Convolutional Neural Network-based place recognition

Recently Convolutional Neural Networks (CNNs) have been shown to achieve state-of-the-art performance on various classification tasks. In this paper, we present for the first time a place recognition technique based on CNN models, by combining the powerful features learnt by CNNs with a spatial and sequential filter. Applying the system to a 70 km benchmark place recognition dataset we achieve a 75% increase in recall at 100% precision, significantly outperforming all previous state of the art techniques. We also conduct a comprehensive performance comparison of the utility of features from all 21 layers for place recognition, both for the benchmark dataset and for a second dataset with more significant viewpoint changes.

Sanctuary Place : Sep Yama / Finding Country 5 Ways

Intelligent architecture allows a generosity of reading. It does not expect that we follow the architect’s instructions but that one is allowed to breath their own meaning into it and take away their own memory. Here, on the fringe of a postured architectural mass of national thinking, is an architectural gem. Its purpose, as I see it, is simple: to make a “camp”. In so doing it has accidentally revealed a passion for Country. Not necessarily Country in the way I might define it but Country in at least how I might recognise it; something alive, something powerful to be engaged.

Localization and place recognition using an ultra-wide band (UWB) radar

This paper presents an approach to mobile robot localization, place recognition and loop closure using a monostatic ultra-wide band (UWB) radar system. The UWB radar is a time-of-flight based range measurement sensor that transmits short pulses and receives reflected waves from objects in the environment. The main idea of the poposed localization method is to treat the received waveform as a signature of place. The resulting echo waveform is very complex and highly depends on the position of the sensor with respect to surrounding objects. On the other hand, the sensor receives similar waveforms from the same positions.Moreover, the directional characteristics of dipole antenna is almost omnidirectional. Therefore, we can localize the sensor position to find similar waveform from waveform database. This paper proposes a place recognitionmethod based on waveform matching, presents a number of experiments that illustrate the high positon estimation accuracy of our UWB radar-based localization system, and shows the resulting loop detection performance in a typical indoor office environment and a forest.

In Place of a Conclusion

"Book Description: The phenomenon which dialogism addresses is human interaction. It enables us to conceptualise human interaction as intersubjective, symbolic, cultural, transformative and conflictual, in short, as complex. The complexity of human interaction is evident in all domains of human life, for example, in therapy, education, health intervention, communication, and coordination at all levels. A dialogical approach starts by acknowledging that the social world is perspectival, that people and groups inhabit different social realities. This book stands apart from the proliferation of recent books on dialogism, because rather than applying dialogism to this or that domain, the present volume focuses on dialogicality itself to interrogate the concepts and methods which are taken for granted in the burgeoning literature. (Imprint: Nova Press)"--Publisher website

Critical literacy finds a 'place': Writing and social action in a low-income Australian grad 2/3 classroom

In a study of socioeconomically disadvantaged children's acquisition of school literacies, a university research team investigated how a group of teachers negotiated critical literacies and explored notions of social power with elementary children in a suburban school located in an area of high poverty. Here we focus on a grade 2/3 classroom where the teacher and children became involved in a local urban renewal project and on how in the process the children wrote about place and power. Using the students' concerns about their neighborhood, the teacher engaged her class in a critical literacy project that not only involved a complex set of literate practices but also taught the children about power and the possibilities for local civic action. In particular, we discuss examples of children's drawing and writing about their neighborhoods and their lives. We explore how children's writing and drawing might be key elements in developing "critical literacies" in elementary school settings. We consider how such classroom writing can be a mediator of emotions, intellectual and academic learning, social practice, and political activism.

Literacy, place, and pedagogies of possibility: Working against residualization effects and deficit discourses in poor school communities

Australia has a long history of policy attention to the education of poor and working-class youth (Connell, 1994), yet currently on standardized educational outcomes measures the gaps are widening in ways that relate to social background, including race, location and class. An economic analysis of school choice in Australia reveals that a high proportion of government school students now come from lower Socio-Economic Status (SES) backgrounds (Ryan & Watson, 2004), indicating a trend towards a gradual residualisation of the poor in government schools, with increased private school enrolments as a confirmed national trend. The spatial distribution of poverty and the effects on school populations are not unique to Australia (Lupton, 2003; Lipman, 2011; Ryan, 2010). Raffo and colleagues (2010) recently provided a synthesis of socially critical approaches towards schooling and poverty arguing that what is needed are shifts in the balances of power to reposition those within the educational system as having some say in the ways schooling is organized. ‘Disadvantaged’ primary schools are not a marginal concern for education systems, but now account for a large and growing number of schools that serve an ever increasing population being made redundant, in part-time precarious work, under-employed or unemployed (Thomson 2002; Smyth, Down et al 2010). In Australia, the notion of the ‘disadvantaged’ school now refers to those, mostly public schools, being residualised by a politics of parental choice that drives neoliberalising policy logic (Bonner & Caro 2007; Hattam & Comber, forthcoming 2014; Thomson & Reid, 2003)...

Remaking Guangzhou: Political engagement and place-making on Sina Weibo

This study uses the concept of ‘place-making’ to consider political engagement on Sina Weibo, one of the most popular microblogging services in China. Besides articulating statepublic confrontation during major social controversies, Weibo has been used to recollect and renarrate the memories of a city, such as Guangzhou, where dramatic social and cultural changes took place during the economic reform era. The Chinese government’s ongoing project to create a culturally indifferent ‘national identity’ triggers a defensive response from local places. Through consuming news and information about leisure and entertainment in Guangzhou, the digital narration of the city becomes an important source for Guangzhou people to learn about their geo-identity, and the kind of rights and responsibility attaching to it.

A place carved out by time

A travel story about South Dakota. "Time travel is much easier in life than in the movies. Driving out of Rapid City in South Dakota, you cover 500,000 years in the first hour. That journey brings you to the Badlands, a vast natural excavation site that has been created by water and wind. At the same time, you’re deposited into the deep past..."--publisher website

Performance-Based Quality Assurance/Quality Control (QA/QC) Acceptance Procedures for In-Place Soil Testing Phase 3

One of the objectives of this study was to evaluate soil testing equipment based on its capability of measuring in-place stiffness or modulus values. As design criteria transition from empirical to mechanistic-empirical, soil test methods and equipment that measure properties such as stiffness and modulus and how they relate to Florida materials are needed. Requirements for the selected equipment are that they be portable, cost effective, reliable, a ccurate, and repeatable. A second objective is that the selected equipment measures soil properties without the use of nuclear materials.The current device used to measure soil compaction is the nuclear density gauge (NDG). Equipment evaluated in this research included lightweight deflectometers (LWD) from different manufacturers, a dynamic cone penetrometer (DCP), a GeoGauge, a Clegg impact soil tester (CIST), a Briaud compaction device (BCD), and a seismic pavement analyzer (SPA). Evaluations were conducted over ranges of measured densities and moistures.Testing (Phases I and II) was conducted in a test box and test pits. Phase III testing was conducted on materials found on five construction projects located in the Jacksonville, Florida, area. Phase I analyses determined that the GeoGauge had the lowest overall coefficient of variance (COV). In ascending order of COV were the accelerometer-type LWD, the geophone-type LWD, the DCP, the BCD, and the SPA which had the highest overall COV. As a result, the BCD and the SPA were excluded from Phase II testing.In Phase II, measurements obtained from the selected equipment were compared to the modulus values obtained by the static plate load test (PLT), the resilient modulus (MR) from laboratory testing, and the NDG measurements. To minimize soil and moisture content variability, the single spot testing sequence was developed. At each location, test results obtained from the portable equipment under evaluation were compared to the values from adjacent NDG, PLT, and laboratory MR measurements. Correlations were developed through statistical analysis. Target values were developed for various soils for verification on similar soils that were field tested in Phase III. The single spot testing sequence also was employed in Phase III, field testing performed on A-3 and A-2-4 embankments, limerock-stabilized subgrade, limerock base, and graded aggregate base found on Florida Department of Transportation construction projects. The Phase II and Phase III results provided potential trend information for future research—specifically, data collection for in-depth statistical analysis for correlations with the laboratory MR for specific soil types under specific moisture conditions. With the collection of enough data, stronger relationships could be expected between measurements from the portable equipment and the MR values. Based on the statistical analyses and the experience gained from extensive use of the equipment, the combination of the DCP and the LWD was selected for in-place soil testing for compaction control acceptance. Test methods and developmental specifications were written for the DCP and the LWD. The developmental specifications include target values for the compaction control of embankment, subgrade, and base materials.

Automatic image scaling for place recognition in changing environments

Robustness to variations in environmental conditions and camera viewpoint is essential for long-term place recognition, navigation and SLAM. Existing systems typically solve either of these problems, but invariance to both remains a challenge. This paper presents a training-free approach to lateral viewpoint- and condition-invariant, vision-based place recognition. Our successive frame patch-tracking technique infers average scene depth along traverses and automatically rescales views of the same place at different depths to increase their similarity. We combine our system with the condition-invariant SMART algorithm and demonstrate place recognition between day and night, across entire 4-lane-plus-median-strip roads, where current algorithms fail.

Design intersection: The growth of community-led technology enabled companies

The sharing economy or collaborative consumption based firms have the potential to disrupt long-standing traditional industries. However, little is known on the topic, specifically the role of design in these successful community-led, technology enable firms. It is the proposition of this research that the intrinsic innovation of collaborative consumption firms is not merely a technological one. With successful firms being identified by being able to marry both technological advancement and human insight on product meaning. Therefore, the authors suggest the use of design as an effective way to capitalise and build on product meaning, not only technological advancements in order to foster the growth of a community. To explore this further, the research team decided to investigate two fast growing examples of industry disrupting, sharing economy businesses; Airbnb and Uber. Of the two cases, the use of design was found to be more evident within, Airbnb, due to wide profession of using design techniques. Each case study has been mapped on Guenther’s (2012) framework of techno-economic innovation to help illustrate this marriage of innovation agendas. This paper explored the role of design in community-led companies by presenting an argument for why they have succeeded due to an understanding of human need and key market trends, instead of only technological innovation alone. Findings and implication of these case studies suggest the future role of design as a method to achieve this success. Built on the core tenants of design thinking, these techniques rationalise technology, human needs and business viability to product innovative solutions. Upon these findings, the research team has created a new framework for understanding community-led technology enabled companies, one that builds upon the work of Guenther’s (2012) model of enterprise design innovation. This paper is the first step in a new research agenda.

Place recognition with ConvNet landmarks: Viewpoint-robust, condition-robust, training-free

Place recognition has long been an incompletely solved problem in that all approaches involve significant compromises. Current methods address many but never all of the critical challenges of place recognition – viewpoint-invariance, condition-invariance and minimizing training requirements. Here we present an approach that adapts state-of-the-art object proposal techniques to identify potential landmarks within an image for place recognition. We use the astonishing power of convolutional neural network features to identify matching landmark proposals between images to perform place recognition over extreme appearance and viewpoint variations. Our system does not require any form of training, all components are generic enough to be used off-the-shelf. We present a range of challenging experiments in varied viewpoint and environmental conditions. We demonstrate superior performance to current state-of-the- art techniques. Furthermore, by building on existing and widely used recognition frameworks, this approach provides a highly compatible place recognition system with the potential for easy integration of other techniques such as object detection and semantic scene interpretation.

'There is nothing that identifies me to that place’: Indigenous Women’s Perceptions of Health Spaces and Places

This chapter provides an overview of the gendered realities of Indigenous men’s and Indigenous women’s lives and gendered Indigenous health perspectives. It offers the nurse some examples of the role of the nurse in working within gendered Indigenous health care.

An exploratory study into managing value creation in tourism service firms: Understanding value creation phases at the intersection of the tourism service firm and their customers

To satisfy customers, managers of tourism services need to understand their customers' value requirements and then develop a unique service value offering based on those requirements. This understanding underpins their effort to provide superior value to customers and deliver the proposed services through employees. Problematically, previous work on value creation (i.e. customer value) has focused separately on either the firm or customer. This theoretical separation does not allow investigation of whether there may be discrepancies between what value firms offer and what value customers perceive they have received. We bring tourism service firms (manager and employee) and customers together and examine the nature of a tourism service provider's value proposition, its contribution to the value offering, and subsequent impact on customers' perceived-value-in-use. We focus on the important role that employees play as boundary spanning workers in the value creation phases, linking the tourism service provider and customer.