Impact on Asian firms of product-related environmental regulations through global supply chains : a study of firms in Malaysia

This paper sheds light on the important role played by global supply chains in the adaptation to product-related environmental regulations imposed by importing countries, with a focus on chemicals management. By utilizing a unique data collected in Penang, Malaysia, we depict the supply chain structures and how differences among firms in participation to global supply chain link to differences in chemical management. We found that firms belonging to a supply chain are in a better position to comply with these regulations because information and requirements are transmitted through global supply chains. In contrast, those firms that are neither exporters nor a part of a global supply chain lack the knowledge and information channels relevant to chemical management in a product.

Product quality and intra-industry trade

In this study, we argue that the conventional intra-industry trade (IIT) index does not address the quality issue directly and propose a methodology to make full use of unit-price gap information to deduce quality differences between simultaneously exported and imported products. By applying this measure to German trade data at the eight-digit level, we study the quality improvement of Chinese export goods in its IIT with Germany. We compare the case of China with those of Eastern European countries, which are also major trading partners of Germany. Our results show that the unit-value difference in IIT between Germany and Eastern European countries is clearly narrowing. However, China's export prices to Germany are much lower than Germany's export prices to China, and this gap has not narrowed over the last 23 years. This is at odds with the common perception that China's product quality has improved, as documented by Rodrik (2006) and Schott (2008). Our results support Xu (2010), which argued that incorporating the quality aspect of the exported goods weakens or even eliminates the evidence of the sophistication of Chinese export goods in Rodrik (2006).

How does firm heterogeneity information impact the estimation of embodied carbon emissions in Chinese exports?

Using an augmented Chinese input–output table in which information about firm ownership and type of traded goods are explicitly reported, we show that ignoring firm heterogeneity causes embodied CO2 emissions in Chinese exports to be overestimated by 20% at the national level, with huge differences at the sector level, for 2007. This is because different types of firm that are allocated to the same sector of the conventional Chinese input–output table vary greatly in terms of market share, production technology and carbon intensity. This overestimation of export-related carbon emissions would be even higher if it were not for the fact that 80% of CO2 emissions embodied in exports of foreign-owned firms are, in fact, emitted by Chinese-owned firms upstream of the supply chain. The main reason is that the largest CO2 emitter, the electricity sector located upstream in Chinese domestic supply chains, is strongly dominated by Chinese-owned firms with very high carbon intensity.

Managing software development information in global configuration management activities

Software Configuration Management (SCM) techniques have been considered the entry point to rigorous software engineering, where multiple organizations cooperate in a decentralized mode to save resources, ensure the quality of the diversity of software products, and manage corporate information to get a better return of investment. The incessant trend of Global Software Development (GSD) and the complexity of implementing a correct SCM solution grow not only because of the changing circumstances, but also because of the interactions and the forces related to GSD activities. This paper addresses the role SCM plays in the development of commercial products and systems, and introduces a SCM reference model to describe the relationships between the different technical, organizational, and product concerns any software development company should support in the global market.

Configuration management and product lines to enhance the replication process in software engineering

This research is concerned with the experimental software engineering area, specifically experiment replication. Replication has traditionally been viewed as a complex task in software engineering. This is possibly due to the present immaturity of the experimental paradigm applied to software development. Researchers usually use replication packages to replicate an experiment. However, replication packages are not the solution to all the information management problems that crop up when successive replications of an experiment accumulate. This research borrows ideas from the software configuration management and software product line paradigms to support the replication process. We believe that configuration management can help to manage and administer information from one replication to another: hypotheses, designs, data analysis, etc. The software product line paradigm can help to organize and manage any changes introduced into the experiment by each replication. We expect the union of the two paradigms in replication to improve the planning, design and execution of further replications and their alignment with existing replications. Additionally, this research work will contribute a web support environment for archiving information related to different experiment replications. Additionally, it will provide flexible enough information management support for running replications with different numbers and types of changes. Finally, it will afford massive storage of data from different replications. Experimenters working collaboratively on the same experiment must all have access to the different experiments.

Using configuration management and product line software paradigms to support the experimentation process in software engineering.

There is no empirical evidence whatsoever to support most of the beliefs on which software construction is based. We do not yet know the adequacy, limits, qualities, costs and risks of the technologies used to develop software. Experimentation helps to check and convert beliefs and opinions into facts. This research is concerned with the replication area. Replication is a key component for gathering empirical evidence on software development that can be used in industry to build better software more efficiently. Replication has not been an easy thing to do in software engineering (SE) because the experimental paradigm applied to software development is still immature. Nowadays, a replication is executed mostly using a traditional replication package. But traditional replication packages do not appear, for some reason, to have been as effective as expected for transferring information among researchers in SE experimentation. The trouble spot appears to be the replication setup, caused by version management problems with materials, instruments, documents, etc. This has proved to be an obstacle to obtaining enough details about the experiment to be able to reproduce it as exactly as possible. We address the problem of information exchange among experimenters by developing a schema to characterize replications. We will adapt configuration management and product line ideas to support the experimentation process. This will enable researchers to make systematic decisions based on explicit knowledge rather than assumptions about replications. This research will output a replication support web environment. This environment will not only archive but also manage experimental materials flexibly enough to allow both similar and differentiated replications with massive experimental data storage. The platform should be accessible to several research groups working together on the same families of experiments.

Reporting experiments to satisfy professionals information needs

Although the aim of empirical software engineering is to provide evidence for selecting the appropriate technology, it appears that there is a lack of recognition of this work in industry. Results from empirical research only rarely seem to find their way to company decision makers. If information relevant for software managers is provided in reports on experiments, such reports can be considered as a source of information for them when they are faced with making decisions about the selection of software engineering technologies. To bridge this communication gap between researchers and professionals, we propose characterizing the information needs of software managers in order to show empirical software engineering researchers which information is relevant for decision-making and thus enable them to make this information available. We empirically investigated decision makers? information needs to identify which information they need to judge the appropriateness and impact of a software technology. We empirically developed a model that characterizes these needs. To ensure that researchers provide relevant information when reporting results from experiments, we extended existing reporting guidelines accordingly.We performed an experiment to evaluate our model with regard to its effectiveness. Software managers who read an experiment report according to the proposed model judged the technology?s appropriateness significantly better than those reading a report about the same experiment that did not explicitly address their information needs. Our research shows that information regarding a technology, the context in which it is supposed to work, and most importantly, the impact of this technology on development costs and schedule as well as on product quality is crucial for decision makers.

Evaluating alternative industrial network organizations and information systems

Purpose – The purpose of this paper is to present a simulation‐based evaluation method for the comparison of different organizational forms and software support levels in the field of supply chain management (SCM). Design/methodology/approach – Apart from widely known logistic performance indicators, the discrete event simulation model considers explicitly coordination cost as stemming from iterative administration procedures. Findings - The method is applied to an exemplary supply chain configuration considering various parameter settings. Curiously, additional coordination cost does not always result in improved logistic performance. Influence factor variations lead to different organizational recommendations. The results confirm the high importance of (up to now) disregarded dimensions when evaluating SCM concepts and IT tools. Research limitations/implications – The model is based on simplified product and network structures. Future research shall include more complex, real world configurations. Practical implications – The developed method is designed for the identification of improvement potential when SCM software is employed. Coordination schemes based only on ERP systems are valid alternatives in industrial practice because significant investment IT can be avoided. Therefore, the evaluation of these coordination procedures, in particular the cost due to iterations, is of high managerial interest and the method provides a comprehensive tool for strategic IT decision making. Originality/value – Reviewed literature is mostly focused on the benefits of SCM software implementations. However, ERP system based supply chain coordination is still widespread industrial practice but associated coordination cost has not been addressed by researchers.

Regulation of product chain length by isoprenyl diphosphate synthases

An analysis of the x-ray structure of homodimeric avian farnesyl diphosphate synthase (geranyltransferase, EC 2.5.1.10) coupled with information about conserved amino acids obtained from a sequence alignment of 35 isoprenyl diphosphate synthases that synthesize farnesyl (C15), geranylgeranyl (C20), and higher chain length isoprenoid diphosphates suggested that the side chains of residues corresponding to F112 and F113 in the avian enzyme were important for determining the ultimate length of the hydrocarbon chains. This hypothesis was supported by site-directed mutagenesis to transform wild-type avian farnesyl diphosphate synthase (FPS) into synthases capable of producing geranylgeranyl diphosphate (F112A), geranylfarnesyl (C25) diphosphate (F113S), and longer chain prenyl diphosphates (F112A/F113S). An x-ray analysis of the structure of the F112A/F113S mutant in the apo state and with allylic substrates bound produced the strongest evidence that these mutations caused the observed change in product specificity by directly altering the size of the binding pocket for the growing isoprenoid chain in the active site of the enzyme. The proposed binding pocket in the apo mutant structure was increased in depth by 5.8 Å as compared with that for the wild-type enzyme. Allylic diphosphates were observed in the holo structures, bound through magnesium ions to the aspartates of the first of two conserved aspartate-rich sequences (D117–D121), with the hydrocarbon tails of all the ligands growing down the hydrophobic pocket toward the mutation site. A model was constructed to show how the growth of a long chain prenyl product may proceed by creation of a hydrophobic passageway from the FPS active site to the outside surface of the enzyme.

Thermostable and site-specific DNA binding of the gene product ORF56 from the Sulfolobus islandicus plasmid pRN1, a putative archael plasmid copy control protein

There is still a lack of information on the specific characteristics of DNA-binding proteins from hyperthermophiles. Here we report on the product of the gene orf56 from plasmid pRN1 of the acidophilic and thermophilic archaeon Sulfolobus islandicus. orf56 has not been characterised yet but low sequence similarily to several eubacterial plasmid-encoded genes suggests that this 6.5 kDa protein is a sequence-specific DNA-binding protein. The DNA-binding properties of ORF56, expressed in Escherichia coli, have been investigated by EMSA experiments and by fluorescence anisotropy measurements. Recombinant ORF56 binds to double-stranded DNA, specifically to an inverted repeat located within the promoter of orf56. Binding to this site could down-regulate transcription of the orf56 gene and also of the overlapping orf904 gene, encoding the putative initiator protein of plasmid replication. By gel filtration and chemical crosslinking we have shown that ORF56 is a dimeric protein. Stoichiometric fluorescence anisotropy titrations further indicate that ORF56 binds as a tetramer to the inverted repeat of its target binding site. CD spectroscopy points to a significant increase in ordered secondary structure of ORF56 upon binding DNA. ORF56 binds without apparent cooperativity to its target DNA with a dissociation constant in the nanomolar range. Quantitative analysis of binding isotherms performed at various salt concentrations and at different temperatures indicates that approximately seven ions are released upon complex formation and that complex formation is accompanied by a change in heat capacity of –6.2 kJ/mol. Furthermore, recombinant ORF56 proved to be highly thermostable and is able to bind DNA up to 85°C.

The challenge of contracting for technological information

Contracting to provide technological information (TI) is a significant challenge. TI is an unusual commodity in five ways. (i) TI is difficult to count and value; conventional indicators, such as patents and citations, hardly indicate value. TI is often sold at different prices to different parties. (ii) To value TI, it may be necessary to “give away the secret.” This danger, despite nondisclosure agreements, inhibits efforts to market TI. (iii) To prove its value, TI is often bundled into complete products, such as a computer chip or pharmaceutical product. Efficient exchange, by contrast, would involve merely the raw information. (iv) Sellers’ superior knowledge about TI’s value make buyers wary of overpaying. (v) Inefficient contracts are often designed to secure rents from TI. For example, licensing agreements charge more than marginal cost. These contracting difficulties affect the way TI is produced, encouraging self-reliance. This should be an advantage to large firms. However, small research and development firms spend more per employee than large firms, and nonprofit universities are major producers. Networks of organizational relationships, particularly between universities and industry, are critical in transmitting TI. Implicit barter—money for guidance—is common. Property rights for TI are hard to establish. Patents, quite suitable for better mousetraps, are inadequate for an era when we design better mice. Much TI is not patented, and what is patented sets fuzzy demarcations. New organizational forms are a promising approach to contracting difficulties for TI. Webs of relationships, formal and informal, involving universities, start-up firms, corporate giants, and venture capitalists play a major role in facilitating the production and spread of TI.

Implementation Feasibility of a Digital Nervous System for the Construction Industry: For Efficient and Effective Information Management across the Project Lifecycle

The construction industry has long been considered as highly fragmented and non-collaborative industry. This fragmentation sprouted from complex and unstructured traditional coordination processes and information exchanges amongst all parties involved in a construction project. This nature coupled with risk and uncertainty has pushed clients and their supply chain to search for new ways of improving their business process to deliver better quality and high performing product. This research will closely investigate the need to implement a Digital Nervous System (DNS), analogous to a biological nervous system, on the flow and management of digital information across the project lifecycle. This will be through direct examination of the key processes and information produced in a construction project and how a DNS can provide a well-integrated flow of digital information throughout the project lifecycle. This research will also investigate how a DNS can create a tight digital feedback loop that enables the organisation to sense, react and adapt to changing project conditions. A Digital Nervous System is a digital infrastructure that provides a well-integrated flow of digital information to the right part of the organisation at the right time. It provides the organisation with the relevant and up-to-date information it needs, for critical project issues, to aid in near real-time decision-making. Previous literature review and survey questionnaires were used in this research to collect and analyse data about information management problems of the industry – e.g. disruption and discontinuity of digital information flow due to interoperability issues, disintegration/fragmentation of the adopted digital solutions and paper-based transactions. Results analysis revealed efficient and effective information management requires the creation and implementation of a DNS.

Should energy efficiency be traded off for other product attributes? : an analysis of air-conditioner regulation in Japan

This paper examines the functioning of energy efficiency standards and labeling policies for air conditioners in Japan. The results of our empirical analysis suggest that consumers respond more to label information, which benchmarks the energy efficiency performance of each product to a pre-specified target, than to direct performance measures. This finding provides justification for the setting, and regular updating, of target standards as well as their use in calculating relative performance measures. We also find, through graphical analysis, that air conditioner manufacturers face a tradeoff between energy efficiency and product compactness when they develop their products. This tradeoff, combined with the semi-regular upward revision of minimum energy efficiency standards, has led to the growth in indoor unit size of air conditioners in recent years. In the face of this phenomenon, regulatory rules were revised so that manufacturers could adhere to less stringent standards if the indoor unit size of their product remains below a certain size. Our demand estimates provide no evidence that larger indoor unit size causes disutility to consumers. It is therefore possible that the regulatory change was not warranted from a consumer welfare point of view.

Bombardment energy and fission product yield pattern : protons on Th-232, U-233, and Th-230 /

"Contract No. AT(40-1)-1399."