Unit, direct support, and general support maintenance repair parts and special tools lists : drier-mixer, bituminous, concrete material, wheel mounted, GED, 2-wheel, pneumatic tires, 3 to 10 tons per hour (NSN 3895-00-832-6230).

"June 1992."

Ban yue 半月 (The Half Moon Journal) Vol 3 No 10

A bimonthly literary magazine edited by Zhou Shoujuan 周瘦鵑, featuring fiction, topical articles, and entertainment features, published from September 1921 through November 1925.

Ban yue 半月 (The Half Moon Journal) Vol 3 No 10

A bimonthly literary magazine edited by Zhou Shoujuan 周瘦鵑, featuring fiction, topical articles, and entertainment features, published from September 1921 through November 1925.

Unusual 1,6-diphenyl-1,3,5-hexatriene (DPH) spectrophotometric behavior in water/ethanol and water/DMSO mixtures

The absorption spectra of DPH at fixed concentration do not change with water content in organic solvents. It exhibits monomer bands, such as those obtained in ethanol. The absorption did not change for solutions up to 54 and 46% of water in ethanol and DMSO, respectively, for [DPH] = 5.0 × 10-6 mol L-1 at 30 °C. However, at the same experimental conditions, a gradual sharp decay of the DPH fluorescence is observed. It is proposed that water molecules below these water concentration limits act as quenchers of the excited states of DPH. Stern-Volmer quenching constants by intensities measurements are 7.4 × 10-2 (water/ethanol) and 2.6 × 10-2 L mol-1 (water/DMSO). DPH lifetime measurements in the absence and presence of water resulted in 7.1 × 10-2 L mol-1 in water/ethanol, which pointed out that the process is a dynamic quenching by water molecules. For experiments using DPH as probe, this process can affect data, leading to misunderstanding interpretation.

Derivatives of 1,3,5-triamino-1,3,5-trideoxy-cis-inositas versatile pentadentate ligands for protein labeling with Re-186/188. Prelabeling, biodistribution, and X-ray structural studies

The pentadentate H(3)bhci [1,3,5-trideoxy-1,3-bis((2-hydroxybenzyl)amino)-cis-inistol] and its bifunctionalized analogue H(3)bhci-glu-H [1,3,5-trideoxy-1,3-bis((2-hydroxybenzyl)amino)-5-glutaramido-cis-inositol] were synthesized, and their coordination chemistry was investigated with inactive rhenium, with no carrier added Re-188 and with carrier added Re-186. The neutral Re(V) complexes [ReO-(bhci)] and [ReO(bhci-glu-H)] are formed in good yields starting from [ReOCl3(P(C6H5)(3))(2)] or in quantitative yield directly from [(ReO4)-Re-186/188](-) in aqueous solution by reduction with Sn(II) or Sn(0). The X-ray structures of [ReO(bhci)] and [ReO(bhci-glu-H)] were elucidated revealing pentadentate side on coordination of the ligands to the Re=O core. The basic cyclohexane frame adopts a chair form in the case of [ReO(bhci)] and a twisted boat form in the case of [ReO(bhci-glu-H)]. [ReO(bhci)] crystallizes in the monoclinic space group C2/c with a = 27.425(3), b = 14.185(1), c = 19.047(2) Angstrom, and beta = 103.64(2)degrees and [ReO(bhci-glu-H)] in the monoclinic space group P2(1)/c with a = 13.056(3), b = 10.180(1), c = 22.378(5) Angstrom and beta = 98.205(9)degrees Both Re-188 complexes are stable in human serum for at least 3 days without decomposition. After injection into mice, [ReO(bhci-glu)](-) is readily excreted through the intestines, while [ReO(bhci)] is excreted by intestines, liver, and the kidneys. TLC investigations of the urine showed exclusively the complexes [ReO(bhci-glu-H)] and [ReO(bhci)], respectively, and no decomposition products. For derivatization of antibodies, the carboxylic group of [ReO(bhci-glu-H)] was activated with N-hydroxysuccinimide, which required unusually vigorous reaction conditions (heating). The anti colon cancer antibody mAb-35 [IgG and F(ab')(2) fragment] was labeled with [(ReO)-Re-186/188(bhci-glu)] to a specific activity of up to 1.5 mCi/mg (55 MBq/mg) with full retention of immunoreactivity. Labeling yields followed pseudo-first-order kinetics in antibody concentration with the ratio of rates between aminolysis and hydrolysis being about 2. Biodistributions of Re-186-labeled intact mAb-35 as well as of its F(ab')(2) fragment in tumor-bearing nude mice revealed good uptake by the tumor with only low accumulation of radioactivity in normal tissue.

Quality Assessment of Cardiac Magnetic Resonance Images at 1.5/3.0 T: Description and Validation of Standardized Criteria

PURPOSE: Cardiovascular magnetic resonance (CMR) has become a robust and important diagnostic imaging modality in cardiovascular medicine. However,insufficient image quality may compromise its diagnostic accuracy. No standardized criteria are available to assess the quality of CMR studies. We aimed todescribe and validate standardized criteria to evaluate the quality of CMR studies including: a) cine steady-state free precession, b) delayed gadoliniumenhancement, and c) adenosine stress first-pass perfusion. These criteria will serve for the assessment of the image quality in the setting of the Euro-CMR registry.METHOD AND MATERIALS: First, a total of 45 quality criteria were defined (35 qualitative criteria with a score from 0-3, and 10 quantitative criteria). Thequalitative score ranged from 0 to 105. The lower the qualitative score, the better the quality. The quantitative criteria were based on the absolute signal intensity (delayed enhancement) and on the signal increase (perfusion) of the anterior/posterior left ventricular wall after gadolinium injection. These criteria were then applied in 30 patients scanned with a 1.5T system and in 15 patients scanned with a 3.0T system. The examinations were jointly interpreted by 3 CMR experts and 1 study nurse. In these 45 patients the correlation between the results of the quality assessment obtained by the different readers was calculated.RESULTS: On the 1.5T machine, the mean quality score was 3.5. The mean difference between each pair of observers was 0.2 (5.7%) with a mean standarddeviation of 1.4. On the 3.0T machine, the mean quality score was 4.4. The mean difference between each pair of onservers was 0.3 (6.4%) with a meanstandard deviation of 1.6. The quantitative quality assessments between observers were well correlated for the 1.5T machine: R was between 0.78 and 0.99 (pCONCLUSION: The described criteria for the assessment of CMR image quality are robust and have a low inter-observer variability, especially on 1.5T systems.CLINICAL RELEVANCE/APPLICATION: These criteria will allow the standardization of CMR examinations. They will help to improve the overall quality ofexaminations and the comparison between clinical studies.

Efeito do grau de moagem, do tipo de frasco e do volume vazio sobre a variabilidade analítica do fósforo extraído pelos métodos Mehlich-1 e Mehlich-3

Na execução de uma análise química de solo são empregados diversos procedimentos que, mesmo seguindo-se o protocolo preconizado pelo método de análise utilizado, estão sujeitos a variações nos resultados analíticos, causadas por manipulação das amostras ou dos materiais utilizados. Objetivou-se neste estudo avaliar a influência do grau de moagem da amostra, do tipo de frasco e do volume vazio no frasco na execução dos métodos Mehlich-1 e Mehlich-3 para determinar o P no solo. Para tanto, foram conduzidos três experimentos. No primeiro experimento, as amostras de solo foram moídas e tamisadas em peneiras com aberturas de 2,000; 1,700; 0,850; 0,600; e 0,300 mm. No segundo, foram utilizados dois modelos de frasco (erlenmeyer e snap-cap), ambos com volume de 50 mL. Já no terceiro, foi alterado o volume vazio no frasco, mantendo-se a relação solo:solução extratora utilizando-se as quantidades dentro do frasco de 1:10; 1,5:15; 2,5:25; 3:30; e 4:40 cm³ cm-3. O grau de moagem das amostras não influenciou a capacidade de extração do Mehlich-1; entretanto, a capacidade extrativa do Mehlich-3 foi influenciada, principalmente em solos argilosos. Tanto para o Mehlich-1 quanto para o Mehlich-3, os teores de P extraído foram significativamente mais elevados com o uso de frasco tipo snap-cap em relação ao erlenmeyer. O volume vazio no frasco alterou os teores de P extraído para o Mehlich-1 e Mehlich-3 em 100 e 64 % das amostras, respectivamente. Deve-se padronizar a intensidade da moagem das amostras de solo para extração do P pela solução de Mehlich-3. Um modelo único de frasco deve ser adotado pelos laboratórios de rotina para análise do P, independentemente do método de extração, mantendo-se sempre constante no frasco o volume da amostra (cm³) para o volume de solução extratora (cm³).

Fotoquímica e fotofísica do ácido 1,4-bis(3-carbóxi-3-oxo-prop-1-enil)benzeno

Este trabalho versa sobre a caracterização espectroscópica do ácido 1,4-bis(3-carbóxi-3-oxo-prop-1-enil)benzeno, substância com potencialidade em complexação de íons metálicos. Para isto foram obtidos espectros de UV/VIS do composto em meio aquoso na presença e ausência de irradiação no ultra-violeta. Foram obtidos um coeficiente de extinção molar de 36.457 L mol-1 cm-1 e uma taxa de degradação de 5,2.10-7 mol L-1 min-1, quando se irradiou uma solução do composto cuja concentração era de 3,2.10-5 mol L-1 em uma cubeta de quartzo de 10mm de caminho ótico a 7,0cm de uma lâmpada de mercúrio de 80W.

Influence of the synthesis conditions on the characteristics and metal adsorption properties of the 3-(1,4-phenylenediamine)propylsilica xerogel

The hybrid 3-(1,4-phenylenediamine)propylsilica xerogel was obtained starting from two different organic precursor quantity (5 and 8 mmol) to 22 mmol of TEOS, in the synthesis. The xerogel samples were characterized by using CHN elemental analysis, N2 adsorption-desorption isotherms, infrared thermal analysis. The xerogel was used as metal sorbent for Cu2+, Cd2+ and Pb2+ in aqueous solution with concentration range of 10-3 to 10-5 mmol l-1. The quantity of organic precursor added in the synthesis influences the characteristics of the xerogel as morphology and thermal stability, as well as the metal adsorption capacity.

Gas-phase reactions of NO3 and N2O5 with (Z)-hex-4-en-1-ol, (Z)-hex-3-en-1-ol ('leaf alcohol'), (E)-hex-3-en-1-ol, (Z)-hex-2-en-1-ol and (E)-hex-2-en-1-ol

The night-time atmospheric chemistry of the biogenic volatile organic compounds (Z)-hex-4-en-1-ol, (Z)-hex-3-en-1-ol ('leaf alcohol'), (E)-hex-3-en-1-ol, (Z)-hex-2-en-1-ol and (E)-hex-2-en-1-ol, has been studied at room temperature. Rate coefficients for reactions of the nitrate radical (NO3) with these stress-induced plant emissions were measured using the discharge-flow technique. We employed off-axis continuous-wave cavity-enhanced absorption spectroscopy (CEAS) for the detection of NO3, which enabled us to work in excess of the hexenol compounds over NO3. The rate coefficients determined were (2.93 +/- 0.58) x 10(-13) cm(3) molecule(-1) s(-1), (2.67 +/- 0.42) x 10(-13) cm(3) molecule(-1) s(-1), (4.43 +/- 0.91) x 10(-13) cm(3) molecule(-1) s(-1), (1.56 +/- 0.24) x 10(-13) cm(3) molecule(-1) s(-1), and (1.30 +/- 0.24) x 10(-13) cm(3) molecule(-1) s(-1) for (Z)-hex-4-en-1-ol, (Z)-hex-3en-1-ol, (E)-hex-3-en-1-ol, (Z)-hex-2-en-1-ol and (E)-hex-2-en-1-ol. The rate coefficient for the reaction of NO3 with (Z)-hex-3-en-1-ol agrees with the single published determination of the rate coefficient using a relative method. The other rate coefficients have not been measured before and are compared to estimated values. Relative-rate studies were also performed, but required modification of the standard technique because N2O5 (used as the source of NO3) itself reacts with the hexenols. We used varying excesses of NO2 to determine simultaneously rate coefficients for reactions of NO3 and N2O5 with (E)-hex-3-en-1-ol of (5.2 +/- 1.8) x 10(-13) cm(3) molecule(-1) s(-1) and (3.1 +/- 2.3) x 10(-18) cm(3) molecule(-1) s(-1). Our new determinations suggest atmospheric lifetimes with respect to NO3-initiated oxidation of roughly 1-4 h for the hexenols, comparable with lifetimes estimated for the atmospheric degradation by OH and shorter lifetimes than for attack by O-3. Recent measurements of [N2O5] suggest that the gas-phase reactions of N2O5 with unsaturated alcohols will not be of importance under usual atmospheric conditions, but they certainly can be in laboratory systems when determining rate coefficients.

7,7-dimetoxi-1,4,5,6-tetraclorobiciclo[2.2.1]heptan-5-en-2-endo-ol : um versátil reagente na síntese de 1,3-aminoálcoois e de ciclopentanóides quirais altamente funcionalizados

Este trabalho relata a síntese de uma série de novos ligantes quirais (+) e (-)-syn-1,3-aminoálcoois derivados do norbornano. Através da reação de transesterificação enzimática com a lípase da Candida rugosa em acetato de vinila do álcool racêmico 7,7-dimetoxi-1,4,5,6-tetraclorobiciclo[2.2.1]heptan-5-en-2-ol, (±)-3, foram obtidos os álcoois quirais (+)-3 e (-)-3 (Esquema 1). Através da reação de redução e descloração destes álcoois com Na0/NH3/etanol foram obtidos os respectivos álcoois (+)-4 e (-)-4 (Esquema 2). Os álcoois quirais (+)-4 e (-)-4 foram utilizados como produtos de partida para a síntese dos 1,3-aminoálcoois quirais (+)-9 e (-)-9 em 5 etapas. Deste modo, a partir destes aminoálcoois (9), foi possível sintetizar 12 novos compostos (Esquema 2), todos inétidos na literatura. Os 1,3-aminoálcoois 10, 11, 13, 14 e 15 foram empregados como catalisadores quirais na adição enantiosseletiva de ZnEt2 ao benzaldeído. Excelentes rendimentos e excessos enantioméricos (até 91%) foram obtidos. A relação entre a configuração absoluta do 1-fenilpropanol com a configuração do carbono ligado ao grupo hidroxila dos ligantes foi estudada e, de acordo, com a enantiosseletividade observada foi sugerido um mecanismo para a reação Os produtos com esqueleto ciclopentila são importantes compostos com potencial atividade biológica, fazendo parte da estrutura de prostaglandinas, agentes antitumorais e inibidores da glicosidase. Portanto, nós decidimos usar o acetato clorado quiral 2 para preparar ciclopentanóides quirais altamente funcionalizados. Para isso, o acetato clorado quiral 2 foi submetido à oxidação usando uma quantidade catalítica de RuCl3 anidro na presença de NaIO4 obtendo-se a dicetona 16 (Esquema 3). A dicetona 16 foi clivada com H2O2 em meio alcalino fornecendo os diácidos 17a e 17b, que foram esterificados in situ com excesso de CH2N2 para fornecer uma mistura do hidroxi e acetoxi diéster 18 e 19, respectivamente. A redução da mistura 18 e 19 ou da mistura 17a e 17b com BH3.THF fornece a lactona 20 com excelentes rendimentos.