984 resultados para practical logic
Resumo:
One of the core values to be applied by a body reviewing the ethics of human research is justice. The inclusion of justice as a requirement in the ethical review of human research is relatively recent and its utility had been largely unexamined until debates arose about the conduct of international biomedical research in the late 1990s. The subsequent amendment of authoritative documents in ways that appeared to shift the meaning of conceptions of justice generated a deal of controversy. Another difficulty has been that both the theory and the substance of justice that are applied by researchers or reviewers can be frequently seen to be subjective. Both the concept of justice – whether distributive or commutative - and what counts as a just distribution or exchange – are given different weight and meanings by different people. In this paper, the origins and more recent debates about the requirement to consider justice as a criterion in the ethical review of human research are traced, relevant conceptions of justice are distinguished and the manner in which they can be applied meaningfully in the ethical review all human research is identified. The way that these concepts are articulated in, and the intent and function of, specific paragraphs of the National Statement on Ethical Conduct in Human Research (NHMRC, ARC, UA, 2007) (National Statement) is explained. The National Statement identifies a number of issues that should be considered when a human research ethics committee is reviewing the justice aspects of an application. It also provides guidance to researchers as to how they can show that there is a fair distribution of burdens and benefits in the participant experience and the research outcomes. It also provides practical guidance to researchers on how to think through issues of justice so that they can demonstrate that the design of their research projects meets this ethical requirement is also provided
Resumo:
Introduction The consistency of measuring small field output factors is greatly increased by reporting the measured dosimetric field size of each factor, as opposed to simply stating the nominal field size [1] and therefore requires the measurement of cross-axis profiles in a water tank. However, this makes output factor measurements time consuming. This project establishes at which field size the accuracy of output factors are not affected by the use of potentially inaccurate nominal field sizes, which we believe establishes a practical working definition of a ‘small’ field. The physical components of the radiation beam that contribute to the rapid change in output factor at small field sizes are examined in detail. The physical interaction that dominates the cause of the rapid dose reduction is quantified, and leads to the establishment of a theoretical definition of a ‘small’ field. Methods Current recommendations suggest that radiation collimation systems and isocentre defining lasers should both be calibrated to permit a maximum positioning uncertainty of 1 mm [2]. The proposed practical definition for small field sizes is as follows: if the output factor changes by ±1.0 % given a change in either field size or detector position of up to ±1 mm then the field should be considered small. Monte Carlo modelling was used to simulate output factors of a 6 MV photon beam for square fields with side lengths from 4.0 to 20.0 mm in 1.0 mm increments. The dose was scored to a 0.5 mm wide and 2.0 mm deep cylindrical volume of water within a cubic water phantom, at a depth of 5 cm and SSD of 95 cm. The maximum difference due to a collimator error of ±1 mm was found by comparing the output factors of adjacent field sizes. The output factor simulations were repeated 1 mm off-axis to quantify the effect of detector misalignment. Further simulations separated the total output factor into collimator scatter factor and phantom scatter factor. The collimator scatter factor was further separated into primary source occlusion effects and ‘traditional’ effects (a combination of flattening filter and jaw scatter etc.). The phantom scatter was separated in photon scatter and electronic disequilibrium. Each of these factors was plotted as a function of field size in order to quantify how each affected the change in small field size. Results The use of our practical definition resulted in field sizes of 15 mm or less being characterised as ‘small’. The change in field size had a greater effect than that of detector misalignment. For field sizes of 12 mm or less, electronic disequilibrium was found to cause the largest change in dose to the central axis (d = 5 cm). Source occlusion also caused a large change in output factor for field sizes less than 8 mm. Discussion and conclusions The measurement of cross-axis profiles are only required for output factor measurements for field sizes of 15 mm or less (for a 6 MV beam on Varian iX linear accelerator). This is expected to be dependent on linear accelerator spot size and photon energy. While some electronic disequilibrium was shown to occur at field sizes as large as 30 mm (the ‘traditional’ definition of small field [3]), it has been shown that it does not cause a greater change than photon scatter until a field size of 12 mm, at which point it becomes by far the most dominant effect.
Resumo:
In order to continue to maintain public trust and confidence in human research, participants must be treated with respect. Researchers and Human Research Ethics Committee members need to be aware that modern considerations of this value include: the need for a valid consenting process, the protection of participants who have their capacity for consent compromised; the promotion of dignity for participants; and the effects that human research may have on cultures and communities. This paper explains the prominence of respect as a value when considering the ethics of human research and provides practical advice for both researchers and Human Research Ethics Committee members in developing respectful research practices.
Resumo:
I am interested in the psychology of entrepreneurship—how entrepreneurs think, decide to act, and feel. I recently realized that while my publications in academic journals have implications for entrepreneurs, those implications have remained relatively hidden in the text of the articles and hidden in articles published in journals largely inaccessible to those involved in the entrepreneurial process. This book is designed to bring the practical implications of my research to the forefront. I decided to take a different approach with this book and not write it for a publisher. I did this because I wanted the ideas to be freely available: (1) I wanted those interested in practical advice for entrepreneurs to be able to freely download, distribute, and use this information (I only ask that the content be properly cited), (2) I wanted to release the chapters independently and make chapters available as they are finished, and; (3) I wanted this work to be a dialogue rather than a one-way conversation—I hope readers email me feedback (positive and negative) so that I can use this information to revise the book. In producing the journal articles underpinning this book, I have had the pleasure of working with many talented and wonderful colleagues—they are cited at the end of each chapter. I hope you find some of the advice in this book useful.
Resumo:
Plasma Nanoscience is a multidisciplinary research field which aims to elucidate the specific roles, purposes, and benefits of the ionized gas environment in assembling and processing nanoscale objects in natural, laboratory and technological situations. Compared to neutral gas-based routes, in low-temperature weakly-ionized plasmas there is another level of complexity related to the necessity of creating and sustaining a suitable degree of ionization and a much larger number of species generated in the gas phase. The thinner the nanotubes, the stronger is the quantum confinement of electrons and more unique size-dependent quantum effects can emerge. Furthermore, due to a very high mobility of electrons, the surfaces are at a negative potential compared to the plasma bulk. Therefore, there are non-uniform electric fields within the plasma sheath. The electric field lines start in the plasma bulk and converge to the sharp tips of the developing one-dimensional nanostructures.
Resumo:
These lecture notes highlight some of the recent applications of multi-objective and multidisciplinary design optimisation in aeronautical design using the framework and methodology described in References 8, 23, 24 and in Part 1 and 2 of the notes. A summary of the methodology is described and the treatment of uncertainties in flight conditions parameters by the HAPEAs software and game strategies is introduced. Several test cases dealing with detailed design and computed with the software are presented and results discussed in section 4 of these notes.
Resumo:
The applications of organic semiconductors in complex circuitry such as printed CMOS-like logic circuits demand miniaturization of the active structures to the submicrometric and nanoscale level while enhancing or at least preserving the charge transport properties upon processing. Here, we addressed this issue by using a wet lithographic technique, which exploits and enhances the molecular order in polymers by spatial confinement, to fabricate ambipolar organic field effect transistors and inverter circuits based on nanostructured single component ambipolar polymeric semiconductor. In our devices, the current flows through a precisely defined array of nanostripes made of a highly ordered diketopyrrolopyrrole-benzothiadiazole copolymer with high charge carrier mobility (1.45 cm2 V-1 s-1 for electrons and 0.70 cm2 V-1 s-1 for holes). Finally, we demonstrated the functionality of the ambipolar nanostripe transistors by assembling them into an inverter circuit that exhibits a gain (105) comparable to inverters based on single crystal semiconductors.
Resumo:
A method for calculating visual odometry for ground vehicles with car-like kinematic motion constraints similar to Ackerman's steering model is presented. By taking advantage of this non-holonomic driving constraint we show a simple and practical solution to the odometry calculation by clever placement of a single camera. The method has been implemented successfully on a large industrial forklift and a Toyota Prado SUV. Results from our industrial test site is presented demonstrating the applicability of this method as a replacement for wheel encoder-based odometry for these vehicles.
Resumo:
The jurisdiction of Australian courts to make wills for those lacking testamentary capacity is relatively new, having been granted by legislation progressively enacted across the various states and territories between 1996 and 2010. Given increasing numbers of statutory will applications since the legislative reform, and a growing body of law, the publication of the specialist work, Statutory Will Applications: A Practical Guide, by Richard Williams and Sam McCullough, is timely and valuable. This work will be of great interest to those who act for individual clients, especially wills and estates practitioners, but also personal injury practitioners acting for incapacitated persons who have been awarded substantial damages.
Resumo:
Although UK courts have, for many years, had power to make wills for those lacking testamentary capacity, this jurisdiction jurisdiction is relatively new in Australia, having been granted by legislation enacted between 1996 and 2010.
Resumo:
What is ‘best practice’ when it comes to managing intellectual property rights in participatory media content? As commercial media and entertainment business models have increasingly come to rely upon the networked productivity of end-users (Banks and Humphreys 2008) this question has been framed as a problem of creative labour made all the more precarious by changing employment patterns and work cultures of knowledge-intensive societies and globalising economies (Banks, Gill and Taylor 2014). This paper considers how the problems of ownership are addressed in non-commercial, community-based arts and media contexts. Problems of labour are also manifest in these contexts (for example, reliance on volunteer labour and uncertain economic reward for creative excellence). Nonetheless, managing intellectual property rights in collaborative creative works that are created in community media and arts contexts is no less challenging or complex than in commercial contexts. This paper takes as its focus a particular participatory media practice known as ‘digital storytelling’. The digital storytelling method, formalised by the Centre for Digital Storytelling (CDS) from the mid-1990s, has been internationally adopted and adapted for use in an open-ended variety of community arts, education, health and allied services settings (Hartley and McWilliam 2009; Lambert 2013; Lundby 2008; Thumin 2012). It provides a useful point of departure for thinking about a range of collaborative media production practices that seek to address participation ‘gaps’ (Jenkins 2006). However the outputs of these activities, including digital stories, cannot be fully understood or accurately described as user-generated content. For this reason, digital storytelling is taken here to belong to a category of participatory media activity that has been described as ‘co-creative’ media (Spurgeon 2013) in order to improve understanding of the conditions of mediated and mediatized participation (Couldry 2008). This paper reports on a survey of the actual copyrighting practices of cultural institutions and community-based media arts practitioners that work with digital storytelling and similar participatory content creation methods. This survey finds that although there is a preference for Creative Commons licensing a great variety of approaches are taken to managing intellectual property rights in co-creative media. These range from the use of Creative Commons licences (for example, Lambert 2013, p.193) to retention of full copyrights by storytellers, to retention of certain rights by facilitating organisations (for example, broadcast rights by community radio stations and public service broadcasters), and a range of other shared rights arrangements between professional creative practitioners, the individual storytellers and communities with which they collaborate, media outlets, exhibitors and funders. This paper also considers how aesthetic and ethical considerations shape responses to questions of intellectual property rights in community media arts contexts. For example, embedded in the CDS digital storytelling method is ‘a critique of power and the numerous ways that rank is unconsciously expressed in engagements between classes, races and gender’ (Lambert 117). The CDS method privileges the interests of the storyteller and, through a transformative workshop process, aims to generate original individual stories that, in turn, reflect self-awareness of ‘how much the way we live is scripted by history, by social and cultural norms, by our own unique journey through a contradictory, and at times hostile, world’ (Lambert 118). Such a critical approach is characteristic of co-creative media practices. It extends to a heightened awareness of the risks of ‘story theft’ and the challenges of ownership and informs ideas of ‘best practice’ amongst creative practitioners, teaching artists and community media producers, along with commitments to achieving equitable solutions for all participants in co-creative media practice (for example, Lyons-Reid and Kuddell nd.). Yet, there is surprisingly little written about the challenges of managing intellectual property produced in co-creative media activities. A dialogic sense of ownership in stories has been identified as an indicator of successful digital storytelling practice (Hayes and Matusov 2005) and is helpful to grounding the more abstract claims of empowerment for social participation that are associated with co-creative methods. Contrary to the ‘change from below’ philosophy that underpins much thinking about co-creative media, however, discussions of intellectual property usually focus on how methods such as digital storytelling contribute to the formation of copyright law-compliant subjects, particularly when used in educational settings (for example, Ohler nd.). This also exposes the reliance of co-creative methods on the creative assets storytellers (rather than on the copyrighted materials of the media cultures of storytellers) as a pragmatic response to the constraints that intellectual property right laws impose on the entire category of participatory media. At the level of practical politics, it also becomes apparent that co-creative media practitioners and storytellers located in copyright jurisdictions governed by ‘fair use’ principles have much greater creative flexibility than those located in jurisdictions governed by ‘fair dealing’ principles.
Resumo:
With the introduction of the Personally Controlled Health Record (PCEHR), the Australian public is being asked to accept greater responsibility for their healthcare. Although well designed, constructed and intentioned, policy and privacy concerns have resulted in an eHealth model that may impact future health information sharing requirements. Thus an opportunity to transform the beleaguered Australian PCEHR into a sustainable on-demand technology consumption model for patient safety must be explored further. Moreover, the current clerical focus of healthcare practitioners must be renegotiated to establish a shared knowledge creation landscape of action for safer patient interventions. To achieve this potential however requires a platform that will facilitate efficient and trusted unification of all health information available in real-time across the continuum of care. As a conceptual paper, the goal of the authors is to deliver insights into the antecedents of usage influencing superior patient outcomes within an eHealth-as-a-Service framework. To achieve this, the paper attempts to distil key concepts and identify common themes drawn from a preliminary literature review of eHealth and cloud computing concepts, specifically cloud service orchestration to establish a conceptual framework and a research agenda. Initial findings support the authors’ view that an eHealth-as-a-Service (eHaaS) construct will serve as a disruptive paradigm shift in the aggregation and transformation of health information for use as real-world knowledge in patient care scenarios. Moreover, the strategic value of extending the community Health Record Bank (HRB) model lies in the ability to automatically draw on a multitude of relevant data repositories and sources to create a single source of practice based evidence and to engage market forces to create financial sustainability.
Resumo:
The global grown in institutional investors means that firms can no longer ignore their influence in capital markets. However, not all institutional investors have the same motives to influence the firms they invest in. Institution investors' ability to influence management depends on the size of their investment and whether they have any business relations with the firm. Using a sample of Australian firms from 2006 to 2008, our empirical results show that the proportion of a company's shares held by institutional investors is positively associated with firm governance ratings, risk and profitability. This study shows that a positive association between risk and return is associated with large active institutional ownership, which we interpret as shareholders with sufficient power to pressure management to increase short-term profits.