Impacts of climate change scenarios on terrestrial productivity and biomass for energy in the Iberian Peninsula: assessment through the JSBACH model

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente, Perfil de Gestão e Sistemas Ambientais

Measuring poverty in Portugal: an absolute approach

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

Measuring the impact with the social return on investment: the case of the social innovation HUB

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

Reducing Discomfort While Measuring Crown-Heel Length in Neonates

To assess the degree of discomfort caused by length measurement in neonates, performed with one or both lower limbs extended, on the first and second day after birth, with either one or both lower limbs extended. METHODS: Healthy full-term neonates were systematically sampled during the months of February and March 2004. Crown-heel length was measured, using a 1-mm precision neonatometer, at approximately 8 h and 32 h after birth, with one and both lower limbs extended. The Neonatal Facial Coding System was used to assess discomfort during measurements. Data were analysed by parametric and non-parametric tests as appropriate. RESULTS: Whatever the measurement technique, discomfort scores are significantly higher during the length measurement than at baseline. Whenever length measurements are performed, discomfort scores are significantly higher when extending both lower limbs rather than one lower limb (p < 0.006). The measured length is greater with one lower limb extended; however, the difference decreases over time, being 0.19 cm (95% CI 0.1-0.3; p < 0.001) at approximately 32 h of age. No significant differences in length were found between measurements at approximately 8 or 32 h, regardless of the technique used. The best correlation between length measurements with one or both lower limbs extended was observed at approximately 32 h after birth (r = 0.98). CONCLUSION: Measuring crown-heel length is a distressful procedure for the neonate. Measurements with one lower limb extended result in less discomfort than when both lower limbs are extended, without decreasing the accuracy.

Protectionism and the productivity of the automotive industry in Brazil

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

Gestão de infra-estruturas e avaliação de equipamentos laboratoriais

RESUMO: A confiabilidade e qualidade dos resultados clínicos de um laboratório, estão dependentes da qualidade do equipamento onde estes são processados. A qualidade de um equipamento consiste em apresentar resultados com uma confiabilidade metrológica de acordo com os processos de medição realizados. Desta forma, os equipamentos de medição devem conter características metrológicas de acordo com os requisitos dos processos que estão inseridos, tais como: erro máximo, incerteza, resolução… Todos os equipamentos por muito bons que sejam, apresentam perdas das suas características metrológicas ao longo do tempo, o que se torna importante a determinação periódica das suas calibrações, manutenções e o seu respectivo ajuste. A periodicidade das calibrações, devem ser baseadas, em critérios bem estabelecidos de modo a evitar a ocorrência da não conformidade, devido às medições com os equipamentos fora das suas especificações, garantindo-se assim, a confiabilidade metrológica e o aumento da produtividade devido ao controlo dos processos, evitando-se desta forma qualquer tipo de avaria por parte destes. Os normativos de Qualidade e Certificação estabelecem como requisito a calibração dos equipamentos de medição em intervalos adequados, mas não definem claramente qual o intervalo adequado. O importante é gerir as etapas de calibração e manutenção de acordo com os equipamentos de modo a garantir que os resultados emitidos por estes sejam mantidos em condições confiáveis, dentro do período entre calibrações e manutenções, de modo a que nãoocorra uma condição de falha, e por conseguinte, medições com grande quantidade de erros.------------ ABSTRACT: The reliability and quality of the results of a clinical laboratory, are dependent on the quality of the equipment where they are processed. The quality of a product is to present results with a metrological reliability according to the measuring processes carried out. Thus, measuring equipment must contain metrological characteristics according to the requirements of the processes that are included, such as: maximum error, uncertainty, resolution ... All equipment for very good they are, show losses of its metrological characteristics over time, it becomes important to determine its periodic calibrations, maintenance and its adjustment. The frequency of calibrations should be based on well-established criteria in order to avoid the occurrence of non-compliance due to the measurements with the equipment beyond its specifications, thus ensuring the metrological reliability and increased productivity due to the control of processes, thus avoiding any kind of damage on the part thereof. The normative and Quality Certification as a requirement to establish calibration of measuring equipment at appropriate intervals, but not clearly stipulate the proper range. It is important to manage the steps of calibration and maintenance equipment according to ensure that the results emitted by these conditions are maintained in trusted within the period between calibrations and maintenance, sothat there occurs a fault condition, and therefore, large amount of measurements with errors.

Measuring chromosome-end fusions in fission yeast

Dissertation presented to obtain the Ph.D degree in Molecular Biology

Use of swine waste-derived biogas to enhance microalgae productivity.

The effects of swine wastewater-derived biogas on microalgae productivity were determined. Experiments were conducted in a closed photobioreactor containing digestate effluent as culturing media and biogas in the headspaceas source of CO2. Experiments were carried out under mixothrophic and autothrophic conditions. Results showed that autotrophic growth rate (0.6 d-1)was twofoldfaster than mixotrophic. Frequent reinjections of biogas containing up to 2,000 ppm of hydrogen sulfide was not inhibitory to microalgae growth. The rapid removal of H2S in the system suggests photobioreactors can be an interesting alternative to biogas purification. A model to estimate microalgae productivity based on the amount of available CO2, inorganic and organic carbon was developedand showed good data fit correlation (r²= 0.99).

Recognising, measuring and disclosing intangible assets under IAS 38 and IFRIC 12: Evidence from the Portuguese listed companies

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Macroalgal (Enteromorpha spp. and Ulva spp.) primary productivity in the Ria Formosa Lagoon

Dissertação para obtenção do grau de Mestre em Ecologia, Gestão e Modelação dos Recursos Marinhos

Donations of non-financial resources: The motivation and consequences of measuring and accounting for it

This thesis focus on the measurement and accounting of contributions received by nonprofit organizations, as they are a significant component of revenues nowadays. A survey was developed and forward to 38 different NPOs, with the goal of understanding their motivations and what advantages and disadvantages they believe would result if they start to measure and account for all kinds of contributions. They presented many advantages from this practice; however, some are not doing it due to the difficulties in valuing contributions with no market value which would require a higher workload, waste of resources and time to be taken from other important activities.

Productivity gains from migration: An analysis of Cape Verdean return migrants

Are return migrants more productive than non-migrants? If so, is it a causal effect or simply self-selection? Existing literature has not reached a consensus on the role of return migration for origin countries. To answer these research questions, an empirical analysis was performed based on household data collected in Cape Verde. One of the most common identification problems in the migration literature is the presence of migrant self-selection. In order to disentangle potential selection bias, we use instrumental variable estimation using variation provided by unemployment rates in migrant destination countries, which is compared with OLS and Nearest Neighbor Matching (NNM) methods. The results using the instrumental variable approach provide evidence of labour income gains due to return migration, while OLS underestimates the coefficient of interest. This bias points towards negative self-selection of return migrants on unobserved characteristics, although the different estimates cannot be distinguished statistically. Interestingly, migration duration and occupational changes after migration do not seem to influence post-migration income. There is weak evidence that return migrants from the United States have higher income gains caused by migration than the ones who returned from Portugal.

Measuring the impact of short and lending practices using the DGTW benchmarks

Mutual fund managers increasingly lend their holdings and/or use short sales to generate higher returns for their funds. This project presents a first look into the impact these practices on performance using the performance measures: i) Characteristic Selectivity (CS), the ability of the fund's managers to choose stocks that outperform their benchmarks; ii) Characteristic Timing (CT), the ability of the manager to time the market; iii) and Average Style (AS), the returns from funds systematically holding stocks with certain characteristics. These returns are computed through the DGTW benchmarks. The effect of other variables that have also been shown to impact fund’s returns – total net assets under management, investment styles, turnover and expense ratios – will also be analyzed. I find that managers who use short-sales do not exhibit better stock picking abilities than those who do not, while mutual funds that lend do present higher CS returns. In addition, while lending is not significant for the total performance of a fund, the employment of short-sales and of both short-sales and lending has a negative impact on the fund’s performance.

Measuring social impact: A guideline to implement a tableau de bord

Many impact-seeking organisations cannot measure and demonstrate their social impact because they either lack technical expertise or requisite financial and human resources. This report clarifies the process of social impact measurement to help these organisations engage in social impact measurement practices. It presents a simple guideline to create a measurement approach based on the Tableau de Board. The guideline has been developed through a theoretical revision of best practices in social impact measurement, academic research and the author's individual thoughts and ideas. While a first testing of the approach revealed positive feedback, only future broad-scale testing will demonstrate the approach’s validity and feasibility.

Measuring poverty in Portugal: An absolute approach

The aim of this article is to measure poverty in Portugal from an absolute perspective. We estimated several absolute poverty lines and defined maximum and minimum thresholds. We applied aggregation measures to these thresholds and constructed probit models to assess the effect of some variables on poverty. The intervals obtained contain the poverty lines constructed by other approaches. We got evidence that poverty is positively correlated with the number of people in the household, with living alone; negatively correlated with the number of workers in the household, the share on non-food expenditure and the existence of a heating device at home.