972 resultados para electricity generation costs
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA
Desenvolvimento e implantação de um sistema para monitoração do desempenho energético de edificações
Resumo:
Este trabalho apresenta as estratégias e convenções adotadas, assim como os módulos em funcionamento, do sistema de monitoração desenvolvido e que está sendo implantado na edificação do Grupo de Estudos e Desenvolvimento de Alternativas Energéticas (GEDAE), denominada de Laboratório de Energias Renováveis e Eficiência Energética, com o objetivo de monitorar principalmente as variáveis climáticas e aquelas referentes à geração e ao consumo da edificação. Com esse sistema, objetiva-se a criação de uma base de dados unificada, sincronizada e de fácil acesso aos usuários da edificação, bem como a criação de ferramentas personalizáveis pelos usuários para a análise dos dados coletados e com possibilidade de expansão para a inserção de novas grandezas de interesse, facilitando, desta forma, estudos a respeito do desempenho da edificação quanto ao seu consumo de energia elétrica, seus sistemas de produção de eletricidade e condições de conforto ambiental no interior da edificação, além de permitir a análise das estratégias adotadas na edificação. Espera-se que os dados coletados possam também exercer a função de divulgação de estratégias de eficiência energética em edificações por meio da publicação de alguns resultados na internet em uma página dinâmica para tal fim.
Resumo:
A experiência internacional indica a existência de cinco alavancas principais comumente relacionadas à expansão do consumo de gás natural: a) disponibilidade de reservas de gás natural; b) restrições à oferta de outros energéticos (especialmente para a geração de eletricidade); c) preocupação com o meio ambiente em uma legislação ambiental cada dia mais rigorosa; d) liberalização de empresas privadas na distribuição e comercialização de gás natural, atraindo investimentos; e) liberalização da indústria, atraindo investimentos privados, como opção. Dentro desse cenário, as obras de construção do gasoduto Coari (Base de Extração Urucu)-Manaus, com cerca de 670 quilômetros de extensão total, ficarão prontas em abril de 2008 conforme previsão da Petrobrás divulgada no dia 21/05/2007, o qual transportará 4,7 milhões de metros cúbicos por dia de gás natural na primeira fase de operação. O investimento total previsto é de R$2,4 bilhões. O gás natural substituirá o diesel e o óleo combustível usados principalmente na produção de grande parte da energia elétrica consumida no Estado do Amazonas. Será usado também nos processos industrial e comercial, bem como para abastecer veículos automotores (automóveis, pickups, caminhões leves, ônibus) com segurança. Essa última aplicação incentivou por excelência esta dissertação, fazendo uma análise técnico-econômica da substituição parcial do combustível diesel pelo gás natural em motores marítimos na região Amazônica, pois as embarcações são veículos que singram os rios da Amazônia, usados no transporte de carga e passageiros. Demonstra primeiramente que é possível tecnicamente a conversão dos motores diesel para consumirem diesel misturado com gás natural às taxas de substituição de diesel por gás natural de 5% a 90%, usando tecnologias já disponíveis no mercado brasileiro, sob a ótica de desempenho energético e ambiental. Posteriormente apresenta uma análise econômica da conversão, levando em consideração os reservatórios para gás natural comprimido - GNC ofertados no mercado nacional e os kits de conversão, em que ficam demonstradas: a) a viabilidade econômica do empreendimento, se desprezados os pesos e os volumes dos reservatórios de gás natural comprimido, principalmente os pesos; b) a inviabilidade econômica, considerando o transporte dos reservatórios nas embarcações como fretes que deixaram de gerar receitas pelos volumes e pesos ocupados nelas.
Resumo:
The aim of this work is to make a qualitatively and ecologically evaluation of a compact cogeneration system that operates with synthesis gas obtained from a gasifier. Using the Eucalyptus Biomass as fuel, that passes through a wood gasifier (Drowndraft type) and supply the internal combustion engine. The compact cogeneration system is composed of two heat exchangers, an energy generator connected to an internal combustion engine and an absorption refrigeration system. The complete system is installed in the laboratory from the Energy Department at the University of Guaratinguetá. By the analysis related to the First and Second Thermodynamic Laws applied in this system, was possible to identify the mass flows in each point, energetic efficiency, irreversibility and exergetic efficiency. The components that have the biggest irreversibilities are the gasifier, followed by the internal combustion engine, which should be focused in future improvements. The system efficiency in energetic basis is 51,84% and in exergetic basis is 22,78%. Using the ecologic efficiency methodology was possible to identify the emissions rates, the pollution indicator associated to the combustion of the synthesis gas in the internal combustion engine. The ecologic efficiency considering the energectic analysis is 91,73%, while considering the exergetic analysis, 83,65%. It is concluded that the use of the synthesis gas in a compact cogeneration system is viable from the technical and ecological point of view, making possible to generate energy for isolated communities and promoting the decentralized electricity generation
Resumo:
The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading
Resumo:
In recent years, increasing demand for energy has led to studies to increase the amount of electricity produced. Due to this fact, more and more boilers are becoming important sources of electricity generation. To raise the efficiency of energy generated in the boilers is necessary to raise the steam pressure and temperature to values previously unimaginable. The use of more resistant materials and maintenance practices and most appropriate operation made it possible. The objective of this study is to test the main types of failure in a chemical recovery boiler, in particular due to fatigue in the superheater, because it is a component subjected to high temperatures and thus more subject to different failures. In this manner this study aims to reduce the incidence of unscheduled maintenance shutdowns, increasing the operation time under appropriate conditions. Modeling performed in this study, the failure did not occur, because we considered only the mechanical stress. Under normal conditions, mechanical stress in combination with thermal stresses can cause cracks in the tubes due to cyclical stresses, leading to fatigue failure
Resumo:
This paper presents a study based on literature and examples found on literature of the potential of petroleum gas to be used as a primary source to generate electricity. The steady increase electricity demand in Brazil makes desirable an effective use of all available primary sources, combined with this need the momentum of the country with the discovery of the presalt reserves becomes interesting the use of this gas, often wasted, for generating electricity. The electricity generation in this work is illustrated by the cogeneration in oil refining plants that have the combined cycle thermal operation. The ultimate goal is to provide a text to identify the advantages, disadvantages and trends of this type of generation
Resumo:
The renewable energy sources presents an important role on the world's current context, its growing is essentially connected to the environmental issues and the energetic security, guided by the search for alternatives of energy. Among the alternative energy sources, the wind energy shows great importance in the brazilian territory, it has a great potential still unexplored and constant growth in the national electric matrix. The specific factor of generation, the conjuncture and the incentive politics influence on the expansion of wind energy in Brazil. Thus, the brazilian wind sector shows features which can be evaluated enable its developing. Keeping that in mind, the present work aims identify which are the advantages and the difficulties for the expansion of this energy source in the brazilian electric matrix. For that, the work studies the different parameters: features of electric generation of the different energy sources, incentive politics, generation costs, CO2 emission, evolution of wind energy in Brazil, the brazilian wind potential, and the regime of complementarily hydro-wind
Resumo:
Pós-graduação em Engenharia Mecânica - FEG
Resumo:
Pós-graduação em Engenharia Mecânica - FEG
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Interventions in nature made by man are very common since the beginnings of human history, especially in the case regarding the storage of water. The construction of dams have been and still are fundamental in maintaining human life due to the vital importance that water plays. The size of these structures vary according to need, such as water catchment, fish-farming or electricity generation. Embankment dams are the most common type of these structures. Can be defined as dams natural material obtained from loan chambers located near the dam site. This type of barrier may be divided into earth dams and rockfill dams. The study area covers an earth dam located in Cordeirópolis (SP) and is essentially composed of diabases altered soil of the Serra Geral Formation of the Paraná Basin. With the aid of geophysics, more specifically of the Electrical Resistivity method, the aim is to check any water infiltration zones in the dam's body. Given the risks associated with water seepage in earth dams, that may generate breakdown structures, erosion, and consequently accidents and / or harmful factors in the nearby areas. One of the main structural problems married by water infiltration is the possible generation of pipes that could jeopardize the dam structure. This work aims to contribute towards the evaluation of the effectiveness of using an indirect technique of research and monitoring in aid to direct research techniques such as piezometers and drive stakes. The results are presented in the form of 2D and 3D geophysical models, the analysis shows a low resistivity zone with typical values of the presence of humidity originating upstream of the dam and downstream bottleneck trend, that are the basis for interpretation by percolation or not water in the dam
Resumo:
Currently there are two car models that use electricity in their propulsion systems, the electric vehicle and the hybrid electric vehicle. The electric vehicles are classified as vehicles that use electric motors in their propulsion system and batteries as a power source, on the other hand, the hybrid vehicles are classified as vehicles that use both electric motors and internal combustion engines in their propulsion system, using both batteries and líquid fuels as a power source. The main goal of this work is to analyze the characteristics of electric and hybrid electric vehicles and demonstrate the unfeasibility of the electric vehicle in the current economic, political, energetic and environmental brazilian scenario, for this purpose it was realized a study about the current brazilian situation regarding to electricity generation, current conservation status of road network, lack of electrical infrastructure for charging batteries, national lithium reserves, environmental characteristics, tax incentives, economic scenario, oil market and political positioning related to the implantation of electric or hybrid electric fleets in nacional territory. The operational characteristics analysis of electric and hybrid electric vehicles in this current scenario leads to the conclusion that currently a growth of electric vehicles fleets on a national scale is totally impractical in the Brazil, Thus, the introduction of green vehicles probably will occur primarily with hybrid electric models, motivated mainly due the bigger autonomy of this models compared to electric models, lower cost of hybrid electric models compared to electric models, factors related to the lack of recharging infrastructure and also factors related to political positioning