948 resultados para end effect
Resumo:
The effects of the chain structure and the intramolecular interaction energy of an A/B copolymer on the miscibility of the binary blends of the copolymer and homopolymer C have been studied by means of a Monte Carlo simulation. In the system, the interactions between segments A, B and C are more repulsive than those between themselves. In order to study the effect of the chain structure of the A/B copolymer on the miscibility, the alternating, random and block copolymers were introduced in the simulations, respectively. The simulation results show that the miscibility of the binary blends strongly depends on the intramolecular interaction energy ((ε) over bar (AB)) between segments A and B within the A/B copolymers. The higher the repulsive interaction energy, the more miscible the A/B copolymer and homopolymer C are. For the diblock copolymer/homopolymer blends, they tend to form micro phase domains. However, the phase domains become so small that the blend can be considered as a homogeneous phase for the alternating copolymer/ homopolymer blends. Furthermore, the investigation of the average end-to-end distance ((h) over bar) in different systems indicates that the copolymer chains tend to coil with the decrease Of (ε) over bar (AB) whereas the (h) over bar of the homopolymer chains depends on the chain structure of the copolymers.
Resumo:
Three beta -blockers (propranolol, timolol, acebutolol) were separated by capillary electrophoresis (CE) and detected by end-column electrochemical detection (EC). In the present work, a carbon fiber (33 mum) electrode was used as the working electrode. The effect of the buffer concentration, buffer pH, detection potential and separation voltage on the separation of analytes and behavior of electrochemical detection was systematically investigated. The optimum conditions determined were as following: 40 cm length, 25 mum i.d. capillary; 17.5 kV separation voltage; 2 s injection at 15 kV; 70mM phosphate buffer, pH 3.5; detection potential + 1.2V (vs. Ag/AgCl). Under these conditions, the linear ranges of beta -blockers were over three orders of magnititude and the low detection limit of 10(-8)M was obtained. This method was also applied to detect the simulated urine sample.
Resumo:
The influence of physical aging on the tensile fracture behavior of notched Polyphenylquinoxaline (PPQ-E) samples has been studied. The dependence of fracture stress and strain on physical aging has been explained. The glass transition temperature (T-g) and the endothermic peak at the end of T-g transition with different physical aging were characterized using differential scanning calorimetry (DSC) and the results have also been explained. The morphology of fracture surface was observed by scanning electron microscopy (SEM). (C) 2000 John Wiley & Sons, Inc.
Resumo:
Capillary electrophoresis with amperometric detection is evaluated for the simultaneous determination of 2-aminothiazole (A), 2-amino-benzothiazole (AB), 2-mercaptobenzothiazole (AM). The cyclic voltammogram, hydrodynamic voltammogram, effect of pH, concentration of buffer and separation voltage on the separation and the detection were studied. The conditions were optimized as follows: 50 mM phosphate buffet; pH 6.0, 2s at 17.5 kV sample injection, separation at 17.5 kV, 1.2 V as detection potential. The method provided low detection limit as 0.5 mu M, 0.05 mu M and 0.01 mu M, wide linear range 2-200 mu M, 10-200 mu M and 0.025-100 mu M for A, AB, and AM, respectively. The variations in peak current and migration time for 15 consecutive injections of a standard containing 5 mu M each compound were 3.7, 2.1, and 3.9%, and 1.2, 0.8, and 1.2%, for A, AB and AM, respectively. This method was employed to analyze river water.
Resumo:
A capillary electrophoresis-amperometric detection system was developed for the determination of propranolol (PRO) at a 33 mu m carbon fiber microdisk electrode (CFE). The cyclic voltammogram, the hydrodynamic voltammograms and the effect of pH were studied. Under the optimum conditions: separation Voltage 15 kV; injection 3 s at 15 kV; 10 mM pH 7.5 phosphate buffer, 1.15 V (vs. Ag/AgCl) detection potential, the detection limit (LOD) for PRO was 0.05 mu M (S/N = 3). The response for PRO was linear over two orders of magnitude with a linear correlation coefficient of 0.994. The feasibility of this method was demonstrated by the detection of PRO in urine sample.
Resumo:
Determination of aesculin (AL) and aesculetin (AT) by capillary electrophoresis with end-column amperometric detection using a 33 mu m microdisk carbon fiber electrode is described. The HDVs, the effect of pH, buffer concentration, injection voltage, injection time and separation voltage on the peak current response (i(p)) of the analytes and the number of theoretical plates (N) were studied. The method has high sensitivity and good reproducibility. Under the optimum condition - 10 mM, pH 9.00 phosphate buffer, 4 s at 9 kV injection, separation at 15 kV and +1.0 V as the detection potential - low detection limits (S/N = 3) of 0.06 and 0.3 mu M were obtained for AL and AT, respectively. The calibration curve was linear over three orders of magnitude. The relative standard deviations (n = 15) of peak current and migration time were 3.9% and 4.6%, and 0.96% and 0.75% for 15 consecutive injections of 5 mu M AL and AT, respectively. The use of this method for the separation and detection of the two compounds present in the traditional Chinese medicine and human urine samples is also reported. (C) 1999 Elsevier Science B.V. All rights reserved.
Resumo:
Electrochemical detection of five species of aromatic amines at a carbon fiber microdisk electrode after separation by capillary electrophoresis is described. Under the optimum conditions, the detection limit for 3,4-dihydroxybenzylamine, N,N-dimethylaniline, p-phenylenediamine, p-aminophenol and aniline sulfate was 0.9, 0.03, 0.075, 1.2 and 0.15 mu M (S/N = 3), respectively. The linear response range was 5-1000, 0.1-500, 0.5-500, 5-500 and 1-200 mu M, respectively The effect of the electrode position and buffer pH on the detection was also studied. This method is very simple, sensitive and stable for the detection of these compounds.
Resumo:
End-linked hydroxyl-terminated polybutadiene containing unattached linear polybutadiene was used to study the effect of reptating species on the fracture mechanics of rubber networks. The concentration of reptating species in the networks ranged from 0 to 100%. The fracture mechanics of the networks was described using the critical strain energy release rate in mode III testing, i.e. the tearing energy. The tearing energy was measured at room temperature using a 'trouser' specimen at a strain rate spanning five logarithmic decades. When the strain rate was as low as 10(-4) s-1, the tearing energy of the networks increased with reduction in reptating species. In this case the reptating species did not contribute to the tearing energy of the networks due to relaxation. Hence, the tearing energy increased with the number of crosslinked chains per unit volume in the networks. At a strain rate ranging from 10(-3) to 10(-1) s-1, the tearing energy of the networks was governed by local viscosity. The tearing energies of the networks containing various amounts of reptating species were superimposed to give a master curve based on the Williams-Landel-Ferry equation.
Resumo:
A sporeling culture method using gametophyte clones developed in the early 1990s led to egg discharge occurring in the dark 5 min after the start of the dark period under growth under a 11:13 L-D photoperiod. The course of egg discharge could be disturbed by light, with irradiance as low as 5-6 mu mol photon m(-2) s(-1) causing 75-80% of the discharged eggs to detach from the oogonia and consequently to die within several hours. In order to enhance outgrowth rate of young sporophytes, a study was conducted to test the effect of controlling darkness in the period 2-3 h after dusk. When the slides were transferred from the standard 11:13 L-D regime to continuous light, eggs were discharged 5 min after the end of the light phase and peaked 5-l5 min later on first day after transfer, indicating that the female gametes "remember" the light-dark regime. This suggests the existence of an endogenous circadian rhythm. During the second and third days, very few eggs were discharged throughout the 11 h of the normal light phase of the L-D regime, indicating the inhibitory effect of continuous light and that the rhtyhm is easily damped by light.
Resumo:
The effect of water temperature on gut mass and digestive enzyme activity in sea cucumber Apostichopus japonicus, including relative gut mass (RGM), amylase, lipase, pepsin and trypsin activities were studied at temperatures of 7, 14, 21, and 28A degrees C over a period of 40 days. Results show that RGM significantly decreased after 40 days at 21A degrees C and markedly decreased over the whole experiment period at 28A degrees C; however, no significant effect of duration was observed at 7 or 14A degrees C. At 14A degrees C, trypsin activity significantly decreased over 10 and 20 days, then increased; amylase and trypsin activity significantly decreased after 40 days at 28A degrees C. However, no significant effect of duration was found on amylase, pepsin or trypsin activities in the other temperature treatment groups. At 28A degrees C, lipase activity peaked in 20 days and then markedly decreased to a minimum at the end of the experiment. On the other hand, pepsin activity at 28A degrees C continuously increased over the whole experimental period. Principle component analysis showed that sea cucumbers on day 40 in the 21A degrees C group and in the previous 20 days in the 28A degrees C group were in the prophase of aestivation. At 28A degrees C, sea cucumbers aestivated at 30-40 days after the start of the experiment. It is concluded that the effect of temperature on the digestion of A. japonicus is comparatively weak within a specific range of water temperatures and aestivation behavior is accompanied by significant changes in RGM and digestive enzyme activities.
Resumo:
In order to observe the effect of salinity on disease resistance and white spot syndrome virus (WSSV) proliferation in Fenneropenaeus chinensis, shrimps with latent WSSV were subjected to two acute salinity changes from the original salinity of 22 ppt to 18 and 14 ppt in an hour, respectively. The total haemocyte count (THC) of the challenged group showed no evident change under salinity adjustments, but the phenoloxidase (PO) index declined significantly (P<0.05) corresponding to continuing acute salinity changes from the 24th to the 72nd hour. According to the WSSV load detected by quantitative real-time PCR method, it was found that WSSV carried by the challenged group and control group were significantly different (P<0.05); acute salinity change from 22 to 14 ppt led to the WSSV carried in the challenged group being significantly higher (P<0.05) than that of those surviving in 22 ppt, but salinity change from 22 to 18 ppt had no such effect. At the end of the 72-h experiment, the challenged group subjected to salinity change from 22 to 14 ppt had nearly 3 times the WSSV load as the control group with no salinity change. Therefore, salinity changes over a particular range could result in a decrease of immunocompetence and obvious WSSV proliferation in the shrimps, leading to white spot syndrome developing from a latent infection to an acute outbreak. (C) 2005 Elsevier B.V All rights reserved.
Resumo:
The objective of this study was to investigate the effects of tannic acid on the gworth and survival of small mammalian berbirvores. Measurements were conducted with weaned root voles fed with 3% or 6% tannic acid and 10% or 20% protein in their diets. The results indicated that the effect of tannic acid on growth rate of weaned root voles was greater when given a lower protein diet than a higher protein diet. After 20 d, with 10% protein diets, mean growth rates of the weaned voles fed with 3% or 6% tannic acid were -0.135 g/d and -0.25 g/d, respectively. When given 20% protein diet, mean growth rates of weaned root voles fed with 3% and 6% tannic acid for 20 d were 0.134 g/d and -0.116 g/d, respectively. Food utilization efficiencies of the voles fed with 3% and 6% tannic acid diets were significantly lower than that of the control diet at the level of 10% protein. When given the 20% protein diet, food utilization efficiencies of weaned voles fed with 6% tannic acid were significantly lower than that of the voles fed with 3% tannic acid diet or the control diet with the 10% protein diets, the average survival days of the weaned voles fed with 3% and 6% tannic acid diets decreased 26.23% and 49.36% compared to controls at the end of trial period, respectively. With 20% protein diets, the average survival of weaned voles given 6% tannic acid diet decreased 39.41% compared to controls at the end of trial period, although weaned voles given 3% tannic acid had a slight decrease of average survival days. The results of study suggested that tannins could substanitially affect the individual performance of weaned root voles.
Resumo:
The objective of this paper is to investigate the effect of the pad size ratio between the chip and board end of a solder joint on the shape of that solder joint in combination with the solder volume available. The shape of the solder joint is correlated to its reliability and thus of importance. For low density chip bond pad applications Flip Chip (FC) manufacturing costs can be kept down by using larger size board pads suitable for solder application. By using “Surface Evolver” software package the solder joint shapes associated with different size/shape solder preforms and chip/board pad ratios are predicted. In this case a so called Flip-Chip Over Hole (FCOH) assembly format has been used. Assembly trials involved the deposition of lead-free 99.3Sn0.7Cu solder on the board side, followed by reflow, an underfill process and back die encapsulation. During the assembly work pad off-sets occurred that have been taken into account for the Surface Evolver solder joint shape prediction and accurately matched the real assembly. Overall, good correlation was found between the simulated solder joint shape and the actual fabricated solder joint shapes. Solder preforms were found to exhibit better control over the solder volume. Reflow simulation of commercially available solder preform volumes suggests that for a fixed stand-off height and chip-board pad ratio, the solder volume value and the surface tension determines the shape of the joint.
Resumo:
Coeliac disease is one of the most common food intolerances worldwide and at present the gluten free diet remains the only suitable treatment. A market overview conducted as part of this thesis on nutritional and sensory quality of commercially available gluten free breads and pasta showed that improvements are necessary. Many products show strong off-flavors, poor mouthfeel and reduced shelf-life. Since the life-long avoidance of the cereal protein gluten means a major change to the diet, it is important to also consider the nutritional value of products intending to replace staple foods such as bread or pasta. This thesis addresses this issue by characterising available gluten free cereal and pseudocereal flours to facilitate a better raw material choice. It was observed that especially quinoa, buckwheat and teff are high in essential nutrients, such as protein, minerals and folate. In addition the potential of functional ingredients such as inulin, β-glucan, HPMC and xanthan to improve loaf quality were evaluated. Results show that these ingredients can increase loaf volume and reduce crumb hardness as well as rate of staling but that the effect diverges strongly depending on the bread formulation used. Furthermore, fresh egg pasta formulations based on teff and oat flour were developed. The resulting products were characterised regarding sensory and textural properties as well as in vitro digestibility. Scanning electron and confocal laser scanning microscopy was used throughout the thesis to visualise structural changes occurring during baking and pasta making
Resumo:
BACKGROUND: The impact of aromatase inhibitors (AIs) on non-cancer-related outcomes, which are known to be affected by oestrogens, has become increasingly important in postmenopausal women with hormone-dependent breast cancer. So far, data related to the effect of AIs on lipid profile in postmenopausal women is scarce. This study, as a companion substudy of an EORTC phase II trial (10951), evaluated the impact of exemestane, a steroidal aromatase inactivator, on the lipid profile of postmenopausal metastatic breast cancer (MBC) patients. PATIENTS AND METHODS: The EORTC trial 10951 randomised 122 postmenopausal breast cancer patients to exemestane (E) 25 mg (n = 62) or tamoxifen (T) 20 mg (n = 60) once daily as a first-line treatment in the metastatic setting. Exemestane showed promising results in all the primary efficacy end points of the trial (response rate, clinical benefit rate and response duration), and it was well tolerated with low incidence of serious toxicity. As a secondary end point of this phase II trial, serum triglycerides (TRG), high-density lipoprotein cholesterol (HDL), total cholesterol (TC), lipoprotein a (Lip a), and apolipoproteins (Apo) B and A1 were measured at baseline and while on therapy (at 8, 24 and 48 weeks) to assess the impact of exemestane and tamoxifen on serum lipid profiles. Of the 122 randomised patients, those who had baseline and at least one other lipid assessment are included in the present analysis. The patients who received concomitant drugs that could affect lipid profile are included only if these drugs were administered throughout the study treatment. Increase or decrease in lipid parameters within 20% of baseline were considered as non-significant and thus unchanged. RESULTS: Seventy-two patients (36 in both arms) were included in the statistical analysis. The majority of patients had abnormal TC and normal TRG, HDL, Apo A1, Apo B and Lip a levels at baseline. Neither exemestane nor tamoxifen had adverse effects on TC, HDL, Apo A1, Apo B or Lip a levels at 8, 24 and 48 weeks of treatment. Exemestane and tamoxifen had opposite effects on TRG levels: exemestane lowered while tamoxifen increased TRG levels over time. There were too few patients with normal baseline TC and abnormal TRG, HDL, Apo A1, Apo B and Lip a levels to allow for assessment of E's impact on these subsets. The atherogenic risk determined by Apo A1:Apo B and TC:HDL ratios remained unchanged throughout the treatment period in both the E and T arms. CONCLUSIONS: Overall, exemestane has no detrimental effect on cholesterol levels and the atherogenic indices, which are well-known risk factors for coronary artery disease. In addition, it has a beneficial effect on TRG levels. These data, coupled with E's excellent efficacy and tolerability, support further exploration of its potential in the metastatic, adjuvant and chemopreventive setting.