Trends in hospital admission for stroke in Calgary

Background Stroke incidence has fallen since 1950. Recent trends suggest that stroke incidence may be stabilizing or increasing. We investigated time trends in stroke occurrence and in-hospital morbidity and mortality in the Calgary Health Region. Methods All patients admitted to hospitals in the Calgary Health Region between 1994 and 2002 with a primary discharge diagnosis code (ICD-9 or ICD-10) of stroke were included. In-hospital strokes were also included. Stroke type, date of admission, age, gender,discharge disposition (died, discharged) and in-hospital complications (pneumonia, pulmonary embolism, deep venous thrombosis) were recorded. Poisson and simple linear regression was used to model time trends of occurrence by stroke type and age-group and to extrapolate future time trends. Results From 1994 to 2002, 11642 stroke events were observed. Of these, 9879 patients (84.8%) were discharged from hospital, 1763 (15.1%) died in hospital, and 591 (5.1%) developed in-hospital complications from pneumonia, pulmonary embolism or deep venous thrombosis. Both in-hospital mortality and complication rates were highest for hemorrhages. Over the period of study, the rate of stroke admission has remained stable. However, total numbers of stroke admission to hospital have faced a significant increase (p=0.012) due to the combination of increases in intracerebral hemorrhage (p=0.021) and ischemic stroke admissions (p=0.011). Sub-arachnoid hemorrhage rates have declined. In-hospital stroke mortality has experienced an overall decline due to a decrease in deaths from ischemic stroke, intracerebral hemorrhage and sub-arachnoid hemorrhage. Conclusions Although age-adjusted stroke occurrence rates were stable from 1994 to 2002, this is associated with both a sharp increase in the absolute number of stroke admissions and decline in proportional in-hospital mortality. Further research is needed into changes in stroke severity over time to understand the causes of declining in-hospital stroke mortality rates.

A factor 5 water saving with a cooling systems innovation

Melbourne-based manufacturer Muller Industries Australia’s new cooling system saves 80 per cent of the average water usage in commercial office buildings that use water-based cooling towers.

The QUT-NOISE-SRE protocol for the evaluation of noisy speaker recognition

The QUT-NOISE-SRE protocol is designed to mix the large QUT-NOISE database, consisting of over 10 hours of back- ground noise, collected across 10 unique locations covering 5 common noise scenarios, with commonly used speaker recognition datasets such as Switchboard, Mixer and the speaker recognition evaluation (SRE) datasets provided by NIST. By allowing common, clean, speech corpora to be mixed with a wide variety of noise conditions, environmental reverberant responses, and signal-to-noise ratios, this protocol provides a solid basis for the development, evaluation and benchmarking of robust speaker recognition algorithms, and is freely available to download alongside the QUT-NOISE database. In this work, we use the QUT-NOISE-SRE protocol to evaluate a state-of-the-art PLDA i-vector speaker recognition system, demonstrating the importance of designing voice-activity-detection front-ends specifically for speaker recognition, rather than aiming for perfect coherence with the true speech/non-speech boundaries.

An elegy for Greg Ham: Copyright law, the Kookaburra case, and remix culture

The ‘Kookaburra’ case was a tragic and controversial copyright dispute, highlighting the need for copyright law reform by the Australian Parliament. In the Kookaburra case, a copyright action was brought by Larrikin Records against Men at Work’s song ‘Down Under’, alleging copyright infringement of the ‘Kookaburra’ song composed by Marion Sinclair. The dispute raised a host of doctrinal matters. There was disquiet over the length of the copyright term. There were fierce contests as to the copyright ownership of the ‘Kookaburra’ song. The litigation raised questions about copyright infringement and substantiality – particularly in relation to musical works. The ‘Kookaburra’ case highlighted frailties in Australia’s regime of copyright exceptions. The litigation should spur the Australian Law Reform Commission to make recommendations for law reform in its inquiry Copyright and the Digital Economy. This article provides a critical evaluation of the options of a defence for transformative use; a defence for fair use; and statutory licensing. The ‘Kookaburra’ case also examines the question of appropriate remedies in respect of copyright infringement. The conclusion considers the implications of the Kookaburra case for other forms of musical works – including digital sampling, mash-ups, and creative remixes. It finishes with an elegy for Greg Ham – paying tribute to the multi-instrumentalist for Men at Work.

Expectation and variation with a virtual die

By the time students reach the middle years they have experienced many chance activities based on dice. Common among these are rolling one die to explore the relationship of frequency and theoretical probability, and rolling two dice and summing the outcomes to consider their probabilities. Although dice may be considered overused by some, the advantage they offer is a familiar context within which to explore much more complex concepts. If the basic chance mechanism of the device is understood, it is possible to enter quickly into an arena of more complex concepts. This is what happened with a two hour activity engaged in by four classes of Grade 6 students in the same school. The activity targeted the concepts of variation and expectation. The teachers held extended discussions with their classes on variation and expectation at the beginning of the activity, with students contributing examples of the two concepts from their own experience. These notions are quite sophisticated for Grade 6, but the underlying concepts describe phenomena that students encounter every day. For example, time varies continuously; sporting results vary from game to game; the maximum temperature varies from day to day. However, there is an expectation about tomorrow’s maximum temperature based on the expert advice from the weather bureau. There may also be an expectation about a sporting result based on the participants’ previous results. It is this juxtaposition that makes life interesting. Variation hence describes the differences we see in phenomena around us. In a scenario displaying variation, expectation describes the effort to characterise or summarise the variation and perhaps make a prediction about the message arising from the scenario. The explicit purpose of the activity described here was to use the familiar scenario of rolling a die to expose these two concepts. Because the students had previously experienced rolling physical dice they knew instinctively about the variation that occurs across many rolls and about the theoretical expectation that each side should “come up” one-sixth of the time. They had observed the instances of the concepts in action, but had not consolidated the underlying terminology to describe it. As the two concepts are so fundamental to understanding statistics, we felt it would be useful to begin building in the familiar environment of rolling a die. Because hand-held dice limit the explorations students can undertake, the classes used the soft-ware TinkerPlots (Konold & Miller, 2011) to simulate rolling a die multiple times.

Exploring accuracy factors in cost estimating practice towards implementing Building Information Modelling (BIM)

Cost estimating has been acknowledged as a crucial component of construction projects. Depending on available information and project requirements, cost estimates evolve in tandem with project lifecycle stages; conceptualisation, design development, execution and facility management. The premium placed on the accuracy of cost estimates is crucial to producing project tenders and eventually in budget management. Notwithstanding the initial slow pace of its adoption, Building Information Modelling (BIM) has successfully addressed a number of challenges previously characteristic of traditional approaches in the AEC, including poor communication, the prevalence of islands of information and frequent reworks. Therefore, it is conceivable that BIM can be leveraged to address specific shortcomings of cost estimation. The impetus for leveraging BIM models for accurate cost estimation is to align budgeted and actual cost. This paper hypothesises that the accuracy of BIM-based estimation, as more efficient, process-mirrors of traditional cost estimation methods, can be enhanced by simulating traditional cost estimation factors variables. Through literature reviews and preliminary expert interviews, this paper explores the factors that could potentially lead to more accurate cost estimates for construction projects. The findings show numerous factors that affect the cost estimates ranging from project information and its characteristic, project team, clients, contractual matters, and other external influences. This paper will make a particular contribution to the early phase of BIM-based project estimation.

UWB channel measurement and data transfer analysis for multiuser Infostation applications

In this paper, the results of the time dispersion parameters obtained from a set of channel measurements conducted in various environments that are typical of multiuser Infostation application scenarios are presented. The measurement procedure takes into account the practical scenarios typical of the positions and movements of the users in the particular Infostation network. To provide one with the knowledge of how much data can be downloaded by users over a given time and mobile speed, data transfer analysis for multiband orthogonal frequency division multiplexing (MB-OFDM) is presented. As expected, the rough estimate of simultaneous data transfer in a multiuser Infostation scenario indicates dependency of the percentage of download on the data size, number and speed of the users, and the elapse time.

A benchmark for numerical scheme validation of airborne particle exposure in street canyons

Measurements of particle concentrations and distributions in terms of number, surface area, and mass were performed simultaneously at eight sampling points within a symmetric street canyon of an Italian city. The aim was to obtain a useful benchmark for validation of wind tunnel experiments and numerical schemes: to this purpose, the influence of wind directions and speeds was considered. Particle number concentrations (PNCs) were higher on the leeward side than the windward side of the street canyon due to the wind vortex effect. Different vertical PNC profiles were observed between the two canyon sides depending on the wind direction and speed at roof level. A decrease in particle concentrations was observed with increasing rooftop wind speed, except for the coarse fraction indicating a possible particle resuspension due to the traffic and wind motion. This study confirms that particle concentration fields in urban street canyons are strongly influenced by traffic emissions and meteorological parameters, especially wind direction and speed.

You're hot, then you're cold: Creative industries policy making in Australia

Much compelling evidence has emerged over the last two decades demonstrating the importance of Australia’s creative industries. In 2014, the Australian Bureau of Statistics confirmed that culture is ‘big business’ in this country. Yet despite this, interest by policy makers at all levels of government has been intermittent, at best. This chapter gives a brief history of policy development, and offers a number of reasons for why policy and politics have not focussed more resolutely on Australia’s creative economy. It finishes with a discussion of Australia’s ‘unfinished agenda’, one which demands attention not only by government, but also industry and higher education, if we are to properly meet both the challenges and opportunities before us.

The creative fulcrum : Where, how and why the creative workforce is growing

Contrary to the view that the creative workforce is shrinking, a decade of detailed research by the ARC Centre of Excellence for Creative Industries and Innovation (CCI) shows that the number of workers in creative occupations is growing strongly, and that these workers are spread right across the whole economy. Furthermore, these occupations can be thought of as a ‘creative fulcrum’ for innovations that leverage competitiveness in all sectors, and create positive job spirals that stimulate opportunities for many other occupation categories.

The effect of surface tension in porous wave maker problems

Using a mixed-type Fourier transform of a general form in the case of water of infinite depth and the method of eigenfunction expansion in the case of water of finite depth, several boundary-value problems involving the propagation and scattering of time harmonic surface water waves by vertical porous walls have been fully investigated, taking into account the effect of surface tension also. Known results are recovered either directly or as particular cases of the general problems under consideration.

Discussion of “Generalized estimating equations: Notes on the choice of the working correlation matrix”

Objective To discuss generalized estimating equations as an extension of generalized linear models by commenting on the paper of Ziegler and Vens "Generalized Estimating Equations. Notes on the Choice of the Working Correlation Matrix". Methods Inviting an international group of experts to comment on this paper. Results Several perspectives have been taken by the discussants. Econometricians have established parallels to the generalized method of moments (GMM). Statisticians discussed model assumptions and the aspect of missing data Applied statisticians; commented on practical aspects in data analysis. Conclusions In general, careful modeling correlation is encouraged when considering estimation efficiency and other implications, and a comparison of choosing instruments in GMM and generalized estimating equations, (GEE) would be worthwhile. Some theoretical drawbacks of GEE need to be further addressed and require careful analysis of data This particularly applies to the situation when data are missing at random.