978 resultados para distilled water
Resumo:
The objective of this study was to evaluate the larvicidal activity of diterpenoids obtained from the oil-resin of Copaifera reticulata against Aedes aegypti larvae, the principal vector of dengue and urban yellow fever. Four diterpenes were obtained from oil-resin extraction with organic solvents and subsequent chromatographic and spectroscopic procedures allowed to isolation and identification of these compounds as 3-b-acetoxylabdan-8(17)-13-dien-15-oic acid (1), alepterolic acid (2), 3-b-hidroxylabdan-8(17)-en-15-oic acid (3), and ent-agatic acid (4). Each compound was previously dissolved in dimethylsulphoxide, and distilled water was added to obtain the desired concentrations. Twenty larvae of third instars were placed into plastic beckers, containing the solution test (25 mL), in a five repetitions scheme, and their mortality, indicated by torpor and darkening of the cephalic capsule, was recorded after 48h. Probit analyses were used to determine lethal concentrations (LC50 and LC90) and their respective 95% confidence intervals. This study showed that only diterpenoids 1 and 2 exhibited larvicidal properties with LC50 of 0.8 ppm and 87.3 ppm, respectively, revealing the former as the most toxic compound against third instars of Ae. aegypti. Therefore, this compound seems to be an interesting source for new metabolite to be exploited.
Resumo:
It is known that the fibrous structure of muscle causes light scattering. This phenomenon occurs due to the refractive index discontinuities located between muscle fibers and interstitial fluid. To study the possibility of reducing light scattering inside muscle, we consider its spectral transmittance evolution during an immersion treatment with an optical clearing solution containing ethanol, glycerol, and distilled water. Our methodology consists of registering spectral transmittance of muscle samples while immersed in that solution. With the spectral data collected, we represent the transmittance evolution for some wavelengths during the treatment applied. Additionally, we study the variations that the treatment has caused on the samples regarding tissue refractive index and mass. By analyzing microscopic photographs of tissue cross section, we can also verify changes in the internal arrangement of muscle fibers caused by the immersion treatment. Due to a mathematical model that we develop, we can explain the variations observed in the studied parameters and estimate the amount of optical clearing agent that has diffused into the tissue samples during the immersion treatment. At the end of the study, we observe and explain the improvement in tissue spectral transmittance, which is approximately 65% after 20 min.
Resumo:
The purpose of this study was to evaluate the influence of variables in a flotation technique for the recovery of Toxocara canis eggs from soil. The trials were done under standardized conditions on one gram of previously sterilized soil samples contaminated with 200 eggs of T. canis. The following variables were evaluated in serial steps: sieving; type of wash; time of stirring; resuspension of sediment; solution flotation. Centrifuge-flotation in sodium nitrate (d = 1.20 g/cm³) was adopted as an initial technique, using Tween 80 (0.2%) and decinormal sodium hydroxide as solutions for washing the samples. Ten tests were done to compare the variables, using counting in triplicate. The sieving of the material reduced significantly the recovery of eggs (p < 0.001) and the number of eggs recovered was higher when the sediment was resuspended (p < 0.05). After standardization, flotation solutions sodium chloride, zinc sulfate, sodium dichromate, magnesium sulfate, and sodium nitrate (d = 1.20g/cm³) were compared. The best results were obtained by using zinc sulfate solution. In conclusion, the chances of recovering T. canis eggs from samples using flotation solutions can be increased by washing of soil twice using distilled water, and resuspension of sediment. On the other hand, the sieving procedure can drastically reduce the number of eggs.
Resumo:
The World Health Organization (WHO) has shown concern about the burden of tuberculosis in the developing countries. Even though rifampicin is an effective drug in the management of tuberculosis, it has been documented to have some toxic effects in humans. Therefore, this study intends to investigate the modulatory effect of vitamins C and E on the hepatotoxicity, sperm quality and brain toxicity of Rifampicin. Forty Wistar albino rats were used, 10 animals per group. Group 1 animals received 0.3 mL of distilled water, the Group 2 animals received the therapeutic dose of rifampicin, Group 3 animals received therapeutic doses of rifampicin plus vitamin E, while Group 4 received therapeutic doses of rifampicin and vitamin C. The administration was performed orally during three months; the animals were sacrificed by cervical dislocation at the end of that period. Blood samples were collected and liver function and lipid profile was analyzed using fully automated clinical chemistry device. The liver, brain and reproductive organs underwent histopathological examination. Sperm samples were collected from the epididymis to achieve count and motility and morphological analysis. Results showed rifampicin alone to raise (p < 0.05) liver function enzymes (Aspartate amino transferase [AST], Serum alanine amino transferase [ALT] and Total Bilirubin) when compared with controls. While the vitamin E treated group showed remarkable protection, the vitamin C treated group showed questionable protection against the rifampicin induced liver damage. Sperm count results showed an important (p < 0.05) increase in the sperm quality in vitamin E and C treated groups. However, the vitamin E plus Rifampicin treated group showed increased lipid peroxidation. The histopathological findings revealed structural damages by rifampicin in liver, brain and epididymis while some remarkable architectural integrity was observed in the antioxidant-treated groups. It can be concluded that vitamin E or C improved sperm quality and protected against the brain damage caused by rifampicin. Moreover, vitamin E demonstrated remarkable hepatoprotection against rifampicin induced damage while vitamin C shows a questionable hepatoprotection.
Resumo:
The production of anti-snake venom from large mammal's blood has been found to be low-yielding and arduous, consequently, antivenom immunoglobulins for treatment are achieved regularly as polyvalent serum. We have standardized an undemanding technique for making purified immunoglobulin IgY antivenom consisting of polyclonal antibodies against coral snake venom in the egg yolk of immunized hens. We have adapted a reported process of antibody purification from egg yolks, and achieved 90% antibody purity. The customized technique consisted of the removal of lipids from distilled water-diluted egg yolks by a freeze–thaw sequence. The specific immunoglobulins were present in the egg yolk for up to 180 days postimmunization. Therefore, by means of small venom quantities, a significant amount of immunoglobulins were found in an adequately purified state (The obtained material contained about 90% pure IgY). The antigen binding of the immunoglobulins was detected by a double immunodiffusion test. Titers of antibodies in the yolk were estimated with a serum protection assay (Median effective dose = ED50) (ED50= 477 mg/kg). Given that breeding hens is economically feasible, egg gathering is noninvasive and the purification of IgY antibodies is quick and easy, chicken immunization is an excellent alternative for the production of polyclonal antibodies. To the best of our knowledge, this is the first coral snake antivenom prepared in birds.
Resumo:
The objective of this study was to identify ant occurrence in hospital environments in the State of Santa Catarina, along with associated bacteria. Ants were collected monthly from five inpatient clinics in two hospitals in the municipality of Chapecó, from August 2003 to June 2004. They were collected under aseptic conditions using swabs moistened with sterile distilled water and put into test tubes containing BHI for microbiological analysis. After 24 hours, cultures were made in both 5% sheep blood and MacConkey agar, which were incubated for 24 hours at 35/37°C. The Gram characterization, culture identification and biochemical characterization followed standardized rules for clinical microbiology. Seven species of ants were identified, of which the most frequent were Monomorium pharaonis (71.5%) and Solenopsis saevissima (57%), and nineteen species of bacteria was isolated from hospital "A".
Resumo:
Phosphorus (P) is becoming a scarce element due to the decreasing availability of primary sources. Therefore, recover P from secondary sources, e.g. waste streams, have become extremely important. Sewage sludge ash (SSA) is a reliable secondary source of P. The use of SSAs as a direct fertilizer has very restricted legislation due to the presence of inorganic contaminants. Furthermore, the P present in SSAs is not in a plant-available form. The electrodialytic (ED) process is one of the methods under development to recover P and simultaneously remove heavy metals. The present work aimed to optimize the P recovery through a 2 compartment electrodialytic cell. The research was divided in three independent phases. In the first phase, ED experiments were carried out for two SSAs from different seasons, varying the duration of the ED process (2, 4, 6 and 9 days). During the ED treatment the SSA was suspended in distilled water in the anolyte, which was separated from the catholyte by a cation exchange membrane. From both ashes 90% of P was successfully extracted after 6 days of treatment. Regarding the heavy metals removal, one of the SSAs had a better removal than the other. Therefore, it was possible to conclude that SSAs from different seasons can be submitted to ED process under the same parameters. In the second phase, the two SSAs were exposed to humidity and air prior to ED, in order to carbonate them. Although this procedure was not successful, ED experiments were carried out varying the duration of the treatment (2 and 6 days) and the period of air exposure that SSAs were submitted to (7, 14 and 30 days). After 6 days of treatment and 30 days of air exposure, 90% of phosphorus was successfully extracted from both ashes. No differences were identified between carbonated and non-carbonated SSAs. Thus, SSAs that were exposed to the air and humidity, e.g. SSAs stored for 30 days in an open deposit, can be treated under the same parameters as the SSAs directly collected from the incineration process. In the third phase, ED experiments were carried out during 6 days varying the stirring time (0, 1, 2 and 4 h/day) in order to investigate if energy can be saved on the stirring process. After 6 days of treatment and 4 h/day stirring, 80% and 90% of P was successfully extracted from SSA-A and SSA-B, respectively. This value is very similar to the one obtained for 6 days of treatment stirring 24 h/day.
Resumo:
The purpose of this study is to evaluate in vitro the color stability of composite resins when exposed to beverages with high coloring contents from the Amazon region. 240 samples from four different composite brands (Natural Look, Z350, 4Seasons and Opallis) of hue A3 were fabricated using an acrylic matrix. The samples were stored in distilled water at 37ºC for 24 hours. The initial color (T0) was registered using a Canon EOS Rebel XTi 10 mp camera, and then the samples were divided into four groups (n=15): G1 (coffee), G2 (açaí juice), G3 (energetic guaraná) and G4 (control - distilled water). The samples were exposed to solutions of DES (6hs) and RE (18hs) and placed in a double boiler under constant agitation, at 37ºC for 30 days. The samples were immersed in the coloring solutions for 15 minutes daily. After 7, 15 and 30 days, new photographic registers were made (T1, T2 and T3). The images were analyzed using Corel PHOTO-PAINT 12 software to identify the colors through the HSB system. The Kruskal-Wallis and t tests (p<0.05) demonstrated significant differences in color (hue, saturation and brightness). The results revealed that none of the tested composites showed color stability when exposed to coloring solutions, and that the Amazon region beverages (açaí juice and energetic guaraná) showed to be less coloring than coffee.
Resumo:
Stand alone solar powered refrigeration and water desalination, two of the most popular and sought after applications of solar energy systems, have been selected as the topic of research for the works presented in this thesis. The water desalination system based on evaporation and condensation was found to be the most suitable one to be powered by solar energy. It has been established that highoutput fast-response solar heat collectors used to achieve high rates of evaporation and reliable solar powered cooling system for faster rates of condensation are the most important factors in achieving increased outputs in solar powered desalination systems. Comprehensive reviews of Solar powered cooling/refrigeration and also water desalination techniques have been presented. In view of the fact that the Institute of Technology, Sligo has a well-established long history of research and development in the production of state of the art high-efficiency fast-response evacuated solar heat collectors it was decided to use this know how in the work described in this thesis. For this reason achieving high rates of evaporation was not a problem. It was, therefore, the question of the solar powered refrigeration that was envisaged to be used in the solar powered desalination tofacilitate rapid condensation of the evaporated water that had to be addressed first. The principles of various solar powered refrigeration techniques have also been reviewed. The first step in work on solar powered refrigeration was to successfully modify a conventional refrigerator working on Platen-Munters design to be powered by highoutput fast-response evacuated solar heat collectors. In this work, which was the first ever successful attempt in the field, temperatures as low as —19°C were achieved in the icebox. A new approach in the use of photovoltaic technology to power a conventional domestic refrigerator was also attempted. This was done by modifying a conventional domestic refrigerator to be powered by photovoltaic panels in the most efficient way. In the system developed and successfully tested in this approach, the power demand has been reduced phenomenally and it is possible to achieve 48 hours of cooling power with exposure to just 7 hours of sunshine. The successful development of the first ever multi-cycle intermittent solar powered icemaker is without doubt the most exciting breakthrough in the work described in this thesis. Output of 74.3kg of ice per module with total exposure area of 2.88 m2, or 25.73kg per m2, per day is a major improvement in comparison to about 5-6kg of ice per m2 per day reported for all the single cycle intermittent systems. This system has then become the basis for the development of a new solar powered refrigeration system with even higher output, named the “composite” system described in this thesis. Another major breakthrough associated with the works described in this thesis is the successful development and testing of the high-output water desalination system. This system that uses a combination of the high-output fast-response evacuated solar heat collectors and the multi-cycle icemaker. The system is capable of producing a maximum of 141 litres of distilled water per day per module which has an exposure area of 3.24m2, or a production rate of 43.5 litres per m2 per day. Once again when this result is compared to the reported daily output of 5 litres of desalinated water per m per day the significance of this piece of work becomes apparent. In the presentation of many of the components and systems described in this thesis CAD parametric solid modelling has been used instead of photographs to illustrate them more clearly. The multi-cycle icemaker and the high-output desalination systems are the subject of two patent applications.
Resumo:
This paper describes the data obtained for the growth of sugar cane, Variety Co 419, and the amount and rate of absorption of nitrogen, phosphorus, potassium, calcium, magnesium, sulfur, and silicon, according to the age of the plant, in the soil and climate conditions of the state of S. Paulo, Brazil. An experiment was installed in the Estação Experimental de Cana de Açúcar "Dr. José Vizioli", at Piracicaba, state of S. Paulo, Brazil, and the soil "tèrra-roxa misturada" presented the following composition: Sand (more than 0,2 mm)........................................................................ 8.40 % Fine sand (from 0,2 to less than 0,02 mm)................................................. 24.90 % Silt (from 0,02 to less than 0,002 mm)...................................................... 16.40 % Clay (form 0,002 mm and less)................................................................ 50.20 % pH 10 g of soil and 25 ml of distilled water)..................................................... 5.20 %C (g of carbon per 100 g of soil)................................................................. 1.00 %N (g of nitrogen per 100 g of soil)............................................................... 0.15 P0(4)-³ (me. per 100 g of soil, soluble in 0,05 normal H2SO4) ............................... 0.06 K+ (exchangeable, me. per 100 g of soil)....... 0.18 Ca+² (exchangeable, me. per 100 g of soil)...... 2.00 Mg+² (exchangeable, me. per 100 g of soil)...... 0.66 The monthly rainfall and mean temperature from January 1956 to August 1957 are presented in Table 1, in Portuguese. The experiment consisted of 3 replications of the treatments: without fertilizer and with fertilizer (40 Kg of N, from ammonium sulfate; 100 Kg of P(2)0(5) from superphosphate and 40 Kg K2 O, from potassium chloride). Four complete stools (stalks and leaves) were harvested from each treatment, and the plants separated in stalks and leaves, weighed, dried and analysed every month from 6 up to 15 months of age. The data obtained for fresh and dry matter production are presented in table 2, and in figure land 2, in Portuguese. The curves for fresh and dry matter production showed that fertilized and no fertilized sugar cane with 6 months of age presents only 5% of its total weight at 15 months of age. The most intense period of growth in this experiment is located, between 8 and 12 months of age, that is between December 1956 and April 1957. The dry matter production of sugar cane with 8 and 12 months of age was, respectively, 12,5% and 87,5% of the total weight at 15 months of age. The growth of sugar cane in relation to its age follows a sigmoid curve, according to the figures 1, 2 and 3. The increase of dry matter production promoted by using fertilizer was 62,5% when sugar cane was 15 months of age. The concentration of the elements (tables 4 and 5 in Portuguese) present a general trend of decreasing as the cane grows older. In the stalks this is true for all elements studied in this experiment. But in the leaves, somme elements, like sulfur and silicon, appears to increase with the increasing of age. Others, like calcium and magnesium do not show large variations, and finally a third group, formed by nitrogen, phosphorus and potassium seems to decrease at the beginning and later presents a light increasing. The concentration of the elements was higher in the leaves than in the stalks from 6 up to 15 months of age. There were some exceptions. Potassium, magnesium and sulfur were higher in the stalks than in the leaves from 6 up to 8 or 9 months of age. After 9 months, the leaves presented more potassium, magnesium and sulfur than the stalks. The percentage of nitrogen in the leaves was lower in the plants that received fertilizer than in the plants without fertilizer with 6, 7, 8, 10, 11 and 13 months of age. This can be explained by "dilution effect". The uptake of elements by 4 stools (stalks and leaves) of sugar cane according to the plant age is showed in table 6, in Portuguese. The absorption of all studied elements, nitrogen, phosphorus, potassium, calcium, magnesium, sulfur and silicon, was higher in plants that received fertilizer. The trend of uptake of nitrogen and potassium is similar to the trend of production of dry matter, that is, the maximum absorption of those two nutrients occurs between 9 and 13 months of age. Finaly, the maxima amounts of elements absorbed by 4 stools (stalks and leaves) of sugar cane plants that received fertilizer are condensed in the following table: Element Maximum absorption in grams Age of the plants in months Nitrogen (N) 81.0 14 Phosphorus (P) 6.8 15 Potassium (K) 81.5 15 Calcium (Ca) 19.2 15 Magnesium (Mg) 13.9 13 Sulfur (S) 9.3 15 Silicon (Si) 61.8 15 It is very interesting to note the low absorption of phosphorus even with 100 kg of P2O5 per hectare, aplied as superphosphate. The uptake of phosphorus was lower than calcium, magnesium and sulfur. Also, it is noteworthy the large amount of silicon absorbed by sugar cane.
Resumo:
The writer reports experiments done with distilled water and hypotonic and hypertonic salt solutions of definite osmotic concentrations. The experiments were performed according to the Laewen-Trendelenburg technic using the vascular system of the frog's hind legs, and according to the Pissemski-Krawkow method using the capillaries of the rabbit's ear. Both preparations react to distilled water by marked vaso-constriction, the same phenomenon taking place in the case of the hypotonic salt solutions. The lower the concentration pf the hypotonic salt solution the stronger the vaso-constriction obtained. With hypertonic salt solutions was observed a strong but rather transient vaso-dilatation followed by secondary vaso-constriction. The later results were found only in the experiments with the frog's hind legs.
Resumo:
I) the A. presents a method developed for the preparation of thick blood films, specially old desiccated smears. The observations are based on the experience of more than 53000 blood samples collected in the laboratory of the Serviço de Malaria do Nordeste as well as in the research department of the Serviço de Malaria da Baixada Fluminenese. II) As in introductory matter, he emphasizes the value of the obstacles presented by overdrying of the thick blood films occurring systematically in great malaria control organizations in which the laboratory receives materials from more or less remote localities, particularly in the Brazilian northeast, in regions invaded by Anopheles gambiae. III) An analysis of the causes of failure of the methods of Chorine and Knowles recorded in the literature for such purposes is given, as well as its adaptability for the simultaneous preparation of large numbers of samples. IV) The method is based the protective action of a previous fixation by a dilute solution of formalin, which, without preventing further dehemoglobinization, prevents morphological alterations in the parasites by the action of Knowles solution which is retained in this metod without modification. V) For washing out the acids of the dehemoglobinizating solution as well as for diluting the Giemsa stain, the A. proposes a very simple technique, extremely convenient for such purpose, which consists in adding acetic acid to the distilled water in the proportion of 1 drop for each 10cc of water, and then increasing the hydrogeni-on concentration to pH 7.2 with a 2% sol. of sodium carbonate. As indicator a 0.02% solution purple-bromcresol prepared in accordante to Medalia, is used. In this reaction there is the formation of the acetic acid ↔ sodium acetate, buffer system very suitable for giving a convenient pH and for preventing the precipitation of the dye, which can be used for two or three batches of 700 or 800 slides each, without changing the staining solution. VI) The method can be summarized as follow: For a small number of samples, Coplins or any other staining jar can be used. Large number of slides must be placed in groups of 10 or 15 units each, the slides being separated by a piece of cardboard, according to Barber & Komp. A) Fix in dilute formalin (2%), during 5 minutes. b) Without washing, put in Knowles solution (see the formula in the text), no more than 20 minutes. c)Two successive washings in distilled water, buffered as explained above (which can be used several times). d) Dry and stain with Giemsa solution, prepared by using 1 drop of the stain for each c. c. of buffered distilled water. Time: 1 hour. E) Was in distilled water and dry.
Resumo:
This study aimed to evaluate the effects of (g a.i. L-1) abamectin (0.02), carbaryl (1.73), sulphur (4.8), fenitrothion (0.75), methidathion (0.4), and trichlorfon (1.5) on the survival of larvae and pupae, on the oviposition of adults and hatching of eggs from treated Chrysoperla externa third-instar larvae from two different populations (Bento Gonçalves and Vacaria, Rio Grande do Sul State, Brazil). Morphological changes caused by abamectin to eggs laid by C. externa from Vacaria population were evaluated by mean of ultrastructural analysis. The pesticides were applied on glass plates. Distilled water was used as control. For the evaluation of larvae mortality, a fully randomized experimental design in a 2 x 7 (two populations x seven treatments) factorial scheme was used, whereas for the effects of the compounds on oviposition capacity and egg viability, a 2 x 4 factorial scheme was used. Carbaryl, fenitrothion, and methidathion caused 100% mortality of larvae. Abamectin reduced the hatching of eggs from treated third-instar larvae of both populations; however, this pesticide presented highest toxicity on insects from Vacaria. The ultrastructural analysis showed that abamectin caused malformations in micropyle and in chorion external surface of C. externa eggs. Based in the total effect (E), carbaryl, fenitrothion, and methidathion are harmful to C. externa; trichlorfon is harmless to third-instar larvae, while abamectin and sulphur are harmless and slightly harmful to third-instar larvae from Bento Gonçalves and Vacaria, respectively.
Resumo:
The objective of this study was to extract and concentrate calcium oxalate (CaOx) crystals from plant leaves that form the above mentioned crystals. The chemical and physical studies of CaOx from plant to be performed depend on an adequate amount of the crystals. The plant used in this study was croton (Codiaeum variegatum). The leaves were ground in a heavy duty blender and sieved through a 0.20 mm sieve. The suspension obtained was suspended in distilled water. The crystals were concentrated at the bottom of a test tube. The supernatant must be washed until it is free of plant pigments and other organic substances. Biogenic CaOx crystals have well-defined and sharp peaks, indicating very high crystallinity. Moreover, the CaOx crystals were not damaged during the extraction procedure, as can be seen on the scanning electron microscope images. The porposed method can be considered efficient to extract and concentrate biogenic calcium oxalate.
Resumo:
Water-soluble polymers are characterized as effective flocculating agents due to their molecular features. Their application to soils with horizons with structural problems, e.g, a cohesive character, contributes to improvements in the physical quality and thus to the agricultural suitability of such soils. The purpose of this study was to evaluate the structural quality of soils with cohesive horizons of coastal tablelands in the State of Pernambuco treated with polyacrylamide (PAM) as chemical soil conditioner. To this end, three horizons (one cohesive and two non-cohesive) of a Yellow Argisol (Ultisol) were evaluated and to compare cohesive horizons, the horizon of a Yellow Latosol (Oxisol) was selected. The treatments consisted of aqueous PAM solutions (12.5; 50.0; 100.0 mg kg-1) and distilled water (control). The structural aspects of the horizons were evaluated by the stability (soil mass retained in five diameter classes), aggregate distribution per size class (mean weight diameter- MWD, geometric mean diameter - GMD) and the magnitude of the changes introduced by PAM by measuring the sensitivity index (Si). Aqueous PAM solutions increased aggregate stability in the largest evaluated diameter class of the cohesive and non-cohesive horizons, resulting in higher MWD and GMD, with highest efficiency of the 100 mg kg-1 solution. The cohesive horizon Bt1 in the Ultisol was most sensitive to the action of PAM, where highest Si values were found, but the structural quality of the BA horizon of the Oxisol was better in terms of stability and aggregate size distribution.