979 resultados para foliar application
Resumo:
The objective of this study was to evaluate gas exchange and photochemical efficiency of cotton cultivars under leaf application of silicon. Therefore, the experiment was conducted in a completely randomized in a factorial 3 x 5, three cotton cultivars ('BRS Topazio', 'BRS Safira' and 'BRS Rubi'), five silicon concentrations (0, 50, 100, 150, 200 mg L-1) and four replications. Gas exchange and photochemical efficiency were determined by measuring the rate of CO2 assimilation, transpiration, stomatal conductance, internal CO2 concentration, instantaneous efficiency in water use, instantaneous carboxylation efficiency, initial fluorescence, maximum quantum efficiency of the variable and photosystem II (PSII). The data variables were subjected to analysis of variance and regression test comparison of means. There were significant differences in gas exchange and photochemical efficiency in response to concentrations of silicon. There were also significant differences among cotton cultivars evaluated. In cultivar 'BRS Top zio', the application of silicon increased CO2 assimilation rate and quantum efficiency of PSII. In 'BRS Safira' silicon reduced the rate of assimilation and internal CO2 concentration. In 'BRS Rubi' element increased the fluorescence of chlorophyll 'a' and quantum efficiency of photosystem II, and reduced the rate of assimilation and internal CO2 concentration and stomatal conductance. Silicate fertilization provided 'BRS Topazio' to express better photosynthetic rate in relation to 'BRS Safira' and 'BRS Rubi'. No damage occurred in PSII when 'BRS Top zio', 'BRS Safira' and 'BRS Rubi' cultivars received silicon as supplementary nutrition.
Resumo:
Pós-graduação em Agronomia - FEIS
Resumo:
The soil acidity in no tillage system could be resolved by lime superficial application, improvement to crop mineral nutrition and yield. The experiment carried out on a Rhodic Kandiudalf in Botucatu, São Paulo State, Brazil, in dry conditions, aiming to evaluate the agronomic development and leaf diagnosis of black oat plants, under superficial liming in no tillage system. A randomized complete block design was used, with four replications, the treatments were superficial application of different dolomítico lime rates (R0 = zero – without lime; R1 = 1,8 t ha-1 – lime to increase the base saturation at 50%; R2 = 3,6 t ha-1 – lime to increase the base saturation at 70% and R3 = 5,4 t ha-1 – lime to increase the base saturation at 90%), in October 2002. The black oat Common cultivar was seed in April 2004, in to second year, after the crop rotation of millet (spring) – common bean (summer) – black oat (autumn-winter). The results showed that: the black oat had yield increase by superficial liming, mainly to most dry matter and grain per panicule. Beyond, the superficial liming application did not prejudice leaf diagnosis of culture.
Resumo:
The application of industrial and municipal waste in the soil may be recommended by your corrective and fertilizer value, giving the great potential for agricultural reuse, improves physical, chemical and biological soil properties and helps to reduce the consumption of fertilizers and correctives, without contamination by heavy metals. This study aimed to evaluate the absorption of nutrients and potentially toxic elements, and their effect on the development of soybean (Glycine max (L.) Merrill) grown under No-Tillage system (NT). The work was developed in the field, at the Experimental Farm Lageado - FCA / UNESP, Botucatu (SP) in an Oxisol under tropical climate of altitude. The experimental design was randomized blocks, factorial 4x4+1, with four replications. The treatments consisted of four residues: two sewage sludge, one centrifuged and treated with quicklime (LC) and a biodigester (LB) and two industrial wastes: steel slag (E) and lime mud (Lcal) , applied in dosages of 0, 2, 4 and 8 Mg ha-1. The surface application of LC, LB, Lcal and E residues in soil under NT favored the development of soybean, with no heavy metal contamination, given the current legislation.
Resumo:
It is known that the presence of large masses of vegetation is a factor that can influence the microclimate of a region. In this paper we analyzed the correlation between leaf area index (LAI) and land surface temperature (LST), both estimated from remote sensing images from Landsat-5 TM in an area of eucalyptus plantation, and these estimates were compared to the observed data. The correlation between LAI and LST was not significant (16%), which indicates that there is no necessarily a direct influence of vegetation in the local temperature. The comparison between estimated and observed data shows that the application of remote sensing techniques in the estimative of interested variables is efficient, because the estimatives followed consistently the observed values.
Resumo:
During my Doctoral study I researched about the remote detection of canopy N concentration in forest stands, its potentials and problems, under many overlapping perspectives. The study consisted of three parts. In S. Rossore 2000 dataset analysis, I tested regressions between N concentration and NIR reflectances derived from different sources (field samples, airborne and satellite sensors). The analysis was further expanded using a larger dataset acquired in year 2009 as part of a new campaign funded by the ESA. In both cases, a good correlation was observed between Landsat NIR, using both TM (2009) and ETM+ (2000) imagery, and N concentration measured by a CHN elemental analyzer. Concerning airborne sensors I did not obtain the same good results, mainly because of the large FOV of the two instruments, and to the anisotropy of vegetation reflectance. We also tested the relation between ground based ASD measures and nitrogen concentration, obtaining really good results. Thus, I decided to expand my study to the regional level, focusing only on field and satellite measures. I analyzed a large dataset for the whole of Catalonia, Spain; MODIS imagery was used, in consideration of its spectral characteristics and despite its rather poor spatial resolution. Also in this case a regression between nitrogen concentration and reflectances was found, but not so good as in previous experiences. Moreover, vegetation type was found to play an important role in the observed relationship. We concluded that MODIS is not the most suitable satellite sensor in realities like Italy and Catalonia, which present a patchy and inhomogeneous vegetation cover; so it could be utilized for the parameterization of eco-physiological and biogeochemical models, but not for really local nitrogen estimate. Thus multispectral sensors similar to Landsat Thematic Mapper, with better spatial resolution, could be the most appropriate sensors to estimate N concentration.
Resumo:
By attacking plants, herbivorous mammals, insects, and belowground pathogens are known to play an important role in maintaining biodiversity in grasslands. Foliar fungal pathogens are ubiquitous in grassland ecosystems, but little is known about their role as drivers of community composition and diversity. Here we excluded foliar fungal pathogens from perennial grassland by using fungicide to determine the effect of natural levels of disease on an otherwise undisturbed plant community. Importantly, we excluded foliar fungal pathogens along with rabbits, insects, and mollusks in a full factorial design, which allowed a comparison of pathogen effects along with those of better studied plant enemies. This revealed that fungal pathogens substantially reduced aboveground plant biomass and promoted plant diversity and that this especially benefited legumes. The scale of pathogen effects on productivity and biodiversity was similar to that of rabbits and insects, but different plant species responded to the exclusion of the three plant enemies. These results suggest that theories of plant coexistence and management of biodiversity in grasslands should consider foliar fungal pathogens as potentially important drivers of community composition.
Resumo:
Fungicides were rarely used on hybrid corn prior to 2007, however, in the past few years, some farmers have included fungicides in their common crop production, particularly as the value of grain has increased. Fungicides are recommended for foliar disease management to protect yield potential. There also have been reports of increased yields in the absence of disease. A number of fungicides are registered for use on corn. The objectives of this project were to evaluate the yield response of hybrid corn to foliar fungicide application at various timings.
Resumo:
Use of foliar fungicides and insecticides are an effective strategy for managing foliar diseases on soybean. There are many different fungicides and insecticides available for use currently in Iowa. Iowa State University personnel assessed the success of fungicides and insecticides across Iowa. This study was conducted at six locations: Sutherland (NW), Kanawha (NC), Nashua (NE), Ames (central), Crawfordsville (SE), and Lewis (SW) research farms (Figure 1).
Resumo:
Fungicide use on hybrid corn has increased considerably in the past four growing seasons primarily due to reports of increased yields, even in the absence of disease and higher corn prices. A number of fungicides are registered for use on corn. The objectives of this project were to 1) assess the effect of timing of application of fungicides on standability, 2) evaluate the yield response of hybrid corn to foliar fungicide application, and 3) to discern differences, if any, between fungicide products.
Resumo:
Use of foliar fungicides and insecticides are an effective strategy for managing foliar diseases of soybean. There are many different fungicides and insecticides available for use currently in Iowa. Iowa State University personnel assessed the success of fungicides and insecticides across Iowa. This study was conducted at six locations: Sutherland (NW), Kanawha (NC), Nashua (NE), Ames (central), Crawfordsville (SE), and Lewis (SW) research farms (Figure 1).
Resumo:
Fungicide use on hybrid corn has increased considerably in the past three growing seasons primarily due to reports of increased yields, even in the absence of disease and higher corn prices. A number of fungicides are registered for use on corn. The objectives of this project were to 1) evaluate the yield response of hybrid corn to foliar fungicide application, 2) compare the yield response of various products and timing of application, and 3) to assess the effect of fungicide application on stalk rot development.
Resumo:
Use of foliar fungicides and insecticides are an effective strategy for managing foliar diseases of soybean. There are many different fungicides and insecticides available for use currently in Iowa. Iowa State University personnel assessed the success of fungicides and insecticides across Iowa. This study was conducted at six locations: Sutherland (NW), Kanawha (NC), Nashua (NE), Ames (central), Crawfordsville (SE), and Lewis (SW) research farms (Figure 1).
Resumo:
Fungicides were rarely used on hybrid corn prior to 2007, however, in the past few years some farmers have made fungicides a regular input in their crop production, particularly as the value of grain has increased. Fungicides are recommended for foliar disease management to protect yield potential. There have also been reports of increased yields in the absence of disease. A number of fungicides are registered for use on corn. The objectives of this project were to evaluate the yield response of hybrid corn to foliar fungicide application at various timings.
Resumo:
Use of foliar fungicides and insecticides are an effective strategy for managing foliar diseases of soybean. There are many different fungicides and insecticides available for use currently in Iowa. Iowa State University personnel assessed the success of fungicides and insecticides across Iowa. This study was conducted at six locations: Sutherland (NW), Kanawha (NC), Nashua (NE), Ames (central), Crawfordsville (SE), and Lewis (SW) research farms (Figure 1).