Personalized sightseeing tours support using mobile devices

In this paper, we present PSiS (Personalized Sightseeing Tours Recommendation System) Mobile. PSiS Mobile is our proposal to a mobile recommendation and planning support system, which is designed to provide effective support during the tourist visit with context-aware information and recommendations about places of interest (POI), exploiting tourist preferences and context.

Ubiquitous ambient intelligence in a flight decision assistance system

In this paper a new free flight instrument is presented. The instrument named FlyMaster distinguishes from others not only at hardware level, since it is the first one based on a PDA and with an RF interface for wireless sensors, but also at software level once its structure was developed following some guidelines from Ambient Intelligence and ubiquitous and context aware mobile computing. In this sense the software has several features which avoid pilot intervention during flight. Basically, the FlyMaster adequate the displayed information to each flight situation. Furthermore, the FlyMaster has its one way of show information.

Visualização personalizada sensível ao contexto e às emoções

Mestrado em Engenharia Informática

A bilhética dos transportes de passageiros na nuvem computacional

Relatório de Projeto realizado para obtenção do grau de Mestre em Engenharia Informática e de Computadores

PSiS mobile

Os sistemas de recomendação têm vindo a ser cada vez mais utilizados nos últimos anos. Por isso, é imprescindível que estes sistemas se adaptem à evolução da sociedade incluindo cada vez mais novas funcionalidades, tais como a adaptação do sistema ao contexto da pessoa. Esta adaptação pode ser feita através de, por exemplo, dispositivos móveis, que têm vindo a apresentar uma taxa de crescimento de vendas muito grande. Dada a crescente integração dos sistemas de recomendação com os sistemas móveis, foi elaborado um estudo sobre o estado da arte dos sistemas de auxílio ao turista que utilizam dispositivos móveis, sendo apresentadas as suas vantagens e desvantagens. Estes sistemas móveis de auxílio a turistas foram divididos em dois grupos: os que apresentam apenas a informação sobre pontos de interesse e os sistemas que são capazes de efectuar recomendações, com base no perfil do turista. Um breve estudo sobre os sistemas operativos para dispositivos móveis é apresentado, sendo especialmente focado o sistema operativo Android que foi o escolhido para esta implementação. Como os dispositivos móveis, actualmente, ainda possuem várias limitações, estas foram descritas e apresentadas as boas práticas no desenvolvimento de aplicações para este tipo de sistemas. É também apresentado um estudo que visa descobrir qual é o método mais leve e mais rápido para trocar dados entre a parte servidora e a parte móvel. Com a parte introdutória apresentada, é exposto o projecto desenvolvido nesta tese, o PSiS Mobile. Este sistema é um módulo que faz parte do projecto PSiS e pretende trazer todas as vantagens dos sistemas móveis para o sistema base já implementado. O projecto PSiS foca-se no estabelecimento de planos de visita personalizados com indicação de percursos para turistas com tempo limitado. Apoiando a definição de planos de visitas de acordo com o perfil do turista (interesses, valores pessoais, desejos, restrições, deficiências, etc.) combinando os produtos de turismo mais adequados (locais de interesse, eventos, restaurantes, etc.) em itinerários eficientes. A utilização de dispositivos móveis para acompanhamento da visita permite uma rápida interacção entre o turista e o sistema. Assim, o PSiS poderá recolher informação contextual do utilizador para que o perfil do mesmo seja enriquecido. O sistema apresentado é composto por duas partes: a parte cliente e a parte servidora. Toda a informação, como por exemplo o perfil do turista, histórico de viagens e valores de similaridade entre utilizadores está presente na parte servidora. O processo de recomendação também é efectuado pela aplicação servidora, sendo esta a responsável pela atribuição de uma classificação aos pontos de interesse tendo em conta o perfil do utilizador em causa. A base de dados do PSiS possui toda a informação relativa aos pontos de interesse numa determinada cidade ou região e o portfólio completo do histórico de visitas de cada utilizador. A componente móvel é uma parte muito importante para o sistema, pois interage com o utilizador no terreno. Um dispositivo móvel como o PDA, não só permite a apresentação de informação relevante ao utilizador, como também permite a recolha automática de informação contextual (por exemplo, a localização). Toda esta informação contribui para a definição de um perfil completo e para uma melhor adaptação do sistema às necessidades do utilizador. De forma a nem sempre estar dependente do servidor, a aplicação móvel possui rotinas para a realização de recomendações básicas. Ou seja, a aplicação móvel não realiza a classificação dos pontos de interesse, mas apenas mostra os principais resultados já formados pela parte servidora. Por exemplo, se um utilizador gostar de comida Chinesa, um restaurante Chinês nas imediações irá ter uma boa classificação e, por isso, ser recomendado. A aplicação móvel mostra ao turista o percurso definido para o dia em que o mesmo se encontra, sendo feito o rastreio do trajecto que o mesmo efectua. Assim, o sistema consegue saber se o horário do planeamento está a ser cumprido ou não. Caso não esteja, é invocado um algoritmo de planeamento que irá tentar corrigir o atraso ou o adiantamento perante o horário inicial. Depois de visitar um ponto de interesse, é pedido ao utilizador para fornecer feedback sobre o mesmo. Se desejado também é possível mostrar os pontos de interesse existentes perto do turista (usando as coordenadas GPS obtidas pelo dispositivo móvel) organizados por categorias, raio de distância, etc. Apesar dos dispositivos móveis possuírem várias restrições, pretendeu-se proporcionar ao utilizador uma boa experiência, através de uma aplicação rápida, de fácil utilização e adaptável, incluindo funcionalidades de planeamento, realidade aumentada e integração com a rede social do sistema. Todos estes factores contribuem para a disponibilização de informação detalhada ao turista.

Person Localization Using Sensor Information Fusion

Nowadays the incredible grow of mobile devices market led to the need for location-aware applications. However, sometimes person location is difficult to obtain, since most of these devices only have a GPS (Global Positioning System) chip to retrieve location. In order to suppress this limitation and to provide location everywhere (even where a structured environment doesn’t exist) a wearable inertial navigation system is proposed, which is a convenient way to track people in situations where other localization systems fail. The system combines pedestrian dead reckoning with GPS, using widely available, low-cost and low-power hardware components. The system innovation is the information fusion and the use of probabilistic methods to learn persons gait behavior to correct, in real-time, the drift errors given by the sensors.

Recommendation of Tourism Resources Supported by Crowdsourcing

Context-aware recommendation of personalised tourism resources is possible because of personal mobile devices and powerful data filtering algorithms. The devices contribute with computing capabilities, on board sensors, ubiquitous Internet access and continuous user monitoring, whereas the filtering algorithms provide the ability to match the profile (interests and the context) of the tourist against a large knowledge bases of tourism resources. While, in terms of technology, personal mobile devices can gather user-related information, including the user context and access multiple data sources, the creation and maintenance of an updated knowledge base of tourism-related resources requires a collaborative approach due to the heterogeneity, volume and dynamic nature of the resources. The current PhD thesis aims to contribute to the solution of this problem by adopting a Crowdsourcing approach for the collaborative maintenance of the knowledge base of resources, Trust and Reputation for the validation of uploaded resources as well as publishers, Big Data for user profiling and context-aware filtering algorithms for the personalised recommendation of tourism resources.

A flexible navigation system for autonomous robots operating in heterogeneous environments

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Testing low-altitude infrared digital photography from a mini-UAV to retrieve information for biological conservation

Satellite remote sensing imagery is used for forestry, conservation and environmental applications, but insufficient spatial resolution, and, in particular, unavailability of images at the precise timing required for a given application, often prevent achieving a fully operational stage. Airborne remote sensing has the advantage of custom-tuned sensors, resolution and timing, but its price prevents using it as a routine technique for the mentioned fields. Some Unmanned Aerial Vehicles might provide a “third way” solution as low-cost techniques for acquiring remotely sensed information, under close control of the end-user, albeit at the expense of lower quality instrumentation and instability. This report evaluates a light remote sensing system based on a remotely-controlled mini-UAV (ATMOS-3) equipped with a color infra-red camera (VEGCAM-1) designed and operated by CATUAV. We conducted a testing mission over a Mediterranean landscape dominated by an evergreen woodland of Aleppo pine (Pinus halepensis) and (Holm) oak (Quercus ilex) in the Montseny National Park (Catalonia, NE Spain). We took advantage of state-of-the-art ortho-rectified digital aerial imagery (acquired by the Institut Cartogràfic de Catalunya over the area during the previous year) and used it as quality reference. In particular, we paid attention to: 1) Operationality of flight and image acquisition according to a previously defined plan; 2) Radiometric and geometric quality of the images; and 3) Operational use of the images in the context of applications. We conclude that the system has achieved an operational stage regarding flight activities, although with meteorological limits set by wind speed and turbulence. Appropriate landing areas can be sometimes limiting also, but the system is able to land on small and relatively rough terrains such as patches of grassland or short matorral, and we have operated the UAV as far as 7 km from the control unit. Radiometric quality is sufficient for interactive analysis, but probably insufficient for automated processing. A forthcoming camera is supposed to greatly improve radiometric quality and consistency. Conventional GPS positioning through time synchronization provides coarse orientation of the images, with no roll information.

Sistemas heterogéneos adaptativos basados en el contexto

Delivery context-aware adaptative heterogenous systems. Currently, many types of devices that have gained access to the network is large and diverse. The different capabilities and characteristics of them, in addition to the different characteristics and preferences of users, have generated a new goal to overcome: how to adapt the contents taking into account this heterogeneity, known as the “delivery context.” The concepts of adaptation and accessibility have been widely discussed and have resulted in many proposals, standards and techniques designed to solve the problem, making it necessary to refine the analysis of the issue to be considered in the process of adaptation. We present a tour of the various proposals and standards that have marked the area of heterogeneous systems works, and others who have worked since the real-time interaction through agents based platforms. All targeted to solve a common goal: the delivery context

QuesTInSitu: from tests to routes for assessment in situ activities

Test-based assessment tools are mostly focused on the use of computers. However, advanced Information and Communication Technologies, such as handheld devices, opens up the possibilities of creating new assessment scenarios, increasing the teachers’ choices to design more appropriate tests for their subject areas. In this paper we use the term Computing-Based Testing (CBT) instead of Computer-Based Testing, as it captures better the emerging trends. Within the CBT context, the paper is centred on proposing an approach for “Assessment in situ” activities, where questions have to be answered in front of a real space/location (situ). In particular, we present the QuesTInSitu software implementation that includes both an editor and a player based on the IMS Question and Test Interoperability specification and GoogleMaps. With QuesTInSitu teachers can create geolocated questions and tests (routes), and students can answer the tests using mobile devices with GPS when following a route. Three illustrating scenarios and the results from the implementation of one of them in a real educational situation show that QuesTInSitu enables the creation of innovative, enriched and context-aware assessment activities. The results also indicate that the use of mobile devices and location-based systems in assessment activities facilitates students to put explorative and spatial skills into practice and fosters their motivation, reflection and personal observation.

Design de nouvelles fonctionnelles en théorie de la fonctionnelle de la densité et conception de polymères pour application à la photovoltaïque organique

La présente thèse porte sur les calculs utilisant la théorie de la fonctionnelle de la densité (DFT) pour simuler des systèmes dans lesquels les effets à longue portée sont importants. Une emphase particulière est mise sur les calculs des énergies d’excitations, tout particulièrement dans le cadre des applications photovoltaïques. Cette thèse aborde ces calculs sous deux angles. Tout d’abord, des outils DFT déjà bien établis seront utilisés pour simuler des systèmes d’intérêt expérimental. Par la suite, la théorie sous-jacente à la DFT sera explorée, ses limites seront identifiées et de nouveaux développements théoriques remédiant à ceux-ci seront proposés. Ainsi, dans la première partie de cette thèse, des calculs numériques utilisant la DFT et la théorie de la fonctionnelle de la densité dépendante du temps (TDDFT) telles qu’implémentées dans le logiciel Gaussian [1] sont faits avec des fonctionnelles courantes sur des molécules et des polymères d’intérêt expérimental. En particulier, le projet présenté dans le chapitre 2 explore l’utilisation de chaînes latérales pour optimiser les propriétés électroniques de polymères déjà couramment utilisés en photovoltaïque organique. Les résultats obtenus montrent qu’un choix judicieux de chaînes latérales permet de contrôler les propriétés électroniques de ces polymères et d’augmenter l’efficacité des cellules photovoltaïques les utilisant. Par la suite, le projet présenté dans le chapitre 3 utilise la TDDFT pour explorer les propriétés optiques de deux polymères, le poly-3-hexyl-thiophène (P3HT) et le poly-3-hexyl- sélénophène (P3HS), ainsi que leur mélange, dans le but d’appuyer les observations expérimentales indiquant la formation d’exciplexe dans ces derniers. Les calculs numériques effectués dans la première partie de cette thèse permettent de tirer plusieurs conclusions intéressantes, mais mettent également en évidence certaines limites de la DFT et de la TDDFT pour le traitement des états excités, dues au traitement approximatif de l’interaction coulombienne à longue portée. Ainsi, la deuxième partie de cette thèse revient aux fondements théoriques de la DFT. Plus précisément, dans le chapitre 4, une série de fonctionnelles modélisant plus précisément l’interaction coulombienne à longue portée grâce à une approche non-locale est élaborée. Ces fonctionnelles sont basées sur la WDA (weighted density approximation), qui est modifiée afin d’imposer plusieurs conditions exactes qui devraient être satisfaites par le trou d’échange. Ces fonctionnelles sont ensuite implémentées dans le logiciel Gaussian [1] et leurs performances sont évaluées grâce à des tests effectués sur une série de molécules et d’atomes. Les résultats obtenus indiquent que plusieurs de ces fonctionnelles donnent de meilleurs résultats que la WDA. De plus, ils permettrent de discuter de l’importance relative de satisfaire chacune des conditions exactes.

A Conceptual Model for Group Support Systems in Local Councils

This paper proposes a conceptual model of a context-aware group support system (GSS) to assist local council employees to perform collaborative tasks in conjunction with inter- and intra-organisational stakeholders. Most discussions about e-government focus on the use of ICT to improve the relationship between government and citizen, not on the relationship between government and employees. This paper seeks to expose the unique culture of UK local councils and to show how a GSS could support local government employer and employee needs.

A conceptual model for group support systems in local councils

This paper proposes a conceptual model of a context-aware group support system (GSS) to assist local council employees to perform collaborative tasks in conjunction with inter- and intra-organisational stakeholders. Most discussions about e-government focus on the use of ICT to improve the relationship between government and citizen, not on the relationship between government and employees. This paper seeks to expose the unique culture of UK local councils and to show how a GSS could support local government employer and employee needs.