The Effects of Multifactorial Fall Prevention on the Psychological Risk Factors of Falling

Psychological factors, such as depression or depressive symptoms and fear of falling are linked to falls among the aged. According to previous studies, they may increase the risk of falls and injurious falls. In addition, depression or a high amount of depressive symptoms and fear of falling may hinder participation in preventive activities. Despite the severe consequences of both conditions and their high prevalence among the aged, they have rarely been studied in the context of fall prevention. The study aimed to assess the effects of multifactorial fall prevention on the psychological risk factors of falling (depressive symptoms and fear of falling) among the community-dwelling aged at increased risk of falling. In addition, it aimed to determine factors predicting high adherence to preventive activities. Volunteers aged 65 or over, who had fallen during the year previous to randomisation were recruited. Participants (n=591) were randomised into an intervention or a control group. The intervention group received a multifactorial fall prevention programme including geriatric assessment, individual guidance on fall and fracture prevention, group- and home-based physical exercise, psychosocial group activities, lectures and home hazards assessment. The control group had a one-time counselling on fall and fracture prevention. The data on psychological risk factors of falling were collected by self-rated questionnaires. Multifactorial fall prevention was not effective in reducing depressive symptoms or fear of falling compared to one-time counselling in the total sample. However, in subgroup analyses, depressive symptoms reduced statistically significantly more among the men and older participants of the intervention group compared to the control group. Female gender, high physical and cognitive abilities and low self-perceived probability of falling were independent predictors of higher adherence in organised activities. In conclusion, few psychological benefits were gained during this multifactorial fall prevention trial. More attention should be focused on adherence, especially among the aged with functional disabilities.

Database Rights in Safe European Home: The Path to More Rigorous Protection of Information

1. Introduction "The one that has compiled ... a database, the collection, securing the validity or presentation of which has required an essential investment, has the sole right to control the content over the whole work or over either a qualitatively or quantitatively substantial part of the work both by means of reproduction and by making them available to the public", Finnish Copyright Act, section 49.1 These are the laconic words that implemented the much-awaited and hotly debated European Community Directive on the legal protection of databases,2 the EDD, into Finnish Copyright legislation in 1998. Now in the year 2005, after more than half a decade of the domestic implementation it is yet uncertain as to the proper meaning and construction of the convoluted qualitative criteria the current legislation employs as a prerequisite for the database protection both in Finland and within the European Union. Further, this opaque Pan-European instrument has the potential of bringing about a number of far-reaching economic and cultural ramifications, which have remained largely uncharted or unobserved. Thus the task of understanding this particular and currently peculiarly European new intellectual property regime is twofold: first, to understand the mechanics and functioning of the EDD and second, to realise the potential and risks inherent in the new legislation in economic, cultural and societal dimensions. 2. Subject-matter of the study: basic issues The first part of the task mentioned above is straightforward: questions such as what is meant by the key concepts triggering the functioning of the EDD such as presentation of independent information, what constitutes an essential investment in acquiring data and when the reproduction of a given database reaches either qualitatively or quantitatively the threshold of substantiality before the right-holder of a database can avail himself of the remedies provided by the statutory framework remain unclear and call for a careful analysis. As for second task, it is already obvious that the practical importance of the legal protection providedby the database right is in the rapid increase. The accelerating transformationof information into digital form is an existing fact, not merely a reflection of a shape of things to come in the future. To take a simple example, the digitisation of a map, traditionally in paper format and protected by copyright, can provide the consumer a markedly easier and faster access to the wanted material and the price can be, depending on the current state of the marketplace, cheaper than that of the traditional form or even free by means of public lending libraries providing access to the information online. This also renders it possible for authors and publishers to make available and sell their products to markedly larger, international markets while the production and distribution costs can be kept at minimum due to the new electronic production, marketing and distributionmechanisms to mention a few. The troublesome side is for authors and publishers the vastly enhanced potential for illegal copying by electronic means, producing numerous virtually identical copies at speed. The fear of illegal copying canlead to stark technical protection that in turn can dampen down the demand for information goods and services and furthermore, efficiently hamper the right of access to the materials available lawfully in electronic form and thus weaken the possibility of access to information, education and the cultural heritage of anation or nations, a condition precedent for a functioning democracy. 3. Particular issues in Digital Economy and Information Networks All what is said above applies a fortiori to the databases. As a result of the ubiquity of the Internet and the pending breakthrough of Mobile Internet, peer-to-peer Networks, Localand Wide Local Area Networks, a rapidly increasing amount of information not protected by traditional copyright, such as various lists, catalogues and tables,3previously protected partially by the old section 49 of the Finnish Copyright act are available free or for consideration in the Internet, and by the same token importantly, numerous databases are collected in order to enable the marketing, tendering and selling products and services in above mentioned networks. Databases and the information embedded therein constitutes a pivotal element in virtually any commercial operation including product and service development, scientific research and education. A poignant but not instantaneously an obvious example of this is a database consisting of physical coordinates of a certain selected group of customers for marketing purposes through cellular phones, laptops and several handheld or vehicle-based devices connected online. These practical needs call for answer to a plethora of questions already outlined above: Has thecollection and securing the validity of this information required an essential input? What qualifies as a quantitatively or qualitatively significant investment? According to the Directive, the database comprises works, information and other independent materials, which are arranged in systematic or methodical way andare individually accessible by electronic or other means. Under what circumstances then, are the materials regarded as arranged in systematic or methodical way? Only when the protected elements of a database are established, the question concerning the scope of protection becomes acute. In digital context, the traditional notions of reproduction and making available to the public of digital materials seem to fit ill or lead into interpretations that are at variance with analogous domain as regards the lawful and illegal uses of information. This may well interfere with or rework the way in which the commercial and other operators have to establish themselves and function in the existing value networks of information products and services. 4. International sphere After the expiry of the implementation period for the European Community Directive on legal protection of databases, the goals of the Directive must have been consolidated into the domestic legislations of the current twenty-five Member States within the European Union. On one hand, these fundamental questions readily imply that the problemsrelated to correct construction of the Directive underlying the domestic legislation transpire the national boundaries. On the other hand, the disputes arisingon account of the implementation and interpretation of the Directive on the European level attract significance domestically. Consequently, the guidelines on correct interpretation of the Directive importing the practical, business-oriented solutions may well have application on European level. This underlines the exigency for a thorough analysis on the implications of the meaning and potential scope of Database protection in Finland and the European Union. This position hasto be contrasted with the larger, international sphere, which in early 2005 does differ markedly from European Union stance, directly having a negative effect on international trade particularly in digital content. A particular case in point is the USA, a database producer primus inter pares, not at least yet having aSui Generis database regime or its kin, while both the political and academic discourse on the matter abounds. 5. The objectives of the study The above mentioned background with its several open issues calls for the detailed study of thefollowing questions: -What is a database-at-law and when is a database protected by intellectual property rights, particularly by the European database regime?What is the international situation? -How is a database protected and what is its relation with other intellectual property regimes, particularly in the Digital context? -The opportunities and threats provided by current protection to creators, users and the society as a whole, including the commercial and cultural implications? -The difficult question on relation of the Database protection and protection of factual information as such. 6. Dsiposition The Study, in purporting to analyse and cast light on the questions above, is divided into three mainparts. The first part has the purpose of introducing the political and rationalbackground and subsequent legislative evolution path of the European database protection, reflected against the international backdrop on the issue. An introduction to databases, originally a vehicle of modern computing and information andcommunication technology, is also incorporated. The second part sets out the chosen and existing two-tier model of the database protection, reviewing both itscopyright and Sui Generis right facets in detail together with the emergent application of the machinery in real-life societal and particularly commercial context. Furthermore, a general outline of copyright, relevant in context of copyright databases is provided. For purposes of further comparison, a chapter on the precursor of Sui Generi, database right, the Nordic catalogue rule also ensues. The third and final part analyses the positive and negative impact of the database protection system and attempts to scrutinize the implications further in the future with some caveats and tentative recommendations, in particular as regards the convoluted issue concerning the IPR protection of information per se, a new tenet in the domain of copyright and related rights.

The Significance of Business Exit for Future Entrepreneurial Activity

Purpose: The purpose of this paper is to analyse the impact of business exits on future dimensions of entrepreneurial activity at the macroeconomic level. Design/methodology/approach: This research uses the Global Entrepreneurship Monitor (GEM) data for 41 countries and the Generalized Method of Moments (GMM) to carry out the analysis. The paper differentiates the effect of the two components of total entrepreneurial activity, and the two motivations for it – opportunity and necessity entrepreneurship. Findings: The results presented here show a positive and significant effect of the coefficient associated with exits in all models. This means that the levels of entrepreneurial activity exceed business exits. The robustness of the models are tested, including other variables such as the fear of failure, the Gross Domestic Product, role models, entrepreneurial skills and the unemployment variables. The main hypothesis which stated that at national level business exits imply greater rates of opportunity-driven entrepreneurship is corroborated. Originality/value: One would expect that unemployment rates would imply higher levels of necessity entrepreneurship. However, results show that unemployment rates do in fact favour opportunity entrepreneurship levels. This could be due to those government policies that are aimed at promoting entrepreneurship through the capitalization of unemployment to be totally invested in a new start-up. To the best of our knowledge, this is the first panel data study to link previous exit rates to future dimensions of entrepreneurial activity. Keywords: Entrepreneurship, business exits, social values, industrial organization Paper type: Research paper

Drivers and Barriers of Collaboration in the Value Chain of Paperboard-Packed Consumer Goods

Value chain collaboration has been a prevailing topic for research, and there is a constantly growing interest in developing collaborative models for improved efficiency in logistics. One area of collaboration is demand information management, which enables improved visibility and decrease of inventories in the value chain. Outsourcing of non-core competencies has changed the nature of collaboration from intra-enterprise to cross-enterprise activity, and this together with increasing competition in the globalizing markets have created a need for methods and tools for collaborative work. The retailer part in the value chain of consumer packaged goods (CPG) has been studied relatively widely, proven models have been defined, and there exist several best practice collaboration cases. The information and communications technology has developed rapidly, offering efficient solutions and applications to exchange information between value chain partners. However, the majority of CPG industry still works with traditional business models and practices. This concerns especially companies operating in the upstream of the CPG value chain. Demand information for consumer packaged goods originates at retailers' counters, based on consumers' buying decisions. As this information does not get transferred along the value chain towards the upstream parties, each player needs to optimize their part, causing safety margins for inventories and speculation in purchasing decisions. The safety margins increase with each player, resulting in a phenomenon known as the bullwhip effect. The further the company is from the original demand information source, the more distorted the information is. This thesis concentrates on the upstream parts of the value chain of consumer packaged goods, and more precisely the packaging value chain. Packaging is becoming a part of the product with informative and interactive features, and therefore is not just a cost item needed to protect the product. The upstream part of the CPG value chain is distinctive, as the product changes after each involved party, and therefore the original demand information from the retailers cannot be utilized as such – even if it were transferred seamlessly. The objective of this thesis is to examine the main drivers for collaboration, and barriers causing the moderate adaptation level of collaborative models. Another objective is to define a collaborative demand information management model and test it in a pilot business situation in order to see if the barriers can be eliminated. The empirical part of this thesis contains three parts, all related to the research objective, but involving different target groups, viewpoints and research approaches. The study shows evidence that the main barriers for collaboration are very similar to the barriers in the lower part of the same value chain; lack of trust, lack of business case and lack of senior management commitment. Eliminating one of them – the lack of business case – is not enough to eliminate the two other barriers, as the operational model in this thesis shows. The uncertainty of the future, fear of losing an independent position in purchasing decision making and lack of commitment remain strong enough barriers to prevent the implementation of the proposed collaborative business model. The study proposes a new way of defining the value chain processes: it divides the contracting and planning process into two processes, one managing the commercial parts and the other managing the quantity and specification related issues. This model can reduce the resistance to collaboration, as the commercial part of the contracting process would remain the same as in the traditional model. The quantity/specification-related issues would be managed by the parties with the best capabilities and resources, as well as access to the original demand information. The parties in between would be involved in the planning process as well, as their impact for the next party upstream is significant. The study also highlights the future challenges for companies operating in the CPG value chain. The markets are becoming global, with toughening competition. Also, the technology development will most likely continue with a speed exceeding the adaptation capabilities of the industry. Value chains are also becoming increasingly dynamic, which means shorter and more agile business relationships, and at the same time the predictability of consumer demand is getting more difficult due to shorter product life cycles and trends. These changes will certainly have an effect on companies' operational models, but it is very difficult to estimate when and how the proven methods will gain wide enough adaptation to become standards.

Offdesign operation of kraft recovery boiler

A model to solve heat and mass balances during the offdesign load calculations was created. These equations are complex and nonlinear. The main new ideas used in the created offdesign model of a kraft recovery boiler are the use of heat flows as torn iteration variables instead of the current practice of using the mass flows, vectorizing equation solving, thus speeding up the process, using non dimensional variables for solving the multiple heat transfer surface problem and using a new procedure for calculating pressure losses. Recovery boiler heat and mass balances are reduced to vector form. It is shown that these vectorized equations can be solved virtually without iteration. The iteration speed is enhanced by the use of the derived method of calculating multiple heat transfer surfaces simultaneously. To achieve this quick convergence the heat flows were used as the torn iteration parameters. A new method to handle pressure loss calculations with linearization was presented. This method enabled less time to be spent calculating pressure losses. The derived vector representation of the steam generator was used to calculate offdesign operation parameters for a 3000 tds/d example recovery boiler. The model was used to study recovery boiler part load operation and the effect of the black liquor dry solids increase on recovery boiler dimensioning. Heat flows to surface elements for part load calculations can be closely approximated with a previously defined exponent function. The exponential method can be used for the prediction of fouling in kraft recovery boilers. For similar furnaces the firing of 80 % dry solids liquor produces lower hearth heat release rate than the 65 % dry solids liquor if we fire at constant steam flow. The furnace outlet temperatures show that capacity increase with firing rate increase produces higher loadings than capacity increase with dry solids increase. The economizers, boiler banks and furnaces can be dimensioned smaller if we increase the black liquor dry solids content. The main problem with increased black liquor dry solids content is the decrease in the heat available to superheat. Whenever possible the furnace exit temperature should be increased by decreasing the furnace height. The increase in the furnace exit temperature is usually opposed because of fear of increased corrosion.

Spectrometrical Monitoring of Laser Sintering Process of Ceramic Material

This thesis is done as a part of project called FuncMama that is a project between Technical Research Centre of Finland (VTT), Oulu University (OY), Lappeenranta University of Technology (LUT) and Finnish industrial partners. Main goal of the project is to manufacture electric and mechanical components from mixed materials using laser sintering. Aim of this study was to create laser sintered pieces from ceramic material and monitor the sintering event by using spectrometer. Spectrometer is a device which is capable to record intensity of different wavelengths in relation with time. In this study the monitoring of laser sintering was captured with the equipment which consists of Ocean Optics spectrometer, optical fiber and optical lens (detector head). Light from the sintering process hit first to the lens system which guides the light in to the optical fibre. Optical fibre transmits the light from the sintering process to the spectrometer where wavelengths intensity level information is detected. The optical lens of the spectrometer was rigidly set and did not move along with the laser beam. Data which was collected with spectrometer from the laser sintering process was converted with Excel spreadsheet program for result’s evaluation. Laser equipment used was IPG Photonics pulse fibre laser. Laser parameters were kept mainly constant during experimental part and only sintering speed was changed. That way it was possible to find differences in the monitoring results without fear of too many parameters mixing together and affecting to the conclusions. Parts which were sintered had one layer and size of 5 x 5 mm. Material was CT2000 – tape manufactured by Heraeus which was later on post processed to powder. Monitoring of different sintering speeds was tested by using CT2000 reference powder. Moreover tests how different materials effect to the process monitoring were done by adding foreign powder Du Pont 951 which had suffered in re-grinding and which was more reactive than CT2000. By adding foreign material it simulates situation where two materials are accidently mixed together and it was studied if that can be seen with the spectrometer. It was concluded in this study that with the spectrometer it is possible to detect changes between different laser sintering speeds. When the sintering speed is lowered the intensity level of light is higher from the process. This is a result of higher temperature at the sintering spot and that can be noticed with the spectrometer. That indicates it could be possible to use spectrometer as a tool for process observation and support the idea of having system that can help setting up the process parameter window. Also important conclusion was how well the adding of foreign material could be seen with the spectrometer. When second material was added a significant intensity level raise could be noticed in that part where foreign material was mixed. That indicates it is possible to see if there are any variations in the material or if there are more materials mixed together. Spectrometric monitoring of laser sintering could be useful tool for process window observation and temperature controlling of the sintering process. For example if the process window for specific material is experimentally determined to get wanted properties and satisfying sintering speed. It is possible if the data is constantly recorded that the results can show faults in the part texture between layers. Changes between the monitoring data and the experimentally determined values can then indicate changes in the material being generated by material faults or by wrong process parameters. The results of this study show that spectrometer could be one possible tool for monitoring. But to get in that point where this all can be made possible much more researching is needed.

Physical-chemical characterization and wet milling yield of four maize hybrids

The influence of physical-chemical characteristics of maize grains and lactic acid concentrations on byproduct yields, generated by conventional wet milling, was studied during steeping, for four maize hybrids and two lactic acid concentrations (0.55 and 1.00%). For physical-chemical characterization, grain dimensions (length, thickness, and width) were determined, as well as mass of 100 grains, percentage of floating grains, volumetric mass, and centesimal composition. Statistical differences were found for percentage of floating grains (2.33 to 24.67%), volumetric mass (0.814 to 0.850 kg.L-1), mass of 100 grains (0.033 to 0.037 kg), water content (11.86 to 12.20%), proteins (8.21 to 9.06%), lipids (3.00 to 4.77%), and ashes (1.07 to 1.26%). There were no relationships of wet milling yields with maize appearance and physical-chemical characteristics. The addition of 1.00% lactic acid did not statistically improve byproduct yields; however, it favored separation of the grain components.

Simulation of structural stress history based on dynamic analysis

Modern machine structures are often fabricated by welding. From a fatigue point of view, the structural details and especially, the welded details are the most prone to fatigue damage and failure. Design against fatigue requires information on the fatigue resistance of a structure’s critical details and the stress loads that act on each detail. Even though, dynamic simulation of flexible bodies is already current method for analyzing structures, obtaining the stress history of a structural detail during dynamic simulation is a challenging task; especially when the detail has a complex geometry. In particular, analyzing the stress history of every structural detail within a single finite element model can be overwhelming since the amount of nodal degrees of freedom needed in the model may require an impractical amount of computational effort. The purpose of computer simulation is to reduce amount of prototypes and speed up the product development process. Also, to take operator influence into account, real time models, i.e. simplified and computationally efficient models are required. This in turn, requires stress computation to be efficient if it will be performed during dynamic simulation. The research looks back at the theoretical background of multibody dynamic simulation and finite element method to find suitable parts to form a new approach for efficient stress calculation. This study proposes that, the problem of stress calculation during dynamic simulation can be greatly simplified by using a combination of floating frame of reference formulation with modal superposition and a sub-modeling approach. In practice, the proposed approach can be used to efficiently generate the relevant fatigue assessment stress history for a structural detail during or after dynamic simulation. In this work numerical examples are presented to demonstrate the proposed approach in practice. The results show that approach is applicable and can be used as proposed.

Clinical results of the use of mitotane for adrenocortical carcinoma

Mitotane (o,p'-DDD) acts mainly as an inhibitor of intramitochondrial pregnenolone and cortisol synthesis. Its adrenolytic effect depends on metabolic activation due to conversion to o,p'-DDA and o,p'-DDE. The drug has been used for 40 years in the treatment of adrenocortical carcinoma, mainly its regional and metastatic stage, as an adjuvant to surgical resection of the tumor. In the medical literature there are controversial opinions about its efficacy for the treatment of adrenocortical carcinoma. In our experience, mitotane administered immediately after surgery appeared to be much more efficient than when administered later. We have administered this drug in all cases of microscopically confirmed adrenocortical carcinoma, irrespectively of stage at the time of surgery, for fear of a false too optimistic classification. In our series of 82 patients with adrenocortical carcinoma, 59 patients have been treated with mitotane, 32 of them immediately after surgery, and 27 with a delay of 2 to 24 months. Today there are 18 survivors in the group of patients treated with mitotane soon after the operation and only 6 survivors in the group receiving mitotane with a delay. All patients were simultaneously given replacement therapy. Undesired effects of mitotane administration included increased aminotransferase and alkaline phosphatase activity, decreased white cell, platelet or red cell number, and myasthenia. Furthermore, we used mitotane with good results in Cushing's syndrome of non-malignant origin as pre-treatment before surgery or in long-term treatment for patients with poor tolerance of other adrenal inhibitors.

Clinical features of panic patients sensitive to hyperventilation or breath-holding methods for inducing panic attacks

Our aim was to compare the clinical features of panic disorder (PD) patients sensitive to hyperventilation or breath-holding methods of inducing panic attacks. Eighty-five PD patients were submitted to both a hyperventilation challenge test and a breath-holding test. They were asked to hyperventilate (30 breaths/min) for 4 min and a week later to hold their breath for as long as possible, four times with a 2-min interval. Anxiety scales were applied before and after the tests. We selected the patients who responded with a panic attack to just one of the tests, i.e., those who had a panic attack after hyperventilating (HPA, N = 24, 16 females, 8 males, mean age ± SD = 38.5 ± 12.7 years) and those who had a panic attack after breath holding (BHPA, N = 20, 11 females, 9 males, mean age ± SD = 42.1 ± 10.6 years). Both groups had similar (chi² = 1.28, d.f. = 1, P = 0.672) respiratory symptoms (fear of dying, chest/pain disconfort, shortness of breath, paresthesias, and feelings of choking) during a panic attack. The criteria of Briggs et al. [British Journal of Psychiatry, 1993; 163: 201-209] for respiratory PD subtype were fulfilled by 18 (75.0%) HPA patients and by 14 (70.0%) BHPA patients. The HPA group had a later onset of the disease compared to BHPA patients (37.9 ± 11.0 vs 21.3 ± 12.9 years old, Mann-Whitney, P < 0.001), and had a higher family prevalence of PD (70.8 vs 25.0%, chi² = 19.65, d.f. = 1, P = 0.041). Our data suggest that these two groups - HPA and BHPA patients - may be specific subtypes of PD.

The role of self-presentation in adolescent health risk behaviours

Self-presentation has been identified as playing a key role in the perfonnance of various potentially hazardous health behaviours such as substance abuse, eating disorders and reckless behaviours (Leary, Tchividjian, & Kraxberger, 1994; Martin & Leary, 2001; Martin, Leary, & O'Brien, 2001). The present study investigated the role of selfpresentation on adolescent health-risk behaviours. Specifically, this study examined the prevalence of adolescent identified health-risk behaviours rooted in self-presentational motives in youths aged 13-18 years. The current study also identified the specific images associated with these behaviours desired by youth, and the targets of these behaviours. Also, the relationship between these behaviours, and several trait measures (social physique anxiety, public-self consciousness, fear of negative evaluations, selfpresentational efficacy) of self-presentation were examined. Finally, the gender differences in health risk behaviours and self-presentational concerns were examined. Participants in the present study were 96 adolescent students, 34 male and 62 female, recruited from various private schools across Southern Ontario. Students ranged in age from 13 to 18 years for both males (M age = 15.81 years, SD = 1.49) and females (M age = 14.89 years, SD = 1.17) and ranged from grades 8 through 13. Results of the current study suggested that Canadian adolescents between the ages of 13 and 18 years participated in health risk behaviours for self-presentational purposes. Drinking alcohol, skipping school, and performing stunts and dares were identified as the most common health risk behaviours performed for self-presentational purposes by both males and females. Appearing fun and cool were the most commonly reported desired images while appearing brave and mature were the least reported. The most desired target group cited was same sex friends, followed by other sex friends. Trait measures of self-presentational concerns identified females as being higher in public self-consciousness, and social physique anxiety than males. Males were found to be higher in self-presentational efficacy than females. The total number of health risk behaviours was predicted by selfpresentational efficacy and social physique anxiety for males, and social physique anxiety for females. Findings of the current study suggest that Canadian adolescents' health risk behaviours are rooted, in part, in self-presentational motives. Thus far, an educational approach to health interventions has been favoured and/or adopted by teachers, health promoters, and educators (Jessor, 1992). Implications of the current study suggest that although educational interventions are beneficial in presenting the associated risks with certain activities and/or behaviours, one reason this type of approach may be ineffective in changing adolescent behaviour over the long run is that it does not address the strong and prominent influences of interpersonal motives on health damaging behaviour. It is evident that social acceptance and public image are of importance to adolescents, and the desire to make the "right" impression and to achieve peer approval and acceptance often override health and safety concerns (Jessor, 1992). Thus, a self-presentational approach focusing on changing the images associated with the behaviours may be more successful at deterring adolescent health risk behaviours.

The effects of postural threat on cognitive strategies used to maintain upright stance

It is well established that postural threat modifies postural control, although little is known regarding the underlying mechanism(s) responsible. It is possible that changes in postural control under conditions of elevated postural threat result from alterations in cognitive strategies. The purpose of this study was to determine the influence of elevated postural threat on cognitive strategies and to determine the relationship between postural control, psychological, and cognitive measures. It was hypothesized that elevated postural threat would cause a shift to more conscious control of posture. It was also expected that a relationship between fear of falling and postural control would exist that could be explained by changes in conscious control of posture. Forty-eight healthy young adults stood on a force plate at two different surface heights: ground level (LOW) and 3.2m above ground level (HIGH). Center of pressure (COP) summary measures calculated to quantify postural control were the mean position (AP-COP MP), root mean square (AP-COP RMS) and mean power frequency (AP-COP MPF) in the anteriorposterior direction. Trunk sway measures calculated in the pitch direction were trunk angle and trunk velocity. Psychological measures including perceived balance confidence, perceived fear of falling, perceived anxiety, and perceived stability were self reported. As a physiological indicator of anxiety, electrodermal activity was collected. The cognitive strategies assessed were movement reinvestment and attention focus. A modified state-sp-ecific version of the Movement Specific Reinvestment Scale was used to measure conscious motor processing (CMP) and movement self-consciousness (MSC). An attention focus questionnaire was developed to assess the amount of attention directed to internal and external sources. An effect of postural threat on cognitive strategies was observed as participants reported more conscious control and a greater concern or worry about their posture at the HIGH postural threat condition as well as an increased internal and external focus of attention. In addition changes in postural control, psychological, and physiological measures were found. The participants leaned away from the edge of the platform, the frequency of their postural adjustments increased, and the velocity of their trunk movements increased. Participants felt less confident, more fearful, more anxious, and less stable with an accompanying increase in physiological anxiety. Significant correlations between perceived anxiety, AP-COP MP, and cognitive measures revealed a possible relationship that could be mediated by cognitive measures. It was found that with greater conscious motor processing, more movement self-consciousness, and a greater amount of attention focused externally there was a larger shift of the mean position away from the edge of the platform. This thesis provides evidence that postural threat can influence cognitive strategies causing a shift to more conscious control of movement which is associated with leaning away from the edge of the platform. Shifting the position of the body away from the direction of the postural threat may reflect a cognitive strategy to ensure safety in this situation due to the inability to employ a stepping strategy when standing on an elevated platform.

Death anxiety and experiences of transcendence : peak experiences of skydivers

Terror Management Theory (TMT) suggests that human beings battle to protect ourselves from the potential terror resulting from the juxtaposition of our need for selfpreservation and our unique human ability to realize that we cannot avoid death. Over 150 studies have shown that when people are primed with the awareness of mortality they grasp onto their cultural world view more tenaciously than when they are primed with another unpleasant stimulus (i.e., show "cultural world view defense"). Applying the principles ofTMT, the first purpose of the present research was to examine whether the amount of peak experiences reduce the tendency to show cultural world view defense (an indicator of unconscious death fear) after a death prime. The second purpose was to examine a new model of implicit spirituality, by testing proposed relationships between implicit spirituality, peak experiences and intrinsic religiosity, and by testing whether peak experiences and/or intrinsic religiosity mediate the relationship between implicit spirituality and conscious and/or unconscious death fears. Skydivers were chosen as the primary participants for this research because of their unique characteristics in the context of TMT research. Previous research suggests that veteran skydivers have peak experiences as they skydive, and I assumed that their peak experiences would not be influenced by intrinsic religious beliefs. Novice skydivers may have their implicit spirituality brought forth because of their proximity to possible death. The willingness of both groups to place themselves close to death allowed their reactions to unconscious and conscious death fears to be assessed in a real setting. Novice skydivers' proximity to death made them an ideal group to study to see whether intrinsic religiosity mediated the relationship between their implicit spirituality and conscious and/or unconscious death fears. One hundred and twenty-five people participated in this research: 38 veteran and 46 novice skydivers, as well as 41 people who accompanied them to the drop zone. Of these, 23 veterans, 19 novices, and 22 friends returned a follow-up packet of questionnaires three weeks later. As expected, the veterans' unconscious death fear scores remained stable from pre-jump to post-jump (after the death prime), and three weeks later, whereas the novices' scores increased, but only marginally. As predicted, the novice skydivers' implicit spirituality was significantly higher than the veterans' and was negatively correlated with their conscious death fear, which was not mediated by their intrinsic religiosity. Only the novices' follow-up (trait) implicit spirituality correlated negatively with their pre-jump unconscious death fear. Among both groups of skydivers, there were significant relationships between implicit spirituality and peak experiences, and although the novices were significantly higher on peak experiences after the jump, peak experiences did not mediate the relationship between implicit spirituality and unconscious death fear for either group. In both groups follow-up intrinsic religiosity correlated with implicit spirituality. Peak experiences and intrinsic religiosity were not related with one another, suggesting that these are different ways of accessing an implicit spirituality. Results imply that implicit spirituality was brought forth (in the case of novice skydivers who were consciously close to death) and can be accessed through both peak experiences and intrinsic religiosity.

The convergence of psychopathy, self-rated vulnerability, and other-rated vulnerability

Previous research has found that victims of crime tend to exhibit asynchronous movement (e.g. Grayson & Stein, 1981), and the fact that victims display different body language suggests that they may be sending inadvertent signals to their own vulnerability (e.g. Murzynski & Degelman, 1996). Body language has also be en linked with s e l f identification as a victim (Wheeler et aI., 2009), and self-identification has be en found to act as a proxy for more severe victimization (Baumer, 2002) and greater fear of crime (Greenberg & Beach, 2004). The first prediction in the present study, then, was that self-perceived vulnerability would be correlated with body language, while number of previous victimizations mayor may not show the same relationship. Findings from the present study indicate that self-perceived vulnerability exhibits a positive correlation with the body language cues that approaches significance r (10) = .45,p =.07, one-tailed. Different types of victimization, however, were not significantly correlated with these cues. A second goal of the study was to examine the relationship between psychopathic traits and accuracy in judgments of vulnerability. Seventy male participants rated the vulnerability of 12 female targets filmed walking down a hallway who had provided selfratings of vulnerability. Individuals scoring higher on Factor 2 and total psychopathy were significantly less discrepant from target self-rat~ngs of vulnerability, r (64) = - .39,p < .001; r (64) = - .29,p >.01, respectively. The final purpose of this study was to determine which body language cues were mos t salient to raters when making judgments of vulnerability. Participants rated the apparent vulnerability of a target in 7 video clips portraying each body language cue in isolation and a natural walk. Results of repeated measures analyses indicate that the videos rated as most vulnerable to victimization were those displaying low energy and l a ck of synchrony, followed by wide stride, short stride, and stiffknees, while the video displaying ne ck stiffness did not receive significantly different ratings from the mode l ' s natural walk. Replication with a larger sample size is necessary to increase confidence in findings and implications.

Utilizing a Phenomenological Approach to Examine the Experience of Sexuality for Women Concerned about Urinary Incontinence following Spinal Cord Injury

Sexuality after spinal cord injury (SCI) is a complex issue that is influenced by a number of social, psychological and physiological factors, one of which is urinary incontinence (UI). Using a phenomenological approach, seven mixed methods interviews combining both the interview guide and standardized open-ended approaches were conducted to examine the experience of sexuality for women who are concerned about UI following SCI. Sexual function was one of the top priorities for the women after SCI, and UI was one of the main concerns the women had regarding sexuality. The findings of this study demonstrate that various dimensions of intimacy and the sexual experience as a whole were affected by UI, and the women discussed both physical and psychological concerns. The main issues regarding sexuality included concerns related to relationships, frustrations with limited sexual activities and the difficulty of being sexually satisfied, the number of unanswered questions and concerns, and a fear of being hurt or injured while participating in sexual activities. The main concerns regarding UI were embarrassment, the work and inconvenience involved with the clean-up of UI, bladder infections, the lack of accessible washrooms, and the negative effects of UI medications. When examining sexuality and UI together, the major issues were the constant comparison to the way things were before SCI, as well as the new concerns that the women did not have to worry about previously, worrying about how their partner would react if UI were to occur during sexual activity, and the impact of their own feelings toward UI on sexuality, a connection between pleasurable sexual sensations and UI as well as difficulty differentiating between the sensation of UI with the sensation of UI, dealing with infected urine during sexual activity, having to discuss UI with a new potential sexual partner, and a fear of rejection. Other identified issues included those related to body image, a lack of resources, Doctors who were inadequately educated regarding SCI, and issues related to both having and raising children. There is a significant shortage of information available for women with SCI to use as a resource regarding sexual function in general, and sexual function as it relates to UI. It is necessary that future work focus on creating resources to assist in this area, and that the dissemination of those resources becomes both appropriate and effective. Addressing sexual function and UI which are among the top concerns for this population has the opportunity to greatly improve quality of life (QOL) for these individuals.