Experimental investigation of post-fire mechanical properties of cold-formed steels

Cold-formed steel members are widely used in residential, industrial and commercial buildings as primary load-bearing elements. During fire events, they will be exposed to elevated temperatures. If the general appearance of the structure is satisfactory after a fire event then the question that has to be answered is how the load bearing capacity of cold-formed steel members in these buildings has been affected. Hence after such fire events there is a need to evaluate the residual strength of these members. However, the post-fire behaviour of cold-formed steel members has not been investigated in the past. This means conservative decisions are likely to be made in relation to fire exposed cold-formed steel buildings. Therefore an experimental study was undertaken to investigate the post-fire mechanical properties of cold-formed steels. Tensile coupons taken from cold-formed steel sheets of three different steel grades and thicknesses were exposed to different elevated temperatures up to 800 oC, and were then allowed to cool down to ambient temperature before they were tested to failure. Tensile coupon tests were conducted to obtain their post-fire stress-strain curves and associated mechanical properties (yield stress, Young’s modulus, ultimate strength and ductility). It was found that the post-fire mechanical properties of cold-formed steels are reduced below the original ambient temperature mechanical properties if they had been exposed to temperatures exceeding 300 oC. Hence a new set of equations is proposed to predict the post-fire mechanical properties of cold-formed steels. Such post-fire mechanical property assessments allow structural and fire engineers to make an accurate prediction of the safety of fire exposed cold-formed steel buildings. This paper presents the details of this experimental study and the results of post-fire mechanical properties of cold-formed steels. It also includes the results of a post-fire evaluation of cold-formed steel walls.

Post-fire mechanical properties of cold-formed steels

Cold-formed steel members have been widely used in residential, industrial and commercial buildings as primary load-bearing and non-load bearing structural elements. These buildings must be properly evaluated after a fire event to assess the nature and extent of structural damage. If the general appearance of the structure is satisfactory after a fire event then the question that has to be answered is how the structural capacity of cold-formed steel members in these buildings has been affected. Elevated temperatures during a fire event affect the structural performance of cold-formed steel members even after cooling down to ambient temperature due to the possible detrimental changes in their mechanical properties. However, the post-fire behaviour of cold-formed steel members has not been investigated in the past and hence there is a need to investigate the post-fire mechanical properties of cold-formed steels. Therefore an experimental study was undertaken at the Queensland University of Technology to understand the residual mechanical properties of cold-formed steels after fire events. Tensile coupon tests were conducted on three different steel grades and thicknesses to obtain their stress-strain curves and relevant mechanical properties after cooling them down from different elevated temperatures. It was found that the post-fire mechanical properties of cold-formed steels are different to the original ambient temperature mechanical properties. Hence a new set of equations is proposed to predict the reduced mechanical properties of cold-formed steels after a fire event.

Post-deposition ageing reactions of plasma derived polyterpenol thin films

Owing to the structural flexibility, uncomplicated processing and manufacturing capabilities, plasma polymers are the subject of active academic as well as industrial research. Polymer thin films prepared from non-synthetic monomers combine desirable optical and physical properties with biocompatibility and environmental sustainability. However, the ultimate expediency and implementation of such materials will dependent on the stability of these properties under varied environmental conditions. Polyterpenol thin films were manufactured at different deposition powers. Under ambient conditions, the bulk of ageing occurred within first 150h after deposition and was attributed to oxidation and volumetric relaxation. Films observed for further 12 months showed no significant changes in thickness or refractive index. Thermal degradation behaviour indicated thermal stability increased for the films manufactured at higher RF powers. Annealing the films to 405°C resulted in full degradation, with retention between 0.29 and 0.99%, indicating films' potential as sacrificial material.

Cisticercosis Bovina, en matadero industrial Nuevo Carnic S.A.

Con el objeto de evaluar la presencia de cisticercosis en su estado quístico larvario en músculos de reses faenadas en el Matadero Industrial Nuevo Carnic S.A; ubicado en el km 10 carretera norte, un km al norte. Realizamos el presente estudio, cuyos datos recopilados se obtuvieron de los registros de matanza de marzo a agosto 2014, los cuales provenían de los registros de inspección post mortem realizados por los inspectores veterinarios. La metodología se basó en la elaboración de un perfil de cada una de las canales de reses identificadas con la presencia de cisticercos y se determinó según la cantidad encontrada de quistes, si serían retenidas o decomisadas. Se determinó la prevalencia de animales afectados, los que se relacionaron con el número de animales faenados por lotes y total, logrando de esta manera identificar la procedencia de los lotes a los que se le diagnosticó la presencia de cisticercosis. Se valoró las pérdidas económicas que esta patología ocasiona a los productores. El estudio tuvo un alcance de 31.37% de los municipios del país, se faenaron 67,423 animales, 258 se trataron por cisticercosis bovina para una prevalencia de 0.38% y se obtuvieron 13 condenas representando una prevalencia de 0.02%. Lo que nos indicó que después de seis años, en comparación con el estudio que llevaron a cabo Pérez y Serrano en el mismo Matadero en el año 2008, la presencia de cisticercosis se ha reducido hasta un 0.45%. La categoría con mayor prevalencia de C. bovis fue la categoría macho representando un 58.67% con respecto a la hembra que se obtuvo un 36.53%, esto se debe que la categoría macho son los animales que se entregan con mayor frecuencia para el sacrificio, y destinados para el engorde. El municipio que presentó mayor frecuencia de animales afectados fue Managua, seguido de Matiguas, Waslala, Bocay, Santo Domingo, Paiwas, San Ramón, Nagarote, Rancho Grande y Estelí; Managua no es un municipio con vocación ganadera, sobre todo de ganado de carne, por lo que se puede considerar como un lugar de acopio de ganado. Los meses que presentaron con mayor prevalencia de cisticercosis bovina fueron Marzo y Agosto, aunque se presentó en todos los meses del estudio, concluyendo que la enfermedad se encuentra durante todo el año y no depende de factores estacionales. Las pérdidas económicas para los productores fueron de $30,162.79 entre animales retenidos y condenados

Carbon-carbon bond forming reactions from bis(carbene)-platinum(II) complexes and olefin polymerization and oligomerization using group 4 post-metallocene complexes

A long-standing challenge in transition metal catalysis is selective C–C bond coupling of simple feedstocks, such as carbon monoxide, ethylene or propylene, to yield value-added products. This work describes efforts toward selective C–C bond formation using early- and late-transition metals, which may have important implications for the production of fuels and plastics, as well as many other commodity chemicals.

The industrial Fischer-Tropsch (F-T) process converts synthesis gas (syngas, a mixture of CO + H₂) into a complex mixture of hydrocarbons and oxygenates. Well-defined homogeneous catalysts for F-T may provide greater product selectivity for fuel-range liquid hydrocarbons compared to traditional heterogeneous catalysts. The first part of this work involved the preparation of late-transition metal complexes for use in syngas conversion. We investigated C–C bond forming reactions via carbene coupling using bis(carbene)platinum(II) compounds, which are models for putative metal–carbene intermediates in F-T chemistry. It was found that C–C bond formation could be induced by either (1) chemical reduction of or (2) exogenous phosphine coordination to the platinum(II) starting complexes. These two mild methods afforded different products, constitutional isomers, suggesting that at least two different mechanisms are possible for C–C bond formation from carbene intermediates. These results are encouraging for the development of a multicomponent homogeneous catalysis system for the generation of higher hydrocarbons.

A second avenue of research focused on the design and synthesis of post-metallocene catalysts for olefin polymerization. The polymerization chemistry of a new class of group 4 complexes supported by asymmetric anilide(pyridine)phenolate (NNO) pincer ligands was explored. Unlike typical early transition metal polymerization catalysts, NNO-ligated catalysts produce nearly regiorandom polypropylene, with as many as 30-40 mol % of insertions being 2,1-inserted (versus 1,2-inserted), compared to <1 mol % in most metallocene systems. A survey of model Ti polymerization catalysts suggests that catalyst modification pathways that could affect regioselectivity, such as C–H activation of the anilide ring, cleavage of the amine R-group, or monomer insertion into metal–ligand bonds are unlikely. A parallel investigation of a Ti–amido(pyridine)phenolate polymerization catalyst, which features a five- rather than a six-membered Ti–N chelate ring, but maintained a dianionic NNO motif, revealed that simply maintaining this motif was not enough to produce regioirregular polypropylene; in fact, these experiments seem to indicate that only an intact anilide(pyridine)phenolate ligated-complex will lead to regioirregular polypropylene. As yet, the underlying causes for the unique regioselectivity of anilide(pyridine)phenolate polymerization catalysts remains unknown. Further exploration of NNO-ligated polymerization catalysts could lead to the controlled synthesis of new types of polymer architectures.

Finally, we investigated the reactivity of a known Ti–phenoxy(imine) (Ti-FI) catalyst that has been shown to be very active for ethylene homotrimerization in an effort to upgrade simple feedstocks to liquid hydrocarbon fuels through co-oligomerization of heavy and light olefins. We demonstrated that the Ti-FI catalyst can homo-oligomerize 1-hexene to C₁₂ and C₁₈ alkenes through olefin dimerization and trimerization, respectively. Future work will include kinetic studies to determine monomer selectivity by investigating the relative rates of insertion of light olefins (e.g., ethylene) vs. higher α-olefins, as well as a more detailed mechanistic study of olefin trimerization. Our ultimate goal is to exploit this catalyst in a multi-catalyst system for conversion of simple alkenes into hydrocarbon fuels.

Carbon leakage and the future of Old Industrial Regions

4 p.

Carbon leakage and the future of Old Industrial Regions after Copenhagen

35 p.

Long-term natural acidification of upland sites in Cumbria: Evidence from post-glacial lake sediments

Studies by the Freshwater Biological Association over the last 25 years have supplied data relevant to the levels of acidity in local soils and water before the onset of industrial pollution and current interest in acid rain. This article reviews published analysis from cores of lake sediments, in or near the catchment of the River Duddon. Electron spin resonance spectra of humic acids and iodine values confirm evidence from pollen analysis for a history of progressive acidification of the source material of lake sediments since before 5000 radiocarbon years, in upland catchments of the Lake District. Processes involved included: removal of basic ions from soils by rainfall, the effects of which were intensified by removal by man of deciduous forest; acidification of soils and waters by decomposition products of Calluna and further acidification of waters by Sphagnum species which colonized habitats where drainage became impeded by paludification processes.

Analytical strategies to solve problems in industrial and official laboratories

210 p.

A case study on the impact of industrial effluent disposal on the fishery of Amba River estuary, Maharashtra

The impact of waste discharge on fishery resources is a matter of great concern. The accepted norm in all environmental impact assessment studies is to avoid areas of high fishery potential while locating a marine outfall. Contemplating on this aspect a case study was conducted in the Amba River estuary before and after the establishment of a petrochemical complex at Nagothane. The treated wastewater from this complex is released through a subsurface outfall after adopting effective control measures for marine disposal of waste. Experimental trawling was done at five locations covering a distance of 30 km during 1990 to 1991. The catch rate within the estuary varied from 0.6 to 255 kg/h (av 24 kg/h). The trend indicated considerable decrease in fishery potential from the mouth of the estuary (av 64 kg/h) to the upstream location (av 11 kg/h). A total of 49 species of fishes, 16 species of prawns, 7 species of crabs and 1 species of lobster were identified from the collections. Number of species gradually increased from the interior segment at Dharamtar (8) to the outer area near Revas (18). A comparison of the quantitative and qualitative nature of the post outfall and pre outfall data revealed only marginal difference. The study indicates that if necessary precautions are taken to render the waste harmless the marine ecology will hardly be affected.

NAFTA and the apparel commodity chain: Corporate strategies, interfirm networks, and industrial upgrading

The apparel industry is one of the oldest and largest export industries in the world, with global trade and production networks that connect firms and workers in countries at all levels of economic development. This chapter examines the impact of the North American Free Trade Agreement (NAFTA) as one of the most recent and significant developments to affect patterns of international trade and production in the apparel and textile industries. Tr ade policies are changing the institutional environment in which firms in this industry operate, and companies are responding to these changes with new strategies designed to increase their profitability and strengthen their control over the apparel commodity chain. Our hypothesis is that lead firms are establishing qualitatively different kinds of regional production networks in North America from those that existed prior to NAFTA, and that these networks have important consequences for industrial upgrading in the Mexican textile and apparel industries. Post-NAFTA crossborder production arrangements include full-package networks that link lead firms in the United States with apparel and textile manufacturers, contractors, and suppliers in Mexico. Full-package production is increasing the local value added provided by the apparel commodity chain in Mexico and creating new opportunities for Mexican firms and workers. The chapter is divided into four main sections. The first section uses trade and production data to analyze shifts in global apparel flows, highlighting the emergence and consolidation of a regional trade bloc in North America. The second section discusses the process of industrial upgrading in the apparel industry and introduces a distinction between assembly and full-package production networks. The third section includes case studies based on published industry sources and strategic interviews with several lead companies whose strategies are largely responsible for the shifting trade patterns and NAFTA-inspired cross-border production networks discussed in the previous section. The fourth section considers the implications of these changes for employment in the North American apparel industry. © 2009 by Temple University Press. All rights reserved.

El estrés térmico post - floración y sus efectos sobre el peso y la calidad de los granos en maíces de diferente destino de producción

En maíz, los golpes de calor (días con temperaturas menor a 35 grados C) ocurridos tempranamente durante el período post-floración pueden afectar negativamente el peso individual de los granos, a traves de limitaciones del crecimiento del cultivo. El conocimiento que existe respecto a las bases eco-fisiológicas de la respuesta de la calidad de los granos a la incidencia de este estres durante el llenado efectivo es prácticamente nulo. El objetivo de este trabajo fue analizar en condiciones a campo el impacto de los golpes de calor durante las etapas tempranas y tardías del llenado efectivo sobre el peso, la calidad general y específica de la industria de los granos en híbridos de maíz de diferente destino de producción (colorado duro o flint, pisingallo y semi-dentad). Los golpes de calor, especialmente aquellos ocurridos durante las etapas tempranas del llenado, redujeron el crecimiento de los cultivos por caídas de la eficiencia en el uso de la radiacion interceptada. Esto produjo un desbalance entre la disponibilidad de asimilados y el requerimiento de estos por parte de los granos que se tradujo en una interrupción prematura del llenado. Consecuentemente, se obtuvieron granos mas livianos con concentraciones mas bajas de aceite y mas altas de proteína. Estas respuestas fueron acompanadas de alteraciones en la composición específica de las proteínas de reserva, incrementándose la abundancia relativa de glutelinas, y ƒÀ- y ƒÁ- zeinas, en detrimento de aquella de ƒ¿-zeinas. Asimismo, los golpes de calor provocaron efectos negativos sobre los diversos parámetros de calidad industrial de los granos, asociados principalmente a disminuciones en la abundancia relativa de ƒ¿-zeínas. Para la mayoría de los rasgos mencionados, los híbridos semi-dentados tuvieron una respuesta mas pronunciada al estrés que los híbridos colorado duro y pisingallo, aparentando ser sensibles a temperaturas del aire incluso inferiores a 35 grados C.

El estrés térmico post - floración y sus efectos sobre el peso y la calidad de los granos en maíces de diferente destino de producción

En maíz, los golpes de calor (días con temperaturas menor a 35 grados C) ocurridos tempranamente durante el período post-floración pueden afectar negativamente el peso individual de los granos, a traves de limitaciones del crecimiento del cultivo. El conocimiento que existe respecto a las bases eco-fisiológicas de la respuesta de la calidad de los granos a la incidencia de este estres durante el llenado efectivo es prácticamente nulo. El objetivo de este trabajo fue analizar en condiciones a campo el impacto de los golpes de calor durante las etapas tempranas y tardías del llenado efectivo sobre el peso, la calidad general y específica de la industria de los granos en híbridos de maíz de diferente destino de producción (colorado duro o flint, pisingallo y semi-dentad). Los golpes de calor, especialmente aquellos ocurridos durante las etapas tempranas del llenado, redujeron el crecimiento de los cultivos por caídas de la eficiencia en el uso de la radiacion interceptada. Esto produjo un desbalance entre la disponibilidad de asimilados y el requerimiento de estos por parte de los granos que se tradujo en una interrupción prematura del llenado. Consecuentemente, se obtuvieron granos mas livianos con concentraciones mas bajas de aceite y mas altas de proteína. Estas respuestas fueron acompanadas de alteraciones en la composición específica de las proteínas de reserva, incrementándose la abundancia relativa de glutelinas, y ƒÀ- y ƒÁ- zeinas, en detrimento de aquella de ƒ¿-zeinas. Asimismo, los golpes de calor provocaron efectos negativos sobre los diversos parámetros de calidad industrial de los granos, asociados principalmente a disminuciones en la abundancia relativa de ƒ¿-zeínas. Para la mayoría de los rasgos mencionados, los híbridos semi-dentados tuvieron una respuesta mas pronunciada al estrés que los híbridos colorado duro y pisingallo, aparentando ser sensibles a temperaturas del aire incluso inferiores a 35 grados C.

Production of porous aluminium and iron sulphated oxyhydroxides using industrial grade coagulants for optimised arsenic removal from groundwater

The optimisation of Fe and Al oxyhydroxide materials produced using industrial grade coagulants is presented in this work. The effects of synthesis pH and post-synthesis washing procedure onto the arsenic adsorption capacity of the materials were investigated. It was shown that the materials produced at higher pH were more efficient in removing As(V), especially after cleaning procedure. The materials produced at lower pH were less efficient in removing As(V) but the higher presence of sulphate groups in the materials produced at lower pH enhanced As(III) adsorption. Most performing materials can remove up to 84.7 mg As(V) g^-1 or 77.9 mg As(III) g^-1.