Heterogeneity in inoculum potential and effectiveness of arbuscular mycorrhizal fungi

Arbuscular mycorrhizae are symbiotic associations among glomalean fungi and plant roots that often lead to enhanced water and nutrient uptake and plant growth. We describe experiments to test whether inoculum potential of arbuscular mycorrhizal (AM) fungal communities varies spatially within a broadleaf temperate forest, and also whether there is variability in the effectiveness of AM fungal communities in enhancing seedling growth. Inoculum potential of arbuscular mycorrhizal fungi in a temperate broad-leaved forest did not vary significantly among sites. Inoculum potential, measured as the extent to which the roots of red maple seedlings that had been germinated on sterile sand and then transplanted into the forest, were colonized by AM fungi, was similar in floodplain and higher elevation sites. It was as similar under ectomycorrhizal oaks as it was under red maples and other AM tree species. It was also similar among sites with deciduous understory shrubs with arbuscular mycorrhizae (spicebush, Lindera benzoin) and those with evergreen vegetation with ericoid mycorrhizae (mountain laurel, Kalmia latifolia). Where spicebush was the dominant understory shrub, inoculum potential was greater under gaps in the canopy than within the understory. Survivorship of transplanted red maple seedlings varied significantly over sites but was not strongly correlated with measures of inoculum potential. In a greenhouse growth experiment, arbuscular mycorrhizal fungal communities obtained from tree roots from the forest had different effects on plant growth. Seedlings inoculated with roots of red maple had twice the leaf area after 10 wk of growth compared to the AM community obtained from roots of southern red oaks. Thus, although there appears to be little heterogeneity in inoculum potential in the forest, there are differences in the effectiveness of different inocula. These effects have the potential to affect tree species diversity in forests by modifying patterns of seedling recruitment.

Thermal stability of mixed-cation alpha-sialon ceramics

A series of alpha-sialon (alpha') compositions containing mixed stabilising cations were prepared, by introducing additional CaO to a basic Sm alpha-sialon compositions. The thermal stability of these Sm-Ca-containing alpha-sialon phases was investigated using XRD, SEM and EDXS techniques. It was found that the addition of calcium into the Sm alpha-sialon systems greatly improved the stability of the alpha-sialon phases. Calcium was found to be incorporated into the alpha-sialon structure, coexistent with the samarium, and partitioning of the calcium and samarium was observed between the alpha' phase and grain boundary phases. This indicates a technique which may be used to improve the thermal stability of the alpha' phase while maintaining good refractory phases at the gialon grain boundaries. (C) 2003 Elsevier Science B.V. All rights reserved.

Thermal ecology and structural habitat use of two sympatric lizards (Carlia vivax and Lygisaurus foliorum) in subtropical Australia

The thermal ecology and structural habitat use of two closely related sympatric lizards, Carlia vivax (de Vis) and Lygisaurus foliorum de Vis, were examined in an open sclerophyll forest in subtropical Australia. Comparable mean body temperatures (T-b) and habitat temperatures (T-hab) at the point of capture were recorded for both species. However, sex- related differences in the thermal variables for C. vivax, with females displaying higher temperatures than males, resulted in some significant differences in T-b and T-hab between the species. Variation in T-b and T-hab within and between species was unrelated to time of capture. The difference in T-hab within C. vivax suggested that females were selecting warmer thermal environments than males. Both C. vivax and L. foliorum used most structural features of their habitat randomly as indicated by a similarity in canopy, shrub, ground, log and litter cover and litter depth between habitat surveys and random surveys. However, C. vivax displayed a preference for ground vegetation (height

Dormancy release in Lolium rigidum seeds is a function of thermal after-ripening time and seed water content

Dormancy release in seeds of Lolium rigidum Gaud. (annual ryegrass) was investigated in relation to temperature and seed water content. Freshly matured seeds were collected from cropping fields at Wongan Hills and Merredin, Western Australia. Seeds from Wongan Hills were equilibrated to water contents between 6 and 18% dry weight and after-ripened at constant temperatures between 9 and 50degreesC for up to 23 weeks. Wongan Hills and Merredin seeds at water contents between 7 and 17% were also after-ripened in full sun or shade conditions. Dormancy was tested at regular intervals during after-ripening by germinating seeds on agar at 12-h alternating 15degreesC (dark) and 25degreesC (light) periods. Rate of dormancy release for Wongan Hills seeds was a positive linear function of after-ripening temperature above a base temperature (T-b) of 5.4degreesC. A thermal after-ripening time model for dormancy loss accounting for seed moisture in the range 6-18% was developed using germination data for Wongan Hills seeds after-ripened at constant temperatures. The model accurately predicted dormancy release for Wongan Hills seeds after-ripened under naturally fluctuating temperatures. Seeds from Merredin responded similarly but had lower dormancy at collection and a faster rate of dormancy release in seeds below 9% water content.

An equivalent algorithm for simulating thermal effects of magma intrusion problems in porous rocks

An equivalent algorithm is proposed to simulate thermal effects of the magma intrusion in geological systems, which are composed of porous rocks. Based on the physical and mathematical equivalence, the original magma solidification problem with a moving boundary between the rock and intruded magma is transformed into a new problem without the moving boundary but with a physically equivalent heat source. From the analysis of an ideal solidification model, the physically equivalent heat source has been determined in this paper. The major advantage in using the proposed equivalent algorithm is that the fixed finite element mesh with a variable integration time step can be employed to simulate the thermal effect of the intruded magma solidification using the conventional finite element method. The related numerical results have demonstrated the correctness and usefulness of the proposed equivalent algorithm for simulating the thermal effect of the intruded magma solidification in geological systems. (C) 2003 Elsevier B.V. All rights reserved.

Field assessment of thermal after-ripening time for dormancy release prediction in Lolium rigidum seeds

Dormancy release was studied in four populations of annual ryegrass (Lolium rigidum) seeds to determine whether loss of dormancy in the field can be predicted from temperature alone or whether seed water content (WC) must also be considered. Freshly matured seeds were after-ripened at the northern and southern extremes of the Western Australian cereal cropping region and at constant 37degreesC. Seed WC was allowed to fluctuate with prevailing humidity, but full hydration was avoided by excluding rainfall. Dormancy was measured regularly during after-ripening by germinating seeds with 12-hourly light or in darkness. Germination was lower in darkness than in light/dark and dormancy release was slower when germination was tested in darkness. Seeds were consistently drier, and dormancy release was slower, during after-ripening at 37degreesC than under field conditions. However, within each population, the rate of dormancy release in the field (north and south) in terms of thermal time was unaffected by after-ripening site. While low seed WC slowed dormancy release in seeds held at 37degreesC, dormancy release in seeds after-ripened under Western Australian field conditions was adequately described by thermal after-ripening time, without the need to account for changes in WC elicited by fluctuating environmental humidity.

Assessing cost-effectiveness in mental health: family interventions for schizophrenia and related conditions

Objective: Existing evidence suggests that family interventions can be effective in reducing relapse rates in schizophrenia and related conditions. Despite this, such interventions are not routinely delivered in Australian mental health services. The objective of the current study is to investigate the incremental cost-effectiveness ratios (ICERs) of introducing three types of family interventions, namely: behavioural family management (BFM); behavioural intervention for families (BIF); and multiple family groups (MFG) into current mental health services in Australia. Method: The ICER of each of the family interventions is assessed from a health sector perspective, including the government, persons with schizophrenia and their families/carers using a standardized methodology. A two-stage approach is taken to the assessment of benefit. The first stage involves a quantitative analysis based on disability-adjusted life years (DALYs) averted. The second stage involves application of 'second filter' criteria (including equity, strength of evidence, feasibility and acceptability to stakeholders) to results. The robustness of results is tested using multivariate probabilistic sensitivity analysis. Results: The most cost-effective intervention, in order of magnitude, is BIF (A$8000 per DALY averted), followed by MFG (A$21 000 per DALY averted) and lastly BFM (A$28 000 per DALY averted). The inclusion of time costs makes BFM more cost-effective than MFG. Variation of discount rate has no effect on conclusions. Conclusions: All three interventions are considered 'value-for-money' within an Australian context. This conclusion needs to be tempered against the methodological challenge of converting clinical outcomes into a generic economic outcome measure (DALY). Issues surrounding the feasibility of routinely implementing such interventions need to be addressed.

Assessing cost-effectiveness - Mental health: introduction to the study and methods

Objective: The Assessing Cost-Effectiveness - Mental Health (ACE-MH) study aims to assess from a health sector perspective, whether there are options for change that could improve the effectiveness and efficiency of Australia's current mental health services by directing available resources toward 'best practice' cost-effective services. Method: The use of standardized evaluation methods addresses the reservations expressed by many economists about the simplistic use of League Tables based on economic studies confounded by differences in methods, context and setting. The cost-effectiveness ratio for each intervention is calculated using economic and epidemiological data. This includes systematic reviews and randomised controlled trials for efficacy, the Australian Surveys of Mental Health and Wellbeing for current practice and a combination of trials and longitudinal studies for adherence. The cost-effectiveness ratios are presented as cost (A$) per disability-adjusted life year (DALY) saved with a 95% uncertainty interval based on Monte Carlo simulation modelling. An assessment of interventions on 'second filter' criteria ('equity', 'strength of evidence', 'feasibility' and 'acceptability to stakeholders') allows broader concepts of 'benefit' to be taken into account, as well as factors that might influence policy judgements in addition to cost-effectiveness ratios. Conclusions: The main limitation of the study is in the translation of the effect size from trials into a change in the DALY disability weight, which required the use of newly developed methods. While comparisons within disorders are valid, comparisons across disorders should be made with caution. A series of articles is planned to present the results.

Cost-effectiveness of cognitive behavioural therapy and selective serotonin reuptake inhibitors for major depression in children and adolescents

Objective: To assess from a health sector perspective the incremental cost-effectiveness of cognitive behavioural therapy (CBT) and selective serotonin reuptake inhibitors (SSRIs) for the treatment of major depressive disorder (MDD) in children and adolescents, compared to 'current practice'. Method: The health benefit is measured as a reduction in disability-adjusted life years (DALYs), based on effect size calculations from meta-analysis of randomised controlled trials. An assessment on second stage filter criteria ('equity'; 'strength of evidence', 'feasibility' and 'acceptability to stakeholders') is also undertaken to incorporate additional factors that impact on resource allocation decisions. Costs and benefits are tracked for the duration of a new episode of MDD arising in eligible children (age 6-17 years) in the Australian population in the year 2000. Simulation-modelling techniques are used to present a 95% uncertainty interval (UI) around the cost-effectiveness ratios. Results: Compared to current practice, CBT by public psychologists is the most cost-effective intervention for MDD in children and adolescents at A$9000 per DALY saved (95% UI A$3900 to A$24 000). SSRIs and CBT by other providers are less cost-effective but likely to be less than A$50 000 per DALY saved (> 80% chance). CBT is more effective than SSRIs in children and adolescents, resulting in a greater total health benefit (DALYs saved) than could be achieved with SSRIs. Issues that require attention for the CBT intervention include equity concerns, ensuring an adequate workforce, funding arrangements and acceptability to various stakeholders. Conclusions: Cognitive behavioural therapy provided by a public psychologist is the most effective and cost-effective option for the first-line treatment of MDD in children and adolescents. However, this option is not currently accessible by all patients and will require change in policy to allow more widespread uptake. It will also require 'start-up' costs and attention to ensuring an adequate workforce.

Cost-effectiveness of dexamphetamine and methylphenidate for the treatment of childhood attention deficit hyperactivity disorder

Objective: To analyze from a health sector perspective the cost-effectiveness of dexamphetamine (DEX) and methylphenidate (MPH) interventions to treat childhood attention deficit hyperactivity disorder (ADHD), compared to current practice. Method: Children eligible for the interventions are those aged between 4 and 17 years in 2000, who had ADHD and were seeking care for emotional or behavioural problems, but were not receiving stimulant medication. To determine health benefit, a meta-analysis of randomized controlled trials was performed for DEX and MPH, and the effect sizes were translated into utility values. An assessment on second stage filter criteria ('equity', 'strength of evidence', 'feasibility' and 'acceptability to stakeholders') is also undertaken to incorporate additional factors that impact on resource allocation decisions. Simulation modelling techniques are used to present a 95% uncertainty interval (UI) around the incremental cost-effectiveness ratio (ICER), which is calculated in cost (in A$) per DALY averted. Results: The ICER for DEX is A$4100/DALY saved (95% UI: negative to A$14 000) and for MPH is A$15 000/DALY saved (95% UI: A$9100-22 000). DEX is more costly than MPH for the government, but much less costly for the patient. Conclusions: MPH and DEX are cost-effective interventions for childhood ADHD. DEX is more cost-effective than MPH, although if MPH were listed at a lower price on the Pharmaceutical Benefits Scheme it would become more cost-effective. Increased uptake of stimulants for ADHD would require policy change. However, the medication of children and wider availability of stimulants may concern parents and the community.