Uma cidade em transformação: a influência da atividade do crediário nas mudanças da paisagem urbana de Tenente Ananias-RN

Studies on the urban landscape and on the changes of the urban space are relevant, since they reveal the economic dynamics and the way of life in the cities. Research on small towns, in particular, can display particular aspects and by so doing broaden the comprehension of this theme. The purpose of this research is to analyze the changes in the urban landscape and in the way of life of the inhabitants of the town of Tenente Ananias-RN that have been taking place since the 1990s up to the present (2013) and which result mainly from the commercial activity of crediário. The study is, therefore, a reflection on the impact of crediário economy on the urban landscape and on the way of life of a small town located in the hinterland of the State of Rio Grande do Norte. For this reason, it was necessary to study the landscape and the way of life found in Tenente Ananias in two moments: a) before the rise of the crediário, a period of time ranging from the town‟s initial emergence until the beginning of the 1990s; b) during the progress of crediário activity, from the beginning of the 1990s, when it starts, up to the present (2013). For this research, primary data (interviews, local survey visits) and secondary data (books, articles, reports, census data) were used. As a result of this study, it was possible to conclude that crediário plays a fundamental role for the explanation of the changes taking place in Tenente Ananias-RN, especially in the urban landscape and in the way of life of people. We have attempted, through this research, to contribute to the studies of a historical, social and economic process related to the urban landscape and space of a small town in the State of Rio Grande do Norte

Entre o cartão-postal e a cidade real: um estudo sobre paisagem e produção imobiliária em Natal/RN

Recent studies concerning the landscape have investigated the most important activities that contribute for its modification and have tried to better understand the society through the marks left by its quotidian. It is understood that singular landscapes constitute the cultural patrimonies of the cities, once they are part of the daily life of the citizens and are present in their social representations. Some contemporary authors defend the preservation of the natural and urban landscape trying, specially, to keep its importance for the local population. Natal is a city where the ambient qualities are well defined and known by the beauty of the area where it is located. Situated just between a river and the sea, the city grew following its geographic characteristics. The Potengi River, the Atlantic Ocean and the vast dunes ecosystem represented natural limits to the urban expansion; at the same time they have favored the development of a landscape pattern marked by the dialectic between the natural elements and the human interventions. However, this relationship changed after the intensification of the high rising development process that took place since the 1960s. The urban legislation tried to preserve the features of the local landscape delimiting Areas for Controlling Building High , destined to protect the scenic value of some parts of the city. On the other hand, the civil construction sector has made constant pressure in sense to abolish or to modify this legal instrument, aiming profits that have increased, in the 1990s, because of the consumption and the qualification of the urban space for tourist activities. It is necessary the raising of new elements to stimulate the quarrel about the landscape preservation, the process of the urban space production and the best way for the legislation implementation. This work tries to raise elements about the subject at local level, in sense to use Natal City experience to contribute for the formulation of indicators to raise the question about the lack of measure for subjective values, for example the cultural and affective value of the landscape. The natural elements inserted in the urban profile, represent strong visual references and supply identity to the town; they are part of the collective imaginary and are detached in the social context of the city. Then, why the preservation of the landscape, that estimates the improvement in the quality of life, is not enough to justify the controlling building high already previewed as part of Natal City Legislation? These questions send us to the approach of the landscape, as a community patrimony, alerting that some of its significant esthetics attributes must be preserved as a legacy for the future generations

Planejamento paisagístico do Campus Universitário da Faculdade de Ciências Agronômicas, UNESP, Botucatu, S.P

O Planejamento Paisagístico do Campus da Faculdade de Ciências Agronômicas da Universidade Estadual Paulista (UNESP) em Botucatu - SP, foi elaborado a partir de um Plano Diretor já existente e considerado o comportamento da paisagem, com edificações e circulações já estabelecidas, dando ênfase ao projeto de ajardinamento do entorno da Central de Salas de Aulas. Os objetivos principais do planejamento visam a proteção do solo, arborização adequada e ajardinamento do encontro dos prédios principais. O traçado proposto é simples, com a finalidade de dar uma escala humana ao Campus, considerando a necessidade dos usuários e de favorecer a utilização de máquinas para manutenção e tratos culturais, em face da pequena disponibilidade de mão-de-obra, sendo mais elaborado somente nos entornos dos prédios principais. A estrutura vegetal é formada de árvores, arbustos, gramados e outras forrações que foram selecionadas por sua rusticidade, resistência, aclimatação ao local e disponibilidade nos Viveiros Experimentais da Faculdade de Ciências Agronômicas-UNESP. Procurou-se utilizar, sempre que possível, espécies nativas

Desenvolvimento de mudas de bromélia (Neoregelia cruenta (R. Graham) L. B. Smith) cultivadas em diferentes substartos e adubação foliar

As bromélias apresentam formas exóticas com uma grande diversidade de cores e de flores, constituindo importantes espécies para uso em paisagismo e floricultura. em conseqüência disto, são muito comercializadas. Porém, parte das plantas que se encontram no mercado, ainda são provenientes do extrativismo. Esta situação é também reflexo do pequeno número de informações sobre técnicas de propagação e cultivo. Uma das limitações é o desconhecimento do tipo de substrato e adubação adequados ao cultivo destas espécies. Assim, o objetivo deste trabalho foi avaliar o crescimento de bromélias do Neoregelia cruenta, cultivadas em diferentes substratos e adubações foliares através da altura, do número de folhas, da matéria fresca e seca, da parte aérea e das raízes. As mudas utilizadas foram provenientes de cultura de tecidos. Após um período de pré-aclimatização, foram transplantadas para estufa sem nebulização. Os substratos foram constituídos da mistura de diferentes proporções de solo, areia, casca de arroz carbonizada e por um substrato comercial à base de vermiculita. Aos substratos foi aplicada adubação foliar, combinando uréia e sacarose, em intervalos de quinze dias. Os resultados obtidos mostraram que as interações entre os substratos, dose de sacarose e de uréia, não afetaram a altura das mudas e o número de folhas. O uso de sacarose também não influenciou o desenvolvimento das mudas. O substrato comercial à base de vermiculita, independente da aplicação de adubação foliar, proporcionou maior altura das mudas e número de folhas. A aplicação de uréia apresentou efeito linear crescente durante o período avaliado.

Efeitos da luminosidade no crescimento de mudas de Caesalpinia ferrea Mart. ex Tul. (Leguminosae, Caesalpinoideae)

Caesalpinia ferrea is a species used a lot as a medicinal plant, for urban arborization and landscape design in the state of Amapa. Yet there is not much ecophysiological information available on it. Light is an important environment factor that controls processes associates with the accumulation of dry matter, contributing thus for plant growth. The object of this research was to study the effect of different luminosity levels on the growth of seedlings of this species. The seedlings were transplanted to plastics bags containing a mixture of soil and sand (2:1), which were maintained in the full sun, under artificial shade with reduction of 50% and 70% of the luminosity and under natural shade of a closed canopy of forest. The experimental design was completely randomized with five replicates. Seedlings submitted to natural shade showed strong growth inhibition. In the full sun, the seedlings presented higher net assimilatory rate (NAR), lower shoot/root ratio (SRR) and lower leaf area ratio (LAR). The results showed little difference in the growth and biomass allocation between seedlings kept in 50 and 70% shade; the seedlings submitted to this treatment presented higher values of SRR and LAR. This indicates plasticity which influences a possible increase in light capture and is important, therefore, to keep the seedling growth and survival under low light levels. The results as a whole showed morphological and physiological adjustment to different light levels in Caesalpinia ferrea.

Histological findings following the use of a space-making device for bone reformation and implant integration in the maxillary sinus of primates

Background: Previous studies have shown that membrane elevation results in predictable bone formation in the maxillary sinus provided that implants can be placed as tent poles. In situations with an extremely thin residual crest which impairs implant placement, it is possible that a space-making device can be used under the sinus membrane to promote bone formation prior to placement of implants. Purpose: The present study was conducted to test the hypothesis that the use of a space-making device for elevation of the sinus membrane will result in predictable bone formation at the maxillary sinus floor to allow placement of dental implants. Materials and Methods: Eight tufted capuchin primates underwent bilateral sinus membrane elevation surgery, and a bioresorbable space-making device, about 6 mm wide and 6 mm in height, was placed below the elevated membrane on the sinus floor. An oxidized implant (Nobel Biocare AB, Gothenburg, Sweden) was installed in the residual bone protruding into the created space at one side while the other side was left without an implant. Four animals were sacrificed after 6 months of healing. The remaining four animals received a second implant in the side with a space-making device only and followed for another 3 months before sacrifice. Implant stability was assessed through resonance frequency analysis (RFA) using the Osstell™ (Osstell AB, Gothenburg, Sweden) at installation, 6 months and 9 months after the first surgery. The bone-implant contact (BIC) and bone area inside the threads (BA) were histometrically evaluated in ground sections. Results: Histologically there were only minor or no signs of bone formation in the sites with a space-making device only. Sites with simultaneous implant placement showed bone formation along the implant surface. Sites with delayed implant placement showed minor or no bone formation and/or formation of a dense fibrous tissue along the apical part of the implant surface. In the latter group the apical part of the implant was not covered with the membrane but protruded into the sinus cavity. Conclusions: The use of a space-making device, with the design used in the present study, does not result in bone formation at the sinus floor. However, membrane elevation and simultaneous placement of the device and an implant does result in bone formation at the implant surface while sites with implants placed 6 months after membrane elevation show only small amounts of bone formation. It is suggested that lack of stabilization of the device and/or a too extensive elevation of the membrane may explain the results. © 2009, Wiley Periodicals, Inc.

Crescimento da grama bermudas sob diferentes lâminas de irrigação

The objective of the present study was to analyze the most appropriate water depth for maintaining a good quality of Bermudas Grass (Cynodon dactylon) for soccer fields while saving water and electrical resources. Four treatments were used: T1 - irrigated with a water depth of 50% of evapotranspiration (ETo), T2 - irrigated with a water depth of 75% of ETo, T3 - irrigated with a water depth of 100% of ETo and T4 - irrigated with a water depth of 150% of ETo, all treatments were irrigated daily. The reference ETo was obtained by the Penman-Monteith method. The study was conducted in an experimental area of the Instituto Federal de Educação, Ciência e Tecnologia do Triângulo Mineiro - Campus Uberaba, Uberaba, Minas Gerais, Brazil, from June to September 2010 and from January to March 2011. Three evaluations of the variables were performed during the experimental period. The samples were obtained with the help of a cylindrical extractor with 10 cm in diameter and 30 cm in height. In each sample height and dry organic matter (leaf, root and organic material) were analyzed. The experimental design was randomized block with four treatments in five blocks. No significant differences were observed for dry matter and height (roots and organic material). The best results were those for T4 which obtained the greatest height.

O design na indústria moveleira brasileira e seus aspectos sustentáveis: estudo de caso no pólo moveleiro de Arapongas-Pr

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

O design e a consciência da sustentabilidade integral: o projeto Tamar na Vila Regência, ES

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Parque público como reestruturador de elementos urbanos: revitalização da antiga siderúrgica de Lençóis Paulista

The intention of this survey is develop design actions about the site of the former steel from Lençóis Paulista, a large and impressive area, but underutilized in the town. The aim is to revitalize it since the analysis and knowledge from the place and its surroundings, in order to solve the analysis observed: the non integration of the town, neighborhoods and public adjacent devices with the interior of the mentioned spot

Design Participativo para a Sustentabilidade: desenvolvimento de painéis modulares para fechamentos, utilizando bambu associado com terra e resíduos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Active fibre-reinforced composites with embedded shape memory alloys

This dissertation concerns active fibre-reinforced composites with embedded shape memory alloy wires. The structural application of active materials allows to develop adaptive structures which actively respond to changes in the environment, such as morphing structures, self-healing structures and power harvesting devices. In particular, shape memory alloy actuators integrated within a composite actively control the structural shape or stiffness, thus influencing the composite static and dynamic properties. Envisaged applications include, among others, the prevention of thermal buckling of the outer skin of air vehicles, shape changes in panels for improved aerodynamic characteristics and the deployment of large space structures. The study and design of active composites is a complex and multidisciplinary topic, requiring in-depth understanding of both the coupled behaviour of active materials and the interaction between the different composite constituents. Both fibre-reinforced composites and shape memory alloys are extremely active research topics, whose modelling and experimental characterisation still present a number of open problems. Thus, while this dissertation focuses on active composites, some of the research results presented here can be usefully applied to traditional fibre-reinforced composites or other shape memory alloy applications. The dissertation is composed of four chapters. In the first chapter, active fibre-reinforced composites are introduced by giving an overview of the most common choices available for the reinforcement, matrix and production process, together with a brief introduction and classification of active materials. The second chapter presents a number of original contributions regarding the modelling of fibre-reinforced composites. Different two-dimensional laminate theories are derived from a parent three-dimensional theory, introducing a procedure for the a posteriori reconstruction of transverse stresses along the laminate thickness. Accurate through the thickness stresses are crucial for the composite modelling as they are responsible for some common failure mechanisms. A new finite element based on the First-order Shear Deformation Theory and a hybrid stress approach is proposed for the numerical solution of the two-dimensional laminate problem. The element is simple and computationally efficient. The transverse stresses through the laminate thickness are reconstructed starting from a general finite element solution. A two stages procedure is devised, based on Recovery by Compatibility in Patches and three-dimensional equilibrium. Finally, the determination of the elastic parameters of laminated structures via numerical-experimental Bayesian techniques is investigated. Two different estimators are analysed and compared, leading to the definition of an alternative procedure to improve convergence of the estimation process. The third chapter focuses on shape memory alloys, describing their properties and applications. A number of constitutive models proposed in the literature, both one-dimensional and three-dimensional, are critically discussed and compared, underlining their potential and limitations, which are mainly related to the definition of the phase diagram and the choice of internal variables. Some new experimental results on shape memory alloy material characterisation are also presented. These experimental observations display some features of the shape memory alloy behaviour which are generally not included in the current models, thus some ideas are proposed for the development of a new constitutive model. The fourth chapter, finally, focuses on active composite plates with embedded shape memory alloy wires. A number of di®erent approaches can be used to predict the behaviour of such structures, each model presenting different advantages and drawbacks related to complexity and versatility. A simple model able to describe both shape and stiffness control configurations within the same context is proposed and implemented. The model is then validated considering the shape control configuration, which is the most sensitive to model parameters. The experimental work is divided in two parts. In the first part, an active composite is built by gluing prestrained shape memory alloy wires on a carbon fibre laminate strip. This structure is relatively simple to build, however it is useful in order to experimentally demonstrate the feasibility of the concept proposed in the first part of the chapter. In the second part, the making of a fibre-reinforced composite with embedded shape memory alloy wires is investigated, considering different possible choices of materials and manufacturing processes. Although a number of technological issues still need to be faced, the experimental results allow to demonstrate the mechanism of shape control via embedded shape memory alloy wires, while showing a good agreement with the proposed model predictions.

Design and implementation of a 3D computer game controller using inertial MEMS sensors

Though 3D computer graphics has seen tremendous advancement in the past two decades, most available mechanisms for computer interaction in 3D are high cost and targeted for industry and virtual reality applications. Recent advances in Micro-Electro-Mechanical-System (MEMS) devices have brought forth a variety of new low-cost, low-power, miniature sensors with high accuracy, which are well suited for hand-held devices. In this work a novel design for a 3D computer game controller using inertial sensors is proposed, and a prototype device based on this design is implemented. The design incorporates MEMS accelerometers and gyroscopes from Analog Devices to measure the three components of the acceleration and angular velocity. From these sensor readings, the position and orientation of the hand-held compartment can be calculated using numerical methods. The implemented prototype is utilizes a USB 2.0 compliant interface for power and communication with the host system. A Microchip dsPIC microcontroller is used in the design. This microcontroller integrates the analog to digital converters, the program memory flash, as well as the core processor, on a single integrated circuit. A PC running Microsoft Windows operating system is used as the host machine. Prototype firmware for the microcontroller is developed and tested to establish the communication between the design and the host, and perform the data acquisition and initial filtering of the sensor data. A PC front-end application with a graphical interface is developed to communicate with the device, and allow real-time visualization of the acquired data.

Design of a lab scale direct-filtration system and its application in process lab

The Environmental Process and Simulation Center (EPSC) at Michigan Technological University started accommodating laboratories for an Environmental Engineering senior level class CEE 4509 Environmental Process and Simulation Laboratory since 2004. Even though the five units that exist in EPSC provide the students opportunities to have hands-on experiences with a wide range of water/wastewater treatment technologies, a key module was still missing for the student to experience a full cycle of treatment. This project fabricated a direct-filtration pilot system in EPSC and generated a laboratory manual for education purpose. Engineering applications such as clean bed head loss calculation, backwash flowrate determination, multimedia density calculation and run length prediction are included in the laboratory manual. The system was tested for one semester and modifications have been made both to the direct filtration unit and the laboratory manual. Future work is also proposed to further refine the module.

Design, construction, and testing of a research quality electric machine testbed

With energy demands and costs growing every day, the need for improving energy efficiency in electrical devices has become very important. Research into various methods of improving efficiency for all electrical components will be a key to meet future energy needs. This report documents the design, construction, and testing of a research quality electric machine dynamometer and test bed. This test cell system can be used for research in several areas including: electric drives systems, electric vehicle propulsion systems, power electronic converters, load/source element in an AC Microgrid, as well as many others. The test cell design criteria, and decisions, will be discussed in reference to user functionality and flexibility. The individual power components will be discussed in detail to how they relate to the project, highlighting any feature used in operation of the test cell. A project timeline will be discussed, clearly stating the work done by the different individuals involved in the project. In addition, the system will be parameterized and benchmark data will be used to provide the functional operation of the system. With energy demands and costs growing every day, the need for improving energy efficiency in electrical devices has become very important. Research into various methods of improving efficiency for all electrical components will be a key to meet future energy needs. This report documents the design, construction, and testing of a research quality electric machine dynamometer and test bed. This test cell system can be used for research in several areas including: electric drives systems, electric vehicle propulsion systems, power electronic converters, load/source element in an AC Microgrid, as well as many others. The test cell design criteria, and decisions, will be discussed in reference to user functionality and flexibility. The individual power components will be discussed in detail to how they relate to the project, highlighting any feature used in operation of the test cell. A project timeline will be discussed, clearly stating the work done by the different individuals involved in the project. In addition, the system will be parameterized and benchmark data will be used to provide the functional operation of the system.