Particle size, morphology and color tunable ZnO:Eu3+ nanophosphors via plant latex mediated green combustion synthesis

Efficient ZnO:Eu3+ (1-11 mol%) nanophosphors were prepared for the first time by green synthesis route using Euphorbia tirucalli plant latex. The final products were well characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR), etc. The average particle size of ZnO:Eu3+ (7 mol%) was found to be in the range 27-47 nm. With increase of plant latex, the particle size was reduced and porous structure was converted to spherical shaped particles. Photoluminescence (PL) spectra indicated that the peaks situated at similar to 590, 615, 648 and 702 nm were attributed to the D-5(0) -> F-7(j(j=1,2,3,4)) transitions of Eu3+ ions. The highest PL intensity was recorded for 7 mol% with Eu3+ ions and 26 ml plant latex concentration. The PL intensity increases with increase of plant latex concentration up to 30 ml and there after it decreases. The phosphor prepared by this method show spherical shaped particles, excellent chromaticity co-ordinates in the white light region which was highly useful for WLED's. Further, present method was reliable, environmentally friendly and alternative to economical routes. (c) 2013 Elsevier B.V. All rights reserved.

Conflict-tolerant specifications for hybrid systems

We propose a framework for developing and reasoning about hybrid systems that are comprised of a plant with multiple controllers, each of which controls the plant intermittently. The framework is based on the notion of a ``conflict tolerant'' specification for a controller, and provides a modular way of developing and reasoning about such systems. We propose a novel mechanism of defining conflict-tolerant specifications for general hybrid systems, using ``acceptor'' and ``advisor'' components. We also give a decision procedure for verifying whether a controller satisfies its conflict-tolerant specification, in the special case when the components are modeled using initialized rectangular hybrid automata.

Quantum Phase Diagram of One-Dimensional Spin and Hubbard Models with Transitions to Bond Order Wave Phases

Similar quantum phase diagrams and transitions are found for three classes of one-dimensional models with equally spaced sites, singlet ground states (GS), inversion symmetry at sites and a bond order wave (BOW) phase in some sectors. The models are frustrated spin-1/2 chains with variable range exchange, half-filled Hubbard models with spin-independent interactions and modified Hubbard models with site energies for describing organic charge transfer salts. In some range of parameters, the models have a first order quantum transition at which the GS expectation value of the sublattice spin < S-A(2)> of odd or even-numbered sites is discontinuous. There is an intermediate BOW phase for other model parameters that lead to two continuous quantum transitions with continuous < S-A(2)>. Exact diagonalization of finite systems and symmetry arguments provide a unified picture of familiar 1D models that have appeared separately in widely different contexts.

Quantum Phase Diagram of One-Dimensional Spin and Hubbard Models with Transitions to Bond Order Wave Phases

Similar quantum phase diagrams and transitions are found for three classes of one-dimensional models with equally spaced sites, singlet ground states (GS), inversion symmetry at sites and a bond order wave (BOW) phase in some sectors. The models are frustrated spin-1/2 chains with variable range exchange, half-filled Hubbard models with spin-independent interactions and modified Hubbard models with site energies for describing organic charge transfer salts. In some range of parameters, the models have a first order quantum transition at which the GS expectation value of the sublattice spin < S-A(2)> of odd or even-numbered sites is discontinuous. There is an intermediate BOW phase for other model parameters that lead to two continuous quantum transitions with continuous < S-A(2)>. Exact diagonalization of finite systems and symmetry arguments provide a unified picture of familiar 1D models that have appeared separately in widely different contexts.

EESM-Based Link Adaptation in Point-to-Point and Multi-Cell OFDM Systems: Modeling and Analysis

In contemporary wideband orthogonal frequency division multiplexing (OFDM) systems, such as Long Term Evolution (LTE) and WiMAX, different subcarriers over which a codeword is transmitted may experience different signal-to-noise-ratios (SNRs). Thus, adaptive modulation and coding (AMC) in these systems is driven by a vector of subcarrier SNRs experienced by the codeword, and is more involved. Exponential effective SNR mapping (EESM) simplifies the problem by mapping this vector into a single equivalent fiat-fading SNR. Analysis of AMC using EESM is challenging owing to its non-linear nature and its dependence on the modulation and coding scheme. We first propose a novel statistical model for the EESM, which is based on the Beta distribution. It is motivated by the central limit approximation for random variables with a finite support. It is simpler and as accurate as the more involved ad hoc models proposed earlier. Using it, we develop novel expressions for the throughput of a point-to-point OFDM link with multi-antenna diversity that uses EESM for AMC. We then analyze a general, multi-cell OFDM deployment with co-channel interference for various frequency-domain schedulers. Extensive results based on LTE and WiMAX are presented to verify the model and analysis, and gain new insights.

In-situ synthesized poly(vinyl butyral)/MMT-clay nanocomposites: The role of degree of acetalization and clay content on thermal, mechanical and permeability properties of PVB matrix

Poly(vinyl butyral) - MMT clay nanocomposites were synthesized in situ with three different degrees of acetalization and with varying clay content for each vinyl butyral polymer ratio. The clay nano-platelet galleries were expanded, as determined by X-ray diffraction and TEM analysis. The glass transition temperature of the polymer nanocomposites were found to be similar to 56 degrees C and similar to 52 degrees C for the neat polymer and the 4% clay loaded samples, respectively. The 4 wt% clay loaded film showed higher strength and low strain to failure. The dynamic mechanical analysis also confirmed the improved stability of the matrix. The matrix with 0.5 butyral to alcohol ratio for 4 wt% clay exhibited good water vapor transmission compared to all other compositions. The encapsulated devices with 2.5 and 4 wt% clay loaded films increases the device life time and the efficiencies of these films were 50% higher than their encapsulated pristine polymer films. (C) 2015 Elsevier Ltd. All rights reserved.

Segregating Discourse Segments from Engineering Documents for Knowledge Acquisition

The broader goal of the research being described here is to automatically acquire diagnostic knowledge from documents in the domain of manual and mechanical assembly of aircraft structures. These documents are treated as a discourse used by experts to communicate with others. It therefore becomes possible to use discourse analysis to enable machine understanding of the text. The research challenge addressed in the paper is to identify documents or sections of documents that are potential sources of knowledge. In a subsequent step, domain knowledge will be extracted from these segments. The segmentation task requires partitioning the document into relevant segments and understanding the context of each segment. In discourse analysis, the division of a discourse into various segments is achieved through certain indicative clauses called cue phrases that indicate changes in the discourse context. However, in formal documents such language may not be used. Hence the use of a domain specific ontology and an assembly process model is proposed to segregate chunks of the text based on a local context. Elements of the ontology/model, and their related terms serve as indicators of current context for a segment and changes in context between segments. Local contexts are aggregated for increasingly larger segments to identify if the document (or portions of it) pertains to the topic of interest, namely, assembly. Knowledge acquired through such processes enables acquisition and reuse of knowledge during any part of the lifecycle of a product.

The 2014 M-w 6.1 Bay of Bengal, Indian Ocean, Earthquake: A Possible Association with the 85 degrees E Ridge

Oceanic intraplate earthquakes are known to occur either on active ridge-transform structures or by reactivation of their inactive counterparts, generally referred to as fossil ridges or transforms. The Indian Ocean, one of the most active oceanic intraplate regions, has generated large earthquakes associated with both these types of structures. The moderate earthquake that occurred on 21 May 2014 (M-w 6.1) in the northern Bay of Bengal followed an alternate mechanism, as it showed no clear association either with active or extinct ridge-transform structures. Its focal depth of >50 km is uncommon but not improbable, given the similar to 90 Ma age of the ocean floor with 12-km-thick overlying sediments. No tectonic features have been mapped in the near vicinity of its epicenter, the closest being the 85 degrees E ridge, located similar to 100 km to its west, hitherto regarded as seismically inactive. The few earthquakes that have occurred here in the past are clustered around its southern or northern limits, and a few are located midway, at around 10 degrees N. The 2014 earthquake, sourced close to the northern cluster, seems to be associated with a northwest-southeast-oriented fracture, located on the eastern flanks of the 85 degrees E ridge. If this causal association is possible, we believe that reactivation of fossil hotspot trails could be considered as another mechanism for oceanic intraplate seismicity.

Inclusión de desperdicios de cocina y galletas en la alimentación de cerdos de engorde

El presente estudio se realizó en la Granja Porcina de la Universidad Nacional Agraria (UNA), ubicada en el kilómetro 13, Carretera Norte, desvió a Sabana Grande, Managua, Nicaragua La realización del ensayó duró 12 semanas comprendidas entre los meses de septiembre-y diciembre de 1998 El objetivo del mismo fue evaluar el comportamiento productivo de cerdos en crecimiento, desarrollo y engorde al utilizar diferentes raciones: concentrado (T1) desperdicios de cocina (T2) y desperdicios de cocina más desperdicios de galleta (T3) Se utilizaron 24 cerdos- híbridos formándose grupos de 8 cerdos por tratamiento, (4 hembras y 4 machos) Los cerdos se pesaron al inicio y luego cada 28 días hasta el final del experimentó, Con las ganancias de peso y conversión alimenticia de los diferentes lotes de cerdos, se efectuó el análisis estadístico correspondiente al diseño experimental completamente al azar (DCA). Los cerdos que presentaron una ganancia de peso más alta, fueron los que se alimentaron con la ración formulada con fuente comercial (tratamiento l) dando una ganancia de peso promedio de 0.693 kg; Los cerdos alimentados con l00% de desperdicios de cocina alcanzaron una ganancia de peso promedio de 0.540 kg, mientras que los del tratamiento 3 alimentados con 50.% con desperdicios de cocina más 50% de desperdicios de galleta alcanzaron una ganancia media de peso promedio de 0,629 kg. El análisis de la ganancia media diaria mostró que hubo diferencia significativa con un alfa de 0.05% entre el tratamiento l y tratamiento 2 y entre los tratamientos 2 y 3, no mostrando diferencia entre los tratamientos 1 y 3, obteniendo el tratamiento 1 la rmejor ganancia media diaria. La conversión de los alimentados bajo el tratamiento de concentrado comercial, fue la más eficiente con un valor de 3.804 Los cerdos bajo el tratamiento 2 presentaron una conversión de 9.691 y el lote de cerdos en el tratamiento 3 presentó una conversión de 7.417. El análisis estadístico mostró que las diferencias en conversión alimenticia son altamente significativas entre el tratamiento l y tratamiento 2 y el tratamiento 1 y el tratamiento 3 y no significativas entre el tratamiento 2 y 3, obteniendo mejor resultado el tratamiento I (concentrado) a un alfa de 0.05%. En la estimación de los costos de los alimentos, el tratamiento 2 produjo los mayores beneficios económicos; debido al bajo costo del alimento con un valor de C$ 9, 856.

Estudio de cinco leguminosas en la fertilización y métodos de manejo de malezas en el cultivo de la Pitahaya (Hylocereus undatus Britt y Rose)

En el mes de junio de 1996, se estableció un experimento de campo en la empresa Frutas Tropicales Ltda, localizada en la comarca de Guanacastillo, departamento de Masaya, con el propósito de evaluar la influencia de cinco leguminosas de cobertura asociadas con el cultivo de la pitahaya (Hylocereus undatus Britt & Rose), como manejo de las malas hierbas y aporte de nutrientes a partir de la materia orgánica incorporada. Al estudio se le aplicó el diseño de bloques completos al azar con cuatro repeticiones.Los tratamientos evaluados fueron: Vigna radiata (L.) Wilczek, Mucuna pruriens (L.) DC., Vigna unguiculata (L.) Walp., Canavalia ensiformis (L.) DC., Lablab purpureus (L.) Sweet y el tratamiento Testigo, el cual representa el manejo tradicional en el control de las malezas de parte del productor. Los resultados indican que el mayor peso seco acumulado lo presentó C. ensiformis al registrar 7 401 kg/ha. En tanto, V. radiata con 2 331.66 kg/ha presentó el menor valor de peso seco. En el comportamiento del peso seco de las malezas se registró mas alto en M. pruriens con 1 600 kg/ha. En tanto, L. purpureus con 545 kg/ha fue el más bajo.Para medir el aporte de nutrientes a partir de la materia orgánica se hizo un análisis de suelo previo a la siembra de las leguminosas. Un segundo y tercer análisis de suelo se efectuaron 3 meses y 11 meses después de realizado el primer análisis. En nitrógeno el mejor resultado se obtuvo en V. unguiculata al ubicarse como mejor aportador en el primer análisis con 149.60 kg/ha y segundo mejor aportador en el segundo análisis con 113.28 kg/ha.Superado levemente en este caso por el tratamiento testigo con 113.40 kg/ha. En ambos análisis el menor aportador de nitrógeno fue C. ensiformis con 122.40 kg/ha y 103.32 kg/ha para el primer y segundo análisis respectivamente.En cuanto a fósforo, V. radiata se ubicó como mejor aportador en el primer análisis con 16.80 kg/ha, mientras que en el segundo análisis se ubicó como tercero con 26.49 kg/ha, superado por C. ensiformis y V. unguiculata con 40.66 kg/ha y 31.32 kg/ha respectivamente. En cambio M. pruriens se ubicó como el aportador más bajo de fósforo con 6.60 kg/ha en el primer análisis y 3.98 kg/ha en el segundo.En relación al potasio, el mejor resultado se obtuvo en M. pruriens con 567.73 kg/ha y 694.42 hg/ha en el primer y segundo muestreo respectivamente. Mientras que L. purpureus fue el menor aportador con 384.74 kg/ha y 273.70 kg/ha en el primer y segundo muestreo respectivamente.Con respecto a la influencia sobre la dinámica de las malezas el mejor resultado se presentó en M. pruriens, al eliminar por completo la presencia de malezas a los 95 días de establecido el ensayo. Similar comportamiento tuvo C. ensiformis con la diferencia que fue en un período más prolongado. Mayor abundancia de malezas presentaron los tratamiento L. purpureus, V. radiata y V. unguiculata, en los cuales hubo necesidad de acompañarlos con controles mecánicos. Por último, se ubicó el tratamiento Testigo el cual siempre necesito de control mecánico. En relación al mayor número de brotes por planta, los tratamientos implementados no tuvieron diferencias significativas entre ellos, pero en términos numéricos los que presentaron mayor número de brotes fueron V. radiata y Testigo con 4,856 y 4,417 respectivamente, seguidos de V. unguiculata y C. ensiformis con 3,933 y 3,922 respectivamente. Por último se ubicaron M. pruriens y L. purpureus con 3,267 y 3,034 respetivamente.De acuerdo a los resultados obtenidos en cobertura de suelo, diversidad y abundancia de malezas, biomasa y aporte de nutrientes a partir de residuos vegetales, excepto en fósforo, se recomienda el uso de la leguminosa Mucuna pruriens (L.) DC. En asocio con el cultivo de la pitahaya.

Comparative study of the slurry erosion and free-fall particle erosion of aluminum

A study has been performed of the erosion of aluminium by silica sand particles at a velocity of 4.5 m s-1, both air-borne and in the form of a water-borne slurry. Measurements made under similar experimental conditions show that slurry erosion proceeds at a rate several times that of air-borne erosion, the ratio of the two rates depending strongly on the angle of impact. Sand particles become embedded into the metal surface during air-borne particle erosion, forming a composite layer of metal and silica, and provide the major cause of the difference in wear rate. The embedded particles giving rise to surface hardening and a significant reduction in the erosion rate. Embedment of erodent particles was not observed during slurry erosion. Lubrication of the impacting interfaces by water appears to have minimal effect on the wear of aluminium by slurry erosion.

Tolman Effect On Fluid Dynamics In Carbon Nanotubes

The numerical solutions of or(R) given by two different methods (Samsonov et al., 2003; and Lu et al., 2005) are compared with the result that they are coincident closely (the difference is within 4%). We conclude that it is necessary to consider the Tolman correction in the calculation of fluid dynamics in carbon nanotubes. Although our conclusion is the same as that of Prylutskyy et al. (2005), the sign of our Tolman correction is opposite to theirs, and the difference can be attributed to the errors appeared in the paper of Prylutskyy et al.