Re-use of fluoride contaminated bone char sludge in concrete

Managing sludge generated by treating groundwater contaminated with geogenic contaminants (fluoride, arsenic, and iron) is a major issue in developing nations. Their re-use in civil engineering applications is a possible pathway for reducing the impact on the geo-environment. This paper examines the re-use of one such sludge material, namely, fluoride contaminated bone char sludge, as partial replacement for fine aggregate (river-sand) in the manufacture of dense concrete specimens. Bone char sludge is being produced by defluoridation of contaminated groundwater in Nalagonda District, Andhra Pradesh, India. The impact of admixing 1.5-9% sludge contents on the compression strength and fluoride leaching potential of the sludge admixed concrete (SAC) specimens are examined. The compression strengths of the SAC specimensa re examined with respect to strength criteria for manufacture of dense, load-bearing concrete blocks. The fluoride release potential of the SAC specimens is examined with respect to standards specific to disposal of treated leachate into inland surface water.

Response of tropical turfgrasses to recycled water in southern Queensland

The effects of recycled water (effluent) on 8 tropical grasses growing in 100-L bags of sand were studied in Murrumba Downs, just north of Brisbane in southern Queensland (27.4°S, 153.1°E). The species used were: Axonopus compressus (broad-leaf carpetgrass), Cynodon dactylon (bermudagrass 'Winter Green') and C. dactylon x C. transvaalensis hybrid ('Tifgreen'), Digitaria didactyla (Queensland blue couch), Paspalum notatum (bahiagrass '38824'), Stenotaphrum secundatum (buffalograss 'Palmetto'), Eremochloa ophiuroides (centipedegrass 'Centec') and Zoysia japonica (zoysiagrass 'ZT-11'). From May 2002 to June 2003, control plots were irrigated with potable water and fertilised monthly. Plots irrigated with effluent received no fertiliser from May to August 2002 (deficient phase), complete fertilisers at control rates from September to December 2002 (recovery phase) and nitrogen (N) only at control rates from January to June 2003 (supplementary phase). In October 2002, the average shoot weight of plants from the effluent plots was 4% of that from potable plots, with centipedegrass less affected than the other species (relative growth of 20%). Shoot N concentrations declined by 40% in the effluent plots from May to August 2002 (1.8 ± 0.1%) along with phosphorus (P, 0.46 ± 0.02%), potassium (K, 1.6 ± 0.2%), sulfur (S, 0.28 ± 0.02%) and manganese (Mn, 19 ± 2 mg/kg) concentrations. Only the N and Mn concentrations were below the optimum for grasses. The grasses grew satisfactorily when irrigated with effluent if it was supplemented with N. Between January and June 2003 the average weight of shoots from the effluent plots was 116% of the weight of shoots from the control plots. Shoot nutrient concentrations were also similar in the 2 regimes at this time. The recycled water supplied 23% of the N required for maximum shoot growth, 80-100% of the P and K, and 500-880% of the S, calcium and magnesium. The use of recycled water represents savings in irrigation and fertiliser costs, and reductions in the discharge of N and P to local waterways. Effluent is currently about 50% of the cost of potable water with a saving of about AU$8000/ha.year for a typical sporting field.

Optimized group replacement scheduling for water pipeline network

Replacement of deteriorated water pipes is a capital-intensive activity for utility companies. Replacement planning aims to minimize total costs while maintaining a satisfactory level of service and is usually conducted for individual pipes. Scheduling replacement in groups is seen to be a better method and has the potential to provide benefits such as the reduction of maintenance costs and service interruptions. However, developing group replacement schedules is a complex task and often beyond the ability of a human expert, especially when multiple or conflicting objectives need to be catered for, such as minimization of total costs and service interruptions. This paper describes the development of a novel replacement decision optimization model for group scheduling (RDOM-GS), which enables multiple group-scheduling criteria by integrating new cost functions, a service interruption model, and optimization algorithms into a unified procedure. An industry case study demonstrates that RDOM-GS can improve replacement planning significantly and reduce costs and service interruptions.

Evaluation of partial replacement of live and fresh feeds with a formulated diet and the influence of weaning Panulirus ornatus phyllosomata onto a formulated diet during early ontogeny

We have evaluated the potential of a formulated diet as a replacement for live and fresh feeds for 7-day post-hatch Panulirus ornatus phyllosomata and also investigated the effect of conditioning phyllosomata for 14-21 days on live feeds prior to weaning onto a 100% formulated diet. In the first trial, the highest survival (>55%) was consistently shown by phyllosomata fed a diet consisting of a 50% combination of Artemia nauplii and 50% Greenshell mussel, followed by phyllosomata fed 50% Artemia nauplii and 50% formulated diet and, thirdly, by those receiving 100% Artemia nauplii. The second trial assessed the replacement of on-grown Artemia with proportions of formulated diet and Greenshell mussel that differed from those used in trial 1. Phyllosomata fed a 75% combination of formulated diet and 25% on-grown Artemia and 50% on-grown Artemia and 50% Greenshell mussel consistently showed the highest survival (>75%). Combinations of Greenshell mussel and formulated diet resulted in significantly (P < 0.05) reduced survival. In trial 3, phyllosomata were conditioned for 14, 18 or 21 days on Artemia nauplii prior to weaning onto a 100% formulated diet, which resulted in survival rates that were negatively related to the duration of feeding Artemia nauplii. In the final trial, phyllosomata were conditioned for 14 days on live on-grown Artemia prior to weaning onto one of three formulated diets (one diet with 44% CP and two diets with 50%). Phyllosomata fed a 44% CP diet consistently showed the highest survival (>35%) among all treatments, while those fed a 50%-squid CP diet showed a significant (P < 0.05) increase in mortality at day 24. The results of these trials demonstrate that hatcheries can potentially replace 75% of live on-grown Artemia with a formulated diet 7 days after hatch. The poor performance associated with feeding combinations of Greenshell mussel and formulated diet, and 100% formulated diet as well as conditioning phyllosomata for 14-21 days on live feeds prior to weaning onto a formulated diet highlights the importance of providing Artemia to stimulate feeding.

Responses in carcass lean pH at 24 hours post-mortem in lines of Large White pigs selected for growth rate on a fixed ration over a set time

A restricted maximum likelihood analysis applied to an animal model showed no significant differences (P > 0.05) in pH value of the longissimus dorsi measured at 24 h post-mortem (pH24) between high and low lines of Large White pigs selected over 4 years for post-weaning growth rate on restricted feeding. Genetic and phenotypic correlations between pH24 and production and carcass traits were estimated using all performance testing records combined with the pH24 measurements (5.05-7.02) on slaughtered animals. The estimate of heritability for pH24 was moderate (0.29 ± 0.18). Genetic correlations between pH24 and production or carcass composition traits, except for ultrasonic backfat (UBF), were not significantly different from zero. UBF had a moderate, positive genetic correlation with pH24 (0.24 ± 0.33). These estimates of genetic correlations affirmed that selection for increased growth rate on restricted feeding is likely to result in limited changes in pH24 and pork quality since the selection does not put a high emphasis on reduced fatness.

Osseointegrated total knee replacement connected to a lower limb prosthesis: 4 cases

Background and purpose — Osseointegrated implants are an alternative for prosthetic attachment in individuals with amputation who are unable to wear a socket. However, the load transmitted through the osseointegrated fixation to the residual tibia and knee joint can be unbearable for those with transtibial amputation and knee arthritis. We report on the feasibility of combining total knee replacement (TKR) with an osseointegrated implant for prosthetic attachment. Patients and methods — We retrospectively reviewed all 4 cases (aged 38–77 years) of transtibial amputations managed with osseointegration and TKR in 2012–2014. The below-the-knee prosthesis was connected to the tibial base plate of a TKR, enabling the tibial residuum and knee joint to act as weight-sharing structures. A 2-stage procedure involved connecting a standard hinged TKR to custom-made implants and creation of a skin-implant interface. Clinical outcomes were assessed at baseline and after 1–3 years of follow-up using standard measures of health-related quality of life, ambulation, and activity level including the questionnaire for transfemoral amputees (Q-TFA) and the 6-minute walk test. Results — There were no major complications, and there was 1 case of superficial infection. All patients showed improved clinical outcomes, with a Q-TFA improvement range of 29–52 and a 6-minute walk test improvement range of 37–84 meters. Interpretation — It is possible to combine TKR with osseointegrated implants.

Nutritional intake of opioid replacement therapy patients in community pharmacies: A pilot study

Aim: Opioid replacement therapy (ORT) is an established therapy for a patient group that has been associated with nutrition-related comorbidities. This paper aims to assess the nutritional intake and supplementation in ORT patients, determine the extent of nutritional/dietary advice supplied to ORT patients and to briefly examine patients' perception of pharmacists' provision of nutritional advice. Methods: The nutritional intake of ORT patients receiving treatment in community pharmacies within the Australian Capital Territory was assessed via a 24-hour recall survey. Food intake data were analysed via nutrient analysis software and compared with Australian Nutrition Reference Values and the nutrient intakes of the Australian population. Patients were surveyed to determine supplement use and perceptions of nutritional advice gained by pharmacists. Results: Potential insufficient intake of various macronutrients and micronutrients was observed in both sexes. Less than 25 of patients recorded supplement use. Fifteen percent of males and 21 of females stated that they had approached a pharmacist with a nutrition-related query. All patients who received nutritional advice followed the advice. Conclusions: ORT patients dosing at community pharmacies appear to have poor nutritional intake. ORT patients appear to be receptive to pharmacist's advice. Community pharmacists can potentially increase the beneficial health outcomes in this population through the proactive supply of accurate nutritional advice.

Effect of waiting time on health outcomes and service utilization : A prospective randomized study on patients admitted to hospital for hip or knee replacement

Although the principle of equal access to medically justified treatment has been promoted by official health policies in many Western health care systems, practices do not completely meet policy targets. Waiting times for elective surgery vary between patient groups and regions, and growing problems in the availability of services threaten equal access to treatment. Waiting times have come to the attention of decision-makers, and several policy initiatives have been introduced to ensure the availability of care within a reasonable time. In Finland, for example, the treatment guarantee came into force in 2005. However, no consensus exists on optimal waiting time for different patient groups. The purpose of this multi-centre randomized controlled trial was to analyse health-related quality of life, pain and physical function in total hip or knee replacement patients during the waiting time and to evaluate whether the waiting time is associated with patients health outcomes at admission. This study also assessed whether the length of waiting time is associated with social and health services utilization in patients awaiting total hip or knee replacement. In addition, patients health-related quality of life was compared with that of the general population. Consecutive patients with a need for a primary total hip or knee replacement due to osteoarthritis were placed on the waiting list between August 2002 and November 2003. Patients were randomly assigned to a short waiting time (maximum 3 months) or a non-fixed waiting time (waiting time not fixed in advance, instead the patient followed the hospitals routine practice). Patients health-related quality of life was measured upon being placed on the waiting list and again at hospital admission using the generic 15D instrument. Pain and physical function were evaluated using the self-report Harris Hip Score for hip patients and a scale modified from the Knee Society Clinical Rating System for knee patients. Utilization measures were the use of home health care, rehabilitation and social services, physician visits and inpatient care. Health and social services use was low in both waiting time groups. The most common services used while waiting were rehabilitation services and informal care, including unpaid care provided by relatives, neighbours and volunteers. Although patients suffered from clear restrictions in usual activities and physical functioning, they seemed primarily to lean on informal care and personal networks instead of professional care. While longer waiting time did not result in poorer health-related quality of life at admission and use of services during the waiting time was similar to that at the time of placement on the list, there is likely to be higher costs of waiting by people who wait longer simply because they are using services for a longer period. In economic terms, this would represent a negative impact of waiting. Only a few reports have been published of the health-related quality of life of patients awaiting total hip or knee replacement. These findings demonstrate that, in addition to physical dimensions of health, patients suffered from restrictions in psychological well-being such as depression, distress and reduced vitality. This raises the question of how to support patients who suffer from psychological distress during the waiting time and how to develop strategies to improve patients initiatives to reduce symptoms and the burden of waiting. Key words: waiting time, total hip replacement, total knee replacement, health-related quality of life, randomized controlled trial, outcome assessment, social service, utilization of health services

Early season replacement for Imperial Mandarin CT09014

Imperial mandarin is the dominant variety in the early season production time slot in Australia. It is well known to consumers, wholesalers and supermarkets, and growers continue to make new plantings of this variety. Despite this popularity, Imperial has major faults that cause problems for growers, consumers, and at other points along the supply chain. Fruit of the variety can be severely granulated, and this is the main quality problem cited by consumers. A second problem with Imperial is its unsuitability for export. Thirdly, the variety has low juice and sugar content, and develops poor colour under warm conditions. We propose a hybridisation project to specifically address these industry obstacles.

Hard Laborers Get Mini Extra Ration of Food Artworks

Digital Image

Estimating an Aggregate Economic Genotype to Facilitate Breeding and Selection of Strawberry Genotypes in Southeast Queensland

The Queensland strawberry (Fragaria ×ananassa) breeding program in subtropical Australia aims to improve sustainable profitability for the producer. Selection must account for the relative economic importance of each trait and the genetic architecture underlying these traits in the breeding population. Our study used estimates of the influence of a trait on production costs and profitability to develop a profitability index (PI) and an economic weight (i.e., change in PI for a unit change in level of trait) for each trait. The economic weights were then combined with the breeding values for 12 plant and fruit traits on over 3000 genotypes that were represented in either the current breeding population or as progenitors in the pedigree of these individuals. The resulting linear combination (i.e., sum of economic weight × breeding value for all 12 traits) estimated the overall economic worth of each genotype as H, the aggregate economic genotype. H values were validated by comparisons among commercial cultivars and were also compared with the estimated gross margins. When the H value of ‘Festival’ was set as zero, the H values of genotypes in the pedigree ranged from –0.36 to +0.28. H was highly correlated (R2 = 0.77) with the year of selection (1945–98). The gross margins were highly linearly related (R2 > 0.98) to H values when the genotype was planted on less than 50% of available area, but the relationship was non-linear [quadratic with a maximum (R2 > 0.96)] when the planted area exceeded 50%. Additionally, with H values above zero, the variation in gross margin increased with increasing H values as the percentage of area planted to a genotype increased. High correlations among some traits allowed the omission of any one of three of the 12 traits with little or no effect on ranking (Spearman’s rank correlation 0.98 or greater). Thus, these traits may be dropped from the aggregate economic genotype, leading to either cost reductions in the breeding program or increased selection intensities for the same resources. H was efficient in identifying economically superior genotypes for breeding and deployment, but because of the non-linear relationship with gross margin, calculation of a gross margin for genotypes with high H is also necessary when cultivars are deployed across more than 50% of the available area.

Fish Silage as Replacement of Fishmeal in Red Tilapia Feeds

We estimated the effect on growth and nutrient efficiency of replacing fishmeal with silage incorporated with rice bran in diets for fingerling red tilapia (Oreochromis mossambicus × Oreochromis niloticus × Oreochromis aureus) over 12 weeks. Isonitrogenous (300 g kg−1 protein dry matter basis) and isoenergetic (4450 Kcal gross energy kg−1) feed formulations with increasing levels of tilapia silage as a replacement for fishmeal were prepared: Diet 1 with no silage (0 g Kg−1), Diet 2 (250 g Kg−1), Diet 3 (500 g Kg−1), and Diet 4 (750 g Kg−1). Feed intake was similar among Diets 1, 2, and 3, while Diet 4 had a significantly lower intake. There was no significant difference (P > 0.05) in weight gain or specific growth rate (SGR), feed conversion ratio (FCR), and protein efficiency ratio (PER), among fish fed Diets 1, 2, and 3. Fish fed with Diet 4 had significantly lower weight gain; SGR and PER and significantly higher FCR. Organoleptic properties of the fish were not affected by the diets. The results of this study indicate that less expensive dried fish silage with rice bran is an alternative protein source for tilapia feed up to 50% of fishmeal replacement.

Dislocation after total hip replacement: there is no such thing as a safe zone for socket placement with the posterior approach

Introduction Malorientation of the socket contributes to instability after hip arthroplasty but the optimal orientation of the cup in relation to the pelvis has not been unequivocally described. Large radiological studies are few and problems occur with film standardisation, measurement methodology used and alternative definitions of describing acetabular orientation. Methods A cohort of 1,578 patients from a single institution is studied where all patient data was collected prospectively. Risk factors for patients undergoing surgery are analysed. Radiological data was compared between a series of non-dislocating hips and dislocating cases matched 2:1 by operation type, age and diagnosis. Results The overall dislocation rate for all 1,578 cases was 3.23% but the rate varied according to the type of surgery performed. The rate in uncomplicated primary cases was 2.4% which increased to 9.3% for second stage implantation for a two stage procedure for infection. There was no significant difference in the variability of the dislocating and non-dislocating groups for either inclination (p = 0.393) or anteversion (p = 0.661). Conclusions A “safe zone” for socket orientation to avoid dislocation could not be defined. The cause of dislocation is multifactorial, re-establishing the anatomic centre of rotation, balancing soft tissues and avoidance of impingement around the hip are important considerations.

Changes in energy efficiency in Australia: A decomposition of aggregate energy intensity using logarithmic mean Divisia approach

This paper provides an empirical estimation of energy efficiency and other proximate factors that explain energy intensity in Australia for the period 1978-2009. The analysis is performed by decomposing the changes in energy intensity by means of energy efficiency, fuel mix and structural changes using sectoral and sub-sectoral levels of data. The results show that the driving forces behind the decrease in energy intensity in Australia are efficiency effect and sectoral composition effect, where the former is found to be more prominent than the latter. Moreover, the favourable impact of the composition effect has slowed consistently in recent years. A perfect positive association characterizes the relationship between energy intensity and carbon intensity in Australia. The decomposition results indicate that Australia needs to improve energy efficiency further to reduce energy intensity and carbon emissions. © 2012 Elsevier Ltd.