The Mirror Room Project: A Critical Ethnographic Program Evaluation of a Teaching Personal and Social Responsibility Based Youth Development Program

Amongst a host of other benefits, proper physical education has the possibility to create a safe place where responsibility can be transferred from the teacher/facilitator, to the student. This is especially true with an underserved population. This critical program evaluation of the program CHARM was done for the purpose of program improvement. This research was a place for participants to share their experiences of the program. The participants were 5 underserved youth, 5 undergraduate students, 3 teachers and 1 graduate student. Observations, interviews, and document analysis were used to gather data. Data was analyzed using a first level read-through, and two second-level analyses. Summaries were written, and cross-case analyses were completed. The main finding of the research was the development of a Handbook, which is a guide to running the program. Secondary findings include issues of program structure, goal setting, meaningful relationships, roles, SNAP, and an outlier in the data.

Connecticut Mirror, 4 January 1813 (vol. 4, no. 27) - Newspaper

Volumes of interest were published between 1812 and 1815 with articles about the War of 1812. Issue for Jan. 4, 1813 includes (on p. 3) the annual carrier's address to the readers of the newspaper, this one having a war theme since it was published in the midst of the War of 1812. It is titled: "War and Proclamations--Addressed to the Readers of the Connecticut Mirror". Includes war-related content with some items headed: "Generosity of American Tars", "Impressment of Seamen" which is signed in type: James Monroe, "Reward Of Merit", "From Niagara" and a few other items.

The Impact of Directed Mirror Focus and Technique Cues on Psychological, Cognitive and Emotional Exercise Correlates in an Introductory Weight Training Orientation

The purpose of the study was to investigate whether teaching inactive and low active women to use mirrors for form and technique purposes could lessen the negative impact of mirrors on self-presentational concerns, affect, and self-efficacy. Eligible women (N = 82) underwent a one-on-one weight training orientation with a personal trainer. Participants were randomized into one of four experimental groups, each unique in the type of feedback (general or technique-specific) and the degree of focus on the mirror for technique reinforcement. Questionnaires assessed study outcomes pre- and post-orientation. Results indicated groups did not significantly differ on any post-condition variables, when controlling for pre-condition values (all p’s >.05). All groups showed outcome improvements following the orientation. This suggests that during a complex task, a personal trainer who emphasizes form and technique can facilitate improvements to psychological outcomes in novice exercisers, independent of the presence of mirrors or directional cues provided.

Looking at The Future of Canadian Copyright in The Rear View Mirror

"L’auteur présente une analyse générale de l’évolution historique et des développements récents du régime des droits d’auteur au Canada. Avec le développement des nouvelles technologies de l’information, et plus spécifiquement de l’Internet, le régime canadien des droits d’auteur nécessiterait d’importantes réformes. L’auteur déplore toutefois les modifications récentes issues de la loi C-60. En effet, selon lui, ces changements ne correspondent pas au régime international proposé par l’Organisation Mondiale de Propriété Intellectuelle. En fait, ceux-ci cadrent beaucoup plus avec la perspective américaine de protection limitative des droits d’auteur. Michael Geist trace d’abord l’historique du développement du régime de protection des droits d’auteur au Canada. Il souligne notamment les modifications législatives importantes de la fin des années 1980 et 1990 qui visaient à renforcer les règles de reconnaissance et de protection des droits que les auteurs canadiens possèdent sur leurs œuvres. Parallèlement, à ces modifications législatives, la Cour Suprême du Canada s’est aussi prononcée sur la question des droits d’auteur en interprétant limitativement la portée de ce régime, facilitant ainsi l’accès des œuvres artistiques au domaine public. L’auteur souligne les divergences et les contradictions entre la conception législative et celle jurisprudentielle de la fonction du régime canadien des droits d’auteur. Le législateur canadien a récemment proposé une nouvelle modification du régime de droits d’auteurs qui consisterait en l’extension des délais obligatoire avant qu’une œuvre couverte par le régime ne soit incluse dans le domaine public. Michael Geist s’oppose à une telle modification et soutient qu’elle entraînerait de nombreuses conséquences négatives pour les auteurs et les artistes canadiens. En effet, cette modification limiterait l’accès des auteurs aux oeuvres antérieures, elle entraverait les opportunités et les capacités commerciales des œuvres canadiennes et restreindrait les domaines de recherche académique. L’auteur aborde par la suite la problématique reliée aux ""Mesures de Protection Techniques"" et à la législation qui les encadre. En analysant les problèmes causés par ces mesures aux États-Unis, il présente leurs effets nuisibles pour les domaines fondamentaux de la liberté de parole et de la recherche académique. Les réformes possibles du régime canadien des droits d’auteur se situent dans une perspective plus ouverte du régime de protection et de promotion des œuvres canadiennes. Ces réformes auraient l’avantage de promouvoir et de protéger les œuvres canadiennes tout en évitant les problèmes causés par les mesures trop limitatives. À ce sujet, l’auteur propose l’établissement d’une bibliothèque digitale nationale, l’abrogation des droits d’auteur de la couronne et un nouveau régime permettant l’utilisation du matériel radiodiffusé de la Société Radio-Canada."

Backscattering Reduction of Corner Reflectors using SCS Technique

Reduction of radar cross -section of dihedral corner reflectors using simulated corrugated surface (.SCS) is reported. This technique is found lo be more effective in the reduction of RCS or corner reflectors for normal incidence . A typical reduction of 40-50 dB is achieved using this method

Backscattering Reduction of Corner Reflectors using SCS Technique

Reduction of radar cross -section of dihedral corner reflectors using simulated corrugated surface (SCS) is reported. The technique is found to be more effective in the reduction of RCS or corner reflectors for normal incidence . A typical reduction of 40-50 dB is achieved using this method.

Radar cross-section enhancement of dihedral corner reflector using fractal-based metallo-dielectric structures

Effective use of fractal-based metallo-dielectric structures for enhancing the radar cross-section (RCS) of dihedral corner reflectors is reported. RCS enhancement of about 30 dBsm is obtained for corner reflectors with corner angles other than 90deg. This may find application in remote sensing and synthetic aperture radar.

A new corner reflector antenna with periodic strip subreflectors

This paper presents the design of a new type of corner reflector (CR) antenna and the experimental investigation of its radiation characteristics. The design involves the addition of planar parallel periodic strips to the two sides of a CR antenna. The position, angular orientation, and number of strips have a notable effect on the H-plane radiation characteristics of the antenna. Certain configurations of the new antenna are capable of producing very sharp axial beams with gain on the order of 5 dB over the square corner reflector antenna. A configuration that can provide symmetric twin beams with enhanced gain and reduced half-power beam width (HPBW) is also presented.

Beam shaping of sectoral electromagnetic horn antennas using corner reflector technique

In the present thesis, possibility of beam shaping of sectoral horns and corner reflector systems'has been studied in detail. The experimental results obtained in the above two cases are compared. As far as the flanged sectoral horns are concerned, the special advantage is that the gain is increased without impairing impedance conditions. An intense study on corner reflector antennas shows that the been broadening or focussing will be possible by adjusting parameters involved. Beam tilting by imposing asymmetries is another interesting property of the systems. A comprehensive study of these fields has been presented in Chapter II. Chapter III is exclusively for describing the experimental techniques used in the present investigation. In Chapter IV, experimental results on flanged sectoral horns and corner reflector eyetses are presented. A comparative analysis of the experimental results obtained with flanged sectoral horns and corner reflector systems is presented in the Chapter V. The similarity and close resemblance in each aspects are shown by presenting typical results from these two eysteee. Theoretical aspects of both types of antennas are considered in Chapter VI. Attempts are made for co-ordinating the theoretical aspects and drawing a final conclusion. In Chapter VII. the final conclusion that the flanged sectoral horn may be considered as a corner reflector system has been drawn. The importance of the conclusions and usefulness are pointed out. The scope for further work in these lines has been indicated.

Investigations on the radiation characteristics of flanged sectoral horn antennas and corner reflector systems

Antennas play an important role in determining the characteristics of any electronic system which depends on free space as the propagation medium. Basically, an antenna can be considered as the connecting link between free space and the transmitter or receiver. For radar and navigational purposes the directional properties of an antenna is its most basic requirement as it determines the distribution of radiated energy. Hence the study of directional properties of antennas has got special significance and several useful applications.

Generalization over contrast and mirror reversal, but not figure-ground reversal, in an "edge-based

Baylis & Driver (Nature Neuroscience, 2001) have recently presented data on the response of neurons in macaque inferotemporal cortex (IT) to various stimulus transformations. They report that neurons can generalize over contrast and mirror reversal, but not over figure-ground reversal. This finding is taken to demonstrate that ``the selectivity of IT neurons is not determined simply by the distinctive contours in a display, contrary to simple edge-based models of shape recognition'', citing our recently presented model of object recognition in cortex (Riesenhuber & Poggio, Nature Neuroscience, 1999). In this memo, I show that the main effects of the experiment can be obtained by performing the appropriate simulations in our simple feedforward model. This suggests for IT cell tuning that the possible contributions of explicit edge assignment processes postulated in (Baylis & Driver, 2001) might be smaller than expected.

Corner Flows in Free Liquid Films

A lubrication-flow model for a free film in a corner is presented. The model, written in the hyperbolic coordinate system ξ = x² – y², η = 2xy, applies to films that are thin in the η direction. The lubrication approximation yields two coupled evolution equations for the film thickness and the velocity field which, to lowest order, describes plug flow in the hyperbolic coordinates. A free film in a corner evolving under surface tension and gravity is investigated. The rate of thinning of a free film is compared to that of a film evolving over a solid substrate. Viscous shear and normal stresses are both captured in the model and are computed for the entire flow domain. It is shown that normal stress dominates over shear stress in the far field, while shear stress dominates close to the corner.

Using page and section breaks, mirror margins and headers & footers in a thesis in MS Word 2011 (Mac) Manual

The University's thesis regulations give very specific guidance about margin's and page layout. This manual explains how to use set up margins to work with double sided printing; how to ensure chapters start on the right-hand page; and how to create running headers and footers in a thesis written in MS Word 2011.

Using page and section breaks, mirror margins and headers & footers in a thesis in MS Word 2010 (PC) Manual

The University's thesis regulations give very specific guidance about margin's and page layout. This manual explains how to use set up margins to work with double sided printing; how to ensure chapters start on the right-hand page; and how to create running headers and footers in a thesis written in MS Word 2010.