2 describes affinity cleaving experiments carried out to assess the recognition potential for purine-rich oligonucleotides via the formation of triple helices. Purine-rich oligodeoxyribonucleotides were shown to bind specifically to purine tracts of double helical DNA in the major groove antiparallel to the purine strand of the duplex. Specificity was derived from the formation of reverse Hoogsteen G•GC, A•AT and T•AT triplets and binding was limited to mostly purine tracts. This triple helical structure was stabilized by multivalent cations, destabilized by high concentrations of monovalent cations and was insensitive to pH. A single mismatched base triplet was shown to destabilize a 15 mer triple helix by 1.0 kcal/mole at 25°C. In addition, stability appeared to be correlated to the number of G•GC triplets formed in the triple helix. This structure provides an additional framework as a basis for the design of new sequence specific DNA binding molecules.

In work described in Chapter 3, the triplet specificities and required strand orientations of two classes of DNA triple helices were combined to target double helical sequences containing all four base pairs by alternate strand triple helix formation. This allowed for the use of oligonucleotides containing only natural 3'-5' phosphodiester linkages to simultaneously bind both strands of double helical DNA in the major groove. The stabilities and structures of these alternate strand triple helices depended on whether the binding site sequence was 5'-(purine)_m (pyrimidine)_n-3' or 5'- (pyrimidine)_m (purine)_n-3'.

In Chapter 4, the ability of oligonucleotide-cerium(III) chelates to direct the transesterfication of RNA was investigated. Procedures were developed for the modification of DNA and RNA oligonucleotides with a hexadentate Schiff-base macrocyclic cerium(III) complex. In addition, oligoribonucleotides modified by covalent attachment of the metal complex through two different linker structures were prepared. The ability of these structures to direct transesterification to specific RNA phosphodiesters was assessed by gel electrophoresis. No reproducible cleavage of the RNA strand consistent with transesterification could be detected in any of these experiments.

X-shaped third harmonic generated by ultrashort infrared pulse filamentation in air

The authors report the measurement of the angularly resolved spectrum of the third harmonic generated in a femtosecond filament in air and its evolution with increasing pump power. Pumped by a focused infrared ultrashort pulse with a carrier wavelength of 1270 nm, a pulse duration of similar to 20 fs, and pulse energy up to 487 mu J, the generated third harmonic is composed of an on-axis emission and a conical ring emission. When the pump power is sufficiently high, angularly resolved spectra with significant X-like feature could be observed, indicating the formation of nonlinear X wave at third harmonic. (c) 2008 American Institute of Physics.

The Economic Impacts of Biodiversity Policy for Improving the Climate Regulating Services Provided by EU Natura 2000 Habitats

22 p.

A new synoptic survey of Northern Ireland lakes: sampling from the air

Northern Ireland has approximately 1670 lakes, which cover 4.4% of the land surface. However, most of the water area is accounted for by the large lakes such as Lough Neagh (385 km2) and Lower Lough Erne (109.5 km ). The majority of lakes are less than 100 hectares in area. They tend to be distributed towards the south and west of the Province, where extensive drumlin swarms are rich in small waterbodies. In 1988-1991, 610 of the 708 lakes between one and 100 hectares were sampled by the Northern Ireland Lake Survey. The objective was to assess their conservation status based on their aquatic macrophyte flora, but in addition to extensive plant surveys, the water of each lake was analysed for a range of chemical variables. This article reports on a full-scale survey carried out in early March 2002. The survey was taken with help of two helicopters. The authorise summarise the results of the chemical analysis of the survey.

Sensitivity to alcohols of a planar waveguide ring resonator fabricated by a sol-gel method

A planar waveguide ring resonator was fabricated by organic-inorganic hybrid sol-gel materials; its sensitivity to ethanol vapor was experimentally investigated. It was found that dips in the transmission spectrum of the device shifted to longer wavelengths with increasing the ethanol concentration, and its sensitivity showed a linear relation with the ethanol concentration, showing a coefficient of 1.13 pm/ppm. In addition, the transmission loss of the ring resonator decreased with increasing the ethanol concentration. The measured characteristics suggest that the device may be considered as one of the candidates of alcohol vapor sensors. (c) 2006 Elsevier B.V. All rights reserved.

一种检测光刻机激光干涉仪测量系统非正交性的新方法

提出一种精确检测光刻机激光干涉仪测量系统非正交性的新方法。将对准标记曝光到硅片表面并进行显影;利用光学对准系统测量曝光到硅片上的对准标记理论曝光位置与实际读取位置的偏差;由推导的位置偏差与非正交因子、坐标轴尺度比例、过程引入误差的线性模型,根据最小二乘原理计算出干涉仪测量系统的非正交性。实验结果表明,利用该方法使用同一硅片在不同旋转角下进行测量,干涉仪测量系统非正交因子的测量重复精度优于0.01 μrad,坐标轴尺度比例的测量重复精度优于0.7×10-6。使用不同的硅片进行测量,非正交因子的测量再现性优于

DIFFERENTIAL GEOMETRICAL METHODS IN THE STUDY OF OPTICAL-TRANSMISSION (SCALAR THEORY) .2. TIME-DEPENDENT TRANSMISSION THEORY

By generalization of the methods presented in Part I of the study [J. Opt. Soc. Am. A 12, 600 (1994)] to the four-dimensional (4D) Riemannian manifold case, the time-dependent behavior of light transmitting in a medium is investigated theoretically by the geodesic equation and curvature in a 4D manifold. In addition, the field equation is restudied, and the 4D conserved current of the optical fluid and its conservation equation are derived and applied to deduce the time-dependent general refractive index. On this basis the forces acting on the fluid are dynamically analyzed and the self-consistency analysis is given.

Raman spectroscopic investigation of pure and ytterbium-doped rare earth silicate crystals

Raman spectroscopy was used to study the molecular structure of a series of selected rare earth (RE) silicate crystals including Y2SiO5 (YSO), LU2SiO5 (LSO), (Lu0.5Y0.5)(2)SiO5 (LYSO) and their ytterbium-doped samples. Raman spectra show resolved bands below 500 cm(-1) region assigned to the modes of SiO4 and oxygen vibrations. Multiple bands indicate the nonequivalence of the RE-O bonds and the lifting of the degeneracy of the RE ion vibration. Low intensity bands below 500 cm(-1) are an indication of impurities. The (SiO4)(4-) tetrahedra are characterized by bands near 200 cm(-1) which show a separation of the components of nu(4) and nu(2), in the 500-700 cm(-1) region which are attributed to the distorting bending vibration and in the 880-1000 cm(-1) region which are attributed to the symmetric and antisymmetric stretching vibrational modes. The majority of the bands in the 300-610 cm(-1) region of Re2SiO5 were found to arise from vibrations involving both Si and RE ions, indicating that there is considerable mixing of Si displacements with Si-O bending modes and RE-0 stretching modes. The Raman spectra of RE silicate crystals were analyzed in terms of the molecular structure of the crystals, which enabled separation of the bands attributed to distinct vibrational units. Copyright (C) 2007 John Wiley & Sons, Ltd.

A importância da caraterização geoambiental para elaboração de planejamento territorial ambiental: o exemplo do primeiro distrito do município de Rio Bonito (RJ)

O crescimento populacional acelerado e a imposição do mercado regional e global no município de Rio Bonito (RJ) proporcionaram alterações no seu espaço territorial. As observações cotidianas e a análise dos mapas e imagens de satélites do município trouxeram questionamentos sobre a organização territorial em face de novos empreendimentos e a situação ambiental. Com essas demandas diferenciadas surge a necessidade de estudos integrados para se caracterizar em escala local as problemáticas com o uso e cobertura da terra e tentar oferecer possibilidades de reorganização numa visão holística de todo o processo, que é dinâmico. A caracterização com uma perspectiva sistêmica, nesse estudo, recebe o nome de Geoambiental. O município de Rio Bonito está localizado no Estado do Rio de Janeiro e possui uma área total de 456,45 km2. É dividido em três distritos: Sede, Boa Esperança e Basílio. O trabalho em questão busca um entendimento sobre as condições ambientais das unidades de paisagem no Primeiro Distrito, a fim de subsidiar alternativas de um desenvolvimento sustentável. A pesquisa teve como objetivo principal demonstrar a importância da Caracterização Geoambiental para realização de planejamento territorial em consonância com a preservação ambiental. Além disso, buscou-se realizar análise do uso e cobertura da terra, identificar vulnerabilidades e estabilidades das Unidades Geoambientais e identificar alternativas viáveis para as questões socioambientais e que tenham como base a compreensão da dinâmica local, as relações sociais e passivos ambientais. A metodologia utilizada consistiu na determinação das Unidades Geoambientais com base na revisão bibliográfica, observação de campo, análise de imagens de satélite, dos mapas geomorfológicos, de drenagem e altimétricos. As informações obtidas foram analisadas para geração de banco de dados digitais no Sistema de Informações Geográficas (SIG), associadas com informações socioeconômicas. A disponibilidade do banco de dados possibilitou a geração de camadas temáticas pela aplicação de rotinas computacionais específicas, permitindo a sua atualização constante. As informações referentes à geologia, geomorfologia, hidrografia, clima, solo, vegetação, recursos minerais foram selecionadas e sistematizadas para a análise das Unidades Geoambientais. A análise do uso e cobertura do solo do Primeiro Distrito revelou que em 2011 as pastagens ocupavam 14.610 ha (67,89%), seguido da floresta com 4.039 ha (18,76%), vegetação secundária e pastagem com 1.848 ha (8,58%) e ocupação urbana de média e baixa densidade, somadas, com 999 ha (4,63%). A caracterização do uso e cobertura do solo é indispensável para compreensão da organização espacial e planejamento de uma gestão ambiental, considerando que a implantação do Complexo Petroquímico do Rio de Janeiro (COMPERJ) demandará aumento de população e conseqüente sobrecarga na infraestrutura básica municipal. A análise do uso e cobertura demonstrou que os principais problemas das Unidades Geoambientais são decorrentes do uso inadequado da terra em relação as suas potencialidades. O estudo demonstrou, portanto que, a realização de estudos integrados do espaço geográfico pode ser efetuada, sendo necessário lembrar a relevância de se compreender a dinâmica do ambiente para a realização de projetos municipais com vistas a um planejamento territorial sustentável.

Estudo experimental de wetlands construídos como unidade de polimento no tratamento de lixiviados de aterros sanitários.

A grande quantidade de resíduos sólidos gerados nas cidades é um desafio para o saneamento ambiental no Brasil. A fim de se reduzir os impactos gerados ao meio ambiente e à saúde pública, é necessário que haja um gerenciamento adequado, desde a coleta até a disposição final, desses resíduos sólidos urbanos. Os aterros sanitários permitem um maior controle ambiental, desde que sejam bem projetados e operados. A decomposição da matéria orgânica presente nesses resíduos, somada às águas das chuvas gera o lixiviado, líquido com alto potencial poluidor. Várias formas de tratamento são propostas com a finalidade de tornar o lixiviado menos poluente ao meio ambiente. Wetlands construídos tem se mostrado uma alternativa eficiente para a remoção de poluentes em lixiviados, além dos baixos custos operacionais e de implantação. O presente estudo investigou o uso de wetlands subsuperficiais em escala-piloto para o tratamento de um lixiviado prétratado. Os wetlands foram monitorados com a finalidade de se obter remoções de matéria orgânica e nitrogênio amoniacal. As maiores reduções percentuais de concentração de nitrogênio amoniacal, DQO e COD foram, 91%, 42% e 35%, respectivamente. As maiores reduções percentuais em carga de nitrogênio amoniacal e DQO foram, 67% e 50%, respectivamente. Os resultados dos ensaios de toxicidade realizados com os organismos Vibrio fischeri e Danio rerio revelaram que, a toxicidade do lixiviado foi reduzida ao ser tratado pelo wetland.