Evaluating statistical methods used to estimate the number of postsynaptic receptors.

Calcium levels in spines play a significant role in determining the sign and magnitude of synaptic plasticity. The magnitude of calcium influx into spines is highly dependent on influx through N-methyl D-aspartate (NMDA) receptors, and therefore depends on the number of postsynaptic NMDA receptors in each spine. We have calculated previously how the number of postsynaptic NMDA receptors determines the mean and variance of calcium transients in the postsynaptic density, and how this alters the shape of plasticity curves. However, the number of postsynaptic NMDA receptors in the postsynaptic density is not well known. Anatomical methods for estimating the number of NMDA receptors produce estimates that are very different than those produced by physiological techniques. The physiological techniques are based on the statistics of synaptic transmission and it is difficult to experimentally estimate their precision. In this paper we use stochastic simulations in order to test the validity of a physiological estimation technique based on failure analysis. We find that the method is likely to underestimate the number of postsynaptic NMDA receptors, explain the source of the error, and re-derive a more precise estimation technique. We also show that the original failure analysis as well as our improved formulas are not robust to small estimation errors in key parameters.

Search for pair production of heavy top-like quarks decaying to a high-pT W boson and a b quark in the lepton plus jets final state at sqrts=7 TeV with the ATLAS detector

A search is presented for production of a heavy up-type quark (t') together with its antiparticle, assuming a significant branching ratio for subsequent decay into a W boson and a b quark. The search is based on 4.7 fb(-1) of pp collisions root s = 7 TeV recorded in 2011 with the ATLAS detector at the CERN Large Hadron Collider. Data are analyzed in the lepton + jets final state, characterized by a high-transverse-momentum isolated electron or muon, large missing transverse momentum and at least three jets. The analysis strategy relies on the substantial boost of the W bosons in the t'(t') over bar signal when m(t') greater than or similar to 400 GeV. No significant excess of events above the Standard Model expectation is observed and the result of the search is interpreted in the context of fourth-generation and vector-like quark models. Under the assumption of a branching ratio BR(t' -> W b) = I, a fourth-generation t' quark with mass lower than 656 GeV is excluded at 95% confidence level. In addition, in light of the recent discovery of a new boson of mass similar to 126 GeV at the LHC, upper limits are derived in the two-dimensional plane of BR(t' -> Wb) versus BR(t' -> Ht), where H is the Standard Model Higgs boson, for vector-like quarks of various masses.

The use of social media to communicate child health information to low-income parents: A formative study

The Internet, and specifically web 2.0 social media applications, offers an innovative method for communicating child health information to low-income parents. The main objective of this study was to use qualitative data to determine the value of using social media to reach low-income parents with child health information. A qualitative formative evaluation employing focus groups was used to determine the value of using social media for dissemination of child health information. Inclusion criteria included: (1) a parent with a child that attends a school in a designated Central Texas school district; and (2) English-speaking. The students who attend these schools are generally economically disadvantaged and are predominately Hispanic. The classic analysis strategy was used for data analysis. Focus group participants (n=19) were female (95%); White (53%), Hispanic (42%) or African American (5%); and received government assistance (63%). Most had access to the Internet (74%) and were likely to have low health literacy (53%). The most preferred source of child health information was the family pediatrician or general practitioner. Many participants were familiar with social media applications and had profiles on popular social networking sites, but used them infrequently. Objections to social media sites as sources of child health information included lack of credibility and parent time. Social media has excellent potential for reaching low-income parents when used as part of a multi-channel communication campaign. Further research should focus on the most effective type and format of messages that can promote behavior change in this population, such as story-telling. ^

Translating knowledge into action: Information needs of decision-makers in healthcare

Purpose: The purpose of this study was to assess the healthcare information needs of decision-makers in a local US healthcare setting in efforts to promote the translation of knowledge into action. The focus was on the perceptions and preferences of decision-makers regarding usable information in making decisions as to identify strategies to maximize the contribution of healthcare findings to policy and practice. Methods: This study utilized a qualitative data collection and analysis strategy. Data was collected via open-ended key-informant interviews from a sample of 37 public and private-sector healthcare decision-makers in the Houston/Harris County safety net. The sample was comprised of high-level decision-makers, including legislators, executive managers, service providers, and healthcare funders. Decision-makers were asked to identify the types of information, the level of collaboration with outside agencies, useful attributes of information, and the sources, formats/styles, and modes of information preferred in making important decisions and the basis for their preferences. Results: Decision-makers report acquiring information, categorizing information as usable knowledge, and selecting information for use based on the application of four cross-cutting thought processes or cognitive frameworks. In order of apparent preference, these are time orientation, followed by information seeking directionality, selection of validation processes, and centrality of credibility/reliability. In applying the frameworks, decision-makers are influenced by numerous factors associated with their perceptions of the utility of information and the importance of collaboration with outside agencies in making decisions as well as professional and organizational characteristics. Conclusion: An approach based on the elucidated cognitive framework may be valuable in identifying the reported contextual determinants of information use by decision-makers in US healthcare settings. Such an approach can facilitate active producer/user collaborations and promote the production of mutually valued, comprehensible, and usable findings leading to sustainable knowledge translation efforts long-term.^

Políticas de territorialización de indígenas en Chubut : Provincialización de las relaciones interétnicas a través del acceso a la tierra

En el presente artículo buscamos un doble objetivo. Por un lado, realizar una propuesta metodológica de lectura y análisis de presupuestos implícitos en los archivos estatales de tierras, construidos por el estado de la Provincia de Chubut. Por otro, nos abocamos al interior del discurso estatal a reconstruir las premisas que articularon las relaciones interétnicas entre el estado provincial y las familias indígenas, autoidentificadas como mapuche y mapuche-tehuelche. Tomamos como punto de partida con-ceptos como los de performance, contextualización y entextualización con la finalidad de (Bauman y Briggs, 2000) proponer una estrategia de análisis y reconstrucción de los marcos de referencia de los que partían los discursos estatales acerca del indígena y, al mismo tiempo, nos ocupamos de indagar cómo dichos marcos proveían de representaciones en curso a partir de las cuales se fijaba el sentido de las relaciones entre este grupo y el resto de la sociedad. El abordaje de las relaciones interétnicas entre el estado provincial y los indígenas requiere de un análisis desde una perspectiva histórica y multisituada. En consecuencia, cruzamos las sentencias de los archivos estatales con los posiciona-mientos de las narrativas indígenas y nos introducimos, entonces, en las particularidades de procesos conformación de comunidad provincial y de alterización de los indígenas al interior de las premisas que la primordializaban

Políticas de territorialización de indígenas en Chubut : Provincialización de las relaciones interétnicas a través del acceso a la tierra

En el presente artículo buscamos un doble objetivo. Por un lado, realizar una propuesta metodológica de lectura y análisis de presupuestos implícitos en los archivos estatales de tierras, construidos por el estado de la Provincia de Chubut. Por otro, nos abocamos al interior del discurso estatal a reconstruir las premisas que articularon las relaciones interétnicas entre el estado provincial y las familias indígenas, autoidentificadas como mapuche y mapuche-tehuelche. Tomamos como punto de partida con-ceptos como los de performance, contextualización y entextualización con la finalidad de (Bauman y Briggs, 2000) proponer una estrategia de análisis y reconstrucción de los marcos de referencia de los que partían los discursos estatales acerca del indígena y, al mismo tiempo, nos ocupamos de indagar cómo dichos marcos proveían de representaciones en curso a partir de las cuales se fijaba el sentido de las relaciones entre este grupo y el resto de la sociedad. El abordaje de las relaciones interétnicas entre el estado provincial y los indígenas requiere de un análisis desde una perspectiva histórica y multisituada. En consecuencia, cruzamos las sentencias de los archivos estatales con los posiciona-mientos de las narrativas indígenas y nos introducimos, entonces, en las particularidades de procesos conformación de comunidad provincial y de alterización de los indígenas al interior de las premisas que la primordializaban

Políticas de territorialización de indígenas en Chubut : Provincialización de las relaciones interétnicas a través del acceso a la tierra

En el presente artículo buscamos un doble objetivo. Por un lado, realizar una propuesta metodológica de lectura y análisis de presupuestos implícitos en los archivos estatales de tierras, construidos por el estado de la Provincia de Chubut. Por otro, nos abocamos al interior del discurso estatal a reconstruir las premisas que articularon las relaciones interétnicas entre el estado provincial y las familias indígenas, autoidentificadas como mapuche y mapuche-tehuelche. Tomamos como punto de partida con-ceptos como los de performance, contextualización y entextualización con la finalidad de (Bauman y Briggs, 2000) proponer una estrategia de análisis y reconstrucción de los marcos de referencia de los que partían los discursos estatales acerca del indígena y, al mismo tiempo, nos ocupamos de indagar cómo dichos marcos proveían de representaciones en curso a partir de las cuales se fijaba el sentido de las relaciones entre este grupo y el resto de la sociedad. El abordaje de las relaciones interétnicas entre el estado provincial y los indígenas requiere de un análisis desde una perspectiva histórica y multisituada. En consecuencia, cruzamos las sentencias de los archivos estatales con los posiciona-mientos de las narrativas indígenas y nos introducimos, entonces, en las particularidades de procesos conformación de comunidad provincial y de alterización de los indígenas al interior de las premisas que la primordializaban

Forest disturbance map for the Carpathian ecoregion, 1984-2012

Detailed knowledge of forest cover dynamics is crucial for many applications from resource management to ecosystem service assessments. Landsat data provides the necessary spatial, temporal and spectral detail to map and analyze forest cover and forest change processes. With the opening of the Landsat archive, new opportunities arise to monitor forest dynamics on regional to continental scales. In this study we analyzed changes in forest types, forest disturbances, and forest recovery for the Carpathian ecoregion in Eastern Europe. We generated a series of image composites at five year intervals between 1985 and 2010 and utilized a hybrid analysis strategy consisting of radiometric change classification, post-classification comparison and continuous index- and segment-based post-disturbance recovery assessment. For validation of the disturbance map we used a point-based accuracy assessment, and assessed the accuracy of our forest type maps using forest inventory data and statistically sampled ground truth data for 2010. Our Carpathian-wide disturbance map achieved an overall accuracy of 86% and the forest type maps up to 73% accuracy. While our results suggested a small net forest increase in the Carpathians, almost 20% of the forests experienced stand-replacing disturbances over the past 25 years. Forest recovery seemed to only partly counterbalance the widespread natural disturbances and clear-cutting activities. Disturbances were most widespread during the late 1980s and early 1990s, but some areas also exhibited extensive forest disturbances after 2000, especially in the Polish, Czech and Romanian Carpathians. Considerable shifts in forest composition occurred in the Carpathians, with disturbances increasingly affecting coniferous forests, and a relative decrease in coniferous and mixed forests. Both aspects are likely connected to an increased vulnerability of spruce plantations to pests and pathogens in the Carpathians. Overall, our results exemplify the highly dynamic nature of forest cover during times of socio-economic and institutional change, and highlight the value of the Landsat archive for monitoring these dynamics.

Multi-resolution model-based traffic sign detection and tracking

In this paper we propose an innovative approach to tackle the problem of traffic sign detection using a computer vision algorithm and taking into account real-time operation constraints, trying to establish intelligent strategies to simplify as much as possible the algorithm complexity and to speed up the process. Firstly, a set of candidates is generated according to a color segmentation stage, followed by a region analysis strategy, where spatial characteristic of previously detected objects are taken into account. Finally, temporal coherence is introduced by means of a tracking scheme, performed using a Kalman filter for each potential candidate. Taking into consideration time constraints, efficiency is achieved two-fold: on the one side, a multi-resolution strategy is adopted for segmentation, where global operation will be applied only to low-resolution images, increasing the resolution to the maximum only when a potential road sign is being tracked. On the other side, we take advantage of the expected spacing between traffic signs. Namely, the tracking of objects of interest allows to generate inhibition areas, which are those ones where no new traffic signs are expected to appear due to the existence of a TS in the neighborhood. The proposed solution has been tested with real sequences in both urban areas and highways, and proved to achieve higher computational efficiency, especially as a result of the multi-resolution approach.

Preliminary temperature accelerated life test (ALT) on lattice mismatched triple-junction concentrator solar cells-on-carriers

A temperature accelerated life test on concentrator lattice mismatched Ga0.37In0.63P/Ga0.83In0.17As/Ge triple-junction solar cells-on-carrier is being carried out. The solar cells have been tested at three different temperatures: 125, 145 and 165°C and the nominal photo-current condition (500X) is emulated by injecting current in darkness. The final objective of these tests is to evaluate the reliability, warranty period, and failure mechanism of these solar cells in a moderate period of time. Up to now only the test at 165°C has finished. Therefore, we cannot provide complete reliability information, but we have carried out preliminary data and failure analysis with the current results.

Nonlinear seismic behaviour of concrete arch bridges

Arch bridge structural solution has been known for centuries, in fact the simple nature of arch that require low tension and shear strength was an advantage as the simple materials like stone and brick were the only option back in ancient centuries. By the pass of time especially after industrial revolution, the new materials were adopted in construction of arch bridges to reach longer spans. Nowadays one long span arch bridge is made of steel, concrete or combination of these two as "CFST", as the result of using these high strength materials, very long spans can be achieved. The current record for longest arch belongs to Chaotianmen bridge over Yangtze river in China with 552 meters span made of steel and the longest reinforced concrete type is Wanxian bridge which also cross the Yangtze river through a 420 meters span. Today the designer is no longer limited by span length as long as arch bridge is the most applicable solution among other approaches, i.e. cable stayed and suspended bridges are more reasonable if very long span is desired. Like any super structure, the economical and architectural aspects in construction of a bridge is extremely important, in other words, as a narrower bridge has better appearance, it also require smaller volume of material which make the design more economical. Design of such bridge, beside the high strength materials, requires precise structural analysis approaches capable of integrating the combination of material behaviour and complex geometry of structure and various types of loads which may be applied to bridge during its service life. Depend on the design strategy, analysis may only evaluates the linear elastic behaviour of structure or consider the nonlinear properties as well. Although most of structures in the past were designed to act in their elastic range, the rapid increase in computational capacity allow us to consider different sources of nonlinearities in order to achieve a more realistic evaluations where the dynamic behaviour of bridge is important especially in seismic zones where large movements may occur or structure experience P - _ effect during the earthquake. The above mentioned type of analysis is computationally expensive and very time consuming. In recent years, several methods were proposed in order to resolve this problem. Discussion of recent developments on these methods and their application on long span concrete arch bridges is the main goal of this research. Accordingly available long span concrete arch bridges have been studied to gather the critical information about their geometrical aspects and properties of their materials. Based on concluded information, several concrete arch bridges were designed for further studies. The main span of these bridges range from 100 to 400 meters. The Structural analysis methods implemented in in this study are as following: Elastic Analysis: Direct Response History Analysis (DRHA): This method solves the direct equation of motion over time history of applied acceleration or imposed load in linear elastic range. Modal Response History Analysis (MRHA): Similar to DRHA, this method is also based on time history, but the equation of motion is simplified to single degree of freedom system and calculates the response of each mode independently. Performing this analysis require less time than DRHA. Modal Response Spectrum Analysis (MRSA): As it is obvious from its name, this method calculates the peak response of structure for each mode and combine them using modal combination rules based on the introduced spectra of ground motion. This method is expected to be fastest among Elastic analysis. Inelastic Analysis: Nonlinear Response History Analysis (NL-RHA): The most accurate strategy to address significant nonlinearities in structural dynamics is undoubtedly the nonlinear response history analysis which is similar to DRHA but extended to inelastic range by updating the stiffness matrix for every iteration. This onerous task, clearly increase the computational cost especially for unsymmetrical buildings that requires to be analyzed in a full 3D model for taking the torsional effects in to consideration. Modal Pushover Analysis (MPA): The Modal Pushover Analysis is basically the MRHA but extended to inelastic stage. After all, the MRHA cannot solve the system of dynamics because the resisting force fs(u; u_ ) is unknown for inelastic stage. The solution of MPA for this obstacle is using the previously recorded fs to evaluate system of dynamics. Extended Modal Pushover Analysis (EMPA): Expanded Modal pushover is a one of very recent proposed methods which evaluates response of structure under multi-directional excitation using the modal pushover analysis strategy. In one specific mode,the original pushover neglect the contribution of the directions different than characteristic one, this is reasonable in regular symmetric building but a structure with complex shape like long span arch bridges may go through strong modal coupling. This method intend to consider modal coupling while it take same time of computation as MPA. Coupled Nonlinear Static Pushover Analysis (CNSP): The EMPA includes the contribution of non-characteristic direction to the formal MPA procedure. However the static pushovers in EMPA are performed individually for every mode, accordingly the resulted values from different modes can be combined but this is only valid in elastic phase; as soon as any element in structure starts yielding the neutral axis of that section is no longer fixed for both response during the earthquake, meaning the longitudinal deflection unavoidably affect the transverse one or vice versa. To overcome this drawback, the CNSP suggests executing pushover analysis for governing modes of each direction at the same time. This strategy is estimated to be more accurate than MPA and EMPA, moreover the calculation time is reduced because only one pushover analysis is required. Regardless of the strategy, the accuracy of structural analysis is highly dependent on modelling and numerical integration approaches used in evaluation of each method. Therefore the widely used Finite Element Method is implemented in process of all analysis performed in this research. In order to address the study, chapter 2, starts with gathered information about constructed long span arch bridges, this chapter continuous with geometrical and material definition of new models. Chapter 3 provides the detailed information about structural analysis strategies; furthermore the step by step description of procedure of all methods is available in Appendix A. The document ends with the description of results and conclusion of chapter 4.

A reliability centered maintenance decision system for a discrete part manufacturing facility

This thesis develops and validates the framework of a specialized maintenance decision support system for a discrete part manufacturing facility. Its construction utilizes a modular approach based on the fundamental philosophy of Reliability Centered Maintenance (RCM). The proposed architecture uniquely integrates System Decomposition, System Evaluation, Failure Analysis, Logic Tree Analysis, and Maintenance Planning modules. It presents an ideal solution to the unique maintenance inadequacies of modern discrete part manufacturing systems. Well established techniques are incorporated as building blocks of the system's modules. These include Failure Mode Effect and Criticality Analysis (FMECA), Logic Tree Analysis (LTA), Theory of Constraints (TOC), and an Expert System (ES). A Maintenance Information System (MIS) performs the system's support functions. Validation was performed by field testing of the system at a Miami based manufacturing facility. Such a maintenance support system potentially reduces downtime losses and contributes to higher product quality output. Ultimately improved profitability is the final outcome. ^

Análise de falhas em rolamentos por análise de vibração aplicado a aerogeradores

With the heavy use of bearings in various segments of the industry, there are a large number of necessary interruptions in industrial processes to perform maintenance on these devices, with the case study wind turbines. The growth of the wind energy sector, encouraged to conduct research that helps to solve this problem. To contribute to predictive maintenance has been carried out a signal analysis using techniques which allow detection and location of the problem in order to prevent accidents caused and losses due to unexpected equipment failures, whereas low system rotation complicates the detection of the failure. To work around this problem, there was the indication of standard signals for defects in the bearings, making diagnosis of possible failures. With this diagnosis can be performed predictive maintenance, identifying the failure of the system that were tested, such as the introduction of grains of sand in the bearing, wear on the outer race of the bearing and bearing rust. By processing signals it is possible to construct graphs developing a mapping of defects by different peaks in the frequency band.

Narrativas em (re)construção : biografias de mulheres em processo de alfabetização e letramento no Instituto federal de Brasília

Dissertação apresentada para a obtenção do grau de mestre na especialidade de Educação Social e Intervenção Comunitária