Apoptosis in the early developing periodontium of rat molars

Development of the periodontium involves a series of complex steps that result in the formation of root dentine, cementum, bone and fibres of the ligament. These precisely controlled and timed events require the participation of the enamel organ derived epithelial cells of Hertwig's (HRS) and ectomesenchymal cells of the dental follicle. These events involve rapid turnover of the tissues and cells, including disappearance of epithelial cells of HRS. Thus, it seemed likely to us that programmed cell death (apoptosis) may play a role in the development of the periodontium. Fragments of first molars, obtained from 14- and 29-day-old rats, were fixed in glutaraldehyde-formaldehyde and processed for light and electron microscopy. For the TUNEL method for detection of apoptosis, specimens were fixed in 4% formaldehyde and embedded in paraffin. Results confirmed that epithelial cells of HRS maintain a close relationship with the forming dentine root, and that they may become trapped in the dentino-cemental junction. Some of the epithelial cells exhibited ultrastructural features which are consistent with the interpretation that they were undergoing programmed cell death, i.e. apoptosis. Periodontal fibroblast-like cells showed typical images of apoptosis and engulfed apoptotic bodies. TUNEL positive structures were present in all corresponding regions. It seems therefore that apoptosis of epithelial cells of HRS and fibroblast-like cells of the periodontal ligament constitutes an integral part of the developmental process of the tissues of the periodontium. (C) 2000 Wiley-Liss, Inc.

Strategies for developing NADH detector based on meldola blue in different immobilization methods: A comparative study

A comparative study was accomplished between two immobilization methodologies for the meldola's blue (MB), used to decrease the oxidation potential of NADH. The study was performed with glassy carbon electrode by electropolymerization of pyrrole and MB through the technique of cyclic voltammetry being evaluated the effect of the number of cycles to define the thickness and the stability of the film. With 25 cycles it was obtained the best result. They were also investigated the modification of the graphite electrode with film formed by the system sol-gel PPO 300 or PPO 4000 for the dip-coating, through two methods: occlusion and adsorption. The best method was it of adsorption of MB during 10 min, following by deposit of the film PPO 300, favored for the time of drying (24 hours). The adsorption of MB followed by PPO 300 deposition presented broader linear range than PPy methodology. ©2006 Sociedade Brasileira de Química.

Electrical devices obtained from polymeric precursors process

Nowadays, many investments have been made in the area of superconductor materials, with the aim to improve their potential technological applications. Applications on the energy transport using cables, to get high resolution images in the medicine use high magnetic fields, high speed signals use superconductor devices all of them are in crescent evidence and they are showing that the future is coming and next for this new kind of materials. Obviously that everything of this is possible due to the increasing of research with new materials, where the synthesis, characterization and applications are of the mainly objective of these researches. The production of cable for the energy transport has been in advanced stage as the bulks production is too. However, the film production that to aim at the electronic devices area is not as developed or it still need expensive investments. Thinking about that, we are developing a research where we may increase the relation of cost/benefits. Thereby, we are applying the polymeric precursors method to obtain films that will be used in the built of electronic devices. Thin films (mono and multilayers, on crystalline or metallic substrates, controlled thickness) of the BSCCO system have been obtained from dip coating deposition process with excellent results in terms of preferential orientation, controlled thickness, a large area, which may indicate future applications. Based on these results, we present an electrical circuit and their principal characteristics as superconductor transition (85K), transport current density and structure. DC four probes method, scanning electron microscopy, digital optical microscopy and X-ray diffractometry were some techniques used for the characterization of this superconductor electric device. © 2006 Materials Research Society.

Developing new radiotherapy techniques using linac based gamma radiation sources

A major challenge in cancer radiotherapy is to deliver a lethal dose of radiation to the target volume while minimizing damage to the surrounding normal tissue. We have proposed a model on how treatment efficacy might be improved by interfering with biological responses to DNA damage using exogenous electric fields as a strategy to drastically reduce radiation doses in cancer therapy. This approach is demonstrated at this Laboratory through case studies with prokaryotes (bacteria) and eukaryotes (yeast) cells, in which cellkilling rates induced by both gamma radiation and exogenous electric fields were measured. It was found that when cells exposed to gamma radiation are immediately submitted to a weak electric field, cell death increases more than an order of magnitude compared to the effect of radiation alone. This finding suggests, although does not prove, that DNA damage sites are reached and recognized by means of long-range electric DNA-protein interaction, and that exogenous electric fields could destructively interfere with this process. As a consequence, DNA repair is avoided leading to massive cell death. Here we are proposing the use this new technique for the design and construction of novel radiotherapy facilities associated with linac generated gamma beams under controlled conditions of dose and beam intensity.

Latin America and the Caribbean in the World Economy 2011-2012: Continuing crisis in the centre and new opportunities for developing economies

Includes bibliography

Globalization and liberalization: the impact on developing countries

Includes bibliography

Policy response to poverty and inequality in the developing world

Includes bibliography

Framework for implementation of the outcomes of the World Summit on Sustainable Development (WSSD) in the small island developing states of the Caribbean subregion

Includes bibliography

Review of the implementation of the Programme of Action for the Sustainable Development of Small Island Developing States in the Caribbean subregion, 1994-2004

This document contains a review of the implementation, in the Caribbean subregion, of the Programme of Action for the Sustainable Development of Small Island Developing States (SIDS POA). It is divided into two Parts. Part 1 sets out an overall review of the implementation experience and identifies the activities pursued, the achievements recorded, as well as the constraints that were encountered in the process. This Part also addresses some of the more general issues arising from the implementation process as the subregion and the international community, in general, sought to come to terms with the SIDS POA, in search of a more comprehensive sustainable development ethos. Part 1 also documents the operational implications of these aspects over the decade that has elapsed since the adoption of the POA. The presentation of the review findings by reference to more or less precisely defined time periods represents an attempt to chronicle the subregional experience in a manner which permits an appreciation of the evolution of the implementation process.

Concentration in liner shipping: its causes and impacts for ports and shipping services in developing regions

Includes bibliography

Disaster risk reduction in the education sector among selected Caribbean small island developing states

Caribbean Small Island Developing States (SIDS), by their very nature, are vulnerable to external shocks. Research shows that the Caribbean subregion experienced 165 natural disasters between 1990 and 2008 and the total impact of natural disasters on the subregion was estimated at US$136 billion. The impact on the social sectors was estimated at US$57 billion, or 42% of the total effect. As small open economies, the Caribbean SIDS are also vulnerable to the vagaries of the international economic system and have experienced declines in tourism, merchandise exports receipts, remittances and capital flows throughout the financial crisis. The negative impact of natural hazards exacerbates the capacity of Caribbean SIDS to overcome the development challenges, such as those posed by the current global economic and financial crisis. Disaster risk reduction (DRR), therefore, is of critical concern to subregional governments and their people. For the purpose of this study, six Caribbean SIDS were selected for detailed analyses on the macro socio-economic impact of extreme events to the education sector. They are the Cayman Islands, Grenada, Guyana, Haiti, Jamaica, and Montserrat. This paper proposes that better integration of DRR in the education sector cannot be easily achieved if policymakers do not recognize the social nature of risk perception and acceptance in Caribbean SIDS, which necessitates that risk reduction be treated as a negotiated process which engages all stakeholders.

Talent Management in Higher Education: Developing Emerging Leaders Within the Administration at Private Colleges and Universities

This research focused on identifying a series of successful practices relating to administrative talent management within the higher education setting. The field study included a thorough examination of seven small to mid-size private colleges and universities that have incorporated employee development strategies. These strategies were aimed at growing future leaders from within the organization in order to achieve continuity and support institutional priorities. Specifically, several focus areas were investigated including presidential vision, leadership commitment, talent management’s place among institutional priorities, program characteristics, and program evaluation. Among the commonalities that were gathered included support at the senior officer level who serve as advocates, mentors, and program facilitators, a strong connection between talent management and the institutions’ strategic plans, and a holistic approach to developing talent at all levels of the organizations. In addition, both coaching and opportunities for growth in the work environment were evident within several of the institutions. Also, academic leadership development was considered to be a part of the talent management strategy within three of the colleges and universities. The key differentiators included the incorporation of organizational and leadership competencies to provide focus toward the performance development process at two institutions, the implementation of a succession planning model at another institution, and the location of human resource generalists in departments across two of the institutions to identify learning opportunities for both individuals and work teams. Based on both the findings from the field study and the literature review, a comprehensive procedural model is introduced that serves to support human resource departments and higher education professionals, in general, who are looking to either begin or broaden their own talent management approach. However, despite the progress that has been made across several institutions noted throughout the research study, much more must be learned in terms of how the time and resources invested in talent management translates to institutional success. Advisor: James O‘Hanlon

Predictive models for mutations in mismatch repair genes: implication for genetic counseling in developing countries

Background: Lynch syndrome (LS) is the most common form of inherited predisposition to colorectal cancer (CRC), accounting for 2-5% of all CRC. LS is an autosomal dominant disease characterized by mutations in the mismatch repair genes mutL homolog 1 (MLH1), mutS homolog 2 (MSH2), postmeiotic segregation increased 1 (PMS1), post-meiotic segregation increased 2 (PMS2) and mutS homolog 6 (MSH6). Mutation risk prediction models can be incorporated into clinical practice, facilitating the decision-making process and identifying individuals for molecular investigation. This is extremely important in countries with limited economic resources. This study aims to evaluate sensitivity and specificity of five predictive models for germline mutations in repair genes in a sample of individuals with suspected Lynch syndrome. Methods: Blood samples from 88 patients were analyzed through sequencing MLH1, MSH2 and MSH6 genes. The probability of detecting a mutation was calculated using the PREMM, Barnetson, MMRpro, Wijnen and Myriad models. To evaluate the sensitivity and specificity of the models, receiver operating characteristic curves were constructed. Results: Of the 88 patients included in this analysis, 31 mutations were identified: 16 were found in the MSH2 gene, 15 in the MLH1 gene and no pathogenic mutations were identified in the MSH6 gene. It was observed that the AUC for the PREMM (0.846), Barnetson (0.850), MMRpro (0.821) and Wijnen (0.807) models did not present significant statistical difference. The Myriad model presented lower AUC (0.704) than the four other models evaluated. Considering thresholds of >= 5%, the models sensitivity varied between 1 (Myriad) and 0.87 (Wijnen) and specificity ranged from 0 (Myriad) to 0.38 (Barnetson). Conclusions: The Barnetson, PREMM, MMRpro and Wijnen models present similar AUC. The AUC of the Myriad model is statistically inferior to the four other models.

Effect of a video on developing skills in undergraduate nursing students for the management of totally implantable central venous access ports

Background: Handling Totally Implantable Access Ports (TIAP) is a nursing procedure that requires skill and knowledge to avoid adverse events. No studies addressing this procedure with undergraduate students were identified prior to this study. Communication technologies, such as videos, have been increasingly adopted in the teaching of nursing and have contributed to the acquisition of competencies for clinical performance. Objective: To evaluate the effect of a video on the puncture and heparinization of TIAP in the development of cognitive and technical competencies of undergraduate nursing students. Method: Quasi-experimental study with a pretest-posttest design. Results: 24 individuals participated in the study. Anxiety scores were kept at levels 1 and 2 in the pretest and posttest. In relation to cognitive knowledge concerning the procedure, the proportion of correct answers in the pretest was 0.14 (SD=0.12) and 0.90 in the posttest (SD=0.05). After watching the video, the average score obtained by the participants in the mock session was 27.20. Conclusion: The use of an educational video with a simulation of puncture and heparinization of TIAP proved to be a strategy that increased both cognitive and technical knowledge. This strategy is viable in the teaching-learning process and is useful as a support tool for professors and for the development of undergraduate nursing students. (C) 2011 Elsevier Ltd. All rights reserved.

An initial proposal for PDP of smes developing hospital furniture

A large percentage of the industrial SMEs has an organizational structure for product development too far from the adequate practices and models, elaborated by renowned authors with expertise in the theme of product development. On the other hand, the authors state that SMEs obtain considerable advantages by adopting a model of product development process (PDP) management. Healt is one of the most innovative sectors in the world, and countries like Brazil and Colombia are transitioning from a system that cares for contagious infecttions diseases where the drug product is the main form of treatment - to a system that cares for chronic degenerative conditions - where the equipment, including hospital furniture, has more relevance to the treatment. This change is offering better opportunities of specialized markets to hospital furniture SMEs that adopt an adquate PDF model. The present study proposes a first outline of a model of PDP management for industrial metal-mechanical SMEs that develop and manufacture hospital furniture, from a review of models proposed for great mechanical area.