Changes in the prevalence, incidence and residual risk for HIV and hepatitis C virus in Southern Brazilian blood donors since the implementation of NAT screening

Introduction Previous studies have shown high residual risk of transfusing a blood donation contaminated by human immunodeficiency virus (HIV) or hepatitis C virus (HCV) in Brazil and motivated the development of a Brazilian platform for simultaneous detection of both viruses by nucleic acid amplification test (NAT) denominated HIV/HCV Bio-Manguinhos/Fundação Oswaldo Cruz (FIOCRUZ). The objective of this study was to verify seroprevalence, incidence and residual risk for both viruses before and after the implementation of NAT. Methods Over 700,000 blood samples from all blood banks in the southern Brazilian State of Santa Catarina were analyzed during the period between January 2007 and July 2013. Results Compared with the period preceding the NAT screening, HIV prevalence increased from 1.38 to 1.58 per 1,000 donors, HIV incidence rate increased from 1.22 to 1.35 per 1,000 donor-years, and HIV residual risk dropped almost 2.5 times during the NAT period. For HCV, seroprevalence increased from 1.22 to 1.35 per 1,000 donors, incidence dropped from 0.12 to 0.06 per 1,000 donor-years, and residual risk decreased more than 3 times after the NAT implementation. Conclusions NAT reduced the duration of the immunologic window for HIV and HCV, thus corresponding to approximately 2.5- and 3-fold respective residual risk reductions.

Implementation of a zebrafish health program in a research facility : A 4-year retrospective study

In the past two decades, zebrafish (Danio rerio)-based research has contributed to significant scientific advances. Still, husbandry and health programs did not evolve at the same pace, as evidenced by the absence of general guidelines. Health monitoring is essential to animal welfare, to permit animal exchanges across facilities, to contribute to robust experimental results, and for data reproducibility. In this study, we report a health program implemented in a zebrafish research facility to prevent, monitor, and control pathogen, and disease dissemination. This program includes quarantine, routine health screening of sentinels, and nonroutine screenings of retired animals and sick/moribund individuals. An extensive list of clinical signs, lesions, and pathogens was monitored based on: daily observation of fish, necropsy, histology, and bacterial culture. The results indicate that the combined analysis of sentinels with the evaluation of sick/moribund animals enables a comprehensive description not only of pathogen prevalence but also of clinical and histopathologic lesions of resident animals. The establishment of a quarantine program revealed to be effective in the reduction of Pseudoloma neurophilia frequency in the main aquaria room. Finally, characterization of the colony health status based on this multiapproach program shows a low prevalence of lesions and pathogens in the facility.

Dengue in Brazil and Colombia: a study of knowledge, attitudes, and practices

Introduction This study was conducted in Brazil and Colombia,where dengue is endemic and vector control programs use chemical insecticides. Methods We identified knowledge, attitudes, and practices about dengue and determined the infestation levels of Aedes aegypti in one Brazilian and four Colombian communities. Results The surveys show knowledge of the vector, but little knowledge about diagnosis, prognosis, and treatment. Vector infestation indices show Brazil to have good relative control, while Colombia presents a high transmission risk. Conclusions Given the multidimensionality of dengue control, vertical control strategies are inadequate because they deny contextualized methods, alternative solutions, and local empowerment.

Implementation of membrane processes for improvement of the detection of food contaminants

The EM3E Master is an Education Programme supported by the European Commission, the European Membrane Society (EMS), the European Membrane House (EMH), and a large international network of industrial companies, research centres and universities (http://www.em3e.eu)

Implementation of WHO Quality Rights assessment in Kabul Mental Health Hospital

RESUMO: Objetivo Avaliar a qualidade dos serviços de saúde mental e a situação dos direitos humanos no Hospital de Saúde Mental de Kabul (KMHH) e fornecer recomendações para o desenvolvimento de um plano de melhoria, actualização e revisão da Política, Estratégia e Plano Nacionais de Saúde Mental,. Métodos A avaliação foi realizada em Janeiro de 2015 no KMHH e na Burn Ward do Hospital Terciário de Isteqlal por uma equipa multidisciplinar usando Qualidade Direitos Tool Kit da OMS. Antes da avaliação, o protocolo foi aprovado pelo Institutional Review Board e obtido o consentimento informado de cada entrevistado. Realizaram-se entrevistas com 16 utentes do serviço, 17 funcionários do hospital e 7 familiares, além da revisão de documentos e da observação das unidades de internamento do KMHH e das interações interpessoais entre funcionários do hospital e utentes do serviço. A comissão de avaliação reviu também a documentação e observou a Unidade de Queimados do Hospital Terciário de Isteqlal, a fim de avaliar e comparar a paridade entre as duas instalações. Após a avaliação, todos os membros da comissão se reuniram e puseram em conjunto todas as conclusões num relatório final. Resultados Encontrámos algumas lacunas graves no nível de prestação de serviços e no respeito pelos direitos humanos dos utentes dos serviços e dos seus familiares. Uma série de políticas, diretrizes e procedimentos relacionados com os direitos humanos dos pacientes estavam ausentes. O ambiente terapêutico e o padrão de vida eram inadequados, existia má qualidade do atendimento e dos serviços prestados, os utilizadores enfrentavam violações do direito ao exercício da capacidade legal e da liberdade pessoal, eram quimica e fisicamente (uso de correntes) contidos e expostos a abusos verbais, físicos e emocionais, e havia grande ênfase no tratamento institucional. Todos estes aspectos foram considerados como extensa violação dos direitos humanos dos utentes de serviço do KMHH. Conclusão Os serviços disponíveis para utentes dos serviços de saúde mental apresentam alguns problemas devido à desconfiança e falta de consciencialização sobre os direitos das pessoas com doença mental e precisam ser alterados de forma positiva. A Lei de Saúde Mental existente difere muito das recomendações da Convenção sobre os Direitos das Pessoas com Incapacidades (CRPD) e requer revisão e adaptação de acordo com esta Convenção. -------------------------------- ABSTRACT: Objective To assess the quality of mental health services and human rights condition in the Kabul Mental Health Hospital (KMHH) and provide recommendations for development of an improvement plan and to update and revise the National Mental Health Policy, Strategy and Plan. Methods The assessment was conducted in January 2015 in the KMHH and the Burn Ward of Isteqlal Tertiary Hospital by a multidisciplinary team using WHO Quality Rights Tool Kit. Before the assessment, Institutional Review Board approval and informed consent from each interviewee were obtained. Interviews were conducted with 16 service users, 17 hospital staffs and 7 family members in addition to documents review and observation of inpatient units of KMHH plus interpersonal interactions between hospital staff and service users. The assessment committee reviewed the documentation and observed the Burn Ward of Isteqlal Tertiary hospital in order to measure and compare parity between the two facilities. After the assessment, all committee members gathered and synchronized all findings into a final report. Results There were some serious gaps on service provision level and respecting human rights of service users and their family members. A series of policies, guidelines and procedures related to patients’ human rights were absent. Inadequate treatment environment and standard of living, poor quality of care and services, violations of the right to exercise legal capacity and personal liberty, being chemically and physically (e.g. chain) restrained, being exposed to verbal, physical and emotional abuse, and emphasis on institutional treatment were all extensive human rights violation that service users were experiencing in KMHH. Conclusion The available services for mental health service users are questionable due to mistrust and lack of awareness about rights of people with disabilities and need to be positively changed. Existing Mental Health Act has a large number of disparities with the CRPD and requires revision and adaptation in accordance to CRPD.

Design and implementation of an assurance map at Sonae retail business

The present Working Project aims at studying the topic of assurance mapping in a specific organizational context of a Portuguese retail company. For this purpose, an assurance map framework was designed to support the decision making process of stakeholders, through the delivery of comfort concerning risks, operations and control. In the end, the framework was successfully implemented for the process sourcing of goods in two business units of the company. Although, further implementation of the framework proved not to be feasible during the project’s timespan, it is expected to occur in the near future.

Implementation of a probabilistic based framework for safety assessment of existing timber elements

The assessment of existing timber structures is often limited to information obtained from non or semi destructive testing, as mechanical testing is in many cases not possible due to its destructive nature. Therefore, the available data provides only an indirect measurement of the reference mechanical properties of timber elements, often obtained through empirical based correlations. Moreover, the data must result from the combination of different tests, as to provide a reliable source of information for a structural analysis. Even if general guidelines are available for each typology of testing, there is still a need for a global methodology allowing to combine information from different sources and infer upon that information in a decision process. In this scope, the present work presents the implementation of a probabilistic based framework for safety assessment of existing timber elements. This methodology combines information gathered in different scales and follows a probabilistic framework allowing for the structural assessment of existing timber elements with possibility of inference and updating of its mechanical properties, through Bayesian methods. The probabilistic based framework is based in four main steps: (i) scale of information; (ii) measurement data; (iii) probability assignment; and (iv) structural analysis. In this work, the proposed methodology is implemented in a case study. Data was obtained through a multi-scale experimental campaign made to old chestnut timber beams accounting correlations of non and semi-destructive tests with mechanical properties. Finally, different inference scenarios are discussed aiming at the characterization of the safety level of the elements.

Assessing student individual performance within PBL teams: findings from the implementation of a new mechanism

This paper reports on the experience of the implementation of a new mechanism to assess individual student contribution within project work, where students work in teams to solve a large-scale open-ended interdisciplinary project. The study takes place at the University of Minho, with first year engineering students, enrolled in the Industrial Management and Engineering (Integrated Masters) degree. The aim of this paper is to describe the main principles and procedures underlying the assessment mechanism created and also provide some feedback from its first implementation, based on the students, lecturers and tutors perceptions. For data collection, a survey was sent to all course lecturers and tutors involved in the assessment process. Students also contributed with suggestions, both on a workshop held at the end of the project and also by answering a survey on the overall satisfaction with PBL experience. Findings show a positive level of acceptance of the new mechanism by the students and also by the lecturers and tutors. The study identified the need to clarify the criteria used by the lecturers and the exact role of the tutor, as well as the need for further improvement of its features and procedures. Some recommendations are also issued regarding technical aspects related to some of the steps of the procedures, as well as the need for greater support on the adjustment and final setting of the individual grades.

Implementation of a lean six sigma project in a production line

Companies from the motorcycles components branch are dealing with a dynamic environment, resulting from the introduction of new products and the increase of market demand. This dynamic environment requires frequent changes in production lines and requires flexibility in the processes, which can cause reductions in the level of quality and productivity. This paper presents a Lean Six Sigma improvement project performed in a production line of the company's machining sector, in order to eliminate losses that cause low productivity, affecting the fulfillment of the production plan and customer satisfaction. The use of Lean methodology following the DMAIC stages allowed analyzing the factors that influence the line productivity loss. The major problems and causes that contribute to a reduction on productivity and that were identified in this study are the lack of standardization in the setup activities and the excessive stoppages for adjustment of the processes that caused an increase of defects. Control charts, Pareto analysis and cause-and-effect diagrams were used to analyze the problem. On the improvement stage, the changes were based on the reconfiguration of the line layout as well as the modernization of the process. Overall, the project justified an investment in new equipment, the defective product units were reduced by 84% and an increase of 29% of line capacity was noticed.

Implementation of integral viscoelastic constitutive models in OpenFOAM® computational library

This work reports the implementation and verification of a new so lver in OpenFOAM® open source computational library, able to cope with integral viscoelastic models based on the integral upper-convected Maxwell model. The code is verified through the comparison of its predictions with analytical solutions and numerical results obtained with the differential upper-convected Maxwell model

A new competitive implementation of the electromagnetism-like algorithm for global optimization

The Electromagnetism-like (EM) algorithm is a population- based stochastic global optimization algorithm that uses an attraction- repulsion mechanism to move sample points towards the optimal. In this paper, an implementation of the EM algorithm in the Matlab en- vironment as a useful function for practitioners and for those who want to experiment a new global optimization solver is proposed. A set of benchmark problems are solved in order to evaluate the performance of the implemented method when compared with other stochastic methods available in the Matlab environment. The results con rm that our imple- mentation is a competitive alternative both in term of numerical results and performance. Finally, a case study based on a parameter estimation problem of a biology system shows that the EM implementation could be applied with promising results in the control optimization area.

Towards the design and implementation of aspect-oriented programming for spreadsheets

A spreadsheet usually starts as a simple and singleuser software artifact, but, as frequent as in other software systems, quickly evolves into a complex system developed by many actors. Often, different users work on different aspects of the same spreadsheet: while a secretary may be only involved in adding plain data to the spreadsheet, an accountant may define new business rules, while an engineer may need to adapt the spreadsheet content so it can be used by other software systems.Unfortunately,spreadsheetsystemsdonotoffermodular mechanisms, and as a consequence, some of the previous tasks may be defined by adding intrusive “code” to the spreadsheet. In this paper we go through the design and implementation of an aspect-oriented language for spreadsheets so that users can work on different aspects of a spreadsheet in a modular way. For example, aspects can be defined in order to introduce new business rules to an existing spreadsheet, or to manipulate the spreadsheet data to be ported to another system. Aspects are defined as aspect-oriented program specifications that are dynamically woven into the underlying spreadsheet by an aspect weaver. In this aspect-oriented style of spreadsheet development, differentusers develop,orreuse,aspects withoutaddingintrusive code to the original spreadsheet. Such code is added/executed by the spreadsheet weaving mechanism proposed in this paper.

BIOMedical search engine framework: lightweight and customized implementation of domain-specific biomedical search engines

The Smart Drug Search is publicly accessible at http://sing.ei.uvigo.es/sds/. The BIOMedical Search Engine Framework is freely available for non-commercial use at https://github.com/agjacome/biomsef

Implementation of the I.S. EN 16001:2009 energy management standard into GlaxoSmithKline (GSK) Ltd, Cork

As manufacturers face an increasingly competitive environment, they seek out opportunities to reduce production costs without negatively affecting the yield or the quality of their finished products. The challenge of maintaining high product quality while simultaneously reducing production costs can often be met through investments in energy efficient technologies and energy efficiency practices. Energy management systems can offer both technological and best practice efficiencies in order to achieve substantial savings. A strong energy management system provides a solid foundation for an organisation to reduce production costs and improve site efficiency. The I.S EN16001 energy management standard specifies the requirements for establishing, implementing, maintaining and improving an energy management system and represents the latest best practice for energy management in Ireland. The objective of the energy management system is to establish a systematic approach for improving energy performance continuously. The I.S EN16001 standard specifies the requirements for continuous improvement through using energy more efficiently. The author analysed how GlaxoSmithKline’s (GSK) pharmaceutical manufacturing facility in Cork implemented the I.S. EN16001 energy management system model, and defined how energy saving opportunities where identified and introduced to improve efficiency performance. The author performed an extensive literature research in order to determine the current status of the pharmaceutical industry in Ireland, the processes involved in pharmaceutical manufacturing, the energy users required for pharmaceutical manufacturing and the efficiency measures that can be applied to these energy users in order to reduce energy consumption. The author then analysed how energy management standards are introduced to industry and critically analysed the driving factors for energy management performance in Ireland through case studies. Following an investigation as to how the I.S. EN16001 energy management standard is operated in GSK, a critical analysis of the performance achieved by the GSK energy management system is undertaken in order to determine if implementing the I.S EN16001 standard accelerates achieving energy savings. Since its introduction, the I.S. EN16001 model for energy management has enabled GSK to monitor, target and identify energy efficiency opportunities throughout the site. The model has put in place an energy management system that is continuously reviewed for improvement and to date has reduced GSK’s site operations cost by over 30% through technical improvements and generating energy awareness for smarter energy consumption within the GSK Cork site. Investment in I.S. EN16001 has proved to be a sound business strategy for GSK especially in today's manufacturing environment.

Implementation of a customer relationship management system in an SME

The research conducted for this thesis has been carried out over a two year period as part of the Mobile Tools and Technology for customer care (MOTTO) project. The project was funded under the Applied Grant scheme administered by Enterprise Ireland and Nortel Networks Ltd. It was a partnership project between Galway-Mayo Institute of Technology, University of Limerick, National University of Ireland Galway, and a global Internet and communications company, Nortel Networks. The project aimed to investigate the enabling mobile communications technologies in e-Business and mobile communications in the area of Business-to-Business (B2B) customer care. The development of the application discussed in this thesis was developed in conjunction with the Galway-Mayo Institute of Technology, University of Limerick and AMT Ireland. The decision to develop the application in the Electronics Company of AMT in Limerick came about as a result of the contact established by Mark Southern from the University of Limerick. Mark was involved in overseeing the development and assisted in establishing the user requirements.