Efeito da adição de flúor e cálcio no gel clareador a base de peróxido de hidrogênio na penetração, cor e microdureza

The objective of this study was to evaluate the effect of adding calcium ions and fluoride in the formulation of a whitening gel 35% hydrogen peroxide in its penetration through the dental structure, whitening efficacy and surface hardness of dental enamel. 80 teeth bovine incisors were used, which were obtained enamel and dentin disks of the buccal surface with 6mm diameter and 2mm thick (1 mm of enamel and dentin 1mm). The samples were divided into four groups stratified according to the protective substance / remineralizing added to the gel of hydrogen peroxide 35%: Group Ca - Calcium gluconate 0.5%; Group F - Sodium fluoride 0.2%; Group Ca + F - Calcium gluconate 0.5% and Sodium Fluoride 0.2%; Control group - no substance was added. The initial color of the samples and the hardness of the enamel were measured before the bleaching procedures. The specimens from each group were placed on a metallic support on which there was a simulated pulp chamber, which was filled with acetate buffer to collect and stabilize the penetrated peroxide. The respective bleaching treatments were applied 3 times, total of 30 minutes of application. The amount of peroxide which passed through the samples was determined by absorbance spectrophotometry. The hardness of the samples was measured immediately after bleaching. Next, the samples were immersed in artificial saliva for 7 days, after which the final color was evaluated. Data were statistically analyzed adopting a 5% significance level

Efeito da adição de flúor e cálcio no gel clareador a base de peróxido de hidrogênio na penetração, cor e microdureza

The objective of this study was to evaluate the effect of adding calcium ions and fluoride in the formulation of a whitening gel 35% hydrogen peroxide in its penetration through the dental structure, whitening efficacy and surface hardness of dental enamel. 80 teeth bovine incisors were used, which were obtained enamel and dentin disks of the buccal surface with 6mm diameter and 2mm thick (1 mm of enamel and dentin 1mm). The samples were divided into four groups stratified according to the protective substance / remineralizing added to the gel of hydrogen peroxide 35%: Group Ca - Calcium gluconate 0.5%; Group F - Sodium fluoride 0.2%; Group Ca + F - Calcium gluconate 0.5% and Sodium Fluoride 0.2%; Control group - no substance was added. The initial color of the samples and the hardness of the enamel were measured before the bleaching procedures. The specimens from each group were placed on a metallic support on which there was a simulated pulp chamber, which was filled with acetate buffer to collect and stabilize the penetrated peroxide. The respective bleaching treatments were applied 3 times, total of 30 minutes of application. The amount of peroxide which passed through the samples was determined by absorbance spectrophotometry. The hardness of the samples was measured immediately after bleaching. Next, the samples were immersed in artificial saliva for 7 days, after which the final color was evaluated. Data were statistically analyzed adopting a 5% significance level

Atividade da catalase e da lactato desidrogenase em tilápias submetidas a estresse de confinamento: efeito da cor do ambiente

Avaliaram-se os efeitos da cor do ambiente sobre o crescimento e a atividade da enzima antioxidante catalase (CAT) e da lactato desidrogenase (LDH) em tilápias do Nilo (n=24; 36,2±3,6g). Oito exemplares foram mortos para determinação da atividade basal das enzimas e os demais permaneceram isolados durante 14 dias sob espectro de luz branca ou azul (n=8 peixes/tratamento). A seguir os peixes foram submetidos a um estresse diário de confinamento de 90 minutos (15° ao 28° dia) e pesados semanalmente para cálculo da taxa de crescimento específico (TCE). A TCE negativa confirmou que o confinamento provocou estresse nos peixes, independentemente da cor do ambiente. O aumento da atividade da LDH no músculo vermelho dos peixes mantidos sob luz branca ou azul indicou mudança do metabolismo aeróbio para anaeróbio. O estresse reduziu a atividade da CAT no músculo branco dos peixes mantidos sob a luz branca ou azul. Na musculatura vermelha, esta redução ocorreu apenas nos animais mantidos sob a luz branca. O confinamento aumenta os processos metabólicos anaeróbios e é adequado para estudos sobre os efeitos do estresse. O espectro de luz azul não evita a redução do crescimento e a demanda energética anaeróbia em situações de estresse, mas preserva a atividade da CAT, contribuindo para o bem-estar da tilápia.

Acciaio COR-TEN esposto in ambiente urbano-costiero: studio del rilascio di metalli di lega

Il Cor-Ten è un acciaio micro-legato, detto anche acciaio patinabile, che garantisce una buona resistenza alla corrosione da agenti atmosferici. Proprio grazie a questa sua peculiare caratteristica sta conoscendo un vasto impiego in particolare nel campo dell’edilizia e delle infrastrutture. La corrosione infatti interessa tutti i settori produttivi e non, provocando ingenti danni economici. Stime effettuate negli ultimi 40anni da diversi enti internazionali indicano che l’entità di questi danni, pur variando da settore a settore, risulta compresa per i paesi industrializzati tra il 3 e il 4% del PIL. Da questi dati si evince la necessità di proteggere i materiali dalla corrosione; in genere per questo scopo si ricorre a trattamenti superficiali o a rivestimenti protettivi. Queste tecniche non rappresentano però l’unica strada, è possibile infatti agire sulla composizione della lega, come nel caso del Cor-Ten, in modo che l’interazione metallo-ambiente porti alla formazione di una patina protettiva di prodotti di corrosione relativamente stabili. La formazione di questo strato, cosiddetto passivante, protegge il metallo da un’ulteriore attacco corrosivo. Scopo di questo lavoro di tesi è studiare il comportamento di questo materiale in ambiente urbano-costiero in tre differenti stati di finitura in cui è commercialmente disponibile: grezzo, pre-patinato e pre-patinato cerato, focalizzando l’attenzione sugli aspetti ambientali legati al suo utilizzo e cercando di valutare in particolare il rilascio dei metalli di lega nell’ambiente, aspetto fino ad ora non considerato in letteratura. I risultati ottenuti indicano che sembrerebbe preferibile l’utilizzo del materiale grezzo rispetto ai pre-patinati, almeno per quanto riguarda il rilascio di metalli in ambiente. Sulla base dei risultati ottenuti è possibile fornire una stima, per i tre stati di finitura di Cor-Ten A considerati, del quantitativo totale (solubile + estraibile) dei metalli rilasciati in ambiente nei sette mesi di esposizione durante la stagione primaverile-estiva della sperimentazione condotta in questo studio. La quantità rilasciata stimata per il Fe oscilla tra i 0,5 g/m2 per i provini light e i 0,7 g/m2 per i provini dark e grezzi, per il Ni il range è compreso tra i 3,6 mg/m2 dei provini grezzi e i 5 mg/m2 per i light, nel caso del Mn il quantitativo varia dai 6,8 mg/m2 per i light ai 10 mg/m2 per i grezzi. Per il Cr la stima per i provini pre-patinati è simile e si attesta intorno a 1,7 mg/m2, risultando minore (anche se in maniera non rilevate) per i grezzi.

Corrosione atmosferica in area urbana-costiera di un acciaio Cor-Ten: studio del rilascio in ambiente dei metalli di lega

Cor-Ten is a particular kind of steel, belonging to low-alloyed steel; thanks to his aesthetic features and resistance to atmospheric corrosion, this material is largely used in architectural, artistic and infrastructural applications. After environmental exposure, Cor-Ten steel exhibits the characteristic ability to self-protect from corrosion, by the development of a stable and adherent protective layer. However, some environmental factors can influence the formation and stability of the patina. In particular, exposure of Cor-Ten to polluted atmosphere (NOx, SOx, O3) or coastal areas (marine spray) may cause problems to the protective layer and, as a consequence, a release of alloying metals, which can accumulate near the structures. Some of these metals, such as Cr and Ni, could be very dangerous for soils and water because of their large toxicity. The aim of this work was to study the corrosion behavior of Cor-Ten exposed to an urban-coastal site (Rimini, Italy). Three different kinds of commercial surface finish (bare and pre-patinated, with or without a beeswax covering) were examined, both in sheltered and unsheltered exposure conditions. Wet deposition brushing the specimens surface (leaching solutions) are monthly collected and analyzed to evaluate the extent of metal release and the form in which they leave the surface, for example, as water-soluble compounds or non-adherent corrosion products. Five alloying metals (Fe, Cu, Cr, Mn and Ni) and nine ions (Cl-, NO3-, NO2-, SO42-, Na+, Ca2+, K+, Mg2+, NH4+) are determined through Atomic Absorption Spectroscopy and Ion Chromatography, respectively. Furthermore, the evolution and the behaviour of the patina are periodically followed by surface investigations (SEM-EDS and Raman Spectroscopy). After two years of exposure, the results show that Bare Cor-Ten, cheaper than the other analyzed specimens, even though undergoes the greater mass variation, his metal release is comparable to the release of the pre-patinated samples. The behavior of pre-patinated steel, with or without beeswax covering, do not show particular difference. This exposure environment doesn’t allow a completely stabilization of the patina; nevertheless an estimate of metal release after 10 years of exposure points out that the environmental impact of Cor-Ten is very low: for example, the release of chromium in the soluble fraction is less than 10 mg if we consider an exposed wall of 10 m2.

Cor triatriatum sinister.

The cor triatriatum sinister is an uncommon congenital cardiac anomaly and reports in the literature are limited. It is often associated with other cardiac malformations, such as atrial septal defect, transposition of the great arteries, tetralogy of Fallot or atrioventricular septal defect. We present here a 6-year old boy who was diagnosed with cor triatriatum sinister, initially showing symptoms similar to mitral valve stenosis and congestive heart failure, and who underwent subsequent surgical correction using a left atrial approach. The fibromuscular membrane, separating the pulmonary veins from the mitral valve, was completely resected and postoperative echocardiography showed unobstructed pulmonary venous flow.

Effects of short- and long-term variations in RLS severity on perceived health status - the COR-study.

In a cohort study among 2751 members (71.5% females) of the German and Swiss RLS patient organizations changes in restless legs syndrome (RLS) severity over time was assessed and the impact on quality of life, sleep quality and depressive symptoms was analysed. A standard set of scales (RLS severity scale IRLS, SF-36, Pittsburgh Sleep Quality Index and the Centre for Epidemiologic Studies Depression Scale) in mailed questionnaires was repeatedly used to assess RLS severity and health status over time and a 7-day diary once to assess short-term variations. A clinically relevant change of the RLS severity was defined by a change of at least 5 points on the IRLS scale. During 36 months follow-up minimal improvement of RLS severity between assessments was observed. Men consistently reported higher severity scores. RLS severity increased with age reaching a plateau in the age group 45-54 years. During 3 years 60.2% of the participants had no relevant (±5 points) change in RLS severity. RLS worsening was significantly related to an increase in depressive symptoms and a decrease in sleep quality and quality of life. The short-term variation showed distinctive circadian patterns with rhythm magnitudes strongly related to RLS severity. The majority of participants had a stable course of severe RLS over three years. An increase in RLS severity was accompanied by a small to moderate negative, a decrease by a small positive influence on quality of life, depressive symptoms and sleep quality.

Das Grosse Zumahlen Geistliche Elend Des Jüdischen Volckes Bey Gelegenheit Einer Juden-Tauffe : Aus 2. Cor. III, 15.16.17 In der Hospital-Kirche d. 29. Aug. 1743 Der Zahlreichen Gemeinde des Herrn vorgetragen, Und heraus gegeben Von Gottfried Thomas Zeitmann, Evangel. Prediger in Franckfurt am Mayn

Hss. auf Titelbl. Sign. aus Freimann-Kat.:Jud. Ff. 599

Elegia De Eclipsi, Qva in Vmbram Terrae Lvna Incvrrit Ivxta Cor Leonis : D. Vlt. M. Ianvar. H. IIX M. LIIX P. M. Anni Vertentis

Scripta ad Studiosos in Academia Erphordiana, Aut. Barth. Hubnero Philos. & Med. Doctore

Mus Hs 678 - Var: Cor, et Fagott ...

par C. Oestreich

Chronology and petrology of sediment cor DAPC2

Evidence from paleoclimatic archives suggests that Earth's climate experienced rapid temperature changes associated with pronounced interhemispheric asymmetry during the last glacial period. Explanations for these climate excursions have converged on nonlinear interactions between ice sheets and the ocean's thermohaline circulation, but the driving mechanism remains to be identified. Here we use multidecadal marine records of faunal, oxygen isotope, and sediment proxies from the northeast Atlantic proximal to the western margins of the last glacial British Ice Sheet (BIS) to document the coupling between ice sheet dynamics, ocean circulation, and insolation changes. The core data reveal successions of short-lived (80-100 years), high-amplitude ice-rafted debris (IRD) events that were initiated up to 2000 years before the deposition of detrital carbonate during Heinrich events (HE) 1 and 2. Progressive disintegration of the BIS 19-16 kyr before present (B.P.) occurred in response to abrupt ocean-climate warmings that impinged on the northeast Atlantic during the early deglaciation. Peak IRD deposition recurs at 180-220 year intervals plausibly involving repeated breakup of glacial tidewater margins and fringing marine ice shelves. The early deglaciation culminated in a major meltwater pulse at ~16.3 kyr B.P. followed by another discharge associated with HE1 some 300 years after. We conclude that temperature changes related to external forcing and marine heat transport caused a rapid response of the BIS and possibly other margins of the Eurasian Ice Sheet. Massive but short-lived meltwater surges influenced the Atlantic meridional overturning circulation thereby contributing to North Atlantic climate variability and bipolar climatic asymmetry.