Formation of nanoparticles from ultrafast laser condensates of metal targets

Optimised ultrafast laser ablation can result in almost complete ionisation of the target material and the formation of a high velocity plasma jet. Collisions with the ambient gas behind the shock front cools the material resulting in the formation of mainly spherical, single crystal nanoscale particles in the condensate. This work characterises the nanoscale structures produced by the ultrafast laser interactions in He atmospheres at STP with Ni and Al. High resolution transmission electron microscopy was employed to study the microstructure of the condensates and to classify the production of particles forms as a function of the illumination conditions.

Molecular Dynamics Study Of The Mechanical Behavior Of Nickel Nanowire: Strain Rate Effects

We present the analysis of uniaxial deformation of nickel nanowires using molecular dynamics simulations, and address the strain rate effects on mechanical responses and deformation behavior. The applied strain rate is ranging from 1 x 10(8) s(-1) to 1.4 x 10(11) s(-1). The results show that two critical strain rates, i.e., 5 x 10(9) s(-1) and 8 x 10(10) s(-1), are observed to play a pivotal role in switching between plastic deformation modes. At strain rate below 5 x 10(9) s(-1), Ni nanowire maintains its crystalline structure with neck occurring at the end of loading, and the plastic deformation is characterized by {111} slippages associated with Shockley partial dislocations and rearrangements of atoms close to necking region. At strain rate above 8x10(10) s(-1), Ni nanowire transforms from a fcc crystal into a completely amorphous state once beyond the yield point, and hereafter it deforms uniformly without obvious necking until the end of simulation. For strain rate between 5 x 10(9) s(-1) and 8 x 10(10) s(-1), only part of the nanowire exhibits amorphous state after yielding while the other part remains crystalline state. Both the {111} slippages in ordered region and homogenous deformation in amorphous region contribute to the plastic deformation. (C) 2007 Published by Elsevier B.V.

Space experiments of thermocapillary convection in two-liquid layers

In 1999, the space experiments on the Marangoni convection and thermocapillary convection in a system of two immiscible liquid layers in microgravity environment were conducted on board the Chinese scientific satellite SJ-5. A new system of two-layer liquids such as FC-70 liquid and paraffin was used successfully, with the paraffin melted in the space. Two different test-cells are subjected to a temperature gradient perpendicular or parallel to the interface to study the Marangoni convection and thermocapillary convection, respectively. The experimental data obtained in the first Chinese space experiment of fluid are presented. Two-dimensional numerical simulations of thermocapillary convections are carried out using SIMPLEC method A reasonable agreement between the experimental investigation and the numerical results is obtained.

共转圈上星系密度波的“隧道效应”及Waser机制的开关特性

本文处理了在星系动力学中提出的一类非线性复特征值问题.求得了一致有效渐近解及量子化条件,分析了波在共转圈附近的传播特性,从而阐明了密度波在共转圈势垒中的“隧道效应”以及Waser机制的一种“开关特性”,这些物理特性在星系螺旋结构的动力学理论中具有十分重要的意义.

Fatigue crack-growth from a circular notch under high-levels of biaxial stress

A series of experiments have been conducted on cruciform specimens to investigate fatigue crack growth from circular notches under high levels of biaxial stress. Two stress levels (Δσ₁= 380 and 560 MPa) and five stress biaxialities (λ=+1.0, +0.5, 0, −0.5 and −1.0; where λ=σ₂/σ₁ were adopted in the fatigue tests in type 316 stainless steel having a monotonic yield strength of 243 MPa. The results reveal that fatigue crack growth rates are markedly influenced by both the stress amplitude and the stress biaxiality. A modified model has been developed to describe fatigue crack growth under high levels of biaxial stress.

Static and fatigue failure behavior of carbon-fiber reinforced epoxy composite-materials with edge notch

A study of carbon fiber reinforced epoxy composite material with 0° ply or ±45°ply(unnotched or with edge notch) was carried out under static tensile and tension-tensioncyclic loading testing. Static and fatigue behaviour and damage failure modes in unnotched/notched specimens plied in different manners were analysed and compared with each other.A variety of techniques (acoustic emission, two types of strain extensometer, high speed pho-tography, optical microscopy, scanning electron microscope, etc.) were used to examine thedamage of the laminates. Experimental results show that when these carbon/epoxy laminateswith edge notch normal to the direction of the load are axially loaded in static or fatiguetension, the crack does not propagate along the length of notch but is in the interface (fiberdirection). The notch has no substantial effect on the stresses at the unnotched portion. Thedamage failure mechanism is discussed.

[A_Vitoria_SantaMaria] Documentación geométrica de las excavaciones de la Catedral de Santa María (Vitoria-Gasteiz). Mayo 2000-Junio 2003

[ES] Información sobre este proyecto ha servido de base a los siguientes artículos:

Mollusks taken by Beam Trawl in the vicinity of Gray's Reef National Marine Sanctuary on the Continental Shelf off Georgia, Southeastern U.S.

Mollusks were sorted from samples of shell hash (obtained as bycatch during NOAA-sponsored studies of larval and juvenile fish distribution), and analyzed to gain qualitative insights on species composition, distribution and habitat affinities of the molluscan fauna on the continental shelf off Georgia. Samples came from beam trawls at 37 stations located in the immediate vicinity and offshore of the Gray’s Reef National Marine Sanctuary (GRNMS) at depths of 4.9 to 103 m. Two hundred sixty-three (263) taxa of mollusks (~58% as dead shells only) were collected, and nearly all (~99%) were identified to the species level. Ninety-seven of these taxa appeared in samples from one or more of the four stations established near the corners of the GRNMS. Samples were highly variable in terms of appearance, volume and species composition of mollusks, reflecting the extreme patchiness of benthic habitats within this region of the continental shelf. With very few exceptions, the mollusks were generally characteristic of either the Carolinian or Caribbean faunal provinces. The Georgia continental shelf, however, was outside the previously reported ranges for at least 16 of the species reported here. Most of these extralimital species were known previously from the East Coast of Florida, and represented northerly range extensions of 1-5° Latitude (110-560 km). One species represented a more significant range extension from the Bahamas and the southern Caribbean, and two represented southerly range extensions, known previously from only as close as off North Carolina. The high incidence of range extensions found in this study and the potential for discovery of additional species are discussed in the context of the diversity and patchiness of benthic habitats on the continental shelf of the region, and the sensitivity of species recruitment to variability in Gulf Stream patterns and global climate change. (PDF contains 52 pages)

Helena de Eurípides y los roles de género

Le Rane : Collana di Studi e Testi. Studi ; 55 - El teatro clásico en el marco de la cultura griega y su pervivencia en la cultura occidental ; 13

The relationship between otolith increments and time for yellowfin and skipjack tuna marked with tetracycline

ENGLISH: The rate at which increments are deposited on the sagittal otoliths of yellowfin (Thunnus albacares) and skipjack (Katsuwonus p elamis) tunas is determined by a markrecapture experiment using tetracycline. During growth in fork length from 40 to 110 em, and for a period of up to 389 days, yellowfin of the Revillagigedo Islands- Baja California region deposit one increment per day in either the postrostrum or rostrum position of the otolith. For skipjack of the same region, rostrum increments underestimate time by approximately 24 percent during growth from 42 to 64 cm and over the maximum interval of 249 days. The growth rate of each species is estimated from the recapture fork length and the linear change in an otolith dimension following tetracycline injection. Over specific ranges in fork length the rates are 3.06 and 1.15 em per month for yellowfin and skipjack, respectively. SPANISH: La rapidez (tasa) en la que se depositan los incrementos en los otolitos sagitales del aleta amarilla (Thunnus albacares) y el barrilete (Katsuwonus pelamis) se determina mediante un experimento al recapturar los peces que han sido marcados con tetraciclina. Durante el crecimiento de la longitud de horquilla de 40 a 110 cm y por un período hasta de 389 días, se forma en el aleta amarilla de la región de las Islas Revillagigedo-Baja California, un incremento diario ya sea en el parte del postrostrum o rostrum de los otolitos. Con respecto al barrilete de la misma region los incrementos en el rostrum subestiman aproximadamente el tiempo en un 24 por ciento durante el crecimiento de 42 a 64 cm y sobre un intervalo máximo de 249 días. El índice de crecimiento de cada especie se estima en la recaptura según la longitud de horquilla y el cambio lineal en la dimensión de un otolito después de la inyección de tetraciclina. La variación específica sobre la longitud de horquilla de los índices son 3.06 y 1.15 cm por mes para el aleta amarilla y el barrilete, respectivamente. (PDF contains 54 pages.)