XML-based information management environment for PE technologies

Printed electronics is an emerging concept in electronics manufacturing and it is in very early development stage. The technology is not stable, design kits are not developed, and flows and Computer Aided Design (CAD) tools are not fixed yet. The European project TDK4PE addresses all this issues and this PFC has been realized on this context. The goal is to develop an XML-based information system for the collection and management of information from the technology and cell libraries developed in TDK4PE. This system will ease the treatment of that information for a later generation of specific Design Kits (DK) and the corresponding documentation. This work proposes a web application to generate technology files and design kits in a formatted way; it also proposes a structure for them and a database implementation for storing the needed information. The application will allow its users to redefine the structure of those files, as well as export and import XML files, between other formats.

Effect of water velocity on the uptake of polychlorinatedd biphenyls (PCBs) by silicone rubber (SR) and low-density polyethylene (LDPE) passive samplers: an assessment of the efficiency of performance reference compounds (PRCs) in river-like flow conditions

One aim of this study is to determine the impact of water velocity on the uptake of indicator polychlorinated biphenyls (iPCBs) by silicone rubber (SR) and low-density polyethylene (LDPE) passive samplers. A second aim is to assess the efficiency of performance reference compounds (PRCs) to correct for the impact of water velocity. SR and LDPE samplers were spiked with 11 or 12 PRCs and exposed for 6 weeks to four different velocities (in the range of 1.6 to 37.7 cm s−1) in river-like flow conditions using a channel system supplied with river water. A relationship between velocity and the uptakewas found for each iPCB and enables to determine expected changes in the uptake due to velocity variations. For both samplers, velocity increases from 2 to 10 cm s−1, 30 cm s−1 (interpolated data) and 100 cm s−1 (extrapolated data) lead to increases of the uptake which do not exceed a factor of 2, 3 and 4.5, respectively. Results also showed that the influence of velocity decreased with increasing the octanol-water coefficient partition (log Kow) of iPCBs when SR is used whereas the opposite effect was observed for LDPE. Time-weighted average (TWA) concentrations of iPCBs in water were calculated from iPCB uptake and PRC release. These calculations were performed using either a single PRC or all the PRCs. The efficiency of PRCs to correct the impact of velocity was assessed by comparing the TWA concentrations obtained at the four tested velocities. For SR, a good agreement was found among the four TWA concentrations with both methods (average RSD b 10%). Also for LDPE, PRCs offered a good correction of the impact of water velocity (average RSD of about 10 to 20%). These results contribute to the process of acceptance of passive sampling in routine regulatory monitoring programs.

Alterações físicas e químicas durante o desenvolvimento de mangas 'Tommy Atkins' no vale de São Francisco, Petrolina-PE

O presente trabalho objetivou caracterizar o crescimento dos frutos de mangueira (Mangifera indica L.), cv. Tommy Atkins, da antese até a colheita comercial, visando à definição do ponto de colheita ideal baseado em determinações físicas e físico-químicas. Os frutos foram colhidos aos 35; 49; 63; 70; 77; 84; 98 e 112 dias após a antese (DAA), sendo feitas as seguintes determinações: diâmetro longitudinal, diâmetro ventral, diâmetro transversal, produto dos diâmetros, massa fresca, massa seca, massa e teor de água, escala de Blush para coloração da casca e sólidos solúveis. O trabalho indicou que as mangas atingiram a maturidade aos 98 DAA e que a massa seca, dentre os estudados, é o melhor indicador do estádio de desenvolvimento dos frutos.

Avaliação do padrão de visitação de Apis mellifera em três cultivares de meloeiro, em Petrolina-PE, Brasil

Para o cultivo do meloeiro, a presença de abelhas no período de florescimento é fundamental para garantir a polinização e incrementar a produção de frutos. Nesse sentido, o presente trabalho teve por finalidade verificar se há diferenças no comportamento de visitas e no recurso floral forrageado por Apis mellifera, em três cultivares de meloeiro. O trabalho foi desenvolvido no Campo Experimental da Embrapa Semiárido, em Petrolina-PE, com as cultivares do tipo amarelo (BRS Araguaia), pele-de-sapo (P-33) e cantaloupe (CAN-4), com observações da biologia floral, morfologia e comportamento de A. mellifera no período das 05h às 18h. O pico de visitação foi diferente, ocorrendo das 11h às 12h; 10h às 11h e das 15h às 16h para o tipo amarelo, cantaloupe e pele-de-sapo, respectivamente. Quanto ao recurso floral forrageado, a coleta de néctar foi constante ao longo do dia, enquanto a de pólen ocorreu principalmente no período da manhã. Quanto ao tipo floral, as flores hermafroditas receberam, de modo geral, mais visitas na cultivar do tipo amarelo e pele-de-sapo, sendo o inverso registrado para a do tipo cantaloupe. O maior número de visitas registrado nesse tipo floral pode ser atribuído às diferenças morfológicas, uma vez que suas flores são maiores e, portanto, poderiam ser mais atrativas.

Análise exploratória das características morfológicas e qualitativas de variedades de laranjeiras de mesa da coleção em brejão - PE

Este trabalho teve como objetivo avaliar as características morfológicas e os aspectos físicos, físico-químicos e químicos das plantas e dos frutos de 15 variedades de laranjas cedidas pelo Centro Nacional de Pesquisa de Mandioca e Fruticultura (Embrapa - CNPMF), e plantadas na Estação Experimental do Instituto Agronômico de Pernambuco, Brejão-PE. Foram avaliados: diâmetro do caule acima e abaixo da linha de enxertia e a relação entre eles, diâmetro da copa, altura da planta e volume de copa. Nos frutos, as avaliações consistiram em: formato, coloração do epicarpo, massa do fruto, massa do suco, altura e diâmetro do fruto, espessura do mesocarpo e do endocarpo, número de sementes por fruto e rendimento em suco. O delineamento experimental foi em blocos casualisados, com quatro repetições e uma planta por parcela. Para o aspecto qualitativo dos frutos, utilizou-se o mesmo delineamento, e foram avaliados através de 12 descritores. Apenas seis das variedades de laranjas estudadas estão dentro das exigências do Programa Brasileiro para a Modernização da Horticultura e cinco das variedades de laranjas mostraram-se com maturação diferente das descritas na literatura.

Crescimento e acúmulo de macronutrientes na cultura do melão em Baraúna - RN e Petrolina - PE

Com o objetivo de avaliar o crescimento e o acúmulo de nutrientes por híbridos de melão desenvolveram-se experimentos em área comercial no município de Baraúna-RN, e na estação experimental de Bebedouro (Petrolina-PE) da Embrapa Semiárido. Em Baraúna-RN, o experimento foi desenvolvido de setembro a novembro de 2010, e em Petrolina-PE, de agosto a outubro de 2010. O delineamento experimental foi em blocos casualizados completos, com quatro repetições, em esquema fatorial 2 x 5. Os tratamentos resultaram da combinação de dois híbridos de melão (Iracema e Gran Prix) e cinco épocas de coletas de plantas (15; 25; 35; 45 e 55 dias após o transplante, DAT). Para se fazer um programa de adubação na cultura do meloeiro, tanto do grupo Amarelo como do grupo Pele-de-Sapo, observou-se um crescimento lento no início, maior incremento da parte aérea de 35 a 45 DAT e maior exigência da planta para o estádio de frutificação de 35 a 45 DAT para 'Iracema' e 45 a 55 DAT para 'Gran Prix' Quanto ao acúmulo, para os dois materiais e nos dois locais, observou-se a seguinte ordem: K>N>P>Ca>Mg.

Migration of antimony from polyethylene terephthalate used in mineral water bottles.

The influence of storage time and temperature on Sb migration from PET bottles into mineral water was studied in short-term tests lasting up to 15 days and long-term studies lasting up to 220 days. Samples purchased were stored in three different coloured bottles: clear (CL), light blue (LB) and dark blue (DB). Sb migration was assayed by HG-AFS for total determination and HPLC-ICP-MS for speciation analysis. Migration studies showed that waters stored at 4 and 20 oC were not subject to Sb migration. At 40 oC there was a significant increase in Sb concentration, although the maximum limit established by the European Union (5.0 ug/L) was not exceeded, whereas at 60 oC samples were subject to considerable Sb migration after 30 days of storage. In this case, the maximum limit established by the European Union was exceeded and both Sb (V) and Sb (III) were detected.

ÉVALUATION DE LA PÉNIBILITÉ DE LA PRISE EN CHARGE DES PATIENTS SOUFFRANT DE TROUBLES PSYCHIQUES EN MILIEU PÉNITENTIAIRE

Contexte: Les Établissements de la Plaine de l'Orbe accueillent des patients souffrant de troubles psychiques sévères et incarcérés sous le coup d'une mesure pénale ou y purgeant une peine. Dans le cadre d'une étude des besoins, l'équipe du Service de Médecine et Psychiatrie Pénitentiaire (SMPP) souhaite développer un outil permettant d'évaluer la pénibilité de la prise en charge de ces patients difficiles. Il y a en effet dans ce contexte, une nécessité d'améliorer l'offre de soins qui est actuellement limitée. Ceci dans la perspective de l'ouverture en 2016 d'un Etablissement de Réinsertion Sécurisée (ERS) sur le site de Cery et de la création d'un Centre de Soins aux Etablissements de la Plaine de l'Orbe à l'horizon 2018. Objectifs: Déterminer les différents critères définissant la pénibilité Élaborer un outil pratique, facilement utilisable en clinique permettant d'évaluer la pénibilité d'un patient ou d'une cohorte L'outil devra avoir une utilité à un niveau individuel (meilleure représentation des problématiques d'un patient, évolutivité de la situation) ainsi que sur une cohorte de patients (aide à l'évaluation des ressources nécessaires ou à l'évaluation de la charge de travail pour une équipe)

Kaukojäähdytysverkon rakennevaihtoehdot

Kaukojäähdytyksellä tarkoitetaan keskitetysti tuotetun jäähdytysenergian jakamista kiinteistöihin jakeluverkossa kiertävän kylmän veden välityksellä, eli kaukojäähdytys on ulkoistettu jäähdytysratkaisu. Jäähdytysenergiaa tarvitaan työtehon, viihtyisyyden ja sisäilman laadun parantamiseksi, sekä joidenkin prosessien tarpeisiin. Siinä missä perinteinen kiinteistökohtainen jäähdytysjärjestelmä tuottaa jäähdytysenergian sähköllä, käytetään kaukojäähdytyksessä jäähdytysenergian tuottamiseen sellaisia resursseja, jotka muuten jäisivät käyttämättä. Tästä syystä kaukojäähdytys vähentää merkittävästi hiilidioksidipäästöjä, jonka lisäksi kaukojäähdytys vähentää kylmäkoneissa käytettävien kylmäaineiden aiheuttamia kasvihuonekaasupäästöjä. Kaukolämpöverkkoa muistuttavan kaukojäähdytysverkon rakentaminen vaatii suuria investointeja. Nykyisin jakeluverkon rakenteena käytetään 2Mpuk- rakennetta, jonka todettiin olevan teknistaloudellisesti soveltuvin vaihtoehto Helsingin Energian kaukojäähdytysverkkoon. Myös PE 100 putkia voitaisiin käyttää PN 16 paineluokassa alle DN 300 kokoluokkaa vastaavissa johdoissa, ja PN 10 paineluokassa alle DN 400 johdoissa. Kaukolämpöverkon paineluokan valinta vaikuttaa oleellisesti investointikustannuksiin PE- putkilla ja joillekin alueille kannattanee rakentaa alemman paineluokan omaava erillisverkko PE- putkista. Happidiffuusion kautta PE- putkista pääsee jonkin verran happea verkkoon, mutta määrät ovat melko pieniä, eikä muitakaan teknisiä esteitä hyvin korroosiota kestävien PE- putkien käytölle ole. 2Mpuk- rakenteelle suurimman riskin aiheuttaa elementtien liitoskohdista teräsputken pinnalle pääsevä ulkopuolinen vesi. Koska kaukojäähdytysjohdot ovat lisäksi yleensä ympäristöä kylmempiä, kondensoivat ne vettä pinnallensa kaukolämpöjohdoista poiketen. Ulkopuolisen veden aiheuttamaa riskiä voitaisiin pienentää eristämällä liitoskohdat sähkömuhveilla. Verkoston rakentamiskustannuksia ja liikenteelle aiheutuvia haittoja voidaan vähentää ojattomia rakentamismenetelmiä, kuten suuntaporausta käyttämällä.

Influência de poluentes atmosféricos em Belo Jardim (PE) utilizando Cladonia verticillaris (líquen) como biomonitor

Cladonia verticillaris used in this study was collected in the cerrado vegetation of Saloá (PE, Brazil) and transplanted in plastic containers on soil from the collection place to Belo Jardim (PE) that possesses lead smelters and battery industries. The experiments were disposed at eleven different places for evaluating the dispersion of pollutants and their effects on the biomonitor. The exposed lichens were collected over eight months and submitted to thin layer and high performance liquid chromatographies, and scanning electron microscopy. C. verticillaris placed in the vicinity of the emission sources demonstrated alteration in its metabolism, decreasing the production of its major compound, fumarprotocetraric acid, and deterioration of its external and internal surfaces.

Effect of the radiolitic sterilization in polyethylene/starch blends

Samples of LDPE/modified starch blends 80/20 m/m before and after exposure to gamma rays were examined by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction. The effect of gamma radiation is clearly seen in the samples irradiated at a dose of 25 kGy. The main alteration in the polymeric material after exposure at the radiation range was a decrease in the mechanical properties, alterations in the chemical structure of the blend with an increase in the carbonyl and vinyl indices and the appearance of new crystalline symmetry generating a crystalline domain not existing before in the blend.

Hidrólise parcial da superfície do polyethylene terephthalate (PET): transformando um rejeito em um material de troca catiônica para aplicação ambiental

In this work it is proposed a simple and versatile undergraduate chemical experiment in polymer and environmental technology based on the process of polyethylene terephthalate (PET) hydrolysis. Polyethylene terephthalate from post-consume bottles is submitted to a controlled partial hydrolysis which allows the students to follow the reaction by a simple procedure. The students can explore the reaction kinetics, the effect of catalysts and the exposed polyethylene terephthalate surface area on the hydrolysis reaction. The second and innovative part of this experiment is the technological and environmental application of the hydrolyzed polyethylene terephthalate as a material with cation exchange properties. The surface hydrolyzed polyethylene terephthalate can be used as adsorbent for cationic contaminants.

In situ synthesis of nanoclay filled polyethylene using polymer supported metallocene catalyst system

In situ ethylene polymerizations were performed using bis(cyclopentadiene)titanium dichloride supported on polyethersulfone as catalyst. The bis(cyclopentadiene)titanium dichloride supported on polyethersulfone catalyst activity estimated by ethylene polymerization was 360 kgPE/molTi/h. During polymerization the fillers used were montmorillionite nanoclays having surface modifications with 35-45 wt% dimethyl dialkyl(14-18)amine (FA) and 25-30 wt% trimethyl stearyl ammonium (FB). These fillers were pretreated with methylaluminoxine (MAO; cocatalyst) for better dispersion onto the polymer matrix. The formation of polyethylene within the whole matrix was confirmed by FTIR studies. It was found that the nature of nanofiller did not have any remarkable effect on the melting characteristics of the polymer. TGA study indicates that nanoclay FB filled polyethylene has higher thermal stability than nanoclay FA filled polyethylene. The melting temperature of the obtained polyethylenes was 142 ºC, which corresponds to that synthesized by the polyether sulfone supported catalyst.

Enhanced photocatalytic activity of TiO2 films by modification with polyethylene glycol

Titanium dioxide porous thin films on the Anatase phase were deposited onto glass slides by the sol-gel method assisted with polyethylene glycol (PEG). The dip-coated films were characterized using scanning electron microscopy (SEM), thermogravimetric analysis (TGA and DTG), UV-visible spectroscopy and X-ray diffraction (XRD). The photocatalytic activity of the films was determined by means of methyl-orange oxidation tests. The resultant PEG-modified films were crack-free and developed a porous structure after calcination at 500 °C. Photo-oxidation tests showed the dependency of catalytic activity of the films on the number of layers (thickness) and porosity, i.e. of the interfacial area.