Analysis of variance of primary data on plant growth analysis

Plant growth analysis presents difficulties related to statistical comparison of growth rates, and the analysis of variance of primary data could guide the interpretation of results. The objective of this work was to evaluate the analysis of variance of data from distinct harvests of an experiment, focusing especially on the homogeneity of variances and the choice of an adequate ANOVA model. Data from five experiments covering different crops and growth conditions were used. From the total number of variables, 19% were originally homoscedastic, 60% became homoscedastic after logarithmic transformation, and 21% remained heteroscedastic after transformation. Data transformation did not affect the F test in one experiment, whereas in the other experiments transformation modified the F test usually reducing the number of significant effects. Even when transformation has not altered the F test, mean comparisons led to divergent interpretations. The mixed ANOVA model, considering harvest as a random effect, reduced the number of significant effects of every factor which had the F test modified by this model. Examples illustrated that analysis of variance of primary variables provides a tool for identifying significant differences in growth rates. The analysis of variance imposes restrictions to experimental design thereby eliminating some advantages of the functional growth analysis.

Feeding and arrestment responses of Diabrotica speciosa to cucurbitacin-content formulations

The objective of this work was to evaluate arrestant and stimulant feeding effects on Diabrotica speciosa (Ger.), using cucurbitacin-content starch-based formulations prepared with varying starch sources, and adding potassium lignate. In a glass slide assay, the wash off resistance of formulations was compared. Potassium lignate did not improve wash off resistance. Lagenaria vulgaris L. powder, in which cucurbitacin B concentration was determined as 0.28%, was added to the most adhesive formulation. The resultant material was used in a two-choice assay in which leaves of common bean, Phaseolus vulgaris L., treated with concentrations of 2.5%, 5%, 10%, 15% and 20% were offered to insects together with untreated control leaves. Greater number of insects and leaves consumed were found on leaves treated with cucurbitacin-content formulation (2.5%, 5% - greatest response -, 10% and 15% concentrations) than on untreated control leaves. The concentration, in which responses were higher, was sprayed in a bean field at 1,000, 1,900 and 3,000 g ha-1. Greater number of beetles was found in plots treated with the highest dosage, 3 and 6 days after spraying. Ten days after spraying, no significant differences were found among dosages, probably due to washoff of the bait.

Winter pasture and cover crops and their effects on soil and summer grain crops

The objective of this work was to evaluate the effect of winter land use on the amount of residual straw, the physical soil properties and grain yields of maize, common bean and soybean summer crops cultivated in succession. The experiment was carried out in the North Plateau of Santa Catarina state, Brazil, from May 2006 to April 2010. Five strategies of land use in winter were evaluated: intercropping with black oat + ryegrass + vetch, without grazing and nitrogen (N) fertilization (intercropping cover); the same intercropping, with grazing and 100 kg ha-1 of N per year topdressing (pasture with N); the same intercropping, with grazing and without nitrogen fertilization (pasture without N); oilseed radish, without grazing and nitrogen fertilization (oilseed radish); and natural vegetation, without grazing and nitrogen fertilization (fallow). Intercropping cover produces a greater amount of biomass in the system and, consequently, a greater accumulation of total and particulate organic carbon on the surface soil layer. However, land use in winter does not significantly affect soil physical properties related to soil compaction, nor the grain yield of maize, soybean and common bean cultivated in succession.

Identification of Phaeoisariopsis griseola pathotypes from five States in Brazil

Due to the increased importance of angular leaf spot of common bean (Phaseolus vulgaris) in Brazil, monitoring the pathogenic variability of its causal agent (Phaeoisariopsis griseola) is the best strategy for a breeding program aimed at developing resistant genotypes. Fifty one isolates of P. griseola collected in five Brazilian States were tested on a set of 12 international differential cultivars in the greenhouse. When inoculated plants showed symptoms but no sporulation was observed, they were transferred to a moist chamber for approximately 20-24 h. After this period of time, if no sporulation was observed, the plants were considered resistant; otherwise, they were considered susceptible. From the fifty-one tested isolates, seven different pathotypes were identified. No Andean pathotypes were identified; consequently, all isolates were classified as Middle American pathotypes. Pathotype 63-31 was the most widespread. Pathotype 63-63 overcame resistance genes present in all differential cultivars and also the resistance gene(s) present in the cultivar AND 277. This fact has important implications for breeding angular leaf spot resistance in beans, and suggests that searching for new resistance genes to angular leaf spot must be pursued.

Genetic linkage map of Phaseolus vulgaris and identification of QTLs responsible for resistance to Xanthomonas axonopodis pv. phaseoli

Common bean (Phaseolus vulgaris) cultivars with a high degree of resistance to Xanthomonas axonopodis pv. phaseoli (Xap) are not available in Brazil. Despite many studies, a low degree of resistance to Xap continues to exist due to its complex genetic inheritance, which is not well known. The objectives of this research were to complement a common bean genetic map based on the cross between a susceptible genotype 'HAB-52' and a resistant genotype 'BAC-6', and to map and analyze genomic regions (quantitative trait loci – QTLs) related to Xap resistance. Eleven linkage groups were determined using 143 RAPD markers, covering 1,234.5 cM of the genome. This map was used to detect QTLs associated with Xap resistance on leaves and pods. The averages of disease severity on leaves (represented by the transformed disease index – TDI) and pods (represented by the diameter of lesion on pods – DLP) were added to the data of the linkage map. Five TDI QTLs and only one LDP QTL were detected. The TDI QTLs were placed in the A, B, G and J linkage groups, with phenotypic variations ranging from 12.7 to 71.6%. The DLP QTL explained 12.9% of the phenotypic variation and was mapped in a distinct linkage group. These results indicate that there are different genes involved in the control of resistance on leaves and pods.

Cytogenetics of Colletotrichum lindemuthianum (Glomerella cingulata f. sp. phaseoli)

Cytogenetic and morphological studies were conducted with Colletotrichum lindemuthianum (Glomerella cingulata f. sp. phaseoli), the pathogen responsible for anthracnose of common bean (Phaseolus vulgaris). In this species, there is some evidence of genomic variation but it is unknown whether the process occurs in a manner similar to other fungal genetic models. Six isolates from bean plants were used and sexual reproduction was observed in vitro. Meiosis and ascospore formation were investigated by cytogenetical approaches and light microscopy. To study the nucleus and chromosome numbers, a mixture of carmine and orcein propionic dyes was used. Nucleus divisions as well as ascospore maturation were asynchronous. Meiosis was observed in three isolates. In the asexual form, chromosomal polymorphism in conidia was also observed microscopically and the mitosis process was described.

Genetic divergence among and within Colletotrichum lindemuthianum races assessed by RAPD

Genetic divergence within and among races of Colletotrichum lindemuthianum was determined using RAPD markers. In addition to the different races of the fungus three isolates of the sexual stage of Colletotrichum lindemuthianum (Glomerella cingulata f.sp. phaseoli) were included in this study. The band patterns generated using 11 primers produced 133 polymorphic bands. The polymorphic bands were used to determine genetic divergence among and within the pathogen races. The isolates analyzed were divided into six groups with 0.75 relative similarity. Group VI, formed by three isolates of the sexual phase of Colletotrichum lindemuthianum, was the most divergent. Races previously determined using differential cultivars did not correlate with the results obtained using RAPD markers.

Identification of Races of Selected Isolates of Uromyces appendiculatus from Minas Gerais (Brazil) Based on the new international classification system

Twelve single-pustule isolates of Uromyces appendiculatus, the etiological agent of common bean rust, were collected in the state of Minas Gerais, Brazil, and classified according to the new international differential series and the binary nomenclature system proposed during the 3rd Bean Rust Workshop. These isolates have been used to select rust-resistant genotypes in a bean breeding program conducted by our group. The twelve isolates were classified into seven different physiological races: 21-3, 29-3, 53-3, 53-19, 61-3, 63-3 and 63-19. Races 61-3 and 63-3 were the most frequent in the area. They were represented by five and two isolates, respectively. The other races were represented by just one isolate. This is the first time the new international classification procedure has been used for U. appendiculatus physiological races in Brazil. The general adoption of this system will facilitate information exchange, allowing the cooperative use of the results obtained by different research groups throughout the world. The differential cultivars Mexico 309, Mexico 235 and PI 181996 showed resistance to all of the isolates that were characterized. It is suggested that these cultivars should be preferentially used as sources for resistance to rust in breeding programs targeting development lines adapted to the state of Minas Gerais.

Is it necessary to soak rice grains to prepare Rhizoctonia solani AG-4 inoculum?

A study was conducted to evaluate the effects on the development of root rot on common bean, cv. 'Dufrix' after treatment with four volumes of water (0, 30%, 60%, and 90%, v/w) added to rice grains previously immersed in water for 24 hours before autoclaving and colonization of grains by Rhizoctoniasolani AG-4. Colonized rice grains and non-infested rice grains were mixed in pots with sterilized soil and sand (2:1), where beans were sown. Based on results of area under plant emergence curve, plant height, plant dry weight, and disease severity, we conclude that inoculum is more effective in causing disease when no water is added to the rice grains before autoclaving.

Susceptibility of leguminous green manure species to Rhizoctonia solani and Sclerotium rolfsii

We studied the susceptibility of species used as green manure in common bean fields to root rot (Rhizoctonia solani) and southern blight (Sclerotium rolfsii). Seeds of Crotalaria breviflora, Canavalia ensiformis, Cajanus cajan, Dolichos lablab, Stizolobium cinereum, S. aterrimum, and the bean cvs. "Pérola", "Valente" and "Carnaval" were sown in soil infested by either R. solani AG-4 or S. rolfsii in greenhouse. The emergence of D. lablab seedlings in soil infested by R. solani dropped to 62%. C. breviflora, C. ensiformis and cv. "Valente" presented the lowest root rot severity. The pathogen S. rolfsii drastically reduced seedling emergence in all species; no C. cajan and S. cinereum seedling emerged. All plant species presented high southern blight severity. We conclude that leguminous crops are not suitable as green manure for areas of bean cultivation with high R. solani and S. rolfsii populations.

Weed mapping using a machine vision system

Weed mapping is a useful tool for site-specific herbicide applications. The objectives of this study were (1) to determine the percentage of land area covered by weeds in no-till and conventionally tilled fields of common bean using digital image processing and geostatistics, and (2) to compare two types of cameras. Two digital cameras (color and infrared) and a differential GPS were affixed to a center pivot structure for image acquisition. Sample field images were acquired in a regular grid pattern, and the images were processed to estimate the percentage of weed cover. After calculating the georeferenced weed percentage values, maps were constructed using geostatistical techniques. Based on the results, color images are recommended for mapping the percentage of weed cover in no-till systems, while infrared images are recommended for weed mapping in conventional tillage systems.

Corn and soybean yields as affected by cover crops and herbicide timing under no-tillage system

To achieve better results in the no-tillage system (NTS), it is important to properly manage the cover crop prior to planting by using herbicides, usually glyphosate. The effect of glyphosate on plant coverage is slow, and plants take a few days to die completely. Thus, when applying the herbicide on the same day of planting soybean or corn, cover crops are still alive and standing, causing initial shading on seedlings of the crop and delaying its establishment. Therefore, this study aimed to evaluate the effect of distinct cover crops and their timing of desiccation prior to planting soybean or corn, on crop yield and yield components. Two experiments were installed, one for soybean and another for corn. Each experiment consisted in combining three cover crops (Brachiaria brizantha, common bean or millet) chemically desiccated at two timings before planting the crop (15 or 0 days before planting) under no-tillage system (NTS). Experiments were installed in a completely randomized block design with five replications. Brachiaria brizantha produced the highest amount of biomass; common bean and millet as cover crops allowed higher soybean grain yields; herbicide application under common bean, millet and Brachiaria brizantha 15 days before planting soybean allowed higher crop grain yields; desiccation timing of common bean did not affect corn grain yield; Brachiaria brizantha should be desiccated 15 days before planting corn to allow maximum grain yield; when millet was used as a cover crop, glyphosate application at planting of corn allowed the highest grain yield.

Use of RAPD-PCR to identify true hybrid plants from crosses between closely related progenitors

RAPD-PCR molecular markers were used to identify common bean and soybean hybrid plants derived from crosses between closely related progenitors, with no apparent phenotypic differences. Primers OP-F12 and OP-0O3 were used to identify true hybrids derived from crosses between common bean cultivars Rudá (A 285) and AN 910408, and soybean cultivars Cristalina and Bossier, respectively. Each primer generated one polymorphic DNA band which was present in the male progenitor and absent in the female progenitor. As RAPD bands are normally inherited as dominant characters, the presence of these bands in the F1 plants confirmed their status.

Comparison between the availability of iron in the presence of vitamin a and β-carotene in foods and medications

The objective of this work was to verify the availability of iron in the presence of vitamin A as components of foods and in combinations with medicines. The iron available was measured in the presence of vitamin A in foods - common bean (B), beef liver (Li) and carrot (C) - and medicines - Fer-In-Sol® (Fer) (Mead Johnson), Arovit® (A) (Roche) and Neutrofer® (N) (Sigma Pharma) - as well as in combinations of both. β-carotene, vitamin A, total iron, heme and non heme iron, percentage of dialyzable iron and amount of dialyzable iron was determined. Vitamin A and β-carotene had a positive effect on the percentage of iron dialysis. Carrot and liver had a better percentage of dialyzable iron than their respective medicine at similar concentrations. Therefore, we can conclude that there has been an influence of vitamin A over the dialysis of iron, being the mixtures containing liver the ones which achieved the highest concentrations of dialyzable iron, and also that, according to the amounts needed to obtain the daily recommended intake of iron, they are good for consumption.

The identification of genes important in pseudomonas syringae pv. phaseolicola plant colonisation using in vitro screening of transposon libraries

The bacterial plant pathogen Pseudomonas syringae pv. phaseolicola (Pph) colonises the surface of common bean plants before moving into the interior of plant tissue, via wounds and stomata. In the intercellular spaces the pathogen proliferates in the apoplastic fluid and forms microcolonies (biofilms) around plant cells. If the pathogen can suppress the plant’s natural resistance response, it will cause halo blight disease. The process of resistance suppression is fairly well understood, but the mechanisms used by the pathogen in colonisation are less clear. We hypothesised that we could apply in vitro genetic screens to look for changes in motility, colony formation, and adhesion, which are proxies for infection, microcolony formation and cell adhesion. We made transposon (Tn) mutant libraries of Pph strains 1448A and 1302A and found 106/1920 mutants exhibited alterations in colony morphology, motility and biofilm formation. Identification of the insertion point of the Tn identified within the genome highlighted, as expected, a number of altered motility mutants bearing mutations in genes encoding various parts of the flagellum. Genes involved in nutrient biosynthesis, membrane associated proteins, and a number of conserved hypothetical protein (CHP) genes were also identified. A mutation of one CHP gene caused a positive increase in in planta bacterial growth. This rapid and inexpensive screening method allows the discovery of genes important for in vitro traits that can be correlated to roles in the plant interaction