Uma experiência de ensino integrado dos fundamentos matemáticos da ciência da computação

Este trabalho tem por objetivo relatar os resultados preliminares de uma experiência de integração curricular, em andamento na Escola de Informática da UCPel, na área de fundamentos matemáticos da Ciência da Computação. A concepção curricular da experiência está baseada nas idéias de Basil Bernstein sobre currículos de coleção e/ou integração, na idéia de desenvolvimento autônomo do aluno e na organização do ensino em forma semi-presencial (com apoio da Internet) e cooperativa (com apoio de softwares matemáticos).

An iterative analytical design framework for the optimal designing of an off-grid renewable energy based hybrid smart micro-grid

Creative ways of utilising renewable energy sources in electricity generation especially in remote areas and particularly in countries depending on imported energy, while increasing energy security and reducing cost of such isolated off-grid systems, is becoming an urgently needed necessity for the effective strategic planning of Energy Systems. The aim of this research project was to design and implement a new decision support framework for the optimal design of hybrid micro grids considering different types of different technologies, where the design objective is to minimize the total cost of the hybrid micro grid while at the same time satisfying the required electric demand. Results of a comprehensive literature review, of existing analytical, decision support tools and literature on HPS, has identified the gaps and the necessary conceptual parts of an analytical decision support framework. As a result this research proposes and reports an Iterative Analytical Design Framework (IADF) and its implementation for the optimal design of an Off-grid renewable energy based hybrid smart micro-grid (OGREH-SμG) with intra and inter-grid (μG2μG & μG2G) synchronization capabilities and a novel storage technique. The modelling design and simulations were based on simulations conducted using HOMER Energy and MatLab/SIMULINK, Energy Planning and Design software platforms. The design, experimental proof of concept, verification and simulation of a new storage concept incorporating Hydrogen Peroxide (H2O2) fuel cell is also reported. The implementation of the smart components consisting Raspberry Pi that is devised and programmed for the semi-smart energy management framework (a novel control strategy, including synchronization capabilities) of the OGREH-SμG are also detailed and reported. The hybrid μG was designed and implemented as a case study for the Bayir/Jordan area. This research has provided an alternative decision support tool to solve Renewable Energy Integration for the optimal number, type and size of components to configure the hybrid μG. In addition this research has formulated and reported a linear cost function to mathematically verify computer based simulations and fine tune the solutions in the iterative framework and concluded that such solutions converge to a correct optimal approximation when considering the properties of the problem. As a result of this investigation it has been demonstrated that, the implemented and reported OGREH-SμG design incorporates wind and sun powered generation complemented with batteries, two fuel cell units and a diesel generator is a unique approach to Utilizing indigenous renewable energy with a capability of being able to synchronize with other μ-grids is the most effective and optimal way of electrifying developing countries with fewer resources in a sustainable way, with minimum impact on the environment while also achieving reductions in GHG. The dissertation concludes with suggested extensions to this work in the future.

Approximated Poncelet configurations

In this short note we present the approximate construction of closed Poncelet configurations using the simulation of a mathematical pendulum. Although the idea goes back to the work of Jacobi, only the use of modern computer technologies assures the success of the construction. We present also some remarks on using such problems in project based university courses and we present a Matlab program able to produce animated Poncelet configurations with given period. In the same spirit we construct Steiner configurations and we give a few teaching oriented remarks on the Poncelet grid theorem. (DIPF/authors)

BYGUM – a new tool for BarnYard Grass Understanding and Management

Weed management has become increasingly challenging for cotton growers in Australia in the last decade. Glyphosate, the cornerstone of weed management in the industry, is waning in effectiveness as a result of the evolution of resistance in several species. One of these, awnless barnyard grass, is very common in Australian cotton fields, and is a prime example of the new difficulties facing growers in choosing effective and affordable management strategies. RIM (Ryegrass Integrated Management) is a computer-based decision support tool developed for the south-western Australian grains industry. It is commonly used there as a tool for grower engagement in weed management thinking and strategy development. We used RIM as the basis for a new tool that can fulfil the same types of functions for subtropical Australian cotton-grains farming systems. The new tool, BYGUM, provides growers with a robust means to evaluate five-year rotations including testing the economic value of fallows and fallow weed management, winter and summer cropping, cover crops, tillage, different herbicide options, herbicide resistance management, and more. The new model includes several northernregion- specific enhancements: winter and summer fallows, subtropical crop choices, barnyard grass seed bank, competition, and ecology parameters, and more freedom in weed control applications. We anticipate that BYGUM will become a key tool for teaching and driving the changes that will be needed to maintain sound weed management in cotton in the near future.

Beiträge zum Mathematikunterricht 2015. Vorträge auf der 49. Tagung für Didaktik der Mathematik vom 09.02.2015 bis 13.02.2015 in Basel [Band 1]

Die Jahrestagung der Gesellschaft für Didaktik der Mathematik fand im Jahr 2015 zum dritten Mal in der Schweiz statt. [...] Mit rund 300 Vorträgen, 16 moderierten Sektionen, 15 Arbeitskreistreffen und 21 Posterpräsentationen eröffnete sich ein breites Spektrum an Themen und unterschiedlichen Zugangsweisen zur Erforschung von Fragen rund um das Lernen und Lehren von Mathematik. (DIPF/Orig.)

An Assessment of Professional Development for Astronomy and Physics Faculty: Expanding Our Vision of How to Support Faculty's Learning About Teaching

In this thesis, we will explore approaches to faculty instructional change in astronomy and physics. We primarily focus on professional development (PD) workshops, which are a central mechanism used within our community to help faculty improve their teaching. Although workshops serve a critical role for promoting more equitable instruction, we rarely assess them through careful consideration of how they engage faculty. To encourage a shift towards more reflective, research-informed PD, we developed the Real-Time Professional Development Observation Tool (R-PDOT), to document the form and focus of faculty's engagement during workshops. We then analyze video-recordings of faculty's interactions during the Physics and Astronomy New Faculty Workshop, focusing on instances where faculty might engage in pedagogical sense-making. Finally, we consider insights gained from our own local, team-based effort to improve a course sequence for astronomy majors. We conclude with recommendations for PD leaders and researchers.

Prática de ensino supervisionada em educação pré-escolar e ensino do 1º ciclo do ensino básico: explorando a simetria na infância

O presente relatório é referente à investigação realizada no âmbito das unidades curriculares da Prática de Ensino Supervisionada em Pré-Escolar e 1.º Ciclo do Ensino Básico, do Mestrado em Educação Pré-Escolar e Ensino do 1.º Ciclo do Ensino Básico, da Universidade de Évora. A investigação foi realizada em contexto de uma sala de Pré-Escolar e em contexto de 1.º Ciclo do Ensino Básico, numa turma de 2.º ano. Os dois contextos fazem parte da Escola Manuel Ferreira Patrício, sede do Agrupamento de Escolas n.º 1 de Évora. A respetiva investigação teve como objetivos compreender, analisar e refletir acerca da exploração da simetria de reflexão em Pré-Escolar e em 1.º Ciclo do Ensino Básico. Deste modo, era pretendido responder às seguintes questões: “Como lidam as/os crianças/alunos com a identificação e a exploração de simetria de reflexão?” e “Que práticas devo desenvolver que contribuam para a compreensão e utilização da simetria de reflexão por parte das crianças?”. No decorrer da investigação foi desenvolvida uma intervenção didática em cada contexto, consistindo em sequências de tarefas de exploração de simetria que se caracterizaram por recorrer a diversos materiais e ao computador com o programa SIMIS, em 1.º Ciclo, com tarefas abertas de natureza exploratória. A recolha de dados apoiou-se nos cadernos de formação relativos às PES, nas planificações, nas produções das crianças, em respostas às tarefas e excertos dos diálogos havidos. Esta investigação permitiu verificar que é possível explorar a simetria no Pré- Escolar e 1.ºCiclo de Ensino Básico, uma vez que as crianças reconheceram figuras com simetria, conseguiram identificar eixos de simetria em figuras e construíram figuras simétricas. Para tal, desenvolveram-se práticas que contribuíram para a compreensão e utilização da simetria, através de estratégias de ensino-aprendizagem exploratório da Matemática, com recurso a materiais manipuláveis e a software específico, que mostraram ser ferramentas essenciais nas tarefas de exploração e identificação de simetria; ABSTRACT: The present report refers to research developed in the context of Supervised Teaching Practice in Pre-school Education and in Primary School, integrated in Master’s degree in Pre-school Education and Teaching Primary School at University of Évora. The research was conducted in context of a pre-school room and in context of 1st cycle of basic education, in a 2nd class year. The two contexts are part of the Manuel Ferreira Patrício School, headquarters of cluster of Évora schools. The respective research has aimed understand, analyze and reflect about reflection symmetry exploration, in Pre-school and in Primary School. Thus, was intented to answer the questions: “How childrens deal with the identification and exploration of reflection symmetry?" And "What practices should be developed to contribute to the understanding and use of reflection symmetry by childrens?". During the research it was developed a didactic intervention, in each context, consisting of sequences of symmetry exploration tasks that featured by resorting to diverse materials and the computer with the SIMIS program in the Primary School, with open tasks exploratory. Data collection builds on the training books on STP, the flat patterns, in productions of children, in response tasks and excerpts from the additions accruing dialogues. This research has shown that it is possible to explore the symmetry in Preschool and Primary School, since children recognized figures with symmetry, they were able to identify lines of symmetry in figures and built symmetrical figures. For such practices have developed that have contributed to the understanding and use of symmetry, through exploratory teaching and learning strategies of mathematics, using manipulatives and specific software, which proved to be essential tools in the exploration tasks and identification symmetry.

O ensino e aprendizagem da programação de computadores no ensino a distância : uma proposta de instanciação do modelo pedagógico virtual da Universidade Aberta

Hoje em dia o ensino e aprendizagem a distância online de nível universitário é, em grande medida, baseado em estratégias de aprendizagem colaborativa, onde, além de aprender sozinho, os estudantes também participam de ações colaborativas dentro de uma classe virtual. O nível de interação do estudante online representa um fator fundamental para o sucesso do processo de ensino-aprendizagem pois é a base da partilha de informação e construção do conhecimento entre estudantes e professores, enquanto todas as ações e atividades integram um modelo pedagógico comum. Existem muitas diferenças e desafios nas áreas de ensino em termos de instanciação do modelo pedagógico e adoção das estratégias de ensino-aprendizagem, como por exemplo, entre as áreas das ciências sociais e das engenharias. Uma área que atrai especial atenção como um todo é a das ciências da computação (CS), e de forma específica, a da programação de computadores. A programação de computadores exige, em primeiro lugar, o desenvolvimento de um bom raciocínio lógico e uma estratégia de resolução segundo uma abordagem “dividir para conquistar”, onde os principais problemas são divididos em problemas menores que são resolvidos individualmente. A programação exige também uma combinação entre o trabalho individual e em grupo, com elevados níveis de revisão e depuração do código fonte em desenvolvimento. O ensino online de programação de computadores é constituído por estes aspectos, exigindo um elevado grau de interação entre estudantes e entre estudantes e professor. Neste capítulo, vamos discutir e apresentar a nossa experiência no ensino online da programação de computadores com base no modelo pedagógico virtual da Universidade Aberta, e propor a sua instanciação e extensão específica para incluir novas estratégias de aprendizagem colaborativa e uma abordagem construtivista para o processo global de aprendizagem.

Stepping-motor-driven constant-shear-rate rotating viscometer

Despite the frequent use of stepping motors in robotics, automation, and a variety of precision instruments, they can hardly be found in rotational viscometers. This paper proposes the use of a stepping motor to drive a conventional constant-shear-rate laboratory rotational viscometer to avoid the use of velocity sensor and gearbox and, thus, simplify the instrument design. To investigate this driving technique, a commercial rotating viscometer has been adapted to be driven by a bipolar stepping motor, which is controlled via a personal computer. Special circuitry has been added to microstep the stepping motor at selectable step sizes and to condition the torque signal. Tests have been carried out using the prototype to produce flow curves for two standard Newtonian fluids (920 and 12 560 mPa (.) s, both at 25 degrees C). The flow curves have been obtained by employing several distinct microstep sizes within the shear rate range of 50-500 s(-1). The results indicate the feasibility of the proposed driving technique.

The interaction between technologies and society: Lessons learnt from 160 evolutionary years of online news services

In mapping the evolutionary process of online news and the socio-cultural factors determining this development, this paper has a dual purpose. First, in reworking the definition of “online communication”, it argues that despite its seemingly sudden emergence in the 1990s, the history of online news started right in the early days of the telegraphs and spread throughout the development of the telephone and the fax machine before becoming computer-based in the 1980s and Web-based in the 1990s. Second, merging macro-perspectives on the dynamic of media evolution by DeFleur and Ball-Rokeach (1989) and Winston (1998), the paper consolidates a critical point for thinking about new media development: that something technically feasible does not always mean that it will be socially accepted and/or demanded. From a producer-centric perspective, the birth and development of pre-Web online news forms have been more or less generated by the traditional media’s sometimes excessive hype about the power of new technologies. However, placing such an emphasis on technological potentials at the expense of their social conditions not only can be misleading but also can be detrimental to the development of new media, including the potential of today’s online news.

On-line analysis of froth surface in coal and mineral flotation using JKFrothCam

The personal computer revolution has resulted in the widespread availability of low-cost image analysis hardware. At the same time, new graphic file formats have made it possible to handle and display images at resolutions beyond the capability of the human eye. Consequently, there has been a significant research effort in recent years aimed at making use of these hardware and software technologies for flotation plant monitoring. Computer-based vision technology is now moving out of the research laboratory and into the plant to become a useful means of monitoring and controlling flotation performance at the cell level. This paper discusses the metallurgical parameters that influence surface froth appearance and examines the progress that has been made in image analysis of flotation froths. The texture spectrum and pixel tracing techniques developed at the Julius Kruttschnitt Mineral Research Centre are described in detail. The commercial implementation, JKFrothCam, is one of a number of froth image analysis systems now reaching maturity. In plants where it is installed, JKFrothCam has shown a number of performance benefits. Flotation runs more consistently, meeting product specifications while maintaining high recoveries. The system has also shown secondary benefits in that reagent costs have been significantly reduced as a result of improved flotation control. (C) 2002 Elsevier Science B.V. All rights reserved.

Treinabem: treinamento nacional b??sico em microinform??tica

Este projeto refere-se ?? implementa????o de processos de treinamento em microinform??tica realizada pela Dataprev, utilizando uma metodologia autoinstrucional - CBT (Computer Based Trainning). Esta metodologia foi adotada no programa TREINABEM, o que possibilitou uma economia de custos consider??vel, al??m de levar a uma mudan??a cultural a favor do aprendizado aut??nomo e cont??nuo

Utilization of Interactive Internet in High Education

The present work reports on the practical cooperation between two Universities from Hungary and Portugal. Students from Portugal are remotely accessing an experimental facility, which is physically in Hungary. The cooperation among these Higher Education establishments allowed the development and testing of a Remote Laboratory at the BME. This paper reports on the characteristics and initial testing of the Thermocouples Rise Time Measurement System and provides information on development and students' feedback.

Controlador dedicado de Ecrãs LCD/TFT

Para dar resposta aos grandes avanços tecnológicos e, consequentemente, à postura mais exigente dos clientes, a empresa Francisco Parracho – Electrónica Industrial, Lda., que tem actividade no ramo dos elevadores, decidiu introduzir no mercado um controlador dedicado de ecrãs Liquid Crystal Display / Thin Film Transistor (LCD / TFT). O objectivo é substituir um sistema suportado por um computador, caracterizado pelas suas elevadas dimensões e custos, mas incontornável até à data, nomeadamente para resoluções de ecrã elevadas. E assim nasceu este trabalho. Com uma selecção criteriosa de todos os componentes e, principalmente, sem funcionalidades inúteis, obteve-se um sistema embebido com dimensões e custos bem mais reduzidos face ao seu opositor. O ecrã apontado para este projecto é um Thin Film Transistor – Liquid Crystal Display (TFT-LCD) da Sharp de 10.4” de qualidade industrial, com uma resolução de 800 x 600 píxeis a 18 bits por píxel. Para tal, foi escolhido um micro-controlador da ATMEL, um AVR de 32 bits que, entre outras características, possui um controlador LCD que suporta resoluções até 2048 x 2048 píxeis, de 1 a 24 bits por píxel. Atendendo ao facto deste produto ser inserido na área dos elevadores, as funcionalidades, quer a nível do hardware quer a nível do software, foram projectadas para este âmbito. Contudo, o conceito aqui exposto é adjacente a quaisquer outras áreas onde este produto se possa aplicar, até porque o software está feito para se tornar bem flexível. Com a ajuda de um kit de desenvolvimento, foram validados os drivers dos controladores e periféricos base deste projecto. De seguida, aplicou-se esse software numa placa de circuito impresso, elaborada no âmbito deste trabalho, para que fossem cumpridos todos os requisitos requeridos pela empresa patrocinadora: - Apresentação de imagens no ecrã consoante o piso; - Possibilidade de ter um texto horizontalmente deslizante;Indicação animada do sentido do elevador; - Representação do piso com deslizamento vertical; - Descrição sumária do directório de pisos também com deslizamento vertical; - Relógio digital; - Leitura dos conteúdos pretendidos através de um cartão SD/MMC; - Possibilidade de actualização dos conteúdos via USB flash drive.

Learner’s satisfaction within a breast imaging eLearning course for radiographers

Background: An asynchronous eLearning system was developed for radiographers in order to promote a better knowledge about senology and mammography. Objectives: to assess the learners’ satisfaction. Methods: Target population included radiographers and radiogr aphy students, in order to assess eLearning satisfaction according to different experience levels in breast imaging. Satisfaction was measured through a questionnaire developed especially for eLearning systems, using a seven - point Likert scale. Main topics related are content, interface, personalization and learning community. Results: Overall, 85% of learners were satisfied with the course and 87,5% considered that the course is successful. Main areas that were evaluated by most learners in a positive way were interface and content (between six and seven - point); on the other hand, learning community presented a wider distribution of answers . Conclusions: The course provides an overall high degree of learner satisfaction, thus providing more effective knowle dge gain on breast imaging for radiographers.