Jätteenpolton tuhkien käsittelytekniikoiden ympäristövaikutukset

Jätteenpoltossa syntyvät tuhkat sisältävät paljon haitta-aineita, joiden vuoksi niitä ei yleensä voida suoraan sijoittaa kaatopaikoille. Käsittelyllä pyritään parantamaan tuhkien ominaisuuksia ja vähentämään haitta-aineiden liukoisuutta. Samalla kuitenkin käsittely kuluttaa raaka-aineita ja energiaa sekä aiheuttaa päästöjä. Tuhkien käsittelyn kokonaishyötyjä ja -haittoja ympäristön kannalta arvioitaessa tulisikin ottaa huomioon sekä käsiteltävän tuhkan parantuneet ominaisuudet että käsittelystä aiheutuneet ympäristökuormitukset. Tämän diplomityön tavoitteena oliselvittää jätteenpolton tuhkien käsittelystä aiheutuvia ympäristövaikutuksia tarkastelemalla esimerkinomaisesti neljää erilaista käsittelytekniikkaa (pesua, sementtikiinteytystä, Ferrox-prosessia ja vitrifiointia) sekä kahta muuta loppusijoitusvaihtoehtoa (mahdollisuutta sijoittaa tuhkat kaatopaikalle ilman käsittelyä ja kuljettamista Norjassa sijaitsevalle käsittely- ja loppusijoituslaitokselle). Tarkastelussa keskityttiin jätteenpolton ongelmallisimpiin tuhkajakeisiin, lentotuhkaan ja savukaasujen puhdistusjätteisiin eli APC-jätteisiin. Tavoitteena oli selvittää käsittelyvaihtoehdoista syntyvät ympäristökuormitukset ns. koko niiden elinkaaren ajalta, eli huomioiden käsittelyyn tarvittavien lisäaineiden valmistuksesta, itse käsittelyprosessista sekä loppusijoituksesta aiheutuvat kuormitukset. Tarkastelun perusteella eri käsittelyvaihtoehdot aiheuttavat hyvin erilaisia ja erisuuruisia ympäristökuormituksia. Lisäksi käsitellyn materiaalin ominaisuudet vaihtelevat huomattavasti käsittelytavasta riippuen. Tarkastelluista käsittelyvaihtoehdoista suurimmat ympäristökuormitukset ilmapäästöjen osalta aiheutuivat tyypillisesti joko käsittelyyn tarvittavien raaka-aineiden valmistuksesta tai itse käsittelyprosessin energiankulutuksesta. Loppusijoituksesta sen sijaan aiheutui ympäristöhaittoja kaatopaikkarakenteiden muodostamisesta sekä maaperään vapautuvista haitta-aineista, joiden määrä riippuu tuhkan käsittelyn tehokkuudesta.

Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials

Rapid manufacturing is an advanced manufacturing technology based on layer-by-layer manufacturing to produce a part. This paper presents experimental work carried out to investigate the effects of scan speed, layer thickness, and building direction on the following part features: dimensional error, surface roughness, and mechanical properties for DMLS with DS H20 powder and SLM with CL 20 powder (1.4404/AISI 316L). Findings were evaluated using ANOVA analysis. According to the experimental results, build direction has a significant effect on part quality, in terms of dimensional error and surface roughness. For the SLM process, the build direction has no influence on mechanical properties. Results of this research support industry estimating part quality and mechanical properties before the production of parts with additive manufacturing, using iron-based powders

Fibras de carbono: aplicações em eletroanalítica como material eletródico

The use of carbon fibers to develop new sensors and biosensors has received great attention due to its characteristics and electrochemical properties. A brief presentation about history, properties, characteristics, composition and structure of the carbon fibers are shown in this paper. Several applications of the carbon fibers in electroanalytical chemistry for determination of metals and organic molecules in environmental and clinical samples are also described.

Permuurahaishapon valmistaminen mikroreaktorissa

Kandidaatintyön teoriaosassa perehdytään mikroreaktoreihin sekä niiden etuihin ja haasteisiin. Lisäksi esitellään lyhyesti, kuinka sekoitus näissä reaktoreissa voidaan järjestää erilaisten sekoituselementtien avulla sekä uusien ainetta lisäävien valmistusmenetelmien tarjoamat mahdollisuudet reaktorien valmistukselle. Mikroreaktorien edut liittyvät pääasiassa prosessin helpompaan hallittavuuteen, mikä johtaa mm. turvallisuuden lisääntymiseen ja energiasäästöihin. Lisäksi esitellään kokeellisessa osassa lähtöaineina käytettävät vetyperoksidi ja muurahaishappo, sekä tuotteena syntyvä permuurahaishappo ja sen käyttökohteita. Permuurahaishappoa käytetään mm. desinfiointiaineiden yhtenä komponenttina. Sitä voidaan käyttää myös paperikoneen vesikierron bakteerien tappamiseen. Epästabiiliutensa vuoksi permuurahaishappo voi räjähtää jopa huoneenlämmössä, mikä aiheuttaa merkittävän riskin sen varastoinnille ja kuljetukselle. Tästä syystä työssä tutkittu menetelmä permuurahaishapon valmistamiseksi mikroreaktorissa tarjoaa hyvän vaihtoehdon permuurahaishapon tuottamiseksi suoraan tarpeeseen. Kokeellisessa osassa permuurahaishappoa valmistettiin muurahaishaposta ja vetyperoksidista käyttäen rikkihappoa katalyyttinä reaktion nopeuttamiseksi. Lämpötilan ja viipymäajan vaikutusta tutkittiin permuurahaishapon muodostumiseen. Molempien nosto vaikutti edullisesti permuurahaishapon saantoon, mutta lämpötilan nosto lisää samalla räjähdysriskiä. Mikroreaktorissa lämpötilan nosto on kuitenkin suhteessa turvallisempaa makroreaktoriin verrattuna.

Laserpohjaisen ainetta lisäävän menetelmän kykenevyys kapeiden muotojen sekä terävien kulmien valmistuksessa

Tässä työssä tarkastellaan laserpohjaisen ainetta lisäävän työstön kykenevyyttä kapeiden muotojen sekä terävien kulmien valmistuksessa. Tarkkuuteen sekä kykenevyyteen vaikuttavia tekijöitä selvitetään aimmissa tutkimuksissa havaittujen seikkojen pohjalta, sekä menetelmän ominaisuuksien perusteella. Selvityksen pohjalta valmistetaan koekappaleet, jotka koettelevat valmistuslaitteiston kykenevyyttä. Lopuksi suoritetaan vertailu teoreettisten sekä käytännön haasteiden välillä.

Weldability of powder bed fusion fabricated stainless steel 316L sheets to cold rolled sheet metal

Weldability of powder bed fusion (PBF) fabricated components has come to discussion in past two years due to resent developments in the PBF technology and limited size of the machines used in the fabrication process. This study concentrated on effects of energy input of welding on mechanical properties and microstructural features of welds between PBF fabricated stainless steel 316L sheets and cold rolled sheet metal of same composition by the means of destructive testing and microscopic analysis. Optical fiber diameter, laser power and welding speed were varied during the experiments that were executed following one variable at a time (OVAT) method. One of the problems of welded PBF fabricated components has been lower elongations at break comparing to conventionally manufactured components. Decreasing energy input of the laser keyhole welding decreased elongations at break of the welded specimens. Ultimate tensile strengths were not affected significantly by the energy input of the welding, but fracturing of the specimens welded using high energy input occurred from the weld metal. Fracturing of the lower energy input welds occurred from the PBF fabricated base metal. Energy input was found to be critical factor for mechanical properties of the welds. Multioriented grain growth and formation of neck at fusion zone boundary on the cold rolled side of the weld was detected and suspected to be result from weld pool flows caused by differences in molten weld pool behaviour between the PBF fabricated and cold rolled sides of the welds.

Perspectives de l'usage de poudre de jaunes d’oeuf comme additif alimentaire contre Campylobacter jejuni chez le poulet : mode d'immunisation et effet de l’encapsulation

La campylobactériose est une zoonose causée par Campylobacter jejuni, une bactérie commensale du poulet, considérée comme la principale source de contamination humaine. C. jejuni est rarement retrouvé dans le tube digestif des poulets avant deux ou trois semaines d'âge. Ce qui pourrait s'expliquer par la transmission d'une immunité maternelle (anticorps IgY) transmise aux poussins via le jaune d'œuf. À la Chaire de recherche en Salubrité des Viandes (CRSV), la caractérisation d'anticorps IgY extraits de jaunes d'œufs frais a montré des niveaux de production d’anticorps différents selon le mode d’immunisation et suggère, in vitro, des effets sur ce pathogène. Ce qui laisse penser qu'en tant qu'additif alimentaire, une poudre de jaunes d'œuf potentialisée permettrait de lutter contre C. jejuni chez le poulet à griller. Dans ce travail, le processus de fabrication de l'additif (déshydratation par « Spray dry » puis encapsulation) a été évalué et les différents modes d'immunisation des poules pondeuses ont également été comparés. Les anticorps ont été extraits des différentes poudres de jaunes d'œuf ou du produit final encapsulé, et caractérisés in vitro (dosage / ELISA, test de mobilité, bactéricidie, western blot). Puis, une évaluation in vivo de la capacité de ces poudres encapsulées, incorporée à 5 % dans la moulée, afin de réduire ou de bloquer la colonisation intestinale des oiseaux par C. jejuni a été testée. In vitro, les résultats ont montré des concentrations d'anticorps et d'efficacité variables selon le type de vaccination. Dans cette étude, on a observé que le « Spray dry » a concentré les anticorps dans les poudres et que ces anticorps sont restés fonctionnels contre C. jejuni. On a également observé que l'encapsulation n’entraîne pas une perte quantitative des anticorps contenus dans les poudres. Malgré les résultats in vitro encourageants, les résultats in vivo ne révèlent aucune inhibition ou réduction de la colonisation des oiseaux par C. jejuni. L’absence d’efficacité la poudre de jaunes d’œuf encapsulée dans notre étude n’est pas due à une perte quantitative et/ou qualitative des anticorps comme soutenu dans les expériences in vitro. Ce qui démontre que les recherches doivent être poursuivies afin de déterminer les conditions optimales de l'utilisation de la poudre de jaune d'œuf in vivo, en tant qu'additif alimentaire chez les poulets

Stability lobes diagram identification and surface roughness monitoring in milling processes

La millora de la productivitat i la qualitat són indubtablement dues de les principals exigències del sector productiu modern i factors clau per la competitivitat i la supervivència. Dins aquest sector,la fabricació per arrancada de material juga encara avui en dia un paper protagonista tot i l'aparició de noves tècniques de conformat per addició.Indústries com l'aeronàutica, l'automobilística,la del motlle o l'energètica, depenen en bona part de les prestacions de les màquines-eina. Aquesta Tesi aborda dos aspectes rellevants quan es tracta de millorar de la productivitat i la qualitat del sector productiu: el problema del fimbrament, més conegut per la denominació anglosaxona chatter,i la monitorització de la rugositat superficial en el mecanitzat a alta velocitat.

Color measurement using a smartphone applied to Madeira wines

Computer vision is a field that uses techniques to acquire, process, analyze and understand images from the real world in order to produce numeric or symbolic information in the form of decisions [1]. This project aims to use computer vision to prepare an app to analyze a Madeira Wine and characterize it (identify its variety) by its color. Dry or sweet wines, young or old wines have a specific color. It uses techniques to compare histograms in order to analyze the images taken from a test sample inside a special container designed for this purpose. The color analysis from a wine sample using an image captured by a smartphone can be difficult. Many factors affect the captured image such as, light conditions, the background of the sample container due to the many positions the photo can be taken (different to capture facing a white wall or facing the floor for example). Using new technologies such as 3D printing it was possible to create a prototype that aims to control the effect of those external factors on the captured image. The results for this experiment are good indicators for future works. Although it’s necessary to do more tests, the first tests had a success rate of 80% to 90% of correct results. This report documents the development of this project and all the techniques and steps required to execute the tests.

Estudo comparativo de pás para aerogeradores de grande porte fabricadas em materiais compósitos reforçadas com fibra de carbono ou fibra de vidro

The research and development of wind turbine blades are essential to keep pace with worldwide growth in the renewable energy sector. Although currently blades are typically produced using glass fiber reinforced composite materials, the tendency for larger size blades, particularly for offshore applications, has increased the interest on carbon fiber reinforced composites because of the potential for increased stiffness and weight reduction. In this study a model of blade designed for large generators (5 MW) was studied on a small scale. A numerical simulation was performed to determine the aerodynamic loading using a Computational Fluid Dynamics (CFD) software. Two blades were then designed and manufactured using epoxy matrix composites: one reinforced with glass fibers and the other with carbon fibers. For the structural calculations, maximum stress failure criterion was adopted. The blades were manufactured by Vacuum Assisted Resin Transfer Molding (VARTM), typical for this type of component. A weight comparison of the two blades was performed and the weight of the carbon fiber blade was approximately 45% of the weight of the fiberglass reinforced blade. Static bending tests were carried out on the blades for various percentages of the design load and deflections measurements were compared with the values obtained from finite element simulations. A good agreement was observed between the measured and calculated deflections. In summary, the results of this study confirm that the low density combined with high mechanical properties of carbon fibers are particularly attractive for the production of large size wind turbine blades

Avaliação de concreto com adição de fibras de PET submetido a altas temperaturas

The concrete for centuries constituted an essential structural element in the construction industry due to its relative ease of forming, before the weather durability, low cost, its lower maintenance compared to other materials such as steel. However, when the concrete is exposed to high temperatures tends to lose its mechanical characteristics, and may even result in loss of section, which undermines the stability and mechanical strength of structural elements. The pathologies resulting from exposure to elevated temperatures ranging from cracks, pops up chipping explosives (spalling). Recently, the technology of concrete is closely related to the study of its microstructure. The use of fibers added to concrete has been revealed as a solution to increase the mechanical strength of the concrete, it acts directly on the distribution of efforts to act in the play within the microstructure. In this work we used recycled PET fibers embedded in concrete with 15x2mm fck = 30MPa, water/cement ratio of 0.46, in works made for verification of mechanical strength of this mixture submitted to high temperature. The specimens of concrete with addition of PET fibers were tested after exposure to temperatures: ambient (30ºC), 100°C, 200°C, 300°C, 400°C, 600°C and 900°C. It was found that the concrete loses significant strength when exposed to temperatures above 300°C, however the use of fiber PET may delay the risk of collapse of structures for the formation of a network of channels that facilitate the escape of vapor 'water, reducing the pore pressure inside the structural element

Envelhecimento ambiental em compósitos poliméricos à base de tecidos de reforços híbridos

The utilization of synthetic fibers for plastic reinforcement is more and more frequent and this growing interest requires that their mechanic behavior under the most variable conditions of structural applications be known. The use of such materials in the open and exposed to the elements is one of them. In this case, it becomes extremely necessary to study their mechanical properties (strength, stiffness) and the mechanism of fracture by which the environment aging them out. In order to do that, the material must be submitted to hot steam and ultraviolet radiation exposure cycles, according to periods of time determined by the norms. This study proposal deals with the investigation of accelerated environmental aging in two laminated polymeric composites reinforced by hybrid woven made up of synthetic fibers. The configurations of the laminated composites are defined as: one laminate reinforced with hybrid woven of glass fibers/E and Kevlar fibers/49 (LHVK) and the other laminate is reinforced with hybrid tissue of glass fibers/E and of carbon fibers AS4 (LHVC). The woven are plane and bidirectional. Both laminates are impregnated with a thermofix resin called Derakane 470-300 Epoxy Vinyl-Ester and they form a total of four layers. The laminates were industrially manufactured and were made through the process of hand-lay-up. Comparative analyses were carried out between their mechanical properties by submitting specimen to uniaxial loading tractions and three-point flexion. The specimen were tested both from their original state, that is, without being environmentally aging out, and after environmental aging. This last state was reached by using the environmental aging chamber

Análise do efeito higrotérmico no comportamento em fadiga de compósitos de PPS/fibras de carbono

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Flexural behavior of Sisal/Castor oil-Based Polyurethane and Sisal/Phenolic Composites

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Stacking faults in SiCf/SiC composite obtained by chemical vapor reaction process

SiC fiber-reinforced SiC matrix composite (SiCf/SiC) is one of the leading candidates in ceramic materials for engineering applications due to its unique combination of properties such as high thermal conductivity, high resistance to corrosion and working conditions. Fiber-reinforced composites are materials which exhibit a significant improvement in properties like ductility in comparison to the monolithic SiC ceramic. The SiCf/SiC composite was obtained from a C/C composite precursor using convertion reaction under high temperature and controlled atmosphere. In this work, SiC phase presented the stacking faults in the structure, being not possible to calculate the unit cell size, symmetry and bond lengths but it seem equal card number 29-1129 of JCPDS.