566 resultados para seismology
Resumo:
Work was first done on a known section, the south Boulder Section, in order to familiarize the student with the formations. Most of the area was mapped by plane table and telescopic alidade, general features being surveyed by automobile traverse and a pacing traverse.
Resumo:
The increase in hardness is attributed to the manganese silicide being precipitated from solid solution and deposited between crystal planes. The subsequent softening which occurs on prolonging the period of reheating is believed to be due to an agglomeration of the dispersed hardening agent.
Resumo:
The production of metallic manganese by electrolysis is of potential value for the recovery of this strategic metal from domestic deposits. These deposits are largely unsuitable for the production of ferromanganese, but they are amenable to low-cost leaching processes.
Resumo:
The Golden Sunlight Mine is in the northern part of the Cardwell mining district on the eastern slope of a small range that rises by a series of benches to an elevation of 7,200 at a point five miles east of the town of Whitehall in Jefferson County.
Resumo:
It has long been known that, prior to the deposition of Jurassic sediments, Montana was subjected to an intensive period of erosion. Mention of this may be found in numerous reports, especially those dealing with western Montana.
Resumo:
The present paper is a result of work done on the study of structures of eutectics of a certain eutectic-forming binary systems. In this research work no systems with intermetallic compounds have been studied.
Resumo:
Since the discovery of oil in Montana in1916, the petroleum industry has advanced to a point where over 5,000,000 barrels of oil worthover $6,500,000 has been produced in each of the three past years (1936, 1937, and 1938).
Resumo:
The purpose of this paper is to furnish a qualitative method of comparing the degree of wetting of various solders upon different plate metals when several fluxes are used.
Resumo:
The metal powders may be produced in a number of different ways. In metals where the intercrystalline material is brittle enough, they may be ground in a ball mill or eddy mill. The fineness of such a powder is more or less controlled by the grain size of the original metal.
Resumo:
In metallurgical practice today some of the relatively rare metal Indium is recovered as a by-product from the ores of other metals. Indium is a soft, silvery—white metal belonging to the third group of the periodic classification. It is situated just above tin in the electrochemical series.
Resumo:
The successful application of the phenomenon of precipitation hardening to aluminum and copper has indicated the possibility of hardening all metals in the same way. The phenomenon of age hardening was discoveredin 1911, and since that time much research has been carried on in all parts of the world on various alloy systems.
Resumo:
All of the metals have definite melting points. When a metal is heated above the melting point, it exists as a liquid. Now if the melt is allowed to cool, it will solidify when a temperature corresponding to the melting point is reached. However, if one metal is added to another metal, both of which are mutually soluble in the liquid state, a certain effect can be noted. The melt will not solidify when the melting point of the pure metal is reached, but will freeze at a lower temperature.
Resumo:
The ore under investigation in this thesis is a copper-zinc ore which came from the state of New Mexico. The exact location is unobtainable. The purpose of the investigation was to determine the most effective means of concentration of the valuable minerals present in the ore.
Resumo:
The purpose of this thesis is to investigate the possibility of concentrating a low grade copper-nickel ore, to determine the most effective method of concentration, and to attempt to draw some conclusions to determine whether or not the concentrates produced would be of sufficient high grade to make the recovery of nickel and copper a profitable enterprise.
Resumo:
Electrolysis of molten mixtures of lead chloride and galena was carried out under various conditions of temperature, time, composition, and current densities; without a diaphram, and with various diaphrams. Continuous runs, with necessary additions of lead sulfide and lead chloride to maintain a melt of the proper composition, were attempted on a small scale.