Valorization of agro-industrial wastes towards the production of rhamnolipids

In this work, oil mill wastewater (OMW), a residue generated during olive oil extraction, was evaluated as an inducer of rhamnolipid production. Using a medium containing as sole ingredients corn steep liquor (10%, v/v), sugarcane molasses (10%, w/v) and OMW (25%, v/v), Pseudomonas aeruginosa #112 produced 4.5 and 5.1 g of rhamnolipid per liter in flasks and reactor, respectively, with critical micelle concentrations as low as 13 mg/l. Furthermore, in the medium supplemented with OMW, a higher proportion of more hydrophobic rhamnolipid congeners was observed comparing with the same medium without OMW. OMW is a hazardous waste which disposal represents a serious environmental problem; therefore, its valorization as a substrate for the production of added-value compounds such as rhamnolipids is of great interest. This is the first report of rhamnolipid production using a mixture of these three agro-industrial by-products, which can be useful for the sustainable production of rhamnolipids.

Bacterial cellulose-lactoferrin as an antimicrobial edible packaging

Bacterial cellulose (BC) films from two distinct sources (obtained by static culture with Gluconacetobacter xylinus ATCC 53582 (BC1) and from a commercial source (BC2)) were modified by bovine lactoferrin (bLF) adsorption. The functionalized films (BC+bLF) were assessed as edible antimicrobial packaging, for use in direct contact with highly perishable foods, specifically fresh sausage as a model of meat products. BC+bLF films and sausage casings were characterized regarding their water vapour permeability (WVP), mechanical properties, and bactericidal efficiency against two food pathogens, Escherichia coli and Staphylococcus aureus. Considering their edibility, an in vitro gastrointestinal tract model was used to study the changes occurring in the BC films during passage through the gastrointestinal tract. Moreover, the cytotoxicity of the BC films against 3T3 mouse embryo fibroblasts was evaluated. BC1 and BC2 showed equivalent density, WVP and maximum tensile strength. The percentage of bactericidal efficiency of BC1 and BC2 with adsorbed bLF (BC1+bLF and BC2+bLF, respectively) in the standalone films and in inoculated fresh sausages, was similar against E. coli (mean reduction 69 % in the films per se versus 94 % in the sausages) and S. aureus (mean reduction 97 % in the films per se versus 36 % in the case sausages). Moreover, the BC1+bLF and BC2+bLF films significantly hindered the specific growth rate of both bacteria. Finally, no relevant cytotoxicity against 3T3 fibroblasts was found for the films before and after the simulated digestion. BC films with adsorbed bLF may constitute an approach in the development of bio-based edible antimicrobial packaging systems.

Exploitation of Ashbya gossypii for the production of high-value products from glycerol feedstocks

Dissertação de mestrado em Bioengenharia

Development of a life cycle management system for remote products.

The research described in this thesis has been developed as a part of the Reliability and Field Data Management for Multi-Component Products (REFIDAM) Project. This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway-Mayo Institute of Technology and an industrial company, Thermo King Europe. The project aimed to develop a system to manage the information required for maintenance costing, cost of ownership, reliability assessment and improvement of multi-component products, by establishing information flows between the customer network and across the Thermo King organisation.

Casolà o industrial?: estudi organolèptic i microbiològic de la vida útil del pernil cuit

Treball de recerca realitzat per un alumne d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l'any 2009. Aquest treball tracta sobre el temps de garantia o de vida útil d’un producte alimentari i està basat en esbrinar quin és el millor mètode o envàs per conservar el pernil cuit llescat durant la seva vida útil, per tal que es mantinguin les propietats organolèptiques i microbiològiques inicials de l’aliment durant el màxim de temps possible. Per comparar envasos he utilitzat els industrials (envàs al buit i envàs en atmosfera) i els envasos que podem trobar quan comprem un producte llescat en el mostrador d’una botiga o supermercat. Per a fer l’estudi doncs s’ha utilitzat el pernil cuit, conegut com a pernil dolç, un dels productes més consumits per la societat actual. El pernil ha estat tractat en tres situacions diferents: llescat en una màquina de carnisseria i envasat en mètodes de conservació domèstics, llescat en màquines industrials i envasat en diferents envasos (al buit i en atmosfera modificada) utilitzats per les grans empreses i llescat en màquines industrials i envasat al buit sotmès a un tractament amb altes pressions. Després d’aquests processos s’ha realitzat un estudi de vida útil, és a dir, s’ha analitzat el producte al laboratori, amb l’objectiu de trobar quin és el millor envàs per a la conservació del pernil cuit.

Environmental Tax on Products and Services Based on Their Carbon Footprint: A Case Study of the Pulp and Paper Sector

The main aim of this work is to define an environmental tax on products and services based on their carbon footprint. We examine the relevance of conventional life cycle analysis (LCA) and environmentally extended input-output analysis (EIO) as methodological tools to identify emission intensities of products and services on which the tax is based. The short-term price effects of the tax and the policy implications of considering non-GHG are also analyzed. The results from the specific case study on pulp production show that the environmental tax rate based on the LCA approach (1,8%) is higher than both EIO approaches (0,8% for product and 1,4% for industry approach), but they are comparable. Even though LCA is more product specific and provides detailed analysis, EIO would be the more relevant approach to apply economy wide environmental tax. When the environmental tax considers non-GHG emissions instead of only CO2, sectors such as agriculture, mining of coal and extraction of peat, and food exhibit higher environmental tax and price effects. Therefore, it is worthwhile for policy makers to pay attention on the implication of considering only CO2 tax or GHG emissions tax in order for such a policy measure to be effective and meaningful. Keywords: Environmental tax; Life cycle analysis; Environmental input-output analysis.

Projecte constructiu d’una nau industrial

Definició d’una nau industrial per a magatzem frigorífic mitjançant lamemòria tècnica, els plànols i els càlculs ubicada al terme municipal de Begur (Baix Empordà)

Financial Markets and Real Ecinomy: Four Essays in International Trade

Financial markets play an important role in an economy performing various functions like mobilizing and pooling savings, producing information about investment opportunities, screening and monitoring investments, implementation of corporate governance, diversification and management of risk. These functions influence saving rates, investment decisions, technological innovation and, therefore, have important implications for welfare. In my PhD dissertation I examine the interplay of financial and product markets by looking at different channels through which financial markets may influence an economy.My dissertation consists of four chapters. The first chapter is a co-authored work with Martin Strieborny, a PhD student from the University of Lausanne. The second chapter is a co-authored work with Melise Jaud, a PhD student from the Paris School of Economics. The third chapter is co-authored with both Melise Jaud and Martin Strieborny. The last chapter of my PhD dissertation is a single author paper.Chapter 1 of my PhD thesis analyzes the effect of financial development on growth of contract intensive industries. These industries intensively use intermediate inputs that neither can be sold on organized exchange, nor are reference-priced (Levchenko, 2007; Nunn, 2007). A typical example of a contract intensive industry would be an industry where an upstream supplier has to make investments in order to customize a product for needs of a downstream buyer. After the investment is made and the product is adjusted, the buyer may refuse to meet a commitment and trigger ex post renegotiation. Since the product is customized to the buyer's needs, the supplier cannot sell the product to a different buyer at the original price. This is referred in the literature as the holdup problem. As a consequence, the individually rational suppliers will underinvest into relationship-specific assets, hurting the downstream firms with negative consequences for aggregate growth. The standard way to mitigate the hold up problem is to write a binding contract and to rely on the legal enforcement by the state. However, even the most effective contract enforcement might fail to protect the supplier in tough times when the buyer lacks a reliable source of external financing. This suggests the potential role of financial intermediaries, banks in particular, in mitigating the incomplete contract problem. First, financial products like letters of credit and letters of guarantee can substantially decrease a risk and transaction costs of parties. Second, a bank loan can serve as a signal about a buyer's true financial situation, an upstream firm will be more willing undertake relationship-specific investment knowing that the business partner is creditworthy and will abstain from myopic behavior (Fama, 1985; von Thadden, 1995). Therefore, a well-developed financial (especially banking) system should disproportionately benefit contract intensive industries.The empirical test confirms this hypothesis. Indeed, contract intensive industries seem to grow faster in countries with a well developed financial system. Furthermore, this effect comes from a more developed banking sector rather than from a deeper stock market. These results are reaffirmed examining the effect of US bank deregulation on the growth of contract intensive industries in different states. Beyond an overall pro-growth effect, the bank deregulation seems to disproportionately benefit the industries requiring relationship-specific investments from their suppliers.Chapter 2 of my PhD focuses on the role of the financial sector in promoting exports of developing countries. In particular, it investigates how credit constraints affect the ability of firms operating in agri-food sectors of developing countries to keep exporting to foreign markets.Trade in high-value agri-food products from developing countries has expanded enormously over the last two decades offering opportunities for development. However, trade in agri-food is governed by a growing array of standards. Sanitary and Phytosanitary standards (SPS) and technical regulations impose additional sunk, fixed and operating costs along the firms' export life. Such costs may be detrimental to firms' survival, "pricing out" producers that cannot comply. The existence of these costs suggests a potential role of credit constraints in shaping the duration of trade relationships on foreign markets. A well-developed financial system provides the funds to exporters necessary to adjust production processes in order to meet quality and quantity requirements in foreign markets and to maintain long-standing trade relationships. The products with higher needs for financing should benefit the most from a well functioning financial system. This differential effect calls for a difference-in-difference approach initially proposed by Rajan and Zingales (1998). As a proxy for demand for financing of agri-food products, the sanitary risk index developed by Jaud et al. (2009) is used. The empirical literature on standards and norms show high costs of compliance, both variable and fixed, for high-value food products (Garcia-Martinez and Poole, 2004; Maskus et al., 2005). The sanitary risk index reflects the propensity of products to fail health and safety controls on the European Union (EU) market. Given the high costs of compliance, the sanitary risk index captures the demand for external financing to comply with such regulations.The prediction is empirically tested examining the export survival of different agri-food products from firms operating in Ghana, Mali, Malawi, Senegal and Tanzania. The results suggest that agri-food products that require more financing to keep up with food safety regulation of the destination market, indeed sustain longer in foreign market, when they are exported from countries with better developed financial markets.Chapter 3 analyzes the link between financial markets and efficiency of resource allocation in an economy. Producing and exporting products inconsistent with a country's factor endowments constitutes a serious misallocation of funds, which undermines competitiveness of the economy and inhibits its long term growth. In this chapter, inefficient exporting patterns are analyzed through the lens of the agency theories from the corporate finance literature. Managers may pursue projects with negative net present values because their perquisites or even their job might depend on them. Exporting activities are particularly prone to this problem. Business related to foreign markets involves both high levels of additional spending and strong incentives for managers to overinvest. Rational managers might have incentives to push for exports that use country's scarce factors which is suboptimal from a social point of view. Export subsidies might further skew the incentives towards inefficient exporting. Management can divert the export subsidies into investments promoting inefficient exporting.Corporate finance literature stresses the disciplining role of outside debt in counteracting the internal pressures to divert such "free cash flow" into unprofitable investments. Managers can lose both their reputation and the control of "their" firm if the unpaid external debt triggers a bankruptcy procedure. The threat of possible failure to satisfy debt service payments pushes the managers toward an efficient use of available resources (Jensen, 1986; Stulz, 1990; Hart and Moore, 1995). The main sources of debt financing in the most countries are banks. The disciplining role of banks might be especially important in the countries suffering from insufficient judicial quality. Banks, in pursuing their rights, rely on comparatively simple legal interventions that can be implemented even by mediocre courts. In addition to their disciplining role, banks can promote efficient exporting patterns in a more direct way by relaxing credit constraints of producers, through screening, identifying and investing in the most profitable investment projects. Therefore, a well-developed domestic financial system, and particular banking system, would help to push a country's exports towards products congruent with its comparative advantage.This prediction is tested looking at the survival of different product categories exported to US market. Products are identified according to the Euclidian distance between their revealed factor intensity and the country's factor endowments. The results suggest that products suffering from a comparative disadvantage (labour-intensive products from capital-abundant countries) survive less on the competitive US market. This pattern is stronger if the exporting country has a well-developed banking system. Thus, a strong banking sector promotes exports consistent with a country comparative advantage.Chapter 4 of my PhD thesis further examines the role of financial markets in fostering efficient resource allocation in an economy. In particular, the allocative efficiency hypothesis is investigated in the context of equity market liberalization.Many empirical studies document a positive and significant effect of financial liberalization on growth (Levchenko et al. 2009; Quinn and Toyoda 2009; Bekaert et al., 2005). However, the decrease in the cost of capital and the associated growth in investment appears rather modest in comparison to the large GDP growth effect (Bekaert and Harvey, 2005; Henry, 2000, 2003). Therefore, financial liberalization may have a positive impact on growth through its effect on the allocation of funds across firms and sectors.Free access to international capital markets allows the largest and most profitable domestic firms to borrow funds in foreign markets (Rajan and Zingales, 2003). As domestic banks loose some of their best clients, they reoptimize their lending practices seeking new clients among small and younger industrial firms. These firms are likely to be more risky than large and established companies. Screening of customers becomes prevalent as the return to screening rises. Banks, ceteris paribus, tend to focus on firms operating in comparative-advantage sectors because they are better risks. Firms in comparative-disadvantage sectors finding it harder to finance their entry into or survival in export markets either exit or refrain from entering export markets. On aggregate, one should therefore expect to see less entry, more exit, and shorter survival on export markets in those sectors after financial liberalization.The paper investigates the effect of financial liberalization on a country's export pattern by comparing the dynamics of entry and exit of different products in a country export portfolio before and after financial liberalization.The results suggest that products that lie far from the country's comparative advantage set tend to disappear relatively faster from the country's export portfolio following the liberalization of financial markets. In other words, financial liberalization tends to rebalance the composition of a country's export portfolio towards the products that intensively use the economy's abundant factors.

Getting to know about health and safety related to products used in painting, drawing and printmakin

Practicing art is not a high risk activity. This statement, along with the creative, expressive and intangible aims of this activity, as well as the lack of information, promotion of safety awareness and training of thepeople in charge of art studios, may have pushed the implications of practicing art as regards health, safety and environment into the background. Faced with this prospect, a comprehensive study of the facilities and the activities carried out in art studios becomes necessary. The study concerns experimental activities involving Health and Safety risks for both the artists and the teachers and students, especially those carried out in the studios located in educational institutions.

A regional Industrial Symbiosis methodology and its implementation in Geneva, Switzerland

The Agenda 21 for the Geneva region is the results from a broad consultation process including all local actors. The article 12 stipulates that « the State facilitates possible synergies between economic activities in order to minimize their environmental impacts » thus opening the way for Industrial Ecology (IE) and Industrial Symbiosis (IS). An Advisory Board for Industrial Ecology and Industrial Symbiosis implementation was established in 2002 involving relevant government agencies. Regulatory and technical conditions for IS are studied in the Swiss context. Results reveal that the Swiss law on waste does not hinder by-product exchanges. Methodology and technical factors including geographic, qualitative, quantitative and economical aspects are detailed. The competition with waste operators in a highly developed recycling system is also tackled.The IS project develops an empirical and systematic method for detecting and implementing by-products synergies between industrial actors disseminated throughout the Geneva region. Database management tool for the treatment of input-output analysis data and GIS tools for detecting potentials industrial partners are constantly improved. Potential symbioses for 17 flows (including energy, water and material flows) are currently studied for implementation.

Managing Configurable Products in Mass Customization

Massaräätälöinti on tärkeä osa nykyaikaista tuotestrategiaa. Massaräätälöinti mahdollistaa asiakaskohtaisesti muokattujen tuotteiden valmistuksen massatuotannon tehokkuudella. Massaräätälöinti edellyttää laajamittaista tietojärjestelmien hyväksikäyttöä, niin räätälöityjen tuotteiden mallinnuksessa, tuotteistuksessa kuin ylläpidossakin. Diplomityössä käsittelen taustatekijöitä jotka ovat johtaneet massaräätälöinnin syntyyn ja yleistymiseen. Käsittelyssä ovat myös erilaiset tavat toteuttaa massaräätälöintiä ja tietojärjestelmät jota tukevat massaräätälöintiä. Diplomityön empiirisessä osassa tarkastellaan Nokia Networksin tapaa toteuttaa massaräätälöintiä sekä esitellään tärkeimmät tätä tukevat järjestelmät. Empiirisen osan painopiste on kuitenkin hyvin vahvasti keskittynyt yhteen tuoterakenteiden osaan, joka on aiheuttanut haasteita Nokia Networksin massaräätälöintikonseptille. Tämä tuoterakenteen osa on valjastettu moneen erilaiseen käyttöön, mikä aiheuttaa ongelmia tietojärjestelmissä ja prosesseissa joihin se on vaikuttamassa. Työn tarkoituksena on kartoittaa kaikki ne ongelmat joita tämä tuoterakenteen osa aiheuttaa sulavalle massaräätälöinnin toteuttamiselle, niin yleisesti kuin järjestelmä- ja prosessimielessäkin. Työ on tehty osana laajamittaista projektia. Projektin tarkoituksena on kehittää uusi ja joustavampi ratkaisu tuoterakenteisiin, mandollistaen asiakaskohtaisten räätälöityjen tuotteiden valmistamisen, niin että se sopii Nokia Networksin järjestelmä sekä prosessi ympäristöön.

Lifecycle Information Management of a Mass Customized Product

Diplomityön tavoitteena on tutkia mitä uusia tiedonhallinnallisia ongelmia ilmenee, kun massaräätälöidyn tuotteen tuotetieto hallitaan läpi tuotteen elinkaaren, sekä miten nämä ongelmat voitaisiin ratkaista. Ongelmat ja haasteet kerätään kirjallisuuslähteistä ja massaräätälöintiprosessi yhdistetään PLM-vaiheisiin. Ratkaisua tutkitaan testaamalla kuinka standardit STEP ja PLCS sekä standardeja tukeva PLM järjestelmä voisivat tukea massaräätälöidyn tuotteen elinkaaren tiedonhallintaa. MC tuotteiden ongelmia ovat tuoterakenteen monimutkaisuus, jäljitettävyys ja muutosten hallinta läpi elinkaaren. STEP ja PLCS pystyvät kummatkin tahollaan tukemaan tiedonhallintaa. MC-tuotteen geneerinen tuoterakenne on kuitenkin manuaalisesti liittettävä elinkaaritiedon tukemiseen. PLM-järjestelmä pystyy tukemaan MC-tuotteiden elinkaarta, mutta koska toiminto ei ole järjestelmään sisäänrakennettuna, MC-tuotteiden tukemisen parantamisessa on edelleen haasteita.

Product Launch in Industrial Markets – Financial Risks in New AMD Elevator Door Launch

Tuotekehitys ja uusien tuotteiden lanseeraus on teollisen yrityksen menestyksekkään liiketoiminnan elinehtoja tämän päivän kilpailussa. Teollisuusyrityksen tuotteiden innovaatioaikakausia on ollut lukuisia, samoin kuin uuden tuotteen lanseerauksen lähtökohtia. Aikakausista, jolloin tuotteita kehitettiin yrityksen omista lähtökohdista, kuten valmistuksellisista eduista, on edetty tilanteeseen, jossa markkinoiden tarpeita tulee ottaa yhä enemmän huomioon. Kuitenkin, teollisuudessa esitellään tuotteita yhä puhtaasti tuotantolähtöisesti, ja tutkimuksen tavoitteena on selvittää taloudellisia riskejä, joita liittyy puhtaasti teknologiavetoiseen tuotteiden kehitystyöhön, valmistukseen ja lanseeraukseen. Normatiivisena tutkimuksena työ pyrkii asiakastarpeita ja teollisuusyrityksen loppuasiakkaiden näkökulmia huomioon ottaen osoittamaan markkinoinnin keinojen merkityksen tuotantolähtöisen tuotelanseerauksen taloudellisten riskien minimoimiseksi. Uuden teollisen tuotteen asiakastarpeita on selvitetty kyselymuotoisen markkinointitutkimuksen menetelmiä hyväksikäyttäen. Tuotteen tärkeimpien ominaisuuksien, kuten turvallisuuden, kestävyyden ja hinnan merkitystä voidaan hyödyntää ennen tuotteen kaupallista esittelyä potentiaalisten asiakassegmenttien kartoitukseen ja menestyksellisen lanseerauksen edesauttamiseksi.