Nutrition and Nutritional Care of Elderly People in Finnish Nursing Homes and Hospitals

Background: Malnutrition is a common problem for residents of nursing homes and long-term care hospitals. It has a negative influence on elderly residents and patients health and quality of life. Nutritional care seems to have a positive effect on elderly individuals nutritional status and well-being. Studies of Finnish elderly people s nutrition and nutritional care in institutions are scarce. Objectives: The primary aim was to investigate the nutritional status and its associated factors of elderly nursing home residents and long-term care patients in Finland. In particular, to find out, if the nursing or nutritional care factors are associated with the nutritional status, and how do carers and nurses recognize malnutrition. A further aim was to assess the energy and nutrient intake of the residents of dementia wards. A final objective was to find out, if the nutrition training of professionals leads to changes in their knowledge and further translate into better nutrition for the aged residents of dementia wards. Subjects and methods: The residents (n=2114) and patients (n=1043) nutritional status was assessed in all studies using the Mini Nutritional Assessment test (MNA). Information was gathered in a questionnaire on residents and patients daily routines providing nutritional care. Residents energy and nutrient intake (n=23; n=21) in dementia wards were determined over three days by the precise weighing method. Constructive learning theory was the basis for educating the professionals (n=28). A half-structured questionnaire was used to assess professionals learning. Studies I-IV were cross-sectional studies whereas study V was an intervention study. Results: Malnutrition was common among elderly residents and patients living in nursing homes and hospitals in Finland. According to the MNA, 11% to 57% of the studied elderly people suffered from malnutrition, and 40-89% were at risk of malnutrition, whereas only 0-16% had a good nutritional status. Resident- and patient-related factors such as dementia, impaired ADL (Activities of Daily Living), swallowing difficulties and constipation mainly explained the malnutrition, but also some nutritional care related factors, such as eating less than half of the offered food portion and not receiving snacks were also related to malnutrition. The intake of energy and some nutrients by the residents of dementia wards were lower than those recommended, although the offered food contained enough energy and nutrients. The proportion of residents receiving vitamin D supplementation was low, although there is a recommendation and known benefits for the adequate intake of vitamin D. Nurses recognized malnutrition poorly, only one in four (26.7%) of the actual cases. Keeping and analysing food diaries and reflecting on nutritional issues in small group discussions were effective training methods for professionals. The nutrition education of professionals had a positive impact on the energy and protein intake, BMIs, and the MNA scores of some residents in dementia wards. Conclusions: Malnutrition was common among elderly residents and patients living in nursing homes and hospitals in Finland. Although residents- and patient related factors mainly explained malnutrition, nurses recognized malnutrition poorly and nutritional care possibilities were in minor use. Professionals nutrition education had a positive impact on the nutrition of elderly residents. Further studies describing successful nutritional care and nutrition education of professionals are needed.

Foodborne Yersinia : Identification and Molecular Epidemiology of Isolates from Human Infections

Yersinia enterocolitica and Yersinia pseudotuberculosis are among the major enteropathogenic bacteria causing infections in humans in many industrialized countries. In Finland, Y. pseudotuberculosis has caused 10 outbreaks among humans during 1997-2008. Some of these outbreaks have been very extensive involving over 400 cases; mainly children attending schools and day-care. Y. enterocolitica, on the contrary, has caused mainly a large number of sporadic human infections in Finland. Y. pseudotuberculosis is widespread in nature, causing infections in a variety of domestic and wild animals. Foodborne transmission of human infections has long been suspected, however, attempts to trace the pathogen have been unsuccessful before this study that epidemiologically linked Y. pseudotuberculosis to a specific food item. Furthermore, due to modern food distribution systems, foodborne outbreaks usually involve many geographically separate infection clusters difficult to identify as part of the same outbreak. Among pathogenic Y. enterocolitica, the global predominance of one genetically homogeneous type (bioserotype 4/O:3) is a challenge to the development of genetic typing methods discriminatory enough for epidemiological purposes, for example, for tracing back to the sources of infections. Furthermore, the diagnostics of Y. enterocolitica infections is hampered because clinical laboratories easily misidentify some other members of the Yersinia species (Y. enterocolitica–like species) as Y. enterocolitica. This results in misleading information on the prevalence and clinical significance of various Yersinia isolates. The aim of this study was to develop and optimize molecular typing methods to be used in epidemiological investigations of Y. enterocolitica and Y. pseudotuberculosis, particularly in active surveillance and outbreak investigations of Y. pseudotuberculosis isolates. The aim was also to develop a simplified set of phenotypic tests that could be used in routine diagnostic laboratories for the correct identification of Y. enterocolitica and Y. enterocolitica –like species. A PFGE method designed here for typing of Y. pseudotuberculosis was efficient in linking the geographically dispersed and apparently unrelated Y. pseudotuberculosis infections as parts of the same outbreak. It proved to be useful in active laboratory-based surveillance of Y. pseudotuberculosis outbreaks. Throughout the study period, information about the diversity of genotypes among outbreak and non-outbreak related strains of human origin was obtained. Also, to our knowledge, this was the first study to epidemiologically link a Y. pseudotuberculosis outbreak of human illnesses to a specific food item, iceberg lettuce. A novel epidemiological typing method based on the use of a repeated genomic region (YeO:3RS) as a probe was developed for the detection and differentiation between strains of Y. enterocolitica subspecies palearctica. This method was able to increase the discrimination in a set of 106 previously PFGE typed Finnish Y. enterocolitica bioserotype 4/O:3 strains among which two main PFGE genotypes had prevailed. The developed simplified method was a more reliable tool than the commercially available biochemical test kits for differentiation between Y. enterocolitica and Y. enterocolitica –like species. In Finland, the methods developed for Y. enterocolitica and Y. pseudotuberculosis have been used to improve the identification protocols and in subsequent outbreak investigations.

Monitoring of Fungal Growth and Degradation of Wood

Valko- ja ruskolahosienet tunnetaan luonnossa tehokkaimpina puun ja karikkeen lignoselluloosan lahottajina. Valkolahosienet pystyvät hajottamaan kaikkia puun osia: ligniiniä, selluloosaa ja hemiselluloosaa. Selektiivisesti ligniiniä hajottavat sienet lahottavat puusta suhteessa enemmän vaikeasti hajoavaa ligniiniä kuin selluloosaa tai hemiselluloosaa, jolloin jäljelle jää valkoista ja miltei puhdasta selluloosaa. Bioteknisissä sovelluksissa juuri selektiviiviset valkolahottajat ovat kiinnostavia. Niiden avulla voidaan puuhaketta esikäsitellä esimerkiksi paperinvalmistuksessa haitallisen ligniinin poistamiseksi. Ruskolahosienet ovat huomattavia puun, puutavaran ja puisten rakenteiden lahottajia, kuten tässä työssä käytetty Gloeophyllum trabeum (saunasieni ) ja Poria (Postia) placenta (istukkakääpä). Ruskolahosienet hajottavat puusta hemiselluloosan lisäksi selluloosaa, jolloin jää jäljelle ruskea ja jauhomaiseksi mureneva ligniini. Ruskolahosienet muovaavat ligniiniä jonkin verran. Kahden ruskolahosienen G. trabeumin ja P. placentan lisäksi tutkittiin valkolahosieniä, joista Ceriporiopsis subvermispora (karstakääpä) ja harvinainen Physisporinus rivulosus -sieni (talikääpä) hajottavat ligniiniä erittäin selektiivisesti. Phanerochaete chrysosporium on kaikkialla paljon tutkittu sieni, ja Phlebia radiata valkolahosientä (rusorypykkä) on tutkittu paljon mikrobiologian osastolla. Lisäksi tutkittiin Phlebia tremellosa -sienten (hytyrypykkä) ligninolyyttisten entsyymien tuottoa ja 14C-leimatun synteettisen ligniinin (DHP) hajotusta. P. radiata ja P. tremellosa -sienten on todettu aiemmin hajottavan ligniiniä selektiivisesti. Työssä selvitettiin miten sienten kasvua voi mitata, miten vertailukelpoisia eri mittaamismenetelmillä saadut tulokset ovat ja ilmenevätkö sienten aktiivisimmat kasvuvaiheet samaan aikaan eri menetelmillä mitattuna. Tärkeimmät tulokset olivat seuraavat havainnot: (i) P. radiata ja P. tremellosa -sienikannat tuottivat ligniini- ja mangaaniperoksidaasientsyymejä (LiP ja MnP) sekä lakkaasia, ja sienistä puhdistettiin 2-3 LiP- ja P. radiatasta yksi MnP-entsyymi; (ii) P. tremellosa -sienet hajottivat leimattua synteettistä ligniiniä (DHP) yhtä hyvin kuin paljon tutkitut P. chrysosporium ja P. radiata -sienet; (iii) puu, sienen luonnollinen kasvualusta, lisäsi valkolaho- ja ruskolahosienten demetoksylaatiota [O14CH3]-leimatusta ligniinin malliyhdisteestä 14CO2:ksi ilman puuta olleeseen alustaan verrattuna; (iv) demetoksylaatio (14CO2:n tuotto) oli normaalissa ilma-atmosfäärissä useimmiten parempi happeen verrattuna; (v) hapessa paras 14CO2:n tuotto saatiin puupalakasvatuksissa, joihin oli lisätty ravinnetyppeä tai typen lisäksi glukoosia sekä valkolaho- että ruskolahosienillä; (vi) ilmassa 14CO2:n tuotto oli puulla voimakkainta valkolahosienillä ilman lisäravinteita, kun taas G. trabeum -sienellä se oli yhtä hyvä eri alustoissa; (vii) biomassan muodostuminen rihmastojen ergosterolipitoisuuksista mitattuna oli ruskolahosienillä parempi kuin valkolahosienillä; (viii) ja biomassojen huippupitoisuudet olivat 6:lla sienellä eri suuruisia ja niiden maksimimäärien ajankohdat vaihtelivat viiden viikon kasvatusten kuluessa. Mikrobiologian osastolla Viikissä eristetty ja paljon tutkittu P. radiata -valkolahosieni oli mukana kaikissa tehdyissä kokeissa. Sienen LiP-aktiivisuus ja 14CO2:n tuotto 14C-rengas-leimatusta synteettisestä ligniinistä (DHP) korreloivat erittäin hyvin. Biomassan muodostuminen ergosterolilla määritettynä tuki hyvin entsyymiaktiivisuusmittauksilla ja isotooppikasvatuksilla saatuja tuloksia.

Bacillus cereus spores and cereulide in food-borne illness

B. cereus is a gram-positive bacterium that possesses two different forms of life:the large, rod-shaped cells (ca. 0.002 mm by 0.004 mm) that are able to propagate and the small (0.001 mm), oval shaped spores. The spores can survive in almost any environment for up to centuries without nourishment or water. They are insensitive towards most agents that normally kill bacteria: heating up to several hours at 90 ºC, radiation, disinfectants and extreme alkaline (≥ pH 13) and acid (≤ pH 1) environment. The spores are highly hydrophobic and therefore make them tend to stick to all kinds of surfaces, steel, plastics and live cells. In favorable conditions the spores of B. cereus may germinate into vegetative cells capable of producing food poisoning toxins. The toxins can be heat-labile protein formed after ingestion of the contaminated food, inside the gastrointestinal tract (diarrhoeal toxins), or heat stable peptides formed in the food (emesis causing toxin, cereulide). Cereulide cannot be inactivated in foods by cooking or any other procedure applicable on food. Cereulide in consumed food causes serious illness in human, even fatalities. In this thesis, B. cereus strains originating from different kinds of foods and environments and 8 different countries were inspected for their capability of forming cereulide. Of the 1041 isolates from soil, animal feed, water, air, used bedding, grass, dung and equipment only 1.2 % were capable of producing cereulide, whereas of the 144 isolates originating from foods 24 % were cereulide producers. Cereulide was detected by two methods: by its toxicity towards mammalian cells (sperm assay) and by its peculiar chemical structure using liquid-chromatograph-mass spectrometry equipment. B. cereus is known as one of the most frequent bacteria occurring in food. Most foods contain more than one kind of B. cereus. When randomly selected 100 isolates of B. cereus from commercial infant foods (dry formulas) were tested, 11% of these produced cereulide. Considering a frequent content of 103 to 104 cfu (colony forming units) of B. cereus per gram of infant food formula (dry), it appears likely that most servings (200 ml, 30 g of the powder reconstituted with water) may contain cereulide producers. When a reconstituted infant formula was inoculated with >105 cfu of cereulide producing B. cereus per ml and left at room temperature, cereulide accumulated to food poisoning levels (> 0.1 mg of cereulide per serving) within 24 hours. Paradoxically, the amount of cereulide (per g of food) increased 10 to 50 fold when the food was diluted 4 - 15 fold with water. The amount of the produced cereulide strongly depended on the composition of the formula: most toxin was formed in formulas with cereals mixed with milk, and least toxin in formulas based on milk only. In spite of the aggressive cleaning practices executed by the modern dairy industry, certain genotypes of B. cereus appear to colonise the silos tanks. In this thesis four strategies to explain their survival of their spores in dairy silos were identified. First, high survival (log 15 min kill ≤ 1.5) in the hot alkaline (pH >13) wash liquid, used at the dairies for cleaning-in-place. Second, efficient adherence of the spores to stainless steel from cold water. Third, a cereulide producing group with spores characterized by slow germination in rich medium and well preserved viability when exposed to heating at 90 ºC. Fourth, spores capable of germinating at 8 ºC and possessing the psychrotolerance gene, cspA. There were indications that spores highly resistant to hot 1% sodium hydroxide may be effectively inactivated by hot 0.9% nitric acid. Eight out of the 14 dairy silo tank isolates possessing hot alkali resistant spores were capable of germinating and forming biofilm in whole milk, not previously reported for B. cereus. In this thesis it was shown that cereulide producing B. cereus was capable of inhibiting the growth of cereulide non-producing B. cereus occurring in the same food. This phenomenon, called antagonism, has long been known to exist between B. cereus and other microbial species, e.g. various species of Bacillus, gram-negative bacteria and plant pathogenic fungi. In this thesis intra-species antagonism of B. cereus was shown for the first time. This brother-killing did not depend on the cereulide molecule, also some of the cereulide non-producers were potent antagonists. Interestingly, the antagonistic clades were most frequently found in isolates from food implicated with human illness. The antagonistic property was therefore proposed in this thesis as a novel virulence factor that increases the human morbidity of the species B. cereus, in particular of the cereulide producers.

Assessment and control of Bacillus cereus emetic toxin in food

Despite of improving levels of hygiene, the incidence of registered food borne disease has been at the same level for many years: there were 40 to 90 epidemics in which 1000-9000 persons contracted food poisoning through food or drinking water in Finland. Until the year 2004 salmonella and campylobacter were the most common bacterial causes of food borne diseases, but in years 2005-2006 Bacillus cereus was the most common. Similar developement has been published i.e. in Germany already in the 1990´s. One reason for this can be Bacillus cereus and its emetic toxin, cereulide. Bacillus cereus is a common environmental bacterium that contaminates raw materials of food. Otherwise than salmonella and campylobacter, Bacillus cereus is a heat resistant bacterium, capable of surviving most cooking procedures due to the production of highly thermo resistant spores. The food involved has usually been heat treated and surviving spores are the source of the food poisoning. The heat treatment induces germination of the spore and the vegetative cells then produce toxins. This doctoral thesis research focuses on developing methods for assessing and eliminating risks to food safety by cereulide producing Bacillus cereus. The biochemistry and physiology of cereulide production was investigated and the results were targeted to offer tools for minimizing toxin risk in food during the production. I developed methods for the extraction and quantitative analysis of cereulide directly from food. A prerequisite for that is knowledge of the chemical and physical properties of the toxin. Because cereulide is practically insoluble in water, I used organic solvents; methanol, ethanol and pentane for the extraction. For extraction of bakery products I used high temperature (100C) and pressure (103.4 bars). Alternaties for effective extraction is to flood the plain food with ethanol, followed by stationary equilibration at room temperature. I used this protocol for extracting cereulide from potato puree and penne. Using this extraction method it is also possible also extract cereulide from liquid food, like milk. These extraction methods are important improvement steps for studying of Bacillus cereus emetic food poisonings. Prior my work, cereulide extraction was done using water. As the result, the yield was poor and variable. To investigate suspected food poisonings, it is important to show actual toxicity of the incriminated food. Many toxins, but not cereulide, inactivate during food processing like heating. The next step is to identify toxin by chemical methods. I developed with my colleague Maria Andesson a rapid assay for the detection of cereulide toxicity, within 5 to 15 minutes. By applying this test it is possible to rapidly detect which food was causing the food poisoning. The chemical identification of cereulide was achieved using mass spectrometry. I used cereulide specific molecular ions, m/z (+/-0.3) 1153.8 (M+H+), 1171.0 (M+NH4+), 1176.0 (M+Na+) and 1191.7 (M+K+) for reliable identification. I investigated foods to find out their amenability to accumulate cereulide. Cereulide was formed high amounts (0.3 to 5.5 microg/g wet wt) when of cereulide producing B. cereus strains were present in beans, rice, rice-pastry and meat-pastry, if stored at non refrigerated temperatures (21-23C). Rice and meat pastries are frequently consumed under conditions where no cooled storage is available e.g. picnics and outdoor events. Bacillus cereus is a ubiquitous spore former and is therefore difficult to eliminate from foods. It is therefore important to know which conditions will affect the formation of cereulide in foods. My research showed that the cereulide content was strongly (10 to 1000 fold differences in toxin content) affected by the growth environment of the bacterium. Storage of foods under nitrogen atmosphere (> 99.5 %) prevented the production of cereulide. But when also carbon dioxide was present, minimizing the oxygen contant (< 1%) did not protect the food from formation of cereulide in preliminary experiments. Also food supplements affected cereulide production at least in the laboratory. Adding free amino acids, leucine and valine, stimulated cereulide production 10 to 20 fold. In peptide bonded form these amino acids are natural constituents in all proteins. Interestingly, adding peptide bonded leucine and valine had no significant effect on cereulide production. Free amino acids leucine and valine are approved food supplements and widely used as flawour modifiers in food technology. My research showed that these food supplements may increase food poisoning risk even though they are not toxic themselves.

The white-rot fungi Phlebia radiata and Dichomitus squalens in wood-based cultures: expression of laccases, lignin peroxidases, and oxalate decarboxylase

Basidiomycetous white-rot fungi are the only organisms that can efficiently decompose all the components of wood. Moreover, white-rot fungi possess the ability to mineralize recalcitrant lignin polymer with their extracellular, oxidative lignin-modifying enzymes (LMEs), i.e. laccase, lignin peroxidase (LiP), manganese peroxidase (MnP), and versatile peroxidase (VP). Within one white-rot fungal species LMEs are typically present as several isozymes encoded by multiple genes. This study focused on two effi cient lignin-degrading white-rot fungal species, Phlebia radiata and Dichomitus squalens. Molecular level knowledge of the LMEs of the Finnish isolate P. radiata FBCC43 (79, ATCC 64658) was complemented with cloning and characterization of a new laccase (Pr-lac2), two new LiP-encoding genes (Pr-lip1, Pr-lip4), and Pr-lip3 gene that has been previously described only at cDNAlevel. Also, two laccase-encoding genes (Ds-lac3, Ds-lac4) of D. squalens were cloned and characterized for the first time. Phylogenetic analysis revealed close evolutionary relationships between the P. radiata LiP isozymes. Distinct protein phylogeny for both P. radiata and D. squalens laccases suggested different physiological functions for the corresponding enzymes. Supplementation of P. radiata liquid culture medium with excess Cu2+ notably increased laccase activity and good fungal growth was achieved in complex medium rich with organic nitrogen. Wood is the natural substrate of lignin-degrading white-rot fungi, supporting production of enzymes and metabolites needed for fungal growth and the breakdown of lignocellulose. In this work, emphasis was on solid-state wood or wood-containing cultures that mimic the natural growth conditions of white-rot fungi. Transcript analyses showed that wood promoted expression of all the presently known LME-encoding genes of P. radiata and laccase-encoding genes of D. squalens. Expression of the studied individual LME-encoding genes of P. radiata and D. squalens was unequal in transcript quantities and apparently time-dependent, thus suggesting the importance of several distinct LMEs within one fungal species. In addition to LMEs, white-rot fungi secrete other compounds that are important in decomposition of wood and lignin. One of these compounds is oxalic acid, which is a common metabolite of wood-rotting fungi. Fungi produce also oxalic-acid degrading enzymes of which the most widespread is oxalate decarboxylase (ODC). However, the role of ODC in fungi is still ambiguous with propositions from regulation of intra and extracellular oxalic acid levels to a function in primary growth and concomitant production of ATP. In this study, intracellular ODC activity was detected in four white-rot fungal species, and D. squalens showed the highest ODC activity upon exposure to oxalic acid. Oxalic acid was the most common organic acid secreted by the ODC-positive white-rot fungi and the only organic acid detected in wood cultures. The ODC-encoding gene Ds-odc was cloned from two strains of D. squalens showing the first characterization of an odc-gene from a white-rot polypore species. Biochemical properties of the D. squalens ODC resembled those described for other basidiomycete ODCs. However, the translated amino acid sequence of Ds-odc has a novel N-terminal primary structure with a repetitive Ala-Ser-rich region of ca 60 amino acid residues in length. Expression of the Ds-odc transcripts suggested a constitutive metabolic role for the corresponding ODC enzyme. According to the results, it is proposed that ODC may have an essential implication for the growth and basic metabolism of wood-decaying fungi.

Poverty and the Environment : Investment Poverty and the Role of Assets in Generating Welfare for Farmer Households in the Province of Herrera, Panama

Köyhiä maanviljelijöitä on usein syytetty kehitysmaiden ympäristöongelmista. On väitetty, että eloonjäämistaistelu pakottaa heidät käyttämään maata ja muita luonnonvaroja lyhytnäköisesti. Harva asiaa koskeva tutkimus on kuitenkaan tukenut tätä väitettä; perheiden köyhyyden astetta ja heidän aiheuttamaansa ympäristövaikutusta ei ole kyetty kytkemään toisiinsa. Selkeyttääkseen köyhyys-ympäristö –keskustelua, Thomas Reardon ja Steven Vosti kehittivät investointiköyhyyden käsitteen. Se tunnistaa sen kenties suuren joukon maanviljelijäperheitä, jotka eivät ole köyhiä perinteisten köyhyysmittareiden mukaan, mutta joiden hyvinvointi ei ole riittävästi köyhyysrajojen yläpuolella salliakseen perheen investoida kestävämpään maankäyttöön. Reardon ja Vosti korostivat myös omaisuuden vaikutusta perheiden hyvinvointiin, ja uskoivat sen vaikuttavan tuotanto- ja investointipäätöksiin. Tässä tutkimuksessa pyritään vastaamaan kahteen kysymykseen: Miten investointiköyhyyttä voidaan ymmärtää ja mitata? Ja, mikä on viljelijäperheiden omaisuuden hyvinvointia lisäävä vaikutus? Tätä tutkimusta varten haastateltiin 402 maanviljelijäperhettä Väli-Amerikassa, Panaman tasavallan Herreran läänissä. Näiden perheiden hyvinvointia mitattiin heidän kulutuksensa mukaan, ja paikalliset köyhyysrajat laskettiin paikallisen ruoan hinnan mukaan. Herrerassa ihminen tarvitsee keskimäärin 494 dollaria vuodessa saadakseen riittävän ravinnon, tai 876 dollaria vuodessa voidakseen ravinnon lisäksi kattaa muitakin välttämättömiä menoja. Ruoka- eli äärimmäisen köyhyyden rajan alle jäi 15,4% tutkituista perheistä, ja 33,6% oli jokseenkin köyhiä, eli saavutti kyllä riittävän ravitsemuksen, muttei kyennyt kustantamaan muita perustarpeitaan. Molempien köyhyysrajojen yläpuolelle ylsi siis 51% tutkituista perheistä. Näiden köyhyysryhmien välillä on merkittäviä eroavaisuuksia ei vain perheiden varallisuuden, tulojen ja investointistrategioiden välillä, mutta myös perheiden rakenteessa, elinympäristössä ja mahdollisuuksissa saada palveluja. Investointiköyhyyden mittaaminen osoittautui haastavaksi. Herrerassa viljelijät eivät tee investointeja puhtaasti ympäristönsuojeluun, eikä maankäytön kestävyyttä muutenkaan pystytty yhdistämään perheiden hyvinvoinnin tasoon. Siksi investointiköyhyyttä etsittiin sellaisena hyvinvoinnin tasona, jonka alapuolella elävien perheiden parissa tuottavat maanparannusinvestoinnit eivät enää ole suorassa suhteessa hyvinvointiin. Tällaisia investointeja ovat mm. istutetut aidat, lannoitus ja paranneltujen laiduntyyppien viljely. Havaittiin, että jos perheen hyvinvointi putoaa alle 1000 dollarin/henkilö/vuosi, tällaiset tuottavat maanparannusinvestoinnit muuttuvat erittäin harvinaisiksi. Investointiköyhyyden raja on siis noin kaksi kertaa riittävän ravitsemuksen hinta, ja sen ylitti 42,3% tutkituista perheistä. Heille on tyypillistä, että molemmat puolisot käyvät työssä, ovat korkeasti koulutettuja ja yhteisössään aktiivisia, maatila tuottaa paremmin, tilalla kasvatetaan vaativampia kasveja, ja että he ovat kerryttäneet enemmän omaisuutta kuin investointi-köyhyyden rajan alla elävät perheet. Tässä tutkimuksessa kyseenalaistettiin yleinen oletus, että omaisuudesta olisi poikkeuksetta hyötyä viljelijäperheelle. Niinpä omaisuuden vaikutusta perheiden hyvinvointiin tutkittiin selvittämällä, mitä reittejä pitkin perheiden omistama maa, karja, koulutus ja työikäiset perheenjäsenet voisivat lisätä perheen hyvinvointia. Näiden hyvinvointi-mekanismien ajateltiin myös riippuvan monista väliin tulevista tekijöistä. Esimerkiksi koulutus voisi lisätä hyvinvointia, jos sen avulla saataisiin paremmin palkattuja töitä tai perustettaisiin yritys; mutta näihin mekanismeihin saattaa vaikuttaa vaikkapa etäisyys kaupungeista tai se, omistaako perhe ajoneuvon. Köyhimpien perheiden parissa nimenomaan koulutus olikin ainoa tutkittu omaisuuden muoto, joka edisti perheen hyvinvointia, kun taas maasta, karjasta tai työvoimasta ei ollut apua köyhyydestä nousemiseen. Varakkaampien perheiden parissa sen sijaan korkeampaa hyvinvointia tuottivat koulutuksen lisäksi myös maa ja työvoima, joskin monesta väliin tulevasta muuttujasta, kuten tuotantopanoksista riippuen. Ei siis ole automaatiota, jolla omaisuus parantaisi perheiden hyvinvointia. Vaikka rikkailla onkin yleensä enemmän karjaa kuin köyhemmillä, ei tässä aineistossa löydetty yhtään mekanismia, jota kautta karjan määrä tuottaisi korkeampaa hyvinvointia viljelijäperheille. Omaisuuden keräämisen ja hyödyntämisen strategiat myös muuttuvat hyvinvoinnin kasvaessa ja niihin vaikuttavat monet ulkoiset tekijät. Ympäristön ja köyhyyden suhde on siis edelleen epäselvä. Köyhyyden voittaminen vaatii pitkällä tähtäimellä sitä, että viljelijäperheet nousisivat investointiköyhyyden rajan yläpuolelle. Näin heillä olisi varaa alkaa kartuttaa omaisuutta ja investoida kestävämpään maankäyttöön. Tällä hetkellä kuitenkin isolle osalle herreralaisia perheitä tuo raja on kaukana tavoittamattomissa. Miten päästä yli tuhannen dollarin kulutukseen perheenjäsentä kohden, mikäli elintaso ei yllä edes riittävään ravitsemukseen? Ja sittenkin, vaikka hyvinvointi kohenisi, ei ympäristön kannalta parannuksia ole välttämättä odotettavissa, mikäli karjalaumat kasvavat ja eroosioalttiit laitumet leviävät.

Feasibility of assimilating ASCAT surface winds into a Limited Area Model

Sea-surface wind observations of previous generation scatterometers have been successfully assimilated into Numerical Weather Prediction (NWP) models. Impact studies conducted with these assimilation implementations have shown a distinct improvement to model analysis and forecast accuracies. The Advanced Scatterometer (ASCAT), flown on Metop-A, offers an improved sea-surface wind accuracy and better data coverage when compared to the previous generation scatterometers. Five individual case studies are carried out. The effect of including ASCAT data into High Resolution Limited Area Model (HIRLAM) assimilation system (4D-Var) is tested to be neutral-positive for situations with general flow direction from the Atlantic Ocean. For northerly flow regimes the effect is negative. This is later discussed to be caused by problems involving modeling northern flows, and also due to the lack of a suitable verification method. Suggestions and an example of an improved verification method is presented later on. A closer examination of a polar low evolution is also shown. It is found that the ASCAT assimilation scheme improves forecast of the initial evolution of the polar low, but the model advects the strong low pressure centre too fast eastward. Finally, the flaws of the implementation are found small and implementing the ASCAT assimilation scheme into the operational HIRLAM suite is feasible, but longer time period validation is still required.

Rayleigh-testi periodisuudesta: muinaisegyptiläinen ennustuskalenteri sarjana aikapisteitä

Työssä perehdytään "päivienvalikoimistekstien" analysointiin Rayleigh'n testillä. Näissä muinaisegyptiläisissä teksteissä päiville on annettu nk. prognoosi, joka on jokaisen päivän kolmelle osalle joko "hyvä" tai "huono". Analyysin tavoitteena on selvittää, olivatko hyvät ja huonot päivät jakautuneet satunnaisesti vai periodisesti vuoden aikana. Prognooseista löytyvä 29.5 päivän periodi, jolle saadaan huomattavan korkea merkitsevyys, viittaa Kuun synodisen jakson läsnäoloon kalenterissa. Löytyvistä periodeista 7.5 ja 30 ilmenee myös muinaisegyptiläisen siviilikalenterin vaikutus ennustuksiin. Aikasarjoista löydetään myös merkitseviä periodeja, joilla on mahdollisesti numerologinen merkitys. Periodi 2.85 viittaa mahdollisesti muinaisegyptiläiseen havaintoon Algol-tähdestä, joka on yksi tähtitieteen tunnetuimmista pimennysmuuttujista. Kyseessä voi siis olla historian vanhin tunnettu muuttuvan tähden periodin määritys.

Aurinkotuulen dynaamisen paineen muutosten vaikutus ionosfäärin dynamiikkaan

Monissa viimeaikaisissa tutkimuksissa on tutkittu aurinkotuulen dynaamisen paineen vaikutusta revontulialueen hiukkaspresipitaatioon. Tutkimukset ovat kuitenkin perustuneet muutamaan yksittäiseen tapaukseen ja laskevan dynaamisen paineen vaikutuksia ei juuri ole tarkasteltu. Tämän opinnäytetyön tavoitteena oli selvittää suuremmasta statistiikasta aurinkotuulen dynaamisen paineen nousujen ja laskujen vaikutusta ionosfäärin dynamiikkaan. Paineen muutoksia etsittiin ACE:n mittausdatasta vuosilta 1998 2004 ja ionosfäärin vastetta näihin muutoksiin tutkittiin käyttäen IMAGE-magnetometriverkon tuottamaa magneettisen aktiivisuuden indeksiä (IE-indeksi). Tutkimuksen kohteeksi valittiin 286 painepulssia, joita edelsi ja seurasi tasaisen paineen jakso, sekä 171 vastaavaa paineen laskua (negatiivista painepulssia). Näiden paineen muutosten ionosfäärivastetta tutkittaessa käytettiin tilastollista superposed epoch -menetelmää. Tutkimuksen tulokseksi saatiin selvä positiivinen korrelaatio IE-indeksin ja aurinkotuulen dynaamisen paineen välillä. Korrelaatio on vähemmän selkeää paineen laskujen kuin nousujen yhteydessä. Tälle on useita mahdollisia selityksia: Tutkimusaineisto paineen laskuista oli suppeampi. Toisin kuin painepulsseihin, paineen laskuihin ei liittynyt aurinkotuulen nopeuden muutosta. Lisäksi IMF:n magnitudi kasvoi lähes kaikkien paineen laskujen aikana, joten magnitudin ja IE:n välinen positiivinen korrelaatio voisi peittää paineen laskun vaikutusta. Eteläisen IMF:n painepulssien aikana IE:n muutokset aiheutuivat enimmäkseen läntisen elektrojetin vahvistumisesta ja pohjoisen IMF:n aikana havaitut IE:n muutokset liittyivät enemmän itäiseen elektrojettiin. Aurinkotuulen dynaamisen paineen ja elektrojettien korrelaation selitykseksi tarjotaan ionosfääriin saapuvien kentänsuuntaisten virtojen välityksellä tapahtuvaa kytkentää aurinkotuuleen. IMF:n z-komponentin suunnalla oli odotetun merkittävä vaikutus IE:n yleiseen tasoon, mutta IE:n korrelaatio paineen muutosten kanssa oli samaa tasoa z-komponentin etumerkistä riippumatta. Myös IMF:n y-komponentti osoittautui merkittäväksi pohjoisen IMF:n aikana, sillä tällöin IE:n yleinen taso oli korkeampi ja paineen muutosten vaikutus paljon selkeämpi IMF:n y-komponentin ollessa positiivinen kuin negatiivinen.

Havaintojärjestelmäkokeet numeerisessa sään ennustamisessa

Sään ennustamisessa tärkeä työväline on numeerinen säämalli, jossa ilmakehän tilan kuvaaminen perustuu niin sanottujen perusyhtälöiden ratkaisemiseen. Niiden avulla lasketaan tuulen nopeuden, ilmanpaineen, lämpötilan ja kosteuden muutokset pienin aika-askelin eteenpäin. Numeerinen säämalli tarvitsee lähtötiedokseen laadultaan hyviä havaintoja ilmakehän todellisesta tilasta. Joka vuorokausi kymmenet in-situ- ja kaukohavaintojärjestelmät tekevät havaintoja ilmakehästä sen pintakerroksesta ylärajaan asti. Pelkät havainnot eivät kuitenkaan riitä antamaan tarpeeksi tarkkoja lähtötietoja säämallille. Ongelman ratkaisu on data-assimilaatiojärjestelmä. Se yhdistää laatukontrollin läpikäyneen havaintotiedon ja mallitiedon, jota kutsutaan ennakkokentäksi, ja luo niiden avulla analyysin ilmakehän todellisesta tilasta. Havaintojärjestelmäkokeiden (OSE) avulla testataan havaintojärjestelmien vaikutuksia data-assimilaatiojärjestelmän tuottamien analyysien ja niistä tuotettujen sääennusteiden laatuun. OSE:n avulla selvitetään, kuinka hyvin saatavilla olevia havaintoja käytetään hyväksi, tai kannattaako jokin uusi havaintojärjestelmä ottaa mukaan operatiiviseen ennustusjärjestelmään. Tämän tutkielman aluksi tutustutaan lyhyesti numeerisiin säämalleihin, havaintojärjestelmiin ja dataassimilaatiojärjestelmiin, minkä jälkeen tehdään yleinen kirjallisuuskatsaus havaintojärjestelmäkokeiden suorittamisesta. Sen jälkeen keskitytään Doppler-säätutkan tuottamien tutkasäteen suuntaisten tuulen nopeushavaintojen hyödyntämiseen rajoitetun alueen HIRLAM-säämallissa, mitä on tutkittu viime vuosina Ilmatieteen laitoksessa (IL). Kaukohavaintojärjestelmien käyttö on lisääntynyt viime vuosien aikana kehittyneiden analyysimenetelmien ansiosta. Tavanomaisten in-situ- havaintojärjestelmien raju vähentäminen dataassimilaatiossa ei näytä kuitenkaan vielä olevan mahdollista. Kaukohavainnot ovat useiden OSE-kokeiden perusteella parantaneet analyysiä ja ennusteita erityisesti alueilla, joissa tavanomainen havaintoverkosto on harva. Tutkatuulihavaintojen on ajateltu tuovan parannuksia rajoitetun alueen säämalleihin, sillä niiden avulla saadaan tärkeää lisätietoa tuulen ageostrofisista ominaisuuksista. Sen johdosta pienen mittakaavan sääilmiöiden kuten meri- ja rinnetuulien ennustettavuuden toivotaan paranevan. IL:ssa on kehitetty tutkatuulihavaintojen käsittely- ja mallintamismenetelmiä, minkä jälkeen on suoritettu OSE Suomen tutkaverkoston tuulihavainnoilla aikavälille 1.-29.2.2008 HIRLAMin operatiiviselle 3D-VAR dataassimilaatiojärjestelmälle. Kyseisen OSE:n aineisto on saatu käyttöön tähän tutkielmaan. Kontrolliassimilaatiossa CON ovat mukana kaikki operatiiviset havaintojärjestelmät ja koeassimilaatioon RAD_ALL on syötetty myös tutkatuulihavainnot. Tässä tutkielmassa OSE:n tulokset todennetaan TEMP-tuulihavaintojen avulla tutkimalla ennakkokentän ja analyysin harhaa sekä satunnaisvirhettä. Tulosten perusteella tutkatuulihavainnot parantavat ennakkokenttää ja analyysiä erityisesti keskitroposfäärissä, mutta alatroposfäärissä vaikutus analyysiin on lähes neutraali. Koska tutkatuulihavainnot ulottuvat n. 4-6 km korkeuteen, ne eivät vaikuta ylätroposfäärin analyysiin. Tulokset eivät kuitenkaan ole tilastollisen testin perusteella tilastollisesti merkitseviä. Parhaimmillaan RAD_ALLassimilaation voidaan osoittaa olevan CON-assimilaatiota parempi 20% merkitsevyystasolla. Lopuksi suoritettu tapaustutkimus osoittaa, että tutkatuulihavaintojen vaikutus näkyy tuulen nopeuden analyysi-inkrementtikentässä sekä jossain määrin myös lyhyessä 12h pintapaine-ennusteessa Suomen alueella. Tapaustutkimuksen perusteella tutkatuulihavaintojen vaikutus analyysiin ja ennusteeseen näyttäisi olevan lähes neutraali. OSE:n toistaminen kesäkuukaudelle voisi olla hyödyllistä, koska talvella ei esiinny esimerkiksi merituulia. Tämän tutkielman tulosten perusteella tutkatuulihavaintojen käyttäminen HIRLAMin 3D-VAR assimilaatiojärjestelmässä on hyödyllistä. Avainsanat – Nyckelord – Keywords Havaintojärjestelmäkoe, data-assimilaatio, Doppler-tutkatuulihavainto Säilytyspaikka – Förvaringställe – Where deposited Kumpulan tiedekirjasto

F-18 Labelling Synthesis, Radioanalysis and Evaluation of A Dopamine Transporter and A Hypoxia Tracer

Positron emission tomography (PET) is an imaging technique in which radioactive positron-emitting tracers are used to study biochemical and physiological functions in humans and in animal experiments. The use of PET imaging has increased rapidly in recent years, as have special requirements in the fields of neurology and oncology for the development of syntheses for new, more specific and selective radiotracers. Synthesis development and automation are necessary when high amounts of radioactivity are needed for multiple PET studies. In addition, preclinical studies using experimental animal models are necessary for evaluating the suitability of new PET tracers for humans. For purification and analysing the labelled end-product, an effective radioanalytical method combined with an optimal radioactivity detection technique is of great importance. In this study, a fluorine-18 labelling synthesis method for two tracers was developed and optimized, and the usefulness of these tracers for possible prospective human studies was evaluated. N-(3-[18F]fluoropropyl)-2β-carbomethoxy-3β-(4-fluorophenyl)nortropane ([18F]β-CFT-FP) is a candidate PET tracer for the dopamine transporter (DAT), and 1H-1-(3-[18F]fluoro-2-hydroxypropyl)-2-nitroimidazole ([18F]FMISO) is a well-known hypoxia marker for hypoxic but viable cells in tumours. The methodological aim of this thesis was to evaluate the status of thin-layer chromatography (TLC) combined with proper radioactivity detection measurement systems as a radioanalytical method. Three different detection methods of radioactivity were compared: radioactivity scanning, film autoradiography, and digital photostimulated luminescence (PSL) autoradiography. The fluorine-18 labelling synthesis for [18F]β-CFT-FP was developed and carbon-11 labelled [11C]β-CFT-FP was used to study the specificity of β-CFT-FP for the DAT sites in human post-mortem brain slices. These in vitro studies showed that β-CFT-FP binds to the caudate-putamen, an area rich of DAT. The synthesis of fluorine-18 labelled [18F]FMISO was optimized, and the tracer was prepared using an automated system with good and reproducible yields. In preclinical studies, the action of the radiation sensitizer estramustine phosphate on the radiation treatment and uptake of [18F]FMISO was evaluated, with results of great importance for later human studies. The methodological part of this thesis showed that radioTLC is the method of choice when combined with an appropriate radioactivity detection technique. Digital PSL autoradiography proved to be the most appropriate when compared to the radioactivity scanning and film autoradiography methods. The very high sensitivity, good resolution, and wide dynamic range of digital PSL autoradiography are its advantages in detection of β-emitting radiolabelled substances.

Ionic Liquids and Microwaves in Promotion of Organic Synthesis : Friedel-Crafts reaction, deuterolabelling and O-Demethylation

The use of ionic liquids in chemical research has gained considerable interest and activity in recent years. Due to their unique and varied physicochemical properties, in comparison to molecular solvents, the potential applications for ionic liquids are enormous. The use of microwave irradiation, as a powerful dielectric heating technique, in synthetic organic chemistry has been known since 1986. Since then, it has gained significant recognition for its research and application in both academia and industry. The use of either ionic liquids or microwave irradiation in synthetic organic chemistry has been known to afford improved, alternative or complimentary selectivities, in comparison to traditional processes. In this study, the use of ionic liquids as solvents, co-solvents and catalytic media was explored in Friedel-Crafts, deuterolabelling and O-demethylation reactions. Alternative methods for the production of a variety of aromatic ketones using the Friedel-Crafts acylation methodology were investigated using ionic liquid catalyst or ionic liquid acidic additive systems. The disclosed methods, i.e. metal bistriflamides and chloroindate ionic liquids systems, possessed good catalytic activity in the synthesis of typical benzophenones. These catalytic systems were also recyclable. Microwave irradiation was found to be useful in the synthesis of various polyhydroxydeoxybenzoins and arylpropanones as synthetic precursors to naturally occurring or potentially bioactive compounds. Under optimized condition, the reaction occurred in only four minutes using systems such as [bmim][NTf2]/HNTf2 and [bmim][BF4]/BF3·OEt2. Naturally occurring polyphenols, such as isoflavones, can possess various types of biological or pharmacological activity. In particular, some are noted for their beneficial effects on human health. Isotopically labelled analogues of polyphenols are valuable as analytical standards in the quantification of these compounds from biological matrices. A new strategy for deuterolabelling of polyphenols was developed using ionic liquids as co-solvents and 35% DCl/D2O, as a cheap deuterium source, under microwave irradiation. Under these conditions, perdeuterated compounds were achieved in short reaction times, in high isotopic purity and in excellent yields. An O-demethylation reaction was developed, using an ionic liquid reaction medium with BBr3 for the deprotection of a variety methyl protected polyphenolic compounds, such as isoflavons and lignans. This deprotection procedure was found to be very practical as the reaction occurred under mild reaction conditions and in short reaction times. The isolation and purification steps were particularly straightforward and high yielding, in comparison to traditional methods.

Atomic Layer Deposition and Photocatalytic Properties of Titanium Dioxide Thin Films

Photocatalytic TiO2 thin films can be highly useful in many environments and applications. They can be used as self-cleaning coatings on top of glass, tiles and steel to reduce the amount of fouling on these surfaces. Photocatalytic TiO2 surfaces have antimicrobial properties making them potentially useful in hospitals, bathrooms and many other places where microbes may cause problems. TiO2 photocatalysts can also be used to clean contaminated water and air. Photocatalytic oxidation and reduction reactions proceed on TiO2 surfaces under irradiation of UV light meaning that sunlight and even normal indoor lighting can be utilized. In order to improve the photocatalytic properties of TiO2 materials even further, various modification methods have been explored. Doping with elements such as nitrogen, sulfur and fluorine, and preparation of different kinds of composites are typical approaches that have been employed. Photocatalytic TiO2 nanotubes and other nanostructures are gaining interest as well. Atomic Layer Deposition (ALD) is a chemical gas phase thin film deposition method with strong roots in Finland. This unique modification of the common Chemical Vapor Deposition (CVD) method is based on alternate supply of precursor vapors to the substrate which forces the film growth reactions to proceed only on the surface in a highly controlled manner. ALD gives easy and accurate film thickness control, excellent large area uniformity and unparalleled conformality on complex shaped substrates. These characteristics have recently led to several breakthroughs in microelectronics, nanotechnology and many other areas. In this work, the utilization of ALD to prepare photocatalytic TiO2 thin films was studied in detail. Undoped as well as nitrogen, sulfur and fluorine doped TiO2 thin films were prepared and thoroughly characterized. ALD prepared undoped TiO2 films were shown to exhibit good photocatalytic activities. Of the studied dopants, sulfur and fluorine were identified as much better choices than nitrogen. Nanostructured TiO2 photocatalysts were prepared through template directed deposition on various complex shaped substrates by exploiting the good qualities of ALD. A clear enhancement in the photocatalytic activity was achieved with these nanostructures. Several new ALD processes were also developed in this work. TiO2 processes based on two new titanium precursors, Ti(OMe)4 and TiF4, were shown to exhibit saturative ALD-type of growth when water was used as the other precursor. In addition, TiS2 thin films were prepared for the first time by ALD using TiCl4 and H2S as precursors. Ti1-xNbxOy and Ti1-xTaxOy transparent conducting oxide films were prepared successfully by ALD and post-deposition annealing. Highly unusual, explosive crystallization behaviour occurred in these mixed oxides which resulted in anatase crystals with lateral dimensions over 1000 times the film thickness.

Parameters Affecting the Extraction of Polycyclic Aromatic Hydrocarbons with Pressurised Hot Water

Pressurised hot water extraction (PHWE) exploits the unique temperature-dependent solvent properties of water minimising the use of harmful organic solvents. Water is environmentally friendly, cheap and easily available extraction medium. The effects of temperature, pressure and extraction time in PHWE have often been studied, but here the emphasis was on other parameters important for the extraction, most notably the dimensions of the extraction vessel and the stability and solubility of the analytes to be extracted. Non-linear data analysis and self-organising maps were employed in the data analysis to obtain correlations between the parameters studied, recoveries and relative errors. First, pressurised hot water extraction (PHWE) was combined on-line with liquid chromatography-gas chromatography (LC-GC), and the system was applied to the extraction and analysis of polycyclic aromatic hydrocarbons (PAHs) in sediment. The method is of superior sensitivity compared with the traditional methods, and only a small 10 mg sample was required for analysis. The commercial extraction vessels were replaced by laboratory-made stainless steel vessels because of some problems that arose. The performance of the laboratory-made vessels was comparable to that of the commercial ones. In an investigation of the effect of thermal desorption in PHWE, it was found that at lower temperatures (200ºC and 250ºC) the effect of thermal desorption is smaller than the effect of the solvating property of hot water. At 300ºC, however, thermal desorption is the main mechanism. The effect of the geometry of the extraction vessel on recoveries was studied with five specially constructed extraction vessels. In addition to the extraction vessel geometry, the sediment packing style and the direction of water flow through the vessel were investigated. The geometry of the vessel was found to have only minor effect on the recoveries, and the same was true of the sediment packing style and the direction of water flow through the vessel. These are good results because these parameters do not have to be carefully optimised before the start of extractions. Liquid-liquid extraction (LLE) and solid-phase extraction (SPE) were compared as trapping techniques for PHWE. LLE was more robust than SPE and it provided better recoveries and repeatabilities than did SPE. Problems related to blocking of the Tenax trap and unrepeatable trapping of the analytes were encountered in SPE. Thus, although LLE is more labour intensive, it can be recommended over SPE. The stabilities of the PAHs in aqueous solutions were measured using a batch-type reaction vessel. Degradation was observed at 300ºC even with the shortest heating time. Ketones and quinones and other oxidation products were observed. Although the conditions of the stability studies differed considerably from the extraction conditions in PHWE, the results indicate that the risk of analyte degradation must be taken into account in PHWE. The aqueous solubilities of acenaphthene, anthracene and pyrene were measured, first below and then above the melting point of the analytes. Measurements below the melting point were made to check that the equipment was working, and the results were compared with those obtained earlier. Good agreement was found between the measured and literature values. A new saturation cell was constructed for the solubility measurements above the melting point of the analytes because the flow-through saturation cell could not be used above the melting point. An exponential relationship was found between the solubilities measured for pyrene and anthracene and temperature.