Variáveis biométricas da cana-de-açúcar fertilizada com resíduos orgânico e industrial e irrigada com água servida e potável

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação do processo industrial da cerâmica vermelha na região do Seridó - RN

Particularly in Braziland in Rio Grande do Norte, companies manufacturing red ceramic, play an important role as agents of development to study the region Seridó- RN, specific place for carrying out the research. It is observed in this region a concentration of red ceramic industries of small size, which, despite its importance in the ceramic, they are unable to enjoy or use the new forms of administrative management and technological advances designed and offered by universities, centers of research and projects of governments, remained almost entirely outside the progress and modernization, technological and administrative. These companies still have outdated technology, and management processes, providing quality problems and standardization of end products. Upon these conditions are the companies going through crisis and struggling to survive alone and without assistance. The region of Seridó-RN, lets make a detailed case study of red ceramic companies in the region proposed from the existing theoretical and actual lifting of the condition of the product manufacturing red ceramic, allowing through this overview of the implementation of collect samples of raw materials, allowing the study of each ceramic industry that contributed to the participation of the research, which was determined parameters such as: analysis of the physical, chemical and technological properties of raw materials, characterization of the processes used, raising the technological resources considering equipment, machinery, supplies, raw materials and facilities available and its organization by type of products from companies involved in this study. The methodology consists of the following steps: collection of raw material, crushing and screening, characterization of raw materials (liquid limit, chemical analysis, mineralogical analysis, differential thermal analysis, sieve analysis), mixing, forming, cutting, drying and burning of ceramic bodies and bodies of evidence. The results showed that it was clay with distinct characteristics with respect to plasticity. With respect to the different compositions of mixtures of ceramic masses, we conclude that the ceramic properties showed a direct proportionality with increasing fraction of the clay not plastic. However, the compositions of the masses studied proved to be the most appropriate for the types of simulated clay for use in ceramics. Adopted in the ceramic processing made it possible to obtain products the resulted in consistent properties, and in some cases even exceeding the requirements of technical studies and standard-Brazilian clays to obtain ceramic products such as tiles, bricks and tiles to floor. Based on the discussions from the results obtained in the various processing steps of this work, one can draw conclusions according to the physico-chemical and mineralogical properties of raw materials, the properties of ceramic products burned and analysis. This work may be used by other researchers, private companies and governmental organizations, undergraduate students and graduate, can develop studies and future research to: develop projects to modify the furnaces; mapping projects develop and rationalize the exploitation of raw materials ;promoting reforestation and forest management; develop reduction projects and recovery of waste; develop training projects in manpower sector, and develop security projects, improving the conditions of work in the area pottery

Secagem do resíduo industrial da acerola em leito de jorro: estudos fluidodinâmicos e análise do desempenho do secador

In this research, the drying process of acerola waste was investigated by using a spouted bed drier. The process was conducted using high density polyethylene inert particles with the objective of producing an ascorbic acid-rich final product. The fruit waste was ground and used to prepare different water-maltodextrin suspensions. Initially, fluidynamical experiments were conducted in order to evaluate the feeding effect on the spouted bed drier fluidynamics behavior. The experimental planning 23 + 3 was used to investigate the effect of the following variables: solids concentration, drying air temperature, intermittence time, production efficiency, solids retention and product losses by elutriation of fine particles on drier walls. The effect of selected independent variables on the drier stability was also evaluated based on a parameter defined as the ratio between the feed suspension volume and the total inert particles volume. Finally, the powder quality was verified in experiments with fixed feed flow and varying air drying temperature, drying air velocity and intermittence time. It was observed that the suspension interferes in the spouted bed drier fluidynamics behavior, and higher air flow is necessary to stabilize the drier. The suspension also promotes the expansion of the spouted bed diameter, decreases the solid circulation and favors the air distribution at the flush area. All variables interfere in the spouted bed performance, and the solids concentration has a major effect on the material retention and losses. The intermittence time also has great effect on the stability and material retention. When it comes to production efficiency, the main effect observed was the drying air temperature. First order models were well adjusted to retention and losses data. The acerola powder presented ascorbic acid levels around 600 to 700 mg/100g. Similar moisture and ascorbic acid levels were obtained for powders obtained by spouted bed and spray drier. However, the powder production efficiency of the spray drier was lower when compared to spouted bed drier. When it comes to energetic analysis, the spray drier process was superior. The results obtained for spouted bed drier are promising and highly dependent on the operational parameters chosen, but in general, it is inferred that this drying process is adequate for paste and suspension drying

Projeto e Operação em Escala Semi-Industrial de um Equipamento para Tratamento de Águas Produzidas na Indústria do Petróleo Utilizando Nova Tecnologia: misturador-decantador à inversão de fases - MDIF

The aim of this work is to use a new technology in the treatment of produced wastewaters from oil industry. An unit for treat produced waters called UTMDIF, was designed, installed and operated in an industrial plant for treatment of effluents from oil industry. This unit operates by means of the method of separation of phase inversion and can become a promising alternative to solve the problem of oil/water separation. This method constitutes the basis of the working of a new design of mixersettler of vertical configuration which occupies small surface area. The last characteristic becomes specially important when there is limitation on the lay-out of the plant, for example, over maritime platforms to explore oil. This equipment in a semi-industrial scale treats produced wastewaters contaminated with oil at low concentrations (ranging from 30 to 150 mg/L) and throughputs of 320 m3/d (47,4 m3 m-2 h-1). Good results were obtained in oil/water separation which leads to the necessary specification to discharge those wastewaters. Besides, the non dependence of the efficiency of separation in spite of the salinity of the medium becomes the equipment an attractive new technology to treat wastewaters containing oil at low concentrations

Características biológicas do solo indicadoras de qualidade após dois anos de aplicação de biossólido industrial e cultivo de milho

A utilização agrícola de biossólidos tem sido muito incentivada, mas, como esses resíduos apresentam composição química variada, o valor agronômico e os efeitos sobre características indicadoras de qualidade do solo precisam ser avaliados caso a caso, a fim de estabelecer normas de segurança para uso desses materiais. Neste trabalho foram avaliadas características biológicas, após a aplicação, por dois anos consecutivos, de doses crescentes (0, 6, 12, 18 e 24 t ha-1 base seca) de um biossólido gerado por uma indústria de fibras e resinas PET e da adubação mineral completa no cultivo de milho, em um Cambissolo distrófico, comparados aos de uma área adjacente, sob Brachiaria sp. e sem cultivo nos últimos 10 anos, usada como referência. Os valores de C e N da biomassa microbiana, a respiração basal e as atividades das enzimas urease e beta-glicosidase e da hidrólise do diacetato de fluoresceína (FDA) aumentaram, enquanto a atividade da fosfatase ácida diminuiu com a elevação das doses de biossólido, porém estas não tiveram efeito sobre o quociente metabólico (qCO2). A diminuição da atividade da fosfatase se deveu ao aumento da disponibilidade de P no solo, não caracterizando efeito adverso da aplicação do biossólido. Com aplicação de 12 t ha-1 de biossólido (recomendação agronômica), a respiração e a hidrólise da FDA foram maiores e a atividade da fosfatase foi menor que a obtida no solo com adubação mineral, mas as demais características avaliadas não diferiram entre estes tratamentos. A colonização micorrízica de Brachiaria sp. não diferiu entre plantas de crescimento espontâneo nas parcelas anteriormente cultivadas com milho e aquelas da área adjacente. Apesar do menor número de esporos, verificou-se enriquecimento de espécies de fungos micorrízicos arbusculares (FMAs) nas parcelas cultivadas. O carbono orgânico (Corg) e a biomassa microbiana apresentaram alta correlação com os demais parâmetros avaliados, indicando que as alterações na quantidade e qualidade da matéria orgânica, promovidas pela aplicação do biossólido, refletiram na dinâmica da microbiota e influenciaram positivamente os parâmetros biológicos de qualidade do solo.

Influência das temperaturas mínima e máxima em características de qualidade industrial e em rendimentos de grãos de trigo

Na região tritícola sul-brasileira predominam invernos com temperatura baixa (mínima absoluta, em dias com geada, de até - 8,0ºC). No entanto, a incidência de elevada temperatura (máxima absoluta, em dias isolados entre outubro e novembro, de até 41,0ºC) pode ser encontrada durante todo o período de enchimento de grãos e na maturação fisiológica. Este trabalho teve por objetivos verificar a influência das temperaturas mínima e máxima na qualidade industrial e no rendimento de grãos. Foram usados dados de experimentos com trigo Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 16, conduzidos nos anos de 1990 a 1998, em sete locais do Rio Grande do Sul e em quatro locais de Santa Catarina. A análise estatística realizada foi correlações múltiplas. Verificou-se que, nos diferentes períodos analisados: a) o aumento da temperatura máxima média resultou em acréscimo do peso de mil grãos, do rendimento de grãos, da força geral de glúten, da microssedimentação com dodecil sulfato de sódio e do número de queda: b) o peso do hectolitro (exceção feita ao período final de maturação fisiológica), o peso de mil grãos, o número de queda e a extração experimental de farinha foram influenciados negativamente pela temperatura mínima média; c) a temperatura mínima média influenciou positivamente a força geral de glúten, a relação P/L e a microssedimentação com dodecil sulfato de sódio.

Simulação da dinâmica operacional de uma linha industrial de abate de suínos

Este trabalho teve como objetivo implementar um modelo computacional para simular a dinâmica operacional de uma linha industrial de abate de suínos. O sistema real modelado pertence à empresa Frigorífico Frimesa, sediada no município de Medianeira (PR). O modelo implementado é tipo dinâmico, discreto e estocástico. Este simula 34 operações unitárias e foi estruturado com o uso da linguagem de simulação EXTEND TM. Para validação do modelo foram coletados dados relativos a cinco dias de operação, em que foram abatidos 1.346, 1.630, 1.360, 1.585 e 1.550 suínos, respectivamente. Como parâmetros de comparação entre os dados obtidos a partir do sistema e gerados pelo modelo foram selecionadas as seguintes variáveis: (i) tempo de duração da operação; (ii) tempo de deslocamento da insensibilização até a depiladeira; (iii) tempo deslocamento da insensibilização até a câmara fria; (iv) número de carcaças re-inspecionadas; e (v) número final de carcaças. Na validação do modelo, foi constatado que, para a variável tempo de duração da operação por meio do teste Tukey a 1% de significância, não foram detectadas diferenças estatísticas entre os valores obtidos do sistema real e os gerados pelo modelo. Considerando-se esta e outras análises, foi concluído que o modelo aplica-se à finalidade para a qual foi implementado. Sendo assim, foram realizadas duas análises de sensibilidade. Na primeira, ao alterar o número de suínos a abater de 1 mil para 2 mil, foi determinado que os tempos de duração da operação variariam de 6,20 a 10,10 h, respectivamente. Para a segunda, ao abater 1.340 suínos e alterar a velocidade das nórias de 300 para 600 animais por hora, o tempo de duração da operação passou de 8,10 para 7,40 h, respectivamente.

Imageamento Elétrico 3D em área contaminada por hidrocarbonetono polo industrial de Cubatão - SP

Este trabalho mostra os resultados obtidos com ensaios geofísicos realizados em uma área contaminada por hidrocarboneto no Polo Industrial de Cubatão - São Paulo, com objetivo de caracterizar as anomalias geoelétricas associadas à presença dos hidrocarbonetos, bem como delimitar e cubar tais anomalias. Para tanto, utilizou-se o método da eletrorresistividade, por meio das técnicas de Sondagem Elétrica Vertical (SEV) e Imageamento Elétrico 3D. Os resultados obtidos permitem indicar que a presença de hidrocarboneto está associada a anomalias condutivas devido aos produtos da biodegradação. As anomalias condutivas ocorrem de forma disseminada na área, totalizando um volume de 1365,3 m³; entretanto, este volume corresponde somente à presença de contaminante em fase residual.

Radionuclides, heavy metals and fluorine incidence at Tapira phosphate rocks, Brazil, and their industrial (by) products

Inorganic phosphate fertilizers may contain radionuclides, heavy metals and fluorine. This paper presents the possible environmental hazards from Tapira phosphate rocks and their (by) products (Brazil) utilized as phosphate fertilizers. The activity concentration of U-238, U-234, Ra-226 and K-40 in Tapira phosphate rocks is within the world range for these rock types. The Th-232 activity concentration is higher than the mean reported in phosphate rocks. A value of 2184 nGy h(-1) was obtained for the exposure dose rate in Tapira phosphate deposit area, which is indicative of a high background radiation area. The flotation-separation process causes the incorporation of no more than 9%, 11 % and 24% of radionuclides, heavy metals and fluorine, respectively, into the phosphate concentrate. The radionuclides and heavy metals existing in phosphate fertilizers applied in Brazilian crops according to the recommended rates, do not raise their concentration in soils to harmful levels. (C) 2005 Elsevier Ltd. All rights reserved.

Wet deposition of major ions in a rural area impacted by biomass burning emissions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evolucao e perspectivas da geografia industrial no Brasil

Tries to develop both an evolutional analysis and a critical appraisal of Brazilian industrial geography. This is a little-explored area in Brazil, as geographers have tended to focus on local and regional studies, rather than pursuing a holistic view of the national industrial system. Also notes the continuing dependence on the theoretical and methodological basis of work produced by capitalist developed countries. -from English summary

Hydrochemistry on a waste disposal area of sand mining activities at Analandia, Sao Paulo State, Brazil, and their implications on the mobilization of uranium

Groundwaters and surface waters from an area of treatment of sand for industrial purposes at Analandia municipality, nearly in the center of Sao Paulo State, Brazil, were chemically and isotopically analyzed with two aims: to evaluate if the anthropogenic activities that has taken place for the last 6 years is affecting the quality of the hydrological resources and to relate the hydrogeochemical behaviour of the uranium isotopes 234U and 238U with the pattern of circulation of groundwaters.

Evaluating quality of life in mercury intoxicated people in urban-industrial environments through short-form 36 application

Context and objective: Records of contact with mercury (Hg) exist for more than 3500 years and several problems related to the use of this element can be noticed. Considering inexistence of current reports about it, quality of life perception evaluation was studied in people chronically intoxicated by mercury in an industrial environment. Design and setting: This is a cross-sectional descriptive observational study. Information from 47 urban-industrial workers from lamps manufacturing in São Paulo, clinically diagnosed as intoxicated by mercury and currently followed by the Occupational Health Service of Faculdade de Medicine da Universidade de São Paulo, with average age of 41.7 years old, was considered. Methods: SF36 questionnaire application was performed, with inferences tested by χ-square proof, by Spearman linear correlation and Mann-Whitney non-parametric test, adopting p < 0.05 as significant level. Results: In the eight domains, observed medians are 40% for physical functioning; 0 for physical function; 30% for body pain; 30% for general health; 22.2% for vitality; 50% for social functioning; 0 for emotional role and 36% for mental health. Correlation between age and SF36 domains does not reveal statistical significance, except for physical functioning, indicating that lower scores presented by older people in this domain are not followed by changes on other ones. Conclusions: Values obtained in people chronically intoxicated by mercury are actually lower, in the motor and mental scope components. Some instruments domains are higher for men than for women. Older ages are inversely associated to good performance in physical function domain. © Copyright Moreira Jr. Editora. Todos os direitos reservados.

Atributos químicos e físicos de um solo tratado com biossólido industrial e cultivado com milho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Evaluation of neighborhood impacts caused by companies of the high-tech industrial cluster of São Carlos, SP, Brazil

The purpose of this study was to develop a methodology for evaluating neighborhood impacts using a Geographic Information System (GIS) and to apply the procedures to the companies of the High-Technology Industrial Cluster of São Carlos. To this end, an evaluation was made of the neighborhood impacts on the physical environment, urban components, quality of life, and urban infrastructure using impact matrices, and the impacts were assigned scores according to type, order, magnitude and duration. Fifty one companies were examined based on data provided by the companies themselves and on field surveys. The impacts are represented spatially in proportional symbols maps, based on the spatial distribution of the companies in the urban area of the city of São Carlos and the areas of influence of each company. The application of the proposed methodology served to validate it and indicated that the neighborhood impacts caused by the companies of this study are related to each company's type of activity, its size, and its occupation of the area. © 2008 Journal of Urban and Environmental Engineering (JUEE). All rights reserved.