Coating carbon nanotubes with a polystyrene-based polymer protects against pulmonary toxicity.

BACKGROUND: carbon nanotubes (CNT) can have adverse effects on health. Therefore, minimizing the risk associated with CNT exposure is of crucial importance. The aim of this work was to evaluate if coating multi-walled CNT (MWCNT) with polymers could modify their toxicity, thus representing a useful strategy to decrease adverse health effects of CNT. We used industrially-produced MWCNT uncoated (NT1) or coated (50/50 wt%) with acid-based (NT2) or polystyrene-based (NT3) polymer, and exposed murine macrophages (RAW 264.7 cell line) or Balb/c mice by intratracheal administration. Biological experiments were performed both in vitro and in vivo, examining time- and dose-dependent effects of CNT, in terms of cytotoxicity, expression of genes and proteins related to oxidative stress, inflammation and tissue remodeling, cell and lung tissue morphology (optical and transmission electron microscopy), and bronchoalveolar lavage fluid content analysis.RESULTS: extensive physico-chemical characterization of MWCNT was performed, and showed, although similar dimensions for the 3 MWCNT, a much smaller specific surface area for NT2 and NT3 as compared to NT1 (54.1, 34 and 227.54 m(2)/g respectively), along with different surface characteristics. MWCNT-induced cytotoxicity, oxidative stress, and inflammation were increased by acid-based and decreased by polystyrene-based polymer coating both in vitro in murine macrophages and in vivo in lung of mice monitored for 6 months.CONCLUSIONS: these results demonstrate that coating CNT with polymers, without affecting their intrinsic structure, may constitute a useful strategy for decreasing CNT toxicity, and may hold promise for improving occupational safety and that of general the user.

Cross-immunoreactivity between anti-potato apyrase antibodies and mammalian ATP diphosphohydrolases: potential use of the vegetal protein in experimental schistosomiasis

We have previously showed that Schistosoma mansoni ATP-diphosphohydrolase and Solanum tuberosum potato apyrase share epitopes and the vegetable protein has immunostimulatory properties. Here, it was verified the in situ cross-immunoreactivity between mice NTPDases and anti-potato apyrase antibodies produced in rabbits, using confocal microscopy. Liver samples were taken from Swiss Webster mouse 8 weeks after infection with S. mansoni cercariae, and anti-potato apyrase and TRITC-conjugated anti-rabbit IgG antibody were tested on cryostat sections. The results showed that S. mansoni egg ATP diphosphohydrolase isoforms, developed by anti-potato apyrase, are expressed in miracidial and egg structures, and not in granulomatous cells and hepatic structures (hepatocytes, bile ducts, and blood vessels). Therefore, purified potato apyrase when inoculated in rabbit generates polyclonal sera containing anti-apyrase antibodies that are capable of recognizing specifically S. mansoni ATP diphosphohydrolase epitopes, but not proteins from mammalian tissues, suggesting that autoantibodies are not induced during potato apyrase immunization. A phylogenetic tree obtained for the NTPDase family showed that potato apyrase had lower homology with mammalian NTPDases 1-4, 7, and 8. Further analysis of potato apyrase epitopes could implement their potential use in schistosomiasis experimental models.

Symmetry-breaking in cumulative measures of shapes of polymer models.

Using numerical simulations we investigate shapes of random equilateral open and closed chains, one of the simplest models of freely fluctuating polymers in a solution. We are interested in the 3D density distribution of the modeled polymers where the polymers have been aligned with respect to their three principal axes of inertia. This type of approach was pioneered by Theodorou and Suter in 1985. While individual configurations of the modeled polymers are almost always nonsymmetric, the approach of Theodorou and Suter results in cumulative shapes that are highly symmetric. By taking advantage of asymmetries within the individual configurations, we modify the procedure of aligning independent configurations in a way that shows their asymmetry. This approach reveals, for example, that the 3D density distribution for linear polymers has a bean shape predicted theoretically by Kuhn. The symmetry-breaking approach reveals complementary information to the traditional, symmetrical, 3D density distributions originally introduced by Theodorou and Suter.

Aproximació a l'evolució del paisatge vegetal a les comarques de la Selva i del Vallès

L'objectiu d'aquest article és presentar les línies bàsiques de l'evolució del paisatge vegetal d'una part d'una àrea geogràfica que des de l'antiguitat ha estat un passadís històric d'assentaments i comunicacions i que comprèn les comarques de la Selva, del Vallès Oriental i del Vallès Occidental Biogeogràficament es tracta d'una zona de contacte entre el món mediterrani, representat a nivell climàtic per l'alzinar litoral, i l'eurosiberià, que té com a principals comunitats climàtiques la roureda de roure martinenc i la fageda amb el·lèbor verd

Edge vascular response after polymer-free vs. polymer-based paclitaxel-eluting stent implantation.

BACKGROUND It is unknown if lack of polymer can provoke a different edge response in drug-eluting stents. The aim of this study was to compare edge vascular response between polymer-free paclitaxel-eluting stent (PF-PES) and polymer-based paclitaxel-eluting stents (PB-PES). METHODS AND RESULTS: A total of 165 eligible patients undergoing percutaneous coronary intervention were prospectively randomized 1:1 to receive either PF-PES or PB-PES. Those patients with paired intravascular ultrasound (IVUS) after procedure and at 9-month follow-up were included in this analysis.Seventy-six patients with 84 lesions, divided into PB-PES (38 patients, 41 lesions) and PF-PES groups (38 patients, 43 lesions) had paired post-procedure and 9-month follow-up IVUS and were therefore included in this substudy. There was a significant lumen decrease at the proximal edge of PF-PES (from 9.02±3.06 mm(2)to 8.47±3.05 mm(2); P=0.040), and a significant plaque increase at the distal edges of PF-PES (from 4.39±2.73 mm(2)to 4.78±2.63 mm(2); P=0.004). At the distal edge there was a significant plaque increase in the PF-PES compared to PB-PES (+8.0% vs. -0.6%, respectively; P=0.015) with subsequent lumen reduction (-5.2% vs. +6.0%, respectively; P=0.024). CONCLUSIONS PF-PES had significant plaque increase and lumen reduction at the distal edge as compared to PB-PES, probably due to difference in polymer-based drug-release kinetics between the 2 platforms.

Field Evaluation of Elliptical Fiber Reinforced Polymer Dowel Performance, June 2005

Fiber reinforced polymer (FRP) composite materials are making an entry into the construction market in both buildings and pavements. The application to pavements so far has come in the form of joint reinforcement (dowels and tie bars). FRP resistance to salt corrosion in dowels has made it an alternative to standard epoxy-coated steel dowels for pavements. Iowa State University has completed a large amount of laboratory research to determine the diameter, spacing, and durability of FRP dowels. This report documents the performance of elliptical FRP dowels installed in a field situation. Ten joints were monitored in three consecutive test sections, for each of three dowel spacings (10, 12, and 15 inches) including one instrumented dowel in each test section. The modulus of dowel bar support was determined using falling weight deflectometer (FWD) testing and a loaded crawl truck. FWD testing was also used to determine load transfer efficiency across the joint. The long-term performance and durability of the concrete was also evaluated by monitoring faulting and joint opening measurements and performing visual distress surveys at each joint. This report also contains similar information for standard round, medium elliptical, and heavy elliptical steel dowels in a portion of the same highway. In addition, this report provides a summary of theoretical analysis used to evaluate joint differential deflection for the dowels.

Neuroprotective gene therapy for Huntington's disease, using polymer-encapsulated cells engineered to secrete human ciliary neurotrophic factor: results of a phase I study.

Huntington's disease (HD) is a monogenic neurodegenerative disease that affects the efferent neurons of the striatum. The protracted evolution of the pathology over 15 to 20 years, after clinical onset in adulthood, underscores the potential of therapeutic tools that would aim at protecting striatal neurons. Proteins with neuroprotective effects in the adult brain have been identified, among them ciliary neurotrophic factor (CNTF), which protected striatal neurons in animal models of HD. Accordingly, we have carried out a phase I study evaluating the safety of intracerebral administration of this protein in subjects with HD, using a device formed by a semipermeable membrane encapsulating a BHK cell line engineered to synthesize CNTF. Six subjects with stage 1 or 2 HD had one capsule implanted into the right lateral ventricle; the capsule was retrieved and exchanged for a new one every 6 months, over a total period of 2 years. No sign of CNTF-induced toxicity was observed; however, depression occurred in three subjects after removal of the last capsule, which may have correlated with the lack of any future therapeutic option. All retrieved capsules were intact but contained variable numbers of surviving cells, and CNTF release was low in 13 of 24 cases. Improvements in electrophysiological results were observed, and were correlated with capsules releasing the largest amount of CNTF. This phase I study shows the safety, feasibility, and tolerability of this gene therapy procedure. Heterogeneous cell survival, however, stresses the need for improving the technique.

Field Evaluation of Elliptical Fiber Reinforced Polymer Dowel Performance, June 2003

Fiber composite materials (FRP) are making an entry into the construction market in both buildings and pavements. The application to pavements comes in the form of joint reinforcement (dowels and tie bars) to date. FRP resistance to salt corrosion in dowels has made it an alternative to standard epoxy coated dowels for pavements. Iowa State University has completed a large amount of laboratory research into the determination of diameter, spacing, and durability of FRP dowels. This report documents the installation of a series of FRP elliptical-shaped dowel joints (including instrumented units) in a field situation and the beginning of a two-year study to compare laboratory results to in-service pavements. Ten joints were constructed for each of three dowel spacings of 10, 12, and 15 inches ( 254, 305, and 381 mm) with one instrumented joint in each test section. The instrumented bars will be load tested with a loaded truck and FWD testing.

Micro-patterning of biomolecules on polymer substrates.

UV−excimer laser photoablation was used, in combination with surface blocking techniques, to pattern proteins on the surfaces of polyimide and poly(ethylene terephthalate). This technique involves physical adsorption of avidin through laser-defined openings in low-temperature laminates or adsorbed protein blocking layers. Visualization of biomolecular patterns were monitored using avidin and fluorescein-labeled biotin as a model receptor−ligand couple. Adsorbed proteins could be shown to bind to UV-laser-treated polymer surfaces up to three times higher than on commercially available polymers. UV-laser photoablation was also used for the generation of three-dimensional structure, which leads to the possibility of biomolecule patterning within polymer-based microanalytical systems. The simplicity and easy handling of the described technique facilitate its application in microdiagnostic devices.

Mineralização do nitrogênio incorporado como material vegetal em três solos da Amazônia Central

A mineralização do N proveniente do resíduo de feijão-caupi marcado com 15N foi estudada em condições de laboratório de setembro a dezembro de 1992. O material vegetal foi incorporado em amostras dos três principais solos da Amazônia Central: dois de terra firme, classificados como latossolo amarelo e podzólico vermelho-amarelo, e um de várzea, classificado como glei pouco húmico (GP). As variações nos teores e na forma de N mineral provenientes do resíduo de caupi foram relacionadas com as características químicas dos solos estudados. No latossolo e no podzólico, a incorporação do resíduo de caupi aumentou significativamente a mineralização do N, sendo a forma amoniacal predominante, enquanto, no GP, a forma nítrica preponderou. Nos solos de terra firme, a incorporação do resíduo de caupi aumentou a mineralização do N orgânico do solo, indicando a ocorrência do efeito "priming". Após 60 dias de incubação, cerca de 30 (podzólico) a 40% (latossolo) do N proveniente do caupi foi mineralizado nos solos de terra firme, enquanto no de várzea somente 18% foi mineralizado nesse período. Tais resultados mostram o potencial que essa leguminosa apresenta como fornecedora de N para as plantas nos solos de terra firme da Amazônia Central.

Comparação entre os métodos da transeção linear e fotográfico na avaliação de cobertura vegetal morta, sob dois métodos de preparo, após a colheita da soja

A eficácia da cobertura vegetal morta no controle da erosão pode ser avaliada através de dois indicadores principais: a porcentagem de cobertura do solo pelos resíduos culturais e sua persistência sobre a superfície ao longo do tempo. O preparo do solo, por sua vez, pode exercer influência significativa sobre esses indicadores. O trabalho foi realizado no campo, no município de Eldorado do Sul, Depressão Central do Rio Grande do Sul. Avaliou-se a persistência da cobertura vegetal morta durante um período de pousio, que foi de maio de 1989 a abril de 1990, em sucessão à cultura da soja. Os resíduos dessa cultura foram manejados sem preparo, por escarificação e por gradagem. A porcentagem de cobertura do solo pelos resíduos culturais foi quantificada pelo método fotográfico e pelo da transeção linear. A cultura da soja produziu cobertura vegetal morta em pequena quantidade e de baixa durabilidade. A distribuição dos resíduos na superfície, sem preparo do solo, foi o tratamento que possibilitou melhor correlação (R²) entre os índices de cobertura obtidos pelos dois métodos testados. Nas áreas sob gradagem ou escarificação do solo, os índices de cobertura obtidos pelo método fotográfico foram superiores aos da transeção linear, enquanto, na área sem preparo do solo, houve similaridade entre os resultados dos dois métodos.

Relações da erosão em entressulcos com o tipo e com a quantidade de resíduo vegetal na superfície do solo

Os resíduos vegetais na superfície do solo são muito efetivos em dissipar a energia de impacto das gotas de chuva, além de constituírem barreira física ao livre escoamento superficial da água. A presença desses resíduos em contato direto com a superfície do solo pode influenciar, decisivamente, a erosão em entressulcos. Este estudo objetivou avaliar as relações da erosão em entressulcos com a quantidade de resíduo vegetal em cobertura e verificar as diferenças nessas relações para palha de milho e palha de trigo. Um experimento de campo foi instalado no Centro de Pesquisa de Florestas e Conservação do Solo da FEPAGRO, em Santa Maria, RS, em Podzólico Vermelho-Escuro franco-arenoso. As parcelas experimentais mediam 0,50 x 0,75 m, com a maior dimensão no sentido do declive do terreno, que era de 0,17 m m-1, arranjadas em quatro blocos completos ao acaso. Palhas de milho e de trigo, picadas em fragmentos de 7,5 cm, foram distribuídas, nas parcelas, sobre solo recentemente preparado, em quantidades de 0,00, 0,05, 0,10, 0,20, 0,40 e 0,80 kg m-2. Em seguida, foi aplicada uma chuva simulada de intensidade média de 67 mm h-1 e duração de 90 min. As taxas de perdas de solo e água por erosão em entressulcos variaram ao longo da chuva, dependendo da quantidade de resíduo vegetal existente na superfície do solo, porém não foram observadas variações significativas em relação ao tipo de palha. A relação da erosão em entressulcos com a fração do solo coberto (dada em função da quantidade de palha) pode ser expressa por meio de uma equação exponencial. Por ser um modelo simples, com medidas de fácil obtenção, sugere-se esse modelo para estimar o subfator cobertura do solo em entressulcos por resíduos em contato direto com a superfície.

Propriedades químicas de uma Terra Roxa Estruturada influenciadas pela cobertura vegetal de inverno e pela adubação orgânica e mineral

O presente trabalho teve por objetivo avaliar a influência da cobertura vegetal de inverno, constituída de uma associação de aveia preta (Avena strigosa Schreb) com nabo forrageiro (Raphanus sativus L.), da adubação orgânica com esterco de aves e da adubação mineral sobre propriedades químicas de uma Terra Roxa Estruturada do estado de Santa Catarina. As análises foram realizadas em amostras de solo coletadas em agosto de 1994 e janeiro de 1995, nas profundidades de 0-10, 10-20 e 20-30 cm, em um experimento iniciado em 1990. Observou-se que a cobertura vegetal de inverno mostrou-se eficiente na manutenção de nutrientes, especialmente o potássio, e dos níveis de carbono orgânico, dentro dos limites da camada arável. O uso de adubo orgânico proporcionou acúmulo de nutrientes no solo, enquanto os adubos organomineral e mineral mostraram tendência de redução, principalmente dos níveis de potássio do solo.

Influência da cobertura vegetal de inverno e da adubação orgânica e, ou, mineral sobre as propriedades físicas de uma Terra Roxa Estruturada

O presente trabalho objetivou avaliar a influência da cobertura vegetal de inverno, constituída de uma associação de aveia preta (Avena strigosa Schreb) com nabo forrageiro (Raphanus sativus L.), da adubação orgânica com esterco de aves, da adubação orgânica e mineral e da adubação mineral sobre propriedades físicas do solo, numa Terra Roxa Estruturada do estado de Santa Catarina. As análises foram realizadas em amostras de solo coletadas em agosto de 1994 e janeiro de 1995, nas profundidades de 0-10, 10-20 e 20-30 cm, em um experimento iniciado em 1990. Verificou-se uma redução na estabilidade de agregados maiores que 4,76 mm, quando se fez uso de adubação orgânica, bem como aumento na estabilidade de agregados das classes de diâmetro 4,76 a 2,00 e 2,00 a 1,00 mm. Na camada de solo de 0-10 cm, observou-se que o adubo orgânico aumentou a macroporosidade e diminuiu a densidade do solo, enquanto a adubação orgânica e mineral reduziu a macroporosidade e aumentou a microporosidade e a densidade do solo.