Palynostratigraphy of Ordovician strata, Canning Basin, Western Australia. Part Two: chitinozoans and biostratigraphy

This second and concluding part of a comprehensive palynological study of the Lower to Middle Ordovician succession of the central-northeastern Canning Basin completes the systematic documentation of the palynomorphs, i.e., chitinozoans, and formulates a palynostratigraphic zonation scheme embracing all three constituent formations of this investigation, viz., the Willara, Goldwyer, and Nita formations. A total of 21 species of chitinozoans (five genera), detailed systematically herein, are identified. Although chitinozoan recovery per sample proved variable, the following species occur fairly persistently in the productive samples: Belonechitina micracantha, Conochitina subcylindrica, C. poumoti, C. langei, Calpichitina windjana, and Rhabdochitina magna. Five, stratigraphically successive acritarch/prasinophyte assemblage zones, ranging in age from early Arenig through late Llanvirn, are proposed as follows (ascending order): Athabascaella rossii Assemblage Zone (corresponding to the lower Willara Formation; and dated as early-mid Arenig); Comasphaeridium setaricum Assemblage Zone (upper Willara and lowermost Goldwyer; late Arenig-earliest Llanvirn); Sacculidium aduncum Assemblage Zone (lower Goldwyer; early Llanvirn); Aremorica-nium solaris Assemblage Zone (middle and lower upper Goldwyer; mid Llanvirn); and Dactylofusa striatogranulata Assemblage Zone (upper Goldwyer and lower Nita; late Llanvirn). Four chitinozoan assemblage zones, stratigraphically coinciding (within the limits of sampling) with the acritarch/prasinophyte zones, comprise (in ascending order): Lagenochitina combazi Assemblage Zone (equivalent to the A. rossii and L. heterorhabda Assemblage Zones); Conochitina langei Assemblage Zone; Conocbitina subcylindrica Assemblage Zone; and Belonecbitina micracantha Assemblage Zone. Chronostratigraphic assignments are based principally on associated conodont and graptolite faunas. Whereas the acritarch/prasinophyte zones bear scant similarities to those established globally elsewhere, the chitinozoan zones show significant affiliations with those known from Laurentia.

Reincidência Criminal sob o Enfoque dos Processos Psicossociais

Este estudo teve como objetivo pesquisar a reincidência criminal por meio de três estudos exploratórios. No primeiro foi utilizado o Perfil do Detento no Estado de São Paulo, ano de 2003, documento elaborado pela Secretaria da Administração Penitenciaria, selecionando-se dele a população de 1.280 sujeitos do gênero masculino do Presídio Desembargador "Adriano Marrey" de Guarulhos. Foram encontradas prováveis associações à reincidência criminal nos seguintes fatores: idade, número de delitos cometidos e escolaridade. No segundo utilizou-se um levantamento aleatório, através do número de matrícula dos presos, que atingiu 11% dos 1.654 registrados e classificados em 2004. Os dados dos prontuários criminológicos dessa população carcerária, que foi de 182 sujeitos, foram comparados aos do primeiro estudo. Os resultados corroboraram tendências de associação entre idade, escolaridade, números de delitos e reincidência criminal. No terceiro estudo foram analisados 30 protocolos do Teste do Desenho da Figura Humana (DFH) aplicados em sentenciados do gênero masculino que tinham entre 18 e 35 anos de idade, condenados pelo artigo 157§2° do Código Penal Brasileiro (Assalto a Mão Armada), em regime inicialmente fechado. Esta investigação teve como objetivo conhecer as características de personalidade das pessoas que cometeram crimes. Encontraram-se alguns traços de personalidade que podem estar associados à criminalidade ou a reincidência.Não foram detectadas características psicóticas, mas perturbações e desvios na sexualidade, agressividade, imaturidade, dificuldade de elaboração de frustrações. Estes resultados podem alicerçar o uso das técnicas projetivas nas entrevistas de inclusão. Para tanto se propõe o uso do Desenho da Figura Humana de Machover (1949), com análise proposta por Lourenção Van Kolck (1984). Na discussão dos resultados e nas conclusão foram retomados os fatores que se apresentaram associados à reincidência e alguns temas que se mostraram de interesse para outras pesquisas no campo da psicologia criminal ou penitenciária. Pretendeu-se buscar subsídios que pudessem contribuir para a prevenção da reincidência, com base numa compreensão psicossocial do comportamento criminoso e sempre sob o enfoque da psicologia da saúde. As pessoas envolvidas na execução da pena deverão dar mais ênfase à entrevista de inclusão para cumprir o que determina a Lei de Execução Penal, executando o exame de classificação

A cross-national investigation into the marketing department's influence within the firm:toward initial empirical generalizations

An ongoing strong debate within the marketing discipline concerns the role of marketing within the firm. It has been frequently reported that the marketing function is in a deep decline. Marketing executives and academics alike are interested in the antecedents of this decline and potential performance consequences of this decline. Recent academic research have started investigations on this important topic. Using studies in single countries innovativeness and accountability of the marketing department has been reported as major antecedents of the influence of the marketing department within the organization. Academic research, however, does not provide convincing evidence for a direct link between this influence and business performance. Instead it shows that market orientation is a crucial intervening variable, as marketing department influence is positively related market orientation, which subsequently positively related to business performance. As noted prior research, however, studies firms in single countries. In this article we execute a cross-national study on the antecedents and performance consequences of marketing department influence in order to derive initial empirical generalizations. This study is executed in seven Western-oriented countries, including USA, UK, The Netherlands, Germany, Sweden, Israel and Australia. The study heavily builds on the framework developed in the 2009 Journal of Marketing article of Verhoef and Leeflang. This framework is tested per country and subsequently meta-analytic tests are used to derive initial empirical generalizations. An important empirical generalization is that innovativeness, the customer-connecting capabilities, and accountability of the marketing department are positively related to marketing department influence. Interestingly, a second initial generalization is that creativity of the marketing negative induces less influence. Our results also show a third empirical generalization in that firms having a CEO with a marketing background tend to have more influential marketing departments. Confirming prior research a fourth initial empirical generalization is that MD influence measures and market orientation are positively related. Market orientation is subsequently positively related to business performance. Our most important generalization is, however, that MD influence is positively related to business performance. Hence, beyond striving to become market oriented, firms should also aim to have strong marketing departments. These departments can create a stronger focus on the customer and can also coordinate marketing efforts. In order to become more influential marketing departments should: (1) acquire innovative capabilities, (2) be more connected to customers, (3) invest in accountability, and (4) be careful with be careful being too creative.

A cross-national investigation into the marketing department's influence within the firm

Both marketing academics and practitioners are debating the diminished role of marketing as a separate function within firms. In this study, which expands on previous research on Dutch companies, the authors focus on how the marketing department’s capabilities relate to business performance across countries. The authors collected data in seven Western countries—the Netherlands, Germany, Sweden, United Kingdom, United States, Australia, and Israel. They surveyed top marketing and financial executives, CEOs, and other top employees of profit-based middle-sized and large firms. Their findings show that accountability provides the most consistent predictor of influence, whereas the marketing department’s innovativeness and customer connection show less consistent results. Across the seven countries, the department’s integration with the finance department has a consistent but negative effect on the department’s perceived influence. The influences of marketing departments clearly differ across countries. Perceived influence is substantially higher in the United States and Israel than in other countries, whereas top management respect for the marketing department is substantially higher in Israel than in any other country. The study also found that the marketing department is well represented on the boards of companies in Sweden, Israel, and the United States. In most countries, marketing tends not to be organized as a line function. Some differences among countries emerge in the relationships between the marketing department’s influence and business performance. In Israel, the United States, the United Kingdom, Germany, and Australia, influence relates positively to business performance, whereas in the Netherlands, it has no influence. The results for Sweden suggest a negative influence. The authors conclude that a strong marketing department appears to benefit firms in most of the countries studied. The results imply that the marketing department should have input into boardroom considerations.

Practitioners are from Mars; academics are from Venus? An investigation of the research-practice gap in management accounting

Purpose: The aim of this paper is to identify and gain insights into the significance of barriers contributing to the purported "gap" between academic management accounting research and practice. Design/methodology/approach: Drawing on diffusion of innovations theory, this study collects and analyses data from a questionnaire survey and follow-up interviews with 19 representatives of the four principal professional accounting bodies in Australia. Findings: Professional accounting bodies perceive the gap between academic research and practice in management accounting to be of limited concern to practitioners. The two most significant barriers to research utilisation by practitioners are identified as: difficulties in understanding academic research papers; and limited access to research findings. In acting as a conduit between the worlds of academia and practice, professional bodies have an important role to play by demonstrating the mutual value to both academics and practitioners resulting from a closer engagement between MA research and practice. Research limitations/implications: As one of the few empirically-based, theoretically informed investigations exploring the research-practice gap in management accounting, this study provides insights rather than "answers". Its findings therefore serve as a foundational basis for further empirical and theoretical enquiry. Originality/value: This study contributes to the conversation about the "research-practice gap" in management accounting by adopting a distinct theoretical vantage point to organize, analyse and interpret empirical evidence obtained from Australian professional accounting bodies about management accounting practice. © Emerald Group Publishing Limited.

Strategies for sustaining manufacturing competitiveness:comparative case studies in Australia and Sweden

Purpose - The purpose of this paper is to report an investigation of local sustainable production in Australia and Sweden aimed at exploring the factors contributing to survival and competitiveness of manufacturing companies. Design/methodology/approach - In Australia, six companies were studied in 2010, with comparisons being made with three of them from earlier projects. In Sweden, eight manufacturing companies were studied on two occasions 30 years apart, in 1980 and 2010. To provide a valid comparative perspective a common format for data collection and analysis was used. Findings - There has been a shift in the nature of competition in both Sweden and Australia due to an increasing complexity of the global business environment as well as changes in technology and customer expectations. Despite the differences in country context, the findings suggest that all the manufacturing companies have a good awareness of the elements of the market environment and the relationships with their competitive strategy. However, in general, the Swedish companies have more experience of managing the risks and benefits from operating in the international environment. Research limitations/implications - The results of the research are based on a relatively small sample of case companies in a limited number of industrial sectors. There are methodology implications for future research in the area. Practical implications - The research results have practical implications for the manufacturing industry, especially for companies operating in a competitive international environment. Originality/value - The paper is based on original case research and comparative analysis of data from different geographical contexts. It contributes to both theory and management practice about the strategic resources, decision choices, competitive environments and firm values needed to address external market demands as well as in building internal capabilities.

Geological investigation of a section at Kulyumbe river in Siberia

An integrated, high-resolution chemostratigraphic (C, O and Sr isotopes) and magnetostratigraphic study through the upper Middle Cambrian - lowermost Ordovician shallow-marine carbonates of the northwestern margin of the Siberian Platform is reported. The interval was analysed at the Kulyumbe section, which is exposed along the Kulyumbe River: an eastern tributary of the Enisej River. It comprises the upper Ust'-Brus, Labaz, Orakta, Kulyumbe, Ujgur, and lower Iltyk formations and includes the Steptoean positive carbon isotopic excursion (SPICE) studied here in detail from upper Cambrian carbonates of the Siberian Platform for the first time. The peak of the excursion, showing d13C positive values as high as +4.6? and least-altered 87Sr/86Sr ratios of 0.70909, is reported herein from the Yurakhian Horizon of the Kulyumbe Formation. The stratigraphic position of the SPICE excursion does not support traditional correlation of the boundary between the Orakta and Labaz formations at Kulyumbe River with its supposedly equivalent level in Australia, Laurentia, South China, and Kazakhstan, where the Glyptagnostus stolidotus and G. reticulatus biozones are known to immediately precede the SPICE excursion and span the Middle-Upper Cambrian boundary. The Cambrian-Ordovician boundary is probably situated in the middle Nyajan Horizon of the Iltyk Formation, in which carbon isotope values show a local maximum below a decrease in the upper part of the Nyajan Horizon, attributed herein to the Tremadocian. A refined magnetic polarity sequence shows that the geomagnetic reversal frequency was very high during the Middle Cambrian at 5-10 reversals per Ma, assuming a total duration of ~10 Ma and up to 100 magnetic intervals in the Middle Cambrian. By contrast, the sequence attributed herein to the Upper Cambrian on chemostratigraphic grounds contains only 10-11 magnetic intervals. Preprint in Open Access hdl:10013/epic.30209.d001

How much is '5-a-day'? A qualitative investigation into consumer understanding of fruit and vegetable intake guidelines

BACKGROUND: Despite the known health benefits of fruit and vegetables (FV), population intakes remain low. One potential contributing factor may be a lack of understanding surrounding recommended intakes. The present study aimed to explore the understanding of FV intake guidelines among a sample of low FV consumers.

METHODS: Six semi-structured focus groups were held with low FV consumers (n = 28, age range 19-55 years). Focus groups were recorded digitally, transcribed verbatim and analysed thematically using nvivo (QSR International, Melbourne, Australia) to manage the coded data. Participants also completed a short questionnaire assessing knowledge on FV intake guidelines. Descriptive statistics were used to analyse responses.

RESULTS: The discussions highlighted that, although participants were aware of FV intake guidelines, they lacked clarity with regard to the meaning of the '5-a-day' message, including what foods are included in the guideline, as well as what constitutes a portion of FV. There was also a sense of confusion surrounding the concept of achieving variety with regard to FV intake. The sample highlighted a lack of previous education on FV portion sizes and put forward suggestions for improving knowledge, including increased information on food packaging and through health campaigns. Questionnaire findings were generally congruent with the qualitative findings, showing high awareness of the '5-a-day' message but a lack of knowledge surrounding FV portion sizes.

CONCLUSIONS: Future public health campaigns should consider how best to address the gaps in knowledge identified in the present study, and incorporate evaluations that will allow the impact of future initiatives on knowledge, and ultimately behaviour, to be investigated.

An investigation of environmental conditions experienced during the life of high-value wood components and products

Australian forest industries have a long history of export trade of a wide range of products from woodchips (for paper manufacturing), sandalwood (essential oils, carving and incense) to high value musical instruments, flooring and outdoor furniture. For the high value group, fluctuating environmental conditions brought on by changes in temperature and relative humidity, can lead to performance problems due to consequential swelling, shrinkage and/or distortion of the wood elements. A survey determined the types of value-added products exported, including species and dimensions packaging used and export markets. Data loggers were installed with shipments to monitor temperature and relative humidity conditions. These data were converted to timber equilibrium moisture content values to provide an indication of the environment that the wood elements would be acclimatising to. The results of the initial survey indicated that primary high value wood export products included guitars, flooring, decking and outdoor furniture. The destination markets were mainly located in the northern hemisphere, particularly the United States of America, China, Hong Kong, Europe (including the United Kingdom), Japan, Korea and the Middle East. Other regions importing Australian-made wooden articles were south-east Asia, New Zealand and South Africa. Different timber species have differing rates of swelling and shrinkage, so the types of timber were also recorded during the survey. Results from this work determined that the major species were ash-type eucalypts from south-eastern Australia (commonly referred to in the market as Tasmanian oak), jarrah from Western Australia, spotted gum, hoop pine, white cypress, black butt, brush box and Sydney blue gum from Queensland and New South Wales. The environmental conditions data indicated that microclimates in shipping containers can fluctuate extensively during shipping. Conditions at the time of manufacturing were usually between 10 and 12% equilibrium moisture content, however conditions during shipping could range from 5 (very dry) to 20% (very humid). The packaging systems incorporated were reported to be efficient at protecting the wooden articles from damage during transit. The research highlighted the potential risk for wood components to ‘move’ in response to periods of drier or more humid conditions than those at the time of manufacturing, and the importance of engineering a packaging system that can account for the environmental conditions experienced in shipping containers. Examples of potential dimensional changes in wooden components were calculated based on published unit shrinkage data for key species and the climatic data returned from the logging equipment. The information highlighted the importance of good design to account for possible timber movement during shipping. A timber movement calculator was developed to allow designers to input component species, dimensions, site of manufacture and destination, to see validate their product design.

Investigation into various fungicides and alternative solutions for controlling postharvest diseases in papaya fruit

In Australia, Sportak® (a.i., prochloraz) has been registered since the early 1980's for the postharvest control of both anthracnose and stem-end rots in papaya fruit, despite the persistence of fruit breakdown due to disease during transit and at market destinations. Consequently, the Australian papaya industry has been concerned over the efficacy of prochloraz and whether substitute or alternative solutions were available for better disease control, particularly during times of peak disease pressure. This study therefore investigated the effects of various postharvest treatments for disease control in papaya. Fruit were harvested at colour break from coastal farms in Far North Queensland and treated with commercial rates of various fungicides, including prochloraz, imazalil, thiabendazole and fludioxonil. Additional solutions known to inhibit disease were examined, including chitosan and carnauba wax both with and without ammonium carbonate (AC). Following treatment, fruit were ripened and assessed for quality over their shelf life. Fludioxonil when applied as a hot dip was found to be a more efficacious treatment for control of disease in papaya than prochloraz. The other fungicides were moderately effective, as both thiabendazol and prochloraz exhibited an intermediate response and imazalil was the least effective. Disease severity was lowest in fruit treated with AC followed by chitosan, whilst chitosan delayed degreening. Overall, the study found that hot fludioxonil provided an effective replacement of the currently registered chemical prochloraz, and that alternate solutions such chitosan and AC may also be beneficial, particularly for low chemical input farming systems.

A critical and interpretative investigation of the ethical dimension of policies about school digital technologies

This thesis examines digital technologies policies designed for Australian schools and the ways they are understood and interpreted by students, school staff, teachers, principals and policy writers. This study explores the ways these research participant groups interpret and understand the ‘ethical dimension’ of schools’ digital technologies policies for teaching and learning. In this thesis the ethical dimension is considered to be a dynamic concept which encompasses various elements including; decisions, actions, values, issues, debates, education, discourses, and notions of right and wrong, in relation to ethics and uses of digital technologies in schools. In this study policy is taken to mean not only written texts but discursive processes, policy documents including national declarations, strategic plans and ‘acceptable use’ policies to guide the use of digital technologies in schools. The research is situated in the context of changes that have occurred in Australia and internationally over the last decade that have seen a greater focus on the access to and use of digital technologies in schools. In Australian school education, the attention placed on digital technologies in schools has seen the release of policies at the national, state, territory, education office and school levels, to guide their use. Prominent among these policies has been the Digital Education Revolution policy, launched in 2007 and concluded in 2013. This research aims to answers the question: What does an investigation reveal about understandings of the ethical dimension of digital technologies policies and their implementation in school education? The objective of this research is to examine the ethical dimension of digital technologies policies and to interpret and understand the responses of the research participants to the issues, silences, discourses and language, which characterise this dimension. In doing so, it is intended that the research can allow the participants to have a voice that, may be different to the official discourses located in digital technologies policies. The thesis takes a critical and interpretative approach to policies and examines the role of digital technologies policies as discourse. Interpretative theory is utilised as it provides a conceptual lens from which to interpret different perspectives and the implications of these in the construction of meaning in relation to schools’ digital technologies policies. Critical theory is used in tandem with interpretative theory as it represents a conceptual basis from which to critique and question underlying assumptions and discourses that are associated with the ethical dimension of schools’ digital technologies policies. The research methods used are semi-structured interviews and policy document analysis. Policies from the national, state, territory, education office and school level were analysed and contribute to understanding the way the ethical dimension of digital technologies policies is represented as a discourse. Students, school staff, teachers, principals and policy writers participated in research interviews and their views and perspectives were canvassed in relation to the ethical use of digital technologies and the policies that are designed to regulate their use. The thesis presents an argument that the ethical dimension of schools’ digital technologies policies and use is an under-researched area, and there are gaps in understanding and knowledge in the literature which remain to be addressed. It is envisaged that the thesis can make a meaningful contribution to understand the ways in which schools’ digital technologies policies are understood in school contexts. It is also envisaged that the findings from the research can inform policy development by analysing the voices and views of those in schools. The findings of the policy analysis revealed that there is little attention given to the ethical dimension in digital technologies at the national level. A discourse of compliance and control pervades digital technologies policies from the state, education office and school levels, which reduces ethical considerations to technical, legal and regulatory requirements. The discourse is largely instrumentalist and neglects the educative dimension of digital technologies which has the capacity to engender their ethical use. The findings from the interview conversations revealed that students, school staff and teachers perceive digital technologies policies to be difficult to understand, and not relevant to their situation and needs. They also expressed a desire to have greater consultation and participation in the formation and enactment of digital technologies policies, and they believe they are marginalised from these processes in their schools. Arising from the analysis of the policies and interview conversations, an argument is presented that in the light of the prominent role played by digital technologies and their potential for enhancing all aspects of school education, more research is required to provide a more holistic and richer understanding of the policies that are constructed to control and mediate their use.