El còmic. ' El cómic'.

Material elaborado en dos centros de Educación Primaria: CEIP Serra de la Marina (Santa Coloma de Gramanet, Barcelona) y CEIP Els Pins (Dosrius, Barcelona)

Libros para todos.

El proyecto pretende sensibilizar a los alumnos para que se aficionen, disfruten y aprendan con la lectura, y sean capaces de buscar a través de Internet los mejores libros. Los objetivos son corregir prejuicios; utilizar las nuevas tecnologías para aprender a seleccionar libros; ampliar el vocabulario, la comprensión y la expresión oral y escrita; conocer los mejores libros de literatura infantil de autores europeos; y aumentar la velocidad lectora. Las actividades son la explicación del proyecto a las familias para que colaboren en casa; la recopilación por el profesorado de información en la biblioteca de revistas de literatura infantil y de Internet, y la selección de los libros idóneos para cada edad; sesiones en el aula de informática para enseñar a los alumnos a buscar información en Internet sobre literatura infantil; distribución de los treinta libros mejores por edades por las aulas; trabajo con libros firmados y comentados por el autor o ilustrador; celebración de coloquios en torno a los valores del libro; elaboración de fichas de biblioteca de aula sobre los libros leídos; celebración de un día abierto para los padres para que comprueben el trabajo realizado; y visita de los alumnos al pabellón infantil de la Feria del Libro de Madrid. La evaluación se realiza a través de un registro de los libros leídos por cada alumno, contabilización de los libros leídos este año en comparación con los años anteriores, comprobación de la capacidad de los alumnos para obtener información sobre libros por Internet, coloquios en clase para evaluar la asimilación de los valores de los tres libros destacados, recogida de datos a través del Área de Lenguaje sobre los progresos en comprensión y expresión, y cuestionario para los alumnos. Se elaboran materiales, que se incluyen como anexos, como una bibliografía sobre animación a la lectura para el profesorado, un listado de los mejores libros para leer en la biblioteca de aula por cursos, modelo de cuadro para la biblioteca de aula, documento sobre estrategias de animación a la lectura por ciclos, listado de libros para trabajar de forma especial por ciclos, listado de las mejores direcciones de Internet sobre libros infantiles, fichas de biblioteca de aula por cursos, y fotos de las actividades..

Hábitos de actividad física de las personas mayores en España y condición social.

Resumen tomado de la publicación

Propuesta de trabajo interdisciplinar : hojas didácticas sobre hallazgos romanos del Museo Arqueológico de Ibiza : trabajo interdisciplinar de historia y latín.

Unidad didáctica que presenta cuatro propuestas de trabajo de carácter interdisciplinar relativas a las siguientes piezas expuestas en el Museo Arqueológico de Ibiza: estatua de un thoracator romano, estatua de togado, estatua femenina y planta y fotografías del castellum de Ca'n Pins (Formentera). Dirigida a alumnos de segundo de BUP con el objetivo de que desarrollaran las capacidades de observación, relación, razonamiento y síntesis y, se interesaran en conocer la influencia de Roma en la isla de Ibiza.

A cerâmica e a joalharia : o design como agente de sobrevivência de duas culturas materiais

A Cerâmica nasce da união de três elementos relacionados com a vida do homem – a argila, o fogo e a água – afirmando-se sempre como uma tecnologia criadora de obras ao serviço da comunidade e encarada como um dos primeiros materiais que se relacionaram com a vida e com a morte dos homens “(…) para estes comerem na eternidade” (QUEIRÓS, 1987:21).

Tagua y plata: expresiones contemporáneas (Zonas de contacto y zonas de macidez) [Notas y Apuntes]

A propósito de esta exposición de joyas y objetos ornamentales confeccionados a base de tagua y plata, el autor realiza un breve recorrido sobre la presencia y significaciones de estos dos materiales en la literatura y el folklore ecuatorianos. Indica que la muestra propone renovadas perspectivas en cuanto a colores, texturas y diseño, en una acertada amalgama de vegetal y mineral. Los diseños de plata recurren, al mismo tiempo, a motivos ancestrales, mágicos, sin olvidarse del impacto visual y táctil que pueden producir. La concepción de estas joyas de creación colectiva trasciende, entonces, los límites de lo folklórico, y las convierte en una propuesta estética novedosa.

El entretejido de una literatura boliviana andina desde las novelas Felipe Delgado de Jaime Saenz y Cuando Sara Chura despierte de Juan Pablo Piñeiro (Dossier: Literaturas de la integración, el Sur y su diversidad)

Este ensayo parte por establecer ciertas características de lo que podría ser una literatura boliviana andina. En este sentido, el propósito es señalar algunos componentes ficcionales de este tipo de narrativa a partir del entretejido textual que ofrecen novelas como Felipe Delgado de Jaime Saenz y Cuando Sara Chura despierte de Juan Pablo Piñeiro. Este entretejido localiza las dimensiones de tensión y ruptura que construyen los personajes al interior de cada texto. Saenz y Piñeiro configuran el marco festivo de las almas para conectarlas a realidades superpuestas o de otros lados del mundo interior de los personajes. Es cuando, en consonancia con el mundo interior, irrumpe el mundo paralelo de los seres extraños, ancestros y sombras. Desde la lógica andina, es la irrupción de personas y seres que se comunican para restablecer realidades invisibles y lugares marginales sagrados. Son mundos, cuerpos, memorias y temporalidades que interactúan para dar cuenta de la dimensión existencial andina entre los lugares de la fiesta del Gran Poder, una de las más celebradas en La Paz.

A new micro-machined millimeter-wave and terahertz snap-together rectangular waveguide technology

A novel technique for micro-machining millimeter and submillimeter-wave rectangular waveguide components is reported. These are fabricated in two halves which simply snap together, utilizing locating pins and holes, and are physically robust, and cheap, and easy to manufacture. In addition, S-parameter measurements on these structures are reported for the first time and display lower loss than previously reported micro-machined rectangular waveguides.

Selected wheat seed defense proteins exhibit competitive binding to model microbial lipid interfaces

Puroindolines (Pins) and purothionins (Pths) are basic, amphiphilic, cysteine-rich wheat proteins that play a role in plant defense against microbial pathogens. We have examined the co-adsorption and sequential addition of Pins (Pin-a, Pin-b and a mutant form of Pin-b with Trp-44 to Arg-44 substitution) and β-purothionin (β-Pth) model anionic lipid layers, using a combination of surface pressure measurements, external reflection FTIR spectroscopy and neutron reflectometry. Results highlighted differences in the protein binding mechanisms, and in the competitive binding and penetration of lipid layers between respective Pins and β-Pth. Pin-a formed a blanket-like layer of protein below the lipid surface that resulted in the reduction or inhibition of β-Pth penetration of the lipid layer. Wild-type Pin-b participated in co-operative binding with β-Pth, whereas the mutant Pin-b did not bind to the lipid layer in the presence of β-Pth. The results provide further insight into the role of hydrophobic and cationic amino acid residues in antimicrobial activity.

Helga's dune: 40 years of dune dynamics in the Namib Desert

The dynamics of a small linear dune on the northern margin of the Namib Sand Sea have been monitored using erosion pins placed at the dune tip since 1969. GPS measurements of these pins enabled estimation of the rates of advance and lateral migration of the dune. The average rate of advance of the dune tip over the period 1969–2012 was 1.99 m yr–1 towards 015°. Rates of advance and lateral movement varied over the period of monitoring, with a decrease in rates of advance by a factor of 50%, but an increase in the rate of lateral movement. Changes in dune behavior appear to be related to changes in wind regime and the vegetation cover of the interdune area, as a result of increased rainfall in recent years. This study demonstrates the dynamic nature of the tip of this dune and its sensitivity to changes in winds and sand supply.

Use of extensible internal device in the femur of young dogs

An extensible internal device (EID) was developed to preserve growth plate during the treatment of fracture complications or segmental bone loss from tumour resection in children. Since this type of extensible, trans-physeal, internal fixation device has only been used in a few paediatric cases; the aim of this study was to evaluate an in vivo canine study, a surgical application of this device, and its interference with longitudinal growth of the non-fractured distal femur. Ton clinically healthy two- to three-month-old poodles weighing 1.5-2.3 kg were used. Following a medial approach to the right distal femur, one extremity of the EID, similar to a T-plate, was fixed in the femoral condyle with two cortical screws placed below the growth plate. The other extremity, consisting of an adaptable brim with two screw holes and a plate guide, was fixed in the third distal of the femoral diaphysis with two cortical screws. The EID was removed 180 days after application. All of the dogs demonstrated full weight-bearing after surgery. The values of thigh and stifle circumferences, and stifle joint motion range did not show any difference between operated and control hindlimbs. The plate slid in the device according to longitudinal bone growth, in all but one dog. In this dog, a 10.5% shortening of the femoral shaft was observed due to a lack of EID sliding. The other dogs had the some longitudinal lengths in both femurs. The EID permits longitudinal bone growth without blocking the distal femur growth plate if appropriately placed.

Reuse-based test planning for core-based systems-on-chip

Electronic applications are currently developed under the reuse-based paradigm. This design methodology presents several advantages for the reduction of the design complexity, but brings new challenges for the test of the final circuit. The access to embedded cores, the integration of several test methods, and the optimization of the several cost factors are just a few of the several problems that need to be tackled during test planning. Within this context, this thesis proposes two test planning approaches that aim at reducing the test costs of a core-based system by means of hardware reuse and integration of the test planning into the design flow. The first approach considers systems whose cores are connected directly or through a functional bus. The test planning method consists of a comprehensive model that includes the definition of a multi-mode access mechanism inside the chip and a search algorithm for the exploration of the design space. The access mechanism model considers the reuse of functional connections as well as partial test buses, cores transparency, and other bypass modes. The test schedule is defined in conjunction with the access mechanism so that good trade-offs among the costs of pins, area, and test time can be sought. Furthermore, system power constraints are also considered. This expansion of concerns makes it possible an efficient, yet fine-grained search, in the huge design space of a reuse-based environment. Experimental results clearly show the variety of trade-offs that can be explored using the proposed model, and its effectiveness on optimizing the system test plan. Networks-on-chip are likely to become the main communication platform of systemson- chip. Thus, the second approach presented in this work proposes the reuse of the on-chip network for the test of the cores embedded into the systems that use this communication platform. A power-aware test scheduling algorithm aiming at exploiting the network characteristics to minimize the system test time is presented. The reuse strategy is evaluated considering a number of system configurations, such as different positions of the cores in the network, power consumption constraints and number of interfaces with the tester. Experimental results show that the parallelization capability of the network can be exploited to reduce the system test time, whereas area and pin overhead are strongly minimized. In this manuscript, the main problems of the test of core-based systems are firstly identified and the current solutions are discussed. The problems being tackled by this thesis are then listed and the test planning approaches are detailed. Both test planning techniques are validated for the recently released ITC’02 SoC Test Benchmarks, and further compared to other test planning methods of the literature. This comparison confirms the efficiency of the proposed methods.

Designing single event upset mitigation techniques for large SRAM-Based FPGA components

This thesis presents the study and development of fault-tolerant techniques for programmable architectures, the well-known Field Programmable Gate Arrays (FPGAs), customizable by SRAM. FPGAs are becoming more valuable for space applications because of the high density, high performance, reduced development cost and re-programmability. In particular, SRAM-based FPGAs are very valuable for remote missions because of the possibility of being reprogrammed by the user as many times as necessary in a very short period. SRAM-based FPGA and micro-controllers represent a wide range of components in space applications, and as a result will be the focus of this work, more specifically the Virtex® family from Xilinx and the architecture of the 8051 micro-controller from Intel. The Triple Modular Redundancy (TMR) with voters is a common high-level technique to protect ASICs against single event upset (SEU) and it can also be applied to FPGAs. The TMR technique was first tested in the Virtex® FPGA architecture by using a small design based on counters. Faults were injected in all sensitive parts of the FPGA and a detailed analysis of the effect of a fault in a TMR design synthesized in the Virtex® platform was performed. Results from fault injection and from a radiation ground test facility showed the efficiency of the TMR for the related case study circuit. Although TMR has showed a high reliability, this technique presents some limitations, such as area overhead, three times more input and output pins and, consequently, a significant increase in power dissipation. Aiming to reduce TMR costs and improve reliability, an innovative high-level technique for designing fault-tolerant systems in SRAM-based FPGAs was developed, without modification in the FPGA architecture. This technique combines time and hardware redundancy to reduce overhead and to ensure reliability. It is based on duplication with comparison and concurrent error detection. The new technique proposed in this work was specifically developed for FPGAs to cope with transient faults in the user combinational and sequential logic, while also reducing pin count, area and power dissipation. The methodology was validated by fault injection experiments in an emulation board. The thesis presents comparison results in fault coverage, area and performance between the discussed techniques.

The online distribution strategy of luxury products and their vertical extensions

Uma importante tendência do mercado de luxo é a extensão de marca em um novo segmento de mercado por meio da chamada extensão vertical, que pode ser para cima ou para baixo. Em outras palavras, significa que a organização passa a atuar em um novo segmento dentro de uma mesma categoria de produtos, mas com diferente público-alvo que sua marca original. Nesse processo, a empresa inicia atividade em um novo segmento com diferente nível de luxo. A distribuição é um aspecto fundamental do composto de Marketing e a importância da internet como canal de distribuição dessa indústria tem aumentado expressivamente nos últimos anos. Dessa forma, faz-se necessário compreender como as marcas de luxo gerenciam suas estratégias de distribuição online quando desenvolvem processos de extensão de marca e penetração em novos segmentos. Com o objetivo de analisar a estratégia de distribuição da indústria de luxo, um estudo exploratório foi desenvolvido focando bens de luxo pessoal (em categorias como costura, relógios & jóias, couro e sapatos). Uma amostra significativa constituída de marcas originais e suas extensões foi analisada para constituir um modelo comparativo entre duas variáveis: o nível de diferenciação entre os canais de distribuição da marca original e suas extensões; e a distância entre as próprias marcas no que concerne ao seus posicionamentos. Esse estudo contribui para o entendimento da dinâmica de distribuição do mercado e colabora com a compreensão do comportamento das empresas que atuam nele, dependendo do tipo de extensões que elas desenvolvem e da forma como elas são conduzidas.