Airline distribution

Distribution - Factors affecting distribution strategy • Airlines drive to reduce costs - Distribution has been around 20% of operating costs • Airlines wishing to have more direct contact with their clients • Technology has provided the possibility of a direct channel between the airline and its customers • Disintermediation - as airlines doubt the ability of agents to influence customers’ choice • GDSs fees • Large corporates are more professional in the way they purchase travel products

Are rare species rare or just overlooked? Assessing the distribution of the freshwater bryozoan, Lophopus crystallinus

Given the widespread degradation of freshwater habitats, assessing the distributions of species that may be negatively or positively impacted should be of general interest. However, determining distributions of freshwater organisms that are small and patchily distributed and attached or sedentary is particularly problematic, as it is time consuming, inaccurate, and nearly impossible when the focal species is rare. Here we illustrate the use of indirect sampling approaches to survey the distribution of the rare freshwater bryozoan Lophopus crystallinus, a priority species in the UK Biodiversity Action Plan [Anonymous, 1999. UK Biodiversity Group Tranche 2 Action Plans. Invertebrates, Vol. 4. Environment Agency, Peterborough, pp. 437-439.1. By utilising two complementary methods for sampling bryozoan propagules (statoblasts), namely the collection of debris samples and sediment cores, we achieved an efficient and integrative sampling of habitats across spatial and temporal scales. Analysis of 154 debris samples, encompassing 62 rivers and lakes, identified at least 16 new populations while analysis of 26 sediment cores provided evidence of current or very recent (in the last 10-20 years) occurrence in a further six localities. These results represent a more than 10-fold increase in the current recorded distribution of the species in the UK. Logistic regression analysis provided evidence that L. crystallinus is generally found in lowland sites and is tolerant of eutrophication. Our study exemplifies how integrative and indirect sampling approaches can greatly aid in assessing the conservation status of rare aquatic species and reveals, in this case, that the focal species is less rare than previously appreciated. (c) 2006 Elsevier Ltd. All rights reserved.

Object life cycles & interaction environments for cross media production & distribution

This paper addresses the requirements for a Work/flow Management System that is intended to automate the production and distribution chain for cross-media content which is by nature multi-partner and multi-site. It advocates the requirements for an ontology-based object lifecycle tracking within work/flow integration by identifying various types of interfaces, object life cycles and the work-flow interaction environments within the AXMEDIS Framework.

Workflow data exchange semantics, object discovery & integration architecture for cross media production & distribution

There has been a clear lack of common data exchange semantics for inter-organisational workflow management systems where the research has mainly focused on technical issues rather than language constructs. This paper presents the neutral data exchanges semantics required for the workflow integration within the AXAEDIS framework and presents the mechanism for object discovery from the object repository where little or no knowledge about the object is available. The paper also presents workflow independent integration architecture with the AXAEDIS Framework.

Safety and quality and stage of distribution

Let 0 denote the level of quality inherent in a food product that is delivered to some terminal market. In this paper, I characterize allocations over 0 and provide an economic rationale for regulating safety and quality standards in the food system. Zusman and Bockstael investigate the theoretical foundations for imposing standards and stress the importance of providing a tractable conceptual foundation. Despite a wealth of contributions that are mainly empirical (for reviews of these works see, respectively, Caswell and Antle), there have been relatively few attempts to model formally the linkages between farm and food markets when food quality and consumer safety are at issue. Here, I attempt to provide such a framework, building on key contributions in the theoretical literature and linking them in a simple model of quality determination in a vertically related marketing channel. The food-marketing model is due to Gardner. Spence provides a foundation for Pareto-improving intervention in a deterministic model of quality provision, and Leland, building on the classic paper by Akerlof, investigates licensing and minimum standards when the information structure is incomplete. Linking these ideas in a satisfactory model of the food markets is the main objective of the paper.

Earth hummocks in north-east Okstindan, northern Norway: morphology, distribution and environmental constraints

Earth hummocks (also termed pounus or thúfur) are a common form of periglacial non-sorted patterned ground. The study objectives were to determine the morphology, distribution and development on slopes of earth hummocks in north-east Okstindan, Norway, an area with many hummocks but few documented accounts. The methodology involved detailed geomorphological mapping and precise measurement with a profileometer. The internal structure of the hummocks was investigated through excavations and sediment sample analyses. Fourteen sites with well-developed earth hummocks (accounting for over 650 individual hummock forms) were investigated. The sites have an average altitude of 750 m and occur on slopes with an average gradient of 7°. The hummock heights are in the range 0.11–0.52 m and their diameters 0.7–1.5 m, although coalescent forms are up to 5 m in length. The hummock morphology is characterised by a variable plan form, asymmetry with respect to upslope and downslope forms, downslope elongation, coalescence, and superimposed microtopography. The hummocks’ distribution appeared to have been controlled by the existence of a frost-susceptible ‘host’ sediment, but moisture availability and topographic position played a role. The authors conclude that differential frost heave and vegetation cover stability are critical for the hummocks’ longevity in the studied landscape.

Epsilon Birnbaum-Saunders distribution family: properties and inference

In this paper we introduce a new extension for the Birnbaum-Saunder distribution based on the family of the epsilon-skew-symmetric distributions studied in Arellano-Valle et al. (J Stat Plan Inference 128(2):427-443, 2005). The extension allows generating Birnbaun-Saunders type distributions able to deal with extreme or outlying observations (Dupuis and Mills, IEEE Trans Reliab 47:88-95, 1998). Basic properties such as moments and Fisher information matrix are also studied. Results of a real data application are reported illustrating good fitting properties of the proposed model.

Module property verification : A method to plan and perform quality verifications in modular architectures

Modular product architectures have generated numerous benefits for companies in terms of cost, lead-time and quality. The defined interfaces and the module’s properties decrease the effort to develop new product variants, and provide an opportunity to perform parallel tasks in design, manufacturing and assembly. The background of this thesis is that companies perform verifications (tests, inspections and controls) of products late, when most of the parts have been assembled. This extends the lead-time to delivery and ruins benefits from a modular product architecture; specifically when the verifications are extensive and the frequency of detected defects is high. Due to the number of product variants obtained from the modular product architecture, verifications must handle a wide range of equipment, instructions and goal values to ensure that high quality products can be delivered. As a result, the total benefits from a modular product architecture are difficult to achieve. This thesis describes a method for planning and performing verifications within a modular product architecture. The method supports companies by utilizing the defined modules for verifications already at module level, so called MPV (Module Property Verification). With MPV, defects are detected at an earlier point, compared to verification of a complete product, and the number of verifications is decreased. The MPV method is built up of three phases. In Phase A, candidate modules are evaluated on the basis of costs and lead-time of the verifications and the repair of defects. An MPV-index is obtained which quantifies the module and indicates if the module should be verified at product level or by MPV. In Phase B, the interface interaction between the modules is evaluated, as well as the distribution of properties among the modules. The purpose is to evaluate the extent to which supplementary verifications at product level is needed. Phase C supports a selection of the final verification strategy. The cost and lead-time for the supplementary verifications are considered together with the results from Phase A and B. The MPV method is based on a set of qualitative and quantitative measures and tools which provide an overview and support the achievement of cost and time efficient company specific verifications. A practical application in industry shows how the MPV method can be used, and the subsequent benefits

The Brazilian 1994 stabilization plan: an analytical view

The Real Plan has succeeded in stabilizing the Brazilian inflation. The consumer price inflation has been reduced from 11260 percent per year, in June 1994, to an estimate of 8 percent in 1997. The lower inflation resulted in a remarkable income distribution, and in an increased private consumption. The plan managed to control the inflationary effects of the increased demand with some traditional measures: A more liberalized economy, a moving (and overvalued) exchange rate band, high interest rate differentials, and a tight domestic credit policy. The government has, so far failed to accomplish the fiscal adjustment. The price stabilization has largely depended on the current account deficit. However, macroeconomic indicators do not present reasons for concern about the current account sustainability, in the medium-run. The economy may be trapped in a low-growth vicious cycle, represented by a stop-and-go trend, due to the two-way endogencity between domestic saving and growth. Economic growth depends on policies in increase the public sector saving, to secure the privatization of the State enterprises, and to promote investments. The major problem for the government action is, as always, in the political sphere. Approximately 80 percent of the Central Government net revenue are allocated to the social sectors. Consequently, the fiscal reform will hue to deal with the problem of re-designing the public sector’s intervention in the social area. Most probably, it will be inevitable to cut the social area budget. This is politically unpleasant.

Distribution strategies for the base of the pyramid: an exploratory study in Brazil

Access has been one of the main difficulties companies have faced in emerging markets (PRAHALAD, 2005). The capillarity of the market, the existence of small, not professionalized and sometimes informal retailers, the lack of infrastructure and high transportation costs are some of the distribution challenges companies face in poorer regions. The literature concerning the Base of the Pyramid (BoP) is still recent and only after the seminal article by Prahalad and Hart (2002), it evolved into many different management perspectives. However, there is a lack of researches concerning distribution strategies to the BoP. Therefore, the main objective of this research is to identify, in the perception of executives working in the market, the conditions associated to a satisfactory distribution for the BoP market in Brazil and to build a substantive theory that helps to shed light to the understanding of the distribution phenomenon adopted by consumer goods companies to reach the BoP market in Brazil. In order to accomplish the objectives of this thesis, a grounded theory methodology (Glaser; Strauss, 1967; Corbin; Strauss, 2008) was used. This approach helped to identify the channel strategies used by local and global companies in the market. Many techniques for data collection were applied. The most important one was in-depth interviews with 26 executives from 24 different consumer goods companies in Brazil. Among the companies there were small, medium and large enterprises; which were also grouped as manufacturers, distributors and retailers. Furthermore, secondary data were examined to identify business strategies to reach BoP and map global distribution initiatives. A database from a consumer panel was also used to analyze what and where BoP consumers purchase non-durable goods. It was verified that small and traditional retailing is a very strong format in BoP markets and in the Northern/Northeastern regions. Cash & Carry is a format that is growing a lot. On the other hand, hypermarkets are not very used by low income population. The results suggest that three major categories are associated to a satisfactory distribution: (a) willingness, which means the effort, knowledge and enthusiasm a firm has to operate at BoP markets; (b) well-done execution, which is related to designing correctly the marketing channel and operating efficiently in an environment full of obstacles, such as lack of infrastructure, capillarity, lack of safety, regional differences and informality, and (c) relationship, which was perceived to be friendlier and essential at BoP markets, since it is very difficult for manufacturers to reach the entire market alone. It is more likely to have a satisfactory distribution when manufacturers establish strong relationships in the marketing channel. Besides, small retailers have a perception of isolation and expect a higher level of relationship. These major categories explain also the competitive advantage that local companies have in relation to MNCs and large companies. Despite of the limitations of an exploratory study, it is expected that this thesis will contribute to the BoP knowledge as well as to the identification of the peculiarities of distribution in BoP markets.

Search for W ' boson production in the W ' -> t(b)over-bar decay channel

We present a search for the production of a new heavy gauge boson W' that decays to a top quark and a bottom quark. We have analyzed 230 pb(-1) of data collected with the DO detector at the Fermilab Tevatron collider at a center-of-mass energy of 1.96 TeV. No significant excess of events above the standard model expectation is found in any region of the final state invariant mass distribution. We set upper limits on the production cross section of W' bosons times branching ratio to top quarks at the 95% confidence level for several different W, boson masses. We exclude masses between 200 and 610 GeV for a W' boson with standard-model-like couplings, between 200 and 630 GeV for a W, boson with right-handed couplings that is allowed to decay to both leptons and quarks, and between 200 and 670 GeV for a W' boson with right-handed couplings that is only allowed to decay to quarks. (c) 2006 Elsevier B.V. All rights reserved.

Measurement of the normalized Z/gamma* -> mu(+)mu(-) transverse momentum distribution in p(p)over-bar collisions at root s=1.96 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for the Standard Model Higgs Boson in the Decay Channel H -> ZZ -> 4l in pp Collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for resonances in the dilepton mass distribution in pp collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)