Genetic diversity and relationships in accessions from different cultivar groups and origins in the tree tomato (Solanum betaceum Cav.)

Abstract Tree tomato (Solanum betaceum) is an Andean small tree cultivated for its juicy fruits. Little information is available on the characterization of genetic resources and breeding of this neglected crop. We have studied the molecular diversity with AFLP markers using 11 combinations of primers of a collection of 25 S. betaceum accessions belonging to four cultivar groups, most of which had been previously morphologically characterized, as well as one accession of the wild relative S. cajanumense.Atotal of 197 AFLP fragments were scored, of which 84 (43 %) were polymorphic. When excluding S. cajanumense from the analysis, the number of polymorphic AFLP fragments was 78 (40 %). Unique AFLP fingerprints were obtained for every accession, but no AFLP fragments specific and universal to any of the four cultivar groups were found. The total genetic diversity (HT) of cultivated accessions was HT = 0.2904, while for cultivar groups it ranged from HT = 0.1846 in the orange group to HT = 0.2498 in the orange pointed group. Genetic differentiation among cultivar groups (GST) was low (GST = 0.2248), which was matched by low values of genetic distance among cultivar groups. The diversity of collections from Ecuador, which we hypothesize is a center of diversity for tree tomato, was similar to that from other origins (HT = 0.2884 and HT = 0.2645, respectively). Cluster and PCoA analyses clearly separated wild S. cajanumense from the cultivated species. However, materials of different cultivar groups and origins were intermingled in both analyses. The Mantel test correlation coefficient of the matrices of morphological and AFLP distances was low (-0.024) and non-significant. Overall, the results show that a wide diversity is present in each of the cultivar groups, indicate that Ecuador may be regarded as a center of accumulation of diversity for this crop, and confirm that AFLP and morphological characterization data are complementary. The results obtained are of value for the conservation of genetic resources and breeding of tree tomato, as an assessment of the genetic diversity and relationships among differen

Identificación de áreas prioritarias para la conservación de razas de maíz en la sierra de Ecuador

En Ecuador el maíz es el cultivo más importante en superficie y es base de la alimentación para la población rural que vive en los Andes. A diferencia de lo que sucede en la Costa, en la región Sierra todavía se cultivan numerosas variedades tradicionales que se agrupan en veinticuatro razas. Mantener esta diversidad es, pues, de gran importancia no solo para la seguridad alimentaria, sino también como fuente de genes para tolerancia a factores abióticos que podrían ser incorporados a las variedades modernas. Si bien parte de esta diversidad fue recolectada a mediados del siglo pasado y está siendo conservada en distintos bancos de germoplasma, es deseable que su conservación in situ también esté asegurada, entre otras razones, porque de esta manera el cultivo puede seguir evolucionando. Para poder implementar un plan de conservación en finca que contribuya a preservar este patrimonio, resulta imprescindible identificar áreas idóneas donde concentrar los recursos y conocer las características y tipologías de los agricultores que manejan la diversidad actual. Generar esta información es el objetivo principal de esta investigación y para lograrlo se han llevado a cabo cuatro estudios: (1) Análisis de la diversidad a nivel de razas e identificación de áreas de alta riqueza de razas, alta diversidad morfológica y/o alta diversidad ecogeográfica en la Sierra de Ecuador, (2) Identificación del perfil y las características de los agricultores que conservan y manejan las variedades tradicionales de maíz en la Sierra de Ecuador, (3) Análisis del conocimiento local, manejo y usos de variedades tradicionales de maíz en la Sierra de Ecuador, y (4) Identificación de áreas de alta diversidad y bajo riesgo de pérdida para la conservación en finca de maíz en la Sierra de Ecuador. Para el primer estudio se visitaron 303 fincas distribuidas a lo largo de la Sierra y se recolectaron 636 muestras que fueron caracterizadas morfológicamente mediante 14 variables: 8 relacionadas con la mazorca (forma, longitud y diámetro de la mazorca, color y diámetro de olote y número y disposición de hileras) y 7 referidas el grano (número total de granos, color, forma, longitud, anchura y grosor de grano y tipo de endospermo). Adicionalmente, las fincas donde se tomaron las muestras fueron caracterizadas ecogeográficamente mediante 5 variables climáticas (temperatura media estacional, rango de temperatura media anual, temperatura mínima de diciembre, precipitación estacional y precipitación de octubre), 2 geofísicas (altitud y pendiente) y 5 edáficas (textura principal del suelo, profundidad a roca, pH, contenido en materia orgánica y fertilidad). A partir de esta información y mediante técnicas de sistemas de información geográfica (SIG), se generaron mapas de distribución por raza en formato vectorial y un mapa de riqueza de razas, un mapa de diversidad morfológica y un mapa de diversidad ecogeográfica en formato ráster con celdas de 10 km x 10 km. Los resultados permitieron constatar que, en los últimos 60 años, no se ha perdido ninguna raza. Sin embargo, Canguil, Chaucho y Clavito han dejado de cultivarse en algunas provincias con la consiguiente erosión genética del cultivo. La caracterización morfológica detectó diferencias en el grado de variabilidad intra-raza, siendo Patillo Ecuatoriano, Racimo de Uva y Uchima las razas más heterogéneas tanto para los caracteres cualitativos como cuantitativos. A nivel climático y geofísico, también se detectaron diferencias en el grado de variación intra-raza; Cuzco Ecuatoriano, Kcello Ecuatoriano y Montaña Ecuatoriana fueron las razas que en promedio presentaron mayores rangos y coeficientes de variación para estas variables ecogeográficas. En cuanto a las condiciones edáficas todas las razas, excepto Cónico Dentado, presentaron una gran heterogeneidad, pudiendo crecer tanto en suelos ricos como pobres, con valores de pH entre ácido y moderadamente alcalino. La comparación entre razas reveló diferencias significativas en los rangos ambientales de algunas razas como Cónico Dentado, que tiende a cultivarse a menor altitud y, por tanto, en ambientes menos fríos y de mayor precipitación que Blanco Blandito, Patillo Ecuatoriano, Sabanero Ecuatoriano, Uchima y Zhima. Para la mayoría de las razas se encontraron materiales potencialmente adaptados a condiciones de estrés (precipitación estacional inferior a 500 mm y suelos con pH entre 4.5 y 5.5). Finalmente, los mapas de riqueza, de diversidad morfológica y de diversidad ecogeográfica mostraron 36 celdas de alta diversidad repartidas en las 10 provincias de la Sierra: 11 celdas en las provincias del norte, 11 en las provincias del centro y 14 en las provincias del sur. Para la caracterización e identificación de las tipologías de los agricultores que cultivan maíz en la Sierra de Ecuador y el análisis de los posibles factores de riesgo de pérdida de diversidad, se realizaron entrevistas individuales y semiestructuradas a los agricultores dueños de las fincas donde se recolectaron las muestras para el estudio de diversidad (254 en total). Las preguntas que se formularon (11 abiertas y 5 cerradas) estuvieron organizadas en seis bloques: datos del agricultor, características de la finca, diversidad y conocimiento del cultivo, manejo del cultivo, usos y flujo de semillas. Los resultados indicaron que la diversidad de maíz que hay en la Sierra de Ecuador es manejada mayoritariamente por agricultores mestizos, de entre 30 y 55 años, que cultivan una o dos variedades tradicionales para autoconsumo, en parcelas de menos de 0.5 ha y en asocio con fréjol. El análisis de segmentación mediante el algoritmo Chi-square automatic interaction detection (CHAID) permitió identificar un pequeño grupo de agricultores indígenas con parcelas medianas (entre 0.5 ha y 1.5 ha) que conservan un mayor número de variedades tradicionales por finca que el agricultor promedio. Los análisis estadísticos no detectaron diferencias significativas entre etnias (mestizo vs. indígena), géneros (hombre vs. mujer) y grupos de edad (jóvenes menores de 30 años, adultos entre 30 y 55 años y adultos mayores de 55 años) en lo que respecta al conocimiento del cultivo (criterios de reconocimiento y razones de preferencia) y manejo (tipo de cultivo), pero sí detectaron diferencias entre regiones, principalmente en el modo de cultivar el maíz; mientras que en el norte y sur tienden a sembrarlo en asocio y con un mayor número de especies, en el centro acostumbran a cultivarlo preferentemente solo. En cuanto a los usos, se recopilaron hasta 39 modos diferentes de consumir maíz, siendo Kcello Ecuatoriano y Zhima las razas para las que se registró un mayor número de usos. La comparación del número medio de usos por variedad entre etnias evidenció que los agricultores mestizos utilizan sus variedades tradicionales de forma más variada que los indígenas. Entre los factores de riesgo que se analizaron, el bajo porcentaje de jóvenes agricultores que se ocupan de las fincas podría suponer una amenaza a medio plazo por falta de relevo generacional. Adicionalmente, las numerosas sinonimias y homonimias que se detectaron y el bajo intercambio de semillas también podrían ser causa de pérdida de diversidad, bien por reemplazo o por envejecimiento de la semilla. Finalmente, se concluyó que las razas Chaucho, Complejo Chillo-Huandango, Complejo Mishca-Huandango, Cónico Dentado, Montaña Ecuatoriana y Sabanero Ecuatoriano son particularmente vulnerables, no solo por su baja presencia, sino también por el color de grano que tienen (los mismos que la mayoría de las razas más comunes) y carecer de nombres y usos específicos. Finalmente, para la priorización de áreas de conservación en finca para maíz en la Sierra de Ecuador, se utilizaron 13 criterios de diferente naturaleza: 2 ecogeográficos (precipitación, diversidad ecogeográfica), 6 biológicos (grado de presencia del cultivo, riqueza de razas, diversidad morfológica, presencia de mezclas, presencia de razas locales y riesgo de erosión genética), 3 culturales (abundancia de variedades por finca, diversidad de usos y frecuencia de intercambio) y 2 demográficos (tamaño de la población y distancia a núcleos urbanos). Mediante técnicas SIG y de evaluación multicriterio, los valores originales de las capas-criterio fueron transformados a una escala de 0 a 100. Posteriormente, las capas-criterio normalizadas fueron sumadas utilizando tres métodos de ponderación: (1) mismo peso, (2) diferente peso según la puntuación otorgada por 72 expertos, y (3) diferente peso según el método de comparación entre pares de criterios. Los resultados permitieron identificar ocho celdas de 10 km x 10 km con alta puntuación (> 65): tres celdas en el norte (una en cada una de las provincias), una celda en el centro (en la provincia de Cotopaxi), y cuatro celdas en la región sur (dos en Azuay y otras dos en Loja). ABSTRACT In Ecuador, the maize is the most important cultivation in surface and it is a base of the feeding for the rural population who lives in the Andes. In contrast to what it happens on the Coast, in the Sierra region still there are cultivated numerous traditional varieties that are grouped into twenty-four races. Maintaining this diversity is, therefore, of great importance not only for food security, but also as a source of genes for tolerance to abiotic factors could be incorporated into modern varieties. Although part of this diversity was collected in the middle of the last century and is still preserved in various germplasm banks, it is desirable for the in situ conservation also is assured, among other reasons, because in this way the crop can continue to evolve. To be able to implement a conservation plan on farm that contribute to preserving this heritage, it is essential to identify suitable areas where to concentrate resources and know the characteristics and typology of farmer who managed the current diversity. To generate this information is the main target of this investigation and to achieve this, four studies have been carried out: (1) Analysis of the diversity at races and identification of areas of high richness of races, high morphological diversity and / or ecogeographical high diversity in the Sierra of Ecuador, (2) Identification of the profile and characteristics of farmers who conserve and manage traditional varieties of maize in the Sierra of Ecuador, (3) Analysis of local knowledge, management and use of traditional varieties of maize in the Sierra of Ecuador, and (4) Identification of areas of high diversity and low risk of loss for the conservation of maize in the Sierra of Ecuador. For the first study were visited 303 farms distributed along the Sierra and collected 636 samples that were characterized morphologically by 14 variables: 8 related to the ear (shape, length and diameter of the cob, colour, and diameter of cob and number and arrangement of rows) and 7 referred to the grain (total number of grain, colour, shape, length, width, and thickness and type of grain endosperm). In addition, the farms where the samples were taken were characterized ecogeographically through 5 climatic variables (seasonal average temperature, range of average annual temperature, minimum temperature for December, seasonal precipitation and precipitation of October), 2 geophysical (altitude and slope) and edaphic 5 (main texture of the soil, deep rock, pH, content of organic matter and fertility). From this information and techniques of geographic information systems (GIS), maps were generated for distribution by race in vector format and a map of richness of races, a map of morphological diversity and a map of ecogeographical diversity in raster format with cells of 10 km x 10 km. The results allowed observing that, over the past 60 years, it has not lost any race. Nevertheless, Canguil, Chaucho and Clavito have stopped being cultivated in some provinces with the consequent genetic erosion of the cultivation. The morphological characterization detected differences in the degree of variability intra-race, being Patillo Ecuatoriano, Racimo de Uva and Uchima races more heterogeneous both for the qualitative and quantitative characters. At climate and geophysical level, also detected differences in the degree of variation intra-race; Cuzco Ecuatoriano, Kcello Ecuatoriano and Montaña Ecuatoriana were races that, on average, showed higher ranges and coefficients of variation for these geographical characters. In terms of the edaphic conditions, all races, except Cónico Dentado, showed a great heterogeneity, and can grow both in rich and poor soils, with pH values between acid and moderately alkaline. The comparison between races revealed significant differences in the environmental ranges in some races as Cónico Dentado, which tends to be grown at lower elevations and, therefore, in environments less cold and greater precipitation than Blanco Blandito, Patillo Ecuatoriano, Sabanero Ecuatoriano, Uchima and Zhima. For most of the races were found materials potentially adapted to stress conditions (seasonal precipitation less than 500 mm and soil with a pH between 4.5 and 5.5). Finally, the maps of richness, morphologic diversity and ecogeographical diversity showed 36 cells high diversity distributed in 10 provinces of the Sierra: 11 cells in the northern provinces, 11 in the central provinces and 14 in the southern provinces. For the characterization and identification of the typology of the farmers who cultivate corn in the Sierra of Ecuador and the analysis of the possible factors of risk of loss of diversity, there were realized interviews individual and semistructured to the farmers’ owners of the farms where the samples were gathered for the study of diversity (254 in whole). The questions that were formulated (11 opened ones and 5 closed ones) were organized in six blocks: data of the farmer, characteristics of the farm, diversity and knowledge of the crop, crop management, uses and seed flow. The results indicated that the maize diversity that exist in the Sierra of Ecuador is managed mainly by mestizo farmers, aged between 30 and 55, who cultivate one or two traditional varieties for self-consumption, on plots of less than 0.5 has and in associated with beans. The segmentation analysis algorithm using the Chi-square automatic interaction detection (CHAID technique), allowed to identify a small group of indigenous farmers with medium-sized plots (between 0.5 there is and 1.5 it is) that a major number of traditional varieties preserves for farm that the average farmer. The statistical analysis did not detect significant differences between ethnic groups (mestizos vs. indigenous), genres (man vs. women) and age groups (young people under 30 years of age, adults between 30 and 55 years and adults over 55 years old) in regards to the knowledge of the cultivation (recognition criteria and reasons of preference) and management (type of crop), but if detected differences between regions, mainly on the mode of cultivating the maize; while in the north and south they tend to sow in associate and with a greater number of species, in the center accustomed to cultivate it preferably only. In regards to the uses, they were compiled up to 39 different ways of consuming maize, being Kcello Ecuatoriano and Zhima the races for which a major number of uses registered. The comparison of the average number of uses per variety between ethnic groups showed that the mestizo farmers used their traditional varieties of form more varied than the indigenous people. Between the factors of risk that were analyzed, the low percentage of young farmers who deal with the farms might suppose a medium-term threat for lack of generational relief. In addition, the numerous synonyms and homonyms that were detected and the low seed exchange could also be a cause of loss of diversity, either by replacement or by aging of the seed. Finally, it was concluded that the races Chaucho, Complex Chillo-Huandango, Complex Mishca-Huandango, Cónico Dentado, Montaña Ecuatoriana and Sabanero Ecuatoriano are particularly vulnerable, not only because of their low presence, but also by the grain color they have (the same as the majority of races more common) and lack of names and specific uses. Finally, for the prioritization of maize conservation areas on farm in the Sierra of Ecuador, used 13 criteria of different nature: 2 ecogeographic (precipitation, diversity ecogeographical), 6 biological (degree of presence of the crop, races richness, morphological diversity, the presence of mixtures, presence of local races and risk of genetic erosion), 3 cultural (abundance of varieties per farm, diversity of uses and frequency of exchange) and 2 demographic (population size and distance to urban centers). Using GIS techniques and multicriteria evaluation, the original values of the layers-criterion were transformed to a scale of 0 to 100. Later, the normalized layers - criteria were added using three weighting methods: (1) the same weight, (2) different weight according to the score given by 72 experts, and (3) different weight according to the method of comparison between pairs of criteria. The results allowed to identify eight 10 km cells x 10 km with high punctuation (> 65): three cells in the north (one in each of the provinces), a cell in the center (in the Cotopaxi province), and four cells in the south region (two in Azuay and other two in Loja).

Tuning the functional properties of Silicon Carbide Thin Film and Nanowires

The present thesis has been devoted to the synthesis and investigation of functional properties of silicon carbide thin films and nanowires. The work took profit from the experience of the research group in the synthesis of 3C-SiC from vapour phase. 3C-SiC thin films Thin films heteroepitaxy on silicon substrates was carried out in a vapour phase epitaxy reactor. The initial efforts were committed to the process development in order to enhance the crystal quality of the epi-layer. The carbonization process and a buffer layer procedure were optimized in order to obtain good quality monocrystalline 3C-SiC layers. The films characterization was used not only to improve the entire process, but also to assess the crystalline quality and to identify the defects. Methyltrichlorosilane (MTS) was introduced during the synthesis to increase the growth rate and enhance crystalline quality. The effect of synthesis parameters such as MTS flow and process temperature was studied in order to promote defect density reduction and the release of the strain due to lattice mismatch between 3C-SiC and silicon substrate. In-growth n-type doping was implemented using a nitrogen gas line and the effect of different synthesis parameters on doping level was studied. Raman measurements allowed a contactless characterization and evaluation of electrically active dopant. The effect of MTS on nitrogen incorporation was investigated and a promotion of dopant concentration together with a higher growth rate were demonstrated. This result allows to obtain higher doping concentrations without deteriorating crystal quality in 3C-SiC and, to the best of our knowledge, it has never been demonstrated before. 3C-SiC nanowires Core-shell SiC-SiO2 nanowires were synthesized using a chemical vapour deposition technique in an open tube configuration reactor on silicon substrates. Metal catalyst were used to promote a uniaxial growth and a dense bundle of nanowires 100 µm long and 60 nm thick was obtained. Substrate preparation was found to be fundamental in order to obtain a uniform nanowire density. Morphological characterization was carried out using scanning electron microscopy and the analysis of structural, compositional, optical properties is reported.

Degradação anaeróbia de fenol sob diferentes condições nutricionais

A tecnologia anaeróbia tem sido utilizada com sucesso no tratamento de água residuária contendo compostos fenólicos. Recentes pesquisas incluem tais compostos entre aqueles que podem ser degradados através desse processo. O objetivo desse trabalho foi avaliar a degradação do fenol em diferentes condições nutricionais, com ênfase na redução do sulfato. Os experimentos foram realizados com meio de cultura específico para esses microrganismos anaeróbios. Foram realizados ensaios de degradação em reatores em batelada alimentados nas seguintes condições: (1) fenol e sulfato, a diferentes concentrações, com inóculo previamente enriquecido; (2) fenol, sulfato e co-substratos e; (3) fenol, sulfato e extrato de levedura. Todos os ensaios foram realizados em temperatura de 30 graus Celsius, sob agitação de 150 rpm. Foi avaliado o consumo de fenol e sulfato e, produção de metano, em função do tempo, para diferentes concentrações iniciais de fenol e sulfato. Nos ensaios com reatores alimentados com fenol (329,3 mg/l); fenol (307,3 mg/l) e sulfato (160 mg/l); fenol (322.3 mg/l), sulfato (160 mg/l) e lactato (478,16 mg/l); fenol (332,1 mg/l), sulfato (150 mg/l) e etanol (129,76 mg/l), a remoção foi de, respectivamente, 99,8%, 98,2%, 98,8% e 98,8%. Os reatores alimentados com fenol (239,7 mg/l) obtiveram 100% de eficiência na degradação em apenas 11 dias e, os reatores alimentados com fenol (234,3 mg/l) e sulfato (162,5 mg/l) e fenol (256,0 mg/l) e sulfato (500 mg/l) tiveram eficiências de degradação de, respectivamente, 98,8% e 99,3% com 17 dias de operação. Tais eficiências foram obtidas pelo acréscimo de extrato de levedura nos reatores, no início dos ensaios. A caracterização morfológica foi realizada através de microscopia óptica. A diversidade microbiana referente aos Domínios Bacteria e Archaea, além do grupo de bactérias redutoras de sulfato foi avaliada através da técnica de PCR DGGE, onde foram observadas alterações nas populações microbianas, em função das condições nutricionais. Para o Domínio Archaea não foram observadas diferenças nos ensaios realizados. Para o Domínio Bacteria e Grupo das BRS essas diferenças foram, mais facilmente, percebidas com relação ao inóculo e entre os diversos reatores. A alteração na diversidade microbiana pode ter sido decorrente da composição do meio que, nesse caso, foi específico para BRS e a composição do inóculo que continha parte previamente adaptada às BRS. Essas condições adequadas puderam propiciar surgimento e desenvolvimento de populações microbianas capazes de degradar fenol, utilizando sulfato.

Caracterização física e química da pólvora

O presente trabalho consiste na caracterização física e química da pólvora. Esta caracterização foi realizada para alguns tipos de pólvora, com o objetivo de se poder empregar este tipo de material noutros âmbitos, que não seja só nas Forças Armadas, nomeadamente, no armamento. A caracterização física abrangeu, essencialmente, a caracterização morfológica das amostras tal-qual, nomeadamente, as pólvoras multi-perfurada, tubular, tubular (rocket), cilíndrica, esférica, lamelar, em fita e a pólvora negra. A técnica utilizada foi a observação através de uma lupa estereoscópica. Após a combustão, foi utilizado o microscópio eletrónico de varrimento. A caracterização química foi realizada no âmbito da análise química elementar, e também no âmbito da combustão, às condições atmosféricas. Na análise química elementar, foram estudadas a pólvora multiperfurada, tubular, tubular rocket e em fita, por intermédio da espectrometria de fluorescência de raios-X - dispersão de energia e por espectrometria de absorção atómica de chama. No âmbito da combustão, foram estudas a taxa de queima e a velocidade de propagação de chama, nas amostras de pólvora multi-perfurada e a pólvora de fita, através de técnicas de medição de massa e de visualização de chama. Na discussão de resultados constatou-se que a maioria dos tipos de pólvora estudados pertencem ao grupo dos propelentes de base dupla. Apesar da variabilidade entre amostras, verificou-se que o principal elemento comum é o chumbo. Quanto à taxa de queima, esta apresenta uma evolução aproximadamente linear em todas as amostras. Foi, ainda, apresentada uma velocidade de propagação de chama característica para os dois tipos de pólvora estudados, tendo sido estabelecida para a pólvora multi-perfurada uma velocidade SR = 1,1 mm/s, para em fita, SR = 6,0 mm/s.

Flexible Sensor for Wearable Vital Sign Monitoring System

In modern society, the body health is a very important issue to everyone. With the development of the science and technology, the new and developed body health monitoring device and technology will play the key role in the daily medical activities. This paper focus on making progress in the design of the wearable vital sign system. A vital sign monitoring system has been proposed and designed. The whole detection system is composed of signal collecting subsystem, signal processing subsystem, short-range wireless communication subsystem and user interface subsystem. The signal collecting subsystem is composed of light source and photo diode, after emiting light of two different wavelength, the photo diode collects the light signal reflected by human body tissue. The signal processing subsystem is based on the analog front end AFE4490 and peripheral circuits, the collected analog signal would be filtered and converted into digital signal in this stage. After a series of processing, the signal would be transmitted to the short-range wireless communication subsystem through SPI, this subsystem is mainly based on Bluetooth 4.0 protocol and ultra-low power System on Chip(SoC) nRF51822. Finally, the signal would be transmitted to the user end. After proposing and building the system, this paper focus on the research of the key component in the system, that is, the photo detector. Based on the study of the perovskite materials, a low temperature processed photo detector has been proposed, designed and researched. The device is made up of light absorbing layer, electron transporting and hole blocking layer, hole transporting and electron blocking layer, conductive substrate layer and metal electrode layer. The light absorbing layer is the important part of whole device, and it is fabricated by perovskite materials. After accepting the light, the electron-hole pair would be produced in this layer, and due to the energy level difference, the electron and hole produced would be transmitted to metal electrode and conductive substrate electrode through electron transporting layer and hole transporting layer respectively. In this way the response current would be produced. Based on this structure, the specific fabrication procedure including substrate cleaning; PEDOT:PSS layer preparation; pervoskite layer preparation; PCBM layer preparation; C60, BCP, and Ag electrode layer preparation. After the device fabrication, a series of morphological characterization and performance testing has been done. The testing procedure including film-forming quality inspection, response current and light wavelength analysis, linearity and response time and other optical and electrical properties testing. The testing result shows that the membrane has been fabricated uniformly; the device can produce obvious response current to the incident light with the wavelength from 350nm to 800nm, and the response current could be changed along with the light wavelength. When the light wavelength keeps constant, there exists a good linear relationship between the intensity of the response current and the power of the incident light, based on which the device could be used as the photo detector to collect the light information. During the changing period of the light signal, the response time of the device is several microseconds, which is acceptable working as a photo detector in our system. The testing results show that the device has good electronic and optical properties, and the fabrication procedure is also repeatable, the properties of the devices has good uniformity, which illustrates the fabrication method and procedure could be used to build the photo detector in our wearable system. Based on a series of testing results, the paper has drawn the conclusion that the photo detector fabricated could be integrated on the flexible substrate and is also suitable for the monitoring system proposed, thus made some progress on the research of the wearable monitoring system and device. Finally, some future prospect in system design aspect and device design and fabrication aspect are proposed.

Adição de resíduo cerâmico em pastas geopoliméricas para cimentação de poços de petróleo

The development of activities the of oil and gas sector have promoted the search for suitable materials for cementing oil wells. In the state of the Rio Grande do Norte, the integrity of the cement sheath tends to be impaired during steam injection, a procedure necessary to increase oil recovery in reservoirs with low-viscosity oil. The geopolymer is a material that can be used as alternative cement, since it has been used in the production of fire-resistant components, building structures, and for the control of toxic or radioactive residues. Geopolymers result from condensation polymer alkali aluminosilicates and silicates resulting three-dimensional polymeric structures. They are produced in a manner different from that of Portland cement, which is made an activating solution that is mixed with geopolymer precursor. Among the few works studied allowed us to conclude that the pastes prepared with metakaolin as precursor showed better performance of its properties. Several studies show the addition of waste clay as a means of reducing cost and improving end of the folder properties. On this basis, the goal is to study the influence of the addition of ceramic waste in geopolymer paste. To develop the study of rheology tests were carried out, filtered, thickening time, compressive strength, free water, specific gravity and permeability, according to the American Pretoleum Institute (API). The results for all formulations studied show that the folders have high mechanical strength to a light paste; low filtrate volume, absence of free water, very low permeability, slurry, consistent with a light paste, and thickening time low that can be corrected with the use of a retardant handle. For morphological characterization, microstructural, physical, chemical and thermal tests were carried out by XRD, MEV, DTA, TG, FTIR. In the trial of XRD, it was found that geopolymer is an amorphous material, with a peak of crystalline kaolinite. In tests of TG / DTA, revealed the presence of a significant event, which represents the mass loss related to water, and also observed the reduction of weight loss by increasing the concentration of ceramic waste. In the trial of MEV, we found a uniform matrix without the presence of other phases. In the trial of FT-IR, we observed the presence of the band related to water. From all results it was determined that the optimum concentration range of use is between 2.5 and 5% of waste ceramic

São os podzóis dominantes nas formações arenosas do litoral português ? O caso da Mata Nacional de Leiria

The knowledge on the Podzols which occur in Portugal is scarce. Besides its morphological characterization, their actual extension and distribution are unknown, and its taxonomy is controversial. Therefore, 22 pedons formed under conditions considered representative of those in which Podzols mostly occur in the country were selected in the Mata Nacional de Leiria, and their morphological, physical, chemical and mineralogical characteristics were studied. Soils developed in such conditions are both Podzols and Arenossolos sensu WRB 2006, but the latter are clearly predominant. The Podzols frequently show thick albic horizons and incipient spodic horizons; the latter are dusky, but show organic matter (OM) contents close the minimum threshold considered as diagnostic criteria for spodic horizons, and low content in Al and Fe. A wide spectrum of characteristics is observed in the Arenosols. Some of them present profils with morphology close to that of the Podzols, but with a low illuvial acumulationb of OM (and Fe e Al components), and the others (the predominant Arenosols in the study area) do not present intergrade characteristics, although they can show expressed albic horizons. The former Arenosols correspond to intergrades of Podzols which are not satisfactorily fit into the recent WRB versions. The characteristics of Podzols are strongly dependent on the low weatherability and high permeability of the lithological substrate (non consolidated quartzeous sediments)

Morphological and molecular characterization of Colletotrichum spp. from citrus orchards affected by postbloom fruit drop in Brazil

Brazilian isolates of Colletotrichum spp. from citrus orchards affected by postbloom fruit drop were examined for colony colour, mycelial growth, benomyl-resistance, pathogenicity, and genetic variability by random amplified polymorphic DNA (RAPD) analysis. All isolates were obtained from flowers and persistent calyxes from different citrus hosts from São Paulo, Brazil. DNA polymorphisms detected after amplification with random 10-mer primers were used to classify the isolates into two groups. Group I isolates grew rapidly on potato-dextrose agar (PDA) and were sensitive to benomyl, and group II isolates grew slowly on PDA and were benomyl-resistant. Colletotrichum acutatum was analyzed by RAPD and had high genetic similarity with group II isolates of Colletotrichum from citrus. Probably, the group I is C, gloeosporioides and group II is C. acutatum.

Identification and characterization of Colletotrichum spp. affecting fruit after harvest in Brazil

Colletotrichum spp. cause anthracnose in various fruits post-harvest and are a particularly important problem in tropical and subtropical fruits. The disease in fruits of avocado, guava, papaya, mango and passion fruit has been reported to be caused by C. gloeosporioides, and in banana by C. musae. In subtropical and temperate crops such apple, grape, peach and kiwi, the disease is caused by C. acutatum. The variation in pathogenic, morphological, cultural and molecular characteristics of Brazilian isolates of Colletotrichum acutatum Simmonds and isolates from post-harvest decays of avocado, banana, guava, papaya, mango and passion fruit was evaluated. The fruits were inoculated with mycelium of C. acutatum, Colletotrichum spp. and C. musae on a disc of potato dextrose agar. The morphological, cultural and molecular characteristics studied were conidia morphology, colony growth at different temperatures, colony coloration and PCR with primers CaInt2 and ITS4 for C. acutatum and CgInt and ITS4 for C. gloeosporioides. C. acutatum was pathogenic to avocado, guava, papaya, mango and passion fruit, but it was not pathogenic to banana. The morphological, cultural and molecular studies indicated that the avocado, papaya, mango and passion fruit isolates were C. gloeosporioides. The natural guava isolate was identified as C. acutatum, which had not been found previously to produce anthracnose symptoms on guava in Brazil.

Characterization of the chestnut germoplasm of Emilia-Romagna region and ancient fruit tree varieties valorization

Molecular characterization represents a valid support for the recovery of germoplasm, also motivated by the interest for the valorization of local productions in order to make their traceability possible. Molecular characterization is also fundamental for the individuation of misnomers in collection fields in which the different varieties are preserved. In particular, microsatellites have been used in this research to investigate the genetic diversity, inside a population and at an individual level, and the correct varietal correspondence. The research is mainly based on the study of European chestnut (Castanea sativa Mill.) cultivars to evaluate the genetic diversity and relationships in Emilia-Romagna region (Italy). A STRUCTURE analysis was carried out at European level with the allelic frequencies of the samples collected in Emilia-Romagna. Variation found at group and subgroup level may reflect a combination of historical migration/selection processes and adaptive factors to different environments between Italian and Spanish regions. In addition, a case study for the valorization of an old local variety and its re-introduction in the cultivation areas was proposed. This research was carried out by a morphological and molecular characterization of the local apple variety 'Rosa Romana'. The conservation of this variety entails the discrimination of different accessions with very similar phenotype that are present in the original cultivation area. The identification of historical trees and most adequate reference plants are fundamental steps for the correct propagation of this old variety and for the development of nursery activities. This will also promote and re-evaluate the exploitation and protection of such ancient Italian apple cultivars. This model could be in future also carried out for chestnut varieties. In conclusion, analysis with molecular markers is of fundamental importance for the protection and the maintenance of local and ancient varieties which allow to increase the allelic variability available for breeding programs.

Molecular And Biochemical Characterization Of Caffeine Synthase And Purine Alkaloid Concentration In Guarana Fruit.

Guarana seeds have the highest caffeine concentration among plants accumulating purine alkaloids, but in contrast with coffee and tea, practically nothing is known about caffeine metabolism in this Amazonian plant. In this study, the levels of purine alkaloids in tissues of five guarana cultivars were determined. Theobromine was the main alkaloid that accumulated in leaves, stems, inflorescences and pericarps of fruit, while caffeine accumulated in the seeds and reached levels from 3.3% to 5.8%. In all tissues analysed, the alkaloid concentration, whether theobromine or caffeine, was higher in young/immature tissues, then decreasing with plant development/maturation. Caffeine synthase activity was highest in seeds of immature fruit. A nucleotide sequence (PcCS) was assembled with sequences retrieved from the EST database REALGENE using sequences of caffeine synthase from coffee and tea, whose expression was also highest in seeds from immature fruit. The PcCS has 1083bp and the protein sequence has greater similarity and identity with the caffeine synthase from cocoa (BTS1) and tea (TCS1). A recombinant PcCS allowed functional characterization of the enzyme as a bifunctional CS, able to catalyse the methylation of 7-methylxanthine to theobromine (3,7-dimethylxanthine), and theobromine to caffeine (1,3,7-trimethylxanthine), respectively. Among several substrates tested, PcCS showed higher affinity for theobromine, differing from all other caffeine synthases described so far, which have higher affinity for paraxanthine. When compared to previous knowledge on the protein structure of coffee caffeine synthase, the unique substrate affinity of PcCS is probably explained by the amino acid residues found in the active site of the predicted protein.

Biochemical characterization of pulp of banana fruit: measurement of soluble sugars, organic acids, free ACC and in vitro ACC oxidase

Introduction. We present some protocols aiming at partially characterizing banana fruit quality through measurement of some key biochemical parameters. The principle, key advantages, starting plant material, time required and expected results are presented. Materials and methods. This part describes the required laboratory materials and the steps necessary for achieving four protocols making it possible to measure sugar, organic acids and free ACC contents, and in vitro ACC oxidase activity. Results. Standard results obtained by using the protocols described are presented in the figures.

Characterization of different fruit wines made from cacao, cupuassu, gabiroba, jaboticaba and umbu

The main aim of this work was to produce fruit wines from pulp of gabiroba, cacao, umbu, cupuassu and jaboticaba and characterize them using gas chromatography-mass spectrometry for determination of minor compounds and gas chromatography-flame ionization detection for major compounds. Ninety-nine compounds (C(6) compounds, alcohols, monoterpenic alcohols, monoterpenic oxides, ethyl esters, acetates, volatile phenols, acids, carbonyl compounds, sulfur compounds and sugars) were identified in fruit wines. The typical composition for each fruit wine was evidenced by principal component analysis and Tukey test. The yeast UFLA CA 1162 was efficient in the fermentation of the fruit pulp used in this work. The identification and quantification of the compounds allowed a good characterization of the fruit wines. With our results, we conclude that the use of tropical fruits in the production of fruit wines is a viable alternative that allows the use of harvest surpluses and other underused fruits, resulting in the introduction of new products into the market. (C) 2010 Elsevier Ltd. All rights reserved.

Morphological and molecular characterization of cyanobacteria from a Brazilian facultative wastewater stabilization pond and evaluation of microcystin production

The cyanobacterial population in the Cajati waste stabilization pond system (WSP) from Sao Paulo State, Brazil was assessed by cell isolation and direct microscope counting techniques. Ten strains, belonging to five genera (Synechococcus, Merismopedia, Leptolyngbya, Limnothrix, and Nostoc), were isolated and identified by morphological and molecular analyses. Morphological identification of the isolated strains was congruent with their phylogenetic analyses based on 16S rDNA gene sequences. Six cyanobacterial genera (Synechocystis, Aphanocapsa, Merismopedia, Lyngbya, Phormidium, and Pseudanabaena) were identified by direct microscope inspection. Both techniques were complementary, since, of the six genera identified by direct microscopic inspection, only Merismopedia was isolated, and the four other isolated genera were not detected by direct inspection. Direct microscope counting of preserved cells showed that cyanobacteria were the dominant members (> 90%) of the phytoplankton community during both periods evaluated (summer and autumn). ELISA tests specific for hepatotoxicmicrocystins gave positive results for six strains (Synechococcus CENA108, Merismopedia CENA106, Leptolyngbya CENA103, Leptolyngbya CENA112, Limnothrix CENA109, and Limnothrix CENA110), and for wastewater samples collected from raw influent (3.70 mu g microcystins/l) and treated effluent (3.74 mu g microcystins/l) in summer. Our findings indicate that toxic cyanobacteria in WSP systems are of concern, since the treated effluent containing cyanotoxins will be discharged into rivers, irrigation channels, estuaries, or reservoirs, and can affect human and animal health.