Kestomagneettigeneraattorin staattorin mekaanisen rakenteen analysointi ja kehitys

Työssä tutkittiin kestomagneettigeneraattorin staattoriytimen aksiaalisen puristamisen ja lämpötilan vaikutuksia staattorin jännityksiin ja muodonmuutoksiin. Lisäksi tutkittiin aksiaalisen puristusjännityksen vaikutusta staattorin aksiaalisuuntaisen ominaismuodon taajuuteen. Rakenteesta tehtiin elementtimalli, jonka avulla laskettiin rakenteen siirtymät, jännitykset ja ominaistaajuudet. Rakenteen jännityksiä ja siirtymiä tutkittiin myös yksinkertaisella jousikuvauksella, jonka tuloksia verrattiin elementtimallilla saatuihin tuloksiin. Työn tavoitteena oli kehittää uusi staattorirakenne. Elementtimenetelmän tulosten perusteella staattorirakennetta voidaan yksinkertaistaa poistamalla nyt käytetty puristusrengas, jolloin rakenteesta tulee yksinkertaisempi ja kustannustehokkaampi.

Efeito da associação do herbicida clomazone a nanoesferas de alginato/quitosana na sorção em solos

Agrochemicals constitute the class of products most commonly found in water resources. Their high level of concentration is due to the fact that less than 0.1% of pesticides applied to crops reach their target. The present work aims to study the sorption of clomazone herbicide (associated or not with nanoparticles). The sorption tests, performed with the 2(4) factorial design, showed that the form of herbicide is the main factor for sorption of clomazone. The application of nanoparticles as delivery system for agrochemicals is a pressing area of study and can contribute for decrease in effects of clomazone in the environment.

Measurement and Improvement of Wet Paper Web Strength

Various strength properties of paper are measured to tell how well it resists breaks in a paper machine or in printing presses. The most often measured properties are dry tensile strength and dry tear strength. However, in many situations where paper breaks, it is not dry. For example, in web breaks after the wet pressing the dry matter content can be around 45%. Thus, wet-web strength is often a more critical paper property than dry strength. Both wet and dry strength properties of the samples were measured with a L&W tensile tester. Originally this device was not designed for the measurement of the wet web tensile strength, thus a new procedure to handle the wet samples was developed. The method was tested with Pine Kraft (never dried). The effect of different strength additives on the wet-web and dry paper tensile strength was studied. The polymers used in this experiment were aqueous solution of a cationic polyamidoamine-epichlorohydrin resin (PAE), cationic hydrophilised polyisocyanate and cationic polyvinylamine (PVAm). From all three used chemicals only Cationic PAE considerably increased the wet web strength. However it was noticed that at constant solids content all chemicals decreased the wet web tensile strength. So, since all chemicals enhanced solid content it can be concluded that they work as drainage aids, not as wet web strength additives. From all chemicals only PVAm increased the dry strength and two other chemicals even decreased the strength. As chemicals were used in strong diluted forms and were injected into the pulp slurry, not on the surface of the papersheets, changes in samples densities did not happen. Also it has to be noted that all these chemicals are mainly used to improve the wet strength after the drying of the web.

Dewatering of hard-to-dewater pulps

Nanocellulose has much potential for enhancing the tensile strength of paper but it slows down significantly drainage, restricting its use in industrial scale. Main objective of the work was to find ways to improve the dewatering of nanocellulose-containing papers. The effects of cationic potato starch, microparticle system and filler addition on dewatering and such key properties as formation, tensile strength and air permeance of manufactured paper were studied. Test points had 0, 4 or 8 % CNF and 0, 15 or 30 % PCC content. Based on earlier studies, 25 mg/g starch dosage was added to some test points. Modern microparticle system, consisted of cationic polyacrylamide and amorphous silica, was used in few test points. Dosages for both components were 0.3 and 0.6 mg/g, following the recommendations of the supplier. Also, the influences of CNF and filler on drying behaviour after different stages (drainage, wet pressing and cylinder drying) were estimated. Following trends were observed. Starch does not have unambiguous influence on dewatering. In some cases, it improved drainage slightly but effects on the properties of end product were discovered small. Filler quickened dewatering but large proportions were noticed to be detrimental for the drainage, air permeance and tensile strength. Microparticle system improved drainage notably, especially if CNF dosage was high. In addition, microparticle system increased tensile strength and decreased air permeance. However, its effects on formation were detrimental. Dewatering of nanocellulose-containing furnishes is treatable up to a certain point. In the end, such drainage times that were measured from test points which consisted only of pure kraft pulps are awkward to reach.

Kartonkimateriaalien muotoutuvuus vuokien valmistuksessa

Diplomityön tavoitteena oli tutkia erilaisten elintarvikekartonkien muotoutuvuutta prässäämällä valmistettujen vuokien valmistuksessa. Kirjallisuusosassa käsiteltiin mm. kartongin muotoutuvuuteen vaikuttavia ominaisuuksia sekä lämpötilan ja kosteuden vaikutusta muotoutuvuuteen. Lisäksi kirjallisuusosassa käytiin läpi vuokien valmistusprosessi, jossa vuoka-aihiot valmistetaan stanssaamalla ja vuoat prässäämällä. Lopuksi on esitetty vuokien valmistuksessa kartongin muotoutuvuuteen vaikuttavia ajoparametrejä. Kokeellisessa osassa valmistettiin prässäämällä vuokia erilaisista kartonkimateriaaleista. Jokaiselle materiaalille etsittiin sopivat ajoparametrit erilaisissa kosteuspitoisuuksissa ja vertailtiin niiden muotoutuvuutta. Työ sisälsi myös kaksi laminointikoeajoa, jonka tuloksena saatuja materiaaleja verrattiin referenssi vuokakartonkiin. Vuokien todettiin muotoutuvan parhaiten kosteuden ollessa 7 – 9,4 % välillä. Työssä erottui kartongit, jotka muotoutuivat muita paremmin sekä kartongit, jotka muotoutuivat muita huonommin. Näiden muotoutuvuutta pyrittiin selvittämään mitattujen paperiteknisten ominaisuuksien avulla, mutta selvää yksittäistä selittävää ominaisuutta ei löytynyt. Parhaiten muotoutuvuutta kuvasivat kartonkien kuitukoostumukset. Laminoitujen rakenteiden todettiin muotoutuvan vuokakartonkia paremmin. Tähän vaikuttivat laminaattien korkeammat lujuus- ja venymäarvot.

The Effects of Some Furnish and Paper Structure Related Factors on Wet Web Tensile and Relaxation Characteristics

The objective of this thesis was to identify the effects of different factors on the tension and tension relaxation of wet paper web after high-speed straining. The study was motivated by the plausible connection between wet web mechanical properties and wet web runnability on paper machines shown by previous studies. The mechanical properties of wet paper were examined using a fast tensile test rig with a strain rate of 1000%/s. Most of the tests were carried out with laboratory handsheets, but samples from a pilot paper machine were also used. The tension relaxation of paper was evaluated as the tension remaining after 0.475 s of relaxation (residual tension). The tensile and relaxation properties of wet webs were found to be strongly dependent on the quality and amount of fines. With low fines content, the tensile strength and residual tension of wet paper was mainly determined by the mechanical interactions between fibres at their contact points. As the fines strengthen the mechanical interaction in the network, the fibre properties also become important. Fibre deformations caused by the mechanical treatment of pulp were shown to reduce the mechanical properties of both dry and wet paper. However, the effect was significantly higher for wet paper. An increase of filler content from 10% to 25% greatly reduced the tensile strength of dry paper, but did not significantly impair wet web tensile strength or residual tension. Increased filler content in wet web was shown to increase the dryness of the wet web after the press section, which partly compensates for the reduction of fibrous material in the web. It is also presumable that fillers increase entanglement friction between fibres, which is beneficial for wet web strength. Different contaminants present in white water during sheet formation resulted in lowered surface tension and increased dryness after wet pressing. The addition of different contaminants reduced the tensile strength of the dry paper. The reduction of dry paper tensile strength could not be explained by the reduced surface tension, but rather on the tendency of different contaminants to interfere with the inter-fibre bonding. Additionally, wet web strength was not affected by the changes in the surface tension of white water or possible changes in the hydrophilicity of fibres caused by the addition of different contaminants. The spraying of different polymers on wet paper before wet pressing had a significant effect on both dry and wet web tensile strength, whereas wet web elastic modulus and residual tension were basically not affected. We suggest that the increase of dry and wet paper strength could be affected by the molecular level interactions between these chemicals and fibres. The most significant increases in dry and wet paper strength were achieved with a dual application of anionic and cationic polymers. Furthermore, selectively adding papermaking chemicals to different fibre fractions (as opposed to adding chemicals to the whole pulp) improved the wet web mechanical properties and the drainage of the pulp suspension.

Experience with an internet-based course for ophthalmology residents

OBJECTIVE: To describe the first experience of an Internet-based course for ophthalmology residents. METHOD: Twenty-three residents were invited to participate in the study; however, only 13 (56.52%) took part, performing the proposed activities and answering a questionnaire. RESULTS: Of the 13 participants, only five (38.46%) completed 100% of the tasks, three (23.07%) completed between 70 and 90%, two (15.38%) completed between 50 and 60% and three (23.07%) completed less than 10% of the tasks. Regarding the use of computers and the Internet in general, all the participants reported using the Internet daily. All of them also affirmed they use the internet to study or to conduct research. CONCLUSION: Despite the advantages of the Internet, medical residents are still very reluctant to its use. Considering the context of information and communication technologies, there is a pressing need to reformulate continuing medical education in order to meet the demand of this new developing world.

Enhancement of water removal in the press section

The effectiveness of water removal on press section is very important for a paper and board machine’s functioning, efficiency and economy. Today, the most effective method for wet pressing is shoe press technology. Metso has carried out a number of studies concerning anew type of water removal method for a press section, which has also been patented. These studies include rough sketches and some test runs. These issues form the basis of this thesis. The objective of this work was to gather together information for a new and enhanced waterremoval method for a press section by studying the functioning of the device andcarrying out test runs. This method is referred to here as Hydronip. The main goal was tobuild a functional test site which fulfills all the necessary requirements and has all thenecessary information gathering devices. The design process was carried out by emphasizing the safety aspects. The goal was also to gather together information about the nip structure in running conditions, the seal function, and to carry out the nip tests with paper or board wads. This thesis consists of a theory part, the design and construction of the test site, and carrying out test runs through information gathering. The theory part consists of the principals of water removal from a press section, Hydronip construction, and the requirements for the test place. The safety aspects were taken into account especially in test runs, but also in the assembly stages. The design and construction of the test site includes the selection of equipment and surroundings that are needed for managing the test runs in the best possible way at certain premises. The test site included the equipment that was already on the premises. Some equipment could be used as it was but some equipment had to be manufactured or modified from existing equipment. A functional test site with information gathering devices was accomplished as a result of thethesis. Test runs demonstrated that the Hydronip concept is, at least on a small scale,functional. Short-term tests for seal functioning showed that the seal can be lubricatedsufficiently under different kinds of nip load situations. Wad tests demonstrated that the metal belt is durable against different sizes of external particles. The seal also endured wad tests even though the pressure impacts impaired the lubrication. MTS tests showing dry content increases, combined with a rough cost calculation and the basic function of the machine in test runs, show that with some further study Hydronip could be a promising new product for water removal from a paper or board machine’s press section.

Optimization of the refining and shoe press in board production

Optimointi on tavallinen toimenpide esimerkiksi prosessin muuttamisen tai uusimisen jälkeen. Optimoinnilla pyritään etsimään vaikkapa tiettyjen laatuominaisuuksien kannalta paras tapa ajaa prosessia tai erinäisiä prosessin osia. Tämän työn tarkoituksena oli investoinnin jälkeen optimoida neljä muuttujaa, erään runkoon menevän massan jauhatus ja määrä, märkäpuristus sekä spray –tärkin määrä, kolmen laatuominaisuuden, palstautumislujuuden, geometrisen taivutusjäykkyyden ja sileyden, suhteen. Työtä varten tehtiin viisi tehdasmittakaavaista koeajoa. Ensimmäisessä koeajossa oli tarkoitus lisätä vettä tai spray –tärkkiä kolmikerroskartongin toiseen kerrosten rajapintaan, toisessa koeajossa muutettiin, jo aiemmin mainitun runkoon menevän massan jauhatusta ja jauhinkombinaatioita. Ensimmäisessä koeajossa tutkittiin palstautumislujuuden, toisessa koeajossa muiden lujuusominaisuuksien kehittymistä. Kolmannessa koeajossa tutkittiin erään runkoon menevän massan jauhatuksen ja määrän sekä kenkäpuristimen viivapaineen muutoksen vaikutusta palstautumislujuuteen, geometriseen taivutusjäykkyyteen sekä sileyteen. Neljännessä koeajossa yritettiin toistaa edellisen koeajon paras piste ja parametreja hieman muuttamalla saada aikaan vieläkin paremmat laatuominaisuudet. Myös tässä kokeessa tutkittiin muuttujien vaikutusta palstautumislujuuteen, geometriseen taivutusjäykkyyteen ja sileyteen. Viimeisen kokeen tarkoituksena oli tutkia samaisen runkoon menevän massan vähentämisen vaikutusta palstautumislujuuteen. Erinäisistä vastoinkäymisistä johtuen, koeajoista saadut tulokset jäivät melko laihoiksi. Kokeista kävi kuitenkin ilmi, että lujuusominaisuudet eivät parantuneet, vaikka jauhatusta jatkettiin. Lujuusominaisuuksien kehittymisen kannalta turha jauhatus pystyttiin siis jättämään pois ja näin säästämään energiaa sekä säästymään pitkälle viedyn jauhatuksen mahdollisesti aiheuttamilta muilta ongelmilta. Vähemmällä jauhatuksella ominaissärmäkuorma saatiin myös pidettyä alle tehtaalla halutun tason. Puuttuvat lujuusominaisuudet täytyy saavuttaa muilla keinoin.

Erikoispuristimen kehitys liikkuvalle raaka-ainerainalle

Tutkimuksen tavoitteena oli kehittää Lappeenrannan teknilliselle yliopistolle nopeasti ja ketterästi liikkuva, lävistyksiä ja muovauksia tekevä puristin. Laitteisto on tarkoitus liittää osaksi tuotantolinjaa, jossa suulakepuristin eli ekstruuderi tuottaa pehmeä, ei-metallista materiaalia katkeamattomasti. Teoriaosuudessa esitellään vaihtoehdot puristimen, ohjauksen, työkalun ja liikutuslaitteiston osalta. Empiriaosuudessa suoritetaan laitteiston eri komponenttien valinta hinnan, nopeuden, kestävyyden, käytettävyyden ja koon perusteella. Tutkimuksen lopussa arvioidaan laitteistokokonaisuuden nopeutta suulakepuristimen tuotaman materiaalin maksiminopeuteen. Laitteiston nopeuden rajoittavana tekijänä toimii puristimen iskunopeus, jonka perusteella suulakepuristimen tuottaman materiaalin etenemisnopeus joudutaan pudottamaan hieman alle puoleen tavoitteena olleesta nopeudesta. Laitteiston kestävyyden heikon kohta on työstöä tekevien komponenttien liikuttamiseen tarkoitettu laitteisto. Puristuslaitteistoa on tarkoitus käyttää kahdeksan tuntia päivässä, viitenä päivänä viikossa, 52 viikkoa vuodessa. Näiden käyttötietojen perusteella koko laitteiston käyttöikä on useita vuosia.

Impact of irrigation on yield and energy balance of the production of oil and cake of two sunflower varieties

The energy balance for the production of sunflower oil and cake was carried out during the agricultural and industrial stage phase, where it was considered a cold extraction by hydraulic pressing, with the plant location in a rural area with a radius of 30km range. Data on productivity was used in two varieties of sunflower (Helio 358 and Aguará 04) grown in different seasons (2007/2008, 2008/2009), under different irrigation levels. Data showed that irrigation resulted in an increase in productivity of both varieties, and the best response was observed for Aguará 04 variety. Moreover, the increased intensity of irrigation negatively affected the energy balance, reducing the ratio between energy produced and energy used in the production chain. The most significant inputs in the energy intake were fertilizer followed by diesel oil, when irrigation was not used for. When the irrigation technique was used, the most significant inputs, in order of representativeness, were: energy, fertilizer and equipment.

Promoting peace and security in Africa : is the European Union up to the challenge?

The ninth annual Suomenlinna seminar, organised by the Department of Strategic and Defence Studies, Finnish National Defence College, was held in May 2006. It brought together a representative group of specialists in security studies for two days of presentations and discussion about the most pressing issues of today – the challenges facing European Union’s crisis management in Africa.

The principle of autonomy in Brazil: one needs to discuss it ...

The principle of patient autonomy is a cornerstone of bioethics. According to this concept, patients should be given the power to make decisions related to their treatment. It is an important component of modern medical ethics, which has received much interest in current literature. However, the rate of participation of patients and their willingness to participate are variable according to the cultural, social and family environments in which they are inserted. The aim of this paper is to promote a brief descriptive review on autonomy, the preferences of patients and the use of informed consent as an instrument for the exercise of autonomy in literature, and to stress the lack of debate, as well as the pressing need for discussion of these current issues nationwide.

Senecio spp. POISONING OF HORSES IN SOUTHERN BRAZIL

Cases of seneciosis in horses occurring in four farms in the state of Santa Catarina and in another in the state of Rio Grande do Sul, southern Brazil, are reported. S. brasiliensis or S. oxyphyllus or both were detected in four of the five properties. Five horses (one on each property) were necropsied, and tissues for histopathological examination were collected from four horses. Neurological signs, such as depression, ataxia, aimeless walking, circling, head pressing, faulty prehension of food, dysphagia and blindness were consistently observed. Other signs included inappetence, loss of weight, colic, subcutaneous edema, icterus and photodermatitis. At necropsy the livers were firmer and darker than normal and had accentuation of lobular pattern. Edema of the mesentery and ascites were observed in one horse. Main histopathological changes consisted of hepatic chiefly periportal fibrosis, hepatomegalocytosis and biliary hyperplasia. Marked cholestasis and morphological evidence of hepatic encephalopathy were seen respectively in the liver and brain of one of the horses.

Puristussylinterien valmistuksen kehittäminen

Tässä diplomityössä kehitettiin yksitoimisten puristussylinterien valmistusta Rautessa. Sylinterien valmistuksessa haastavin vaihe on sylinteriputken ja pohjan välinen hitsaus. Hitsauksen avuksi suunniteltiin sylinterin sisäpuolinen juuritukilaite. Hitsauskokeita suoritettiin hitsin pohjan jauhekaarihitsaukselle ja MAG-hitsaukselle. Juuritukilaitteen toimivuutta testattiin koehitsauksilla. Puristussylinterien materiaali on S355J2-terästä, jonka ainevahvuus on 20 – 60 mm. Paksujen rakenneterästen hitsauksessa täytyy ottaa huomioon hitsausliitoksen mekaanisten ominaisuuksien muuttuminen sekä eri halkeamien synty. Hitsauksen laatuun ja laadunhallintaan voidaan vaikuttaa monien eri tekijöiden avulla. Hitsausohjeen avulla, ja muut laatutekijät huomioiden, voidaan hitseille asetetut laatukriteerit täyttää. Juurituen käyttö nopeuttaa puristussylinterien hitsausta vähintään 50 %. Jauhekaarihitsaus kuparista juuritukea vasten synnyttää vaikeasti poistettavan kuonan juuren puolelle. Perinteinen MAG-hitsaus kuparista juuritukea vasten sisältää liian monta muuttujaa, mikä tekee siitä epäluotettavan pohjapalon hitsaukseen. Työssä suunnitellun juuritukilaitteen käyttö tuotannossa vaatii lisää hitsauskokeita.