The influence of cellular source on periodontal regeneration using calcium phosphate coated polycaprolactone scaffold supported cell sheets

Cell-based therapy is considered a promising approach to achieving predictable periodontal regeneration. In this study, the regenerative potential of cell sheets derived from different parts of the periodontium (gingival connective tissue, alveolar bone and periodontal ligament) were investigated in an athymic rat periodontal defect model. Periodontal ligament (PDLC), alveolar bone (ABC) and gingival margin-derived cells (GMC) were obtained from human donors. The osteogenic potential of the primary cultures was demonstrated in vitro. Cell sheets supported by a calcium phosphate coated melt electrospun polycaprolactone (CaP-PCL) scaffold were transplanted to denuded root surfaces in surgically created periodontal defects, and allowed to heal for 1 and 4 weeks. The CaP-PCL scaffold alone was able to promote alveolar bone formation within the defect after 4 weeks. The addition of ABC and PDLC sheets resulted in significant periodontal attachment formation. The GMC sheets did not promote periodontal regeneration on the root surface and inhibited bone formation within the CaP-PCL scaffold. In conclusion, the combination of either PDLC or ABC sheets with a CaP-PCL scaffold could promote periodontal regeneration, but ABC sheets were not as effective as PDLC sheets in promoting new attachment formation.

Pro-osteogenic topographical cues promote early activation of osteoprogenitor differentiation via enhanced TGFβ, Wnt, and Notch signaling

Objectives Titanium implant surfaces with modified topographies have improved osteogenic properties in vivo. However, the molecular mechanisms remain obscure. This study explored the signaling pathways responsible for the pro-osteogenic properties of micro-roughened (SLA) and chemically/nanostructurally (modSLA) modified titanium surfaces on human alveolar bone-derived osteoprogenitor cells (BCs) in vitro. Materials and methods The activation of stem cell signaling pathways (TGFβ/BMP, Wnt, FGF, Hedgehog, Notch) was investigated following early exposure (24 and 72 h) of BCs to SLA and modSLA surfaces in the absence of osteogenic cell culture supplements. Results Key regulatory genes from the TGFβ/BMP (TGFBR2, BMPR2, BMPR1B, ACVR1B, SMAD1, SMAD5), Wnt (Wnt/β-catenin and Wnt/Ca2+) (FZD1, FZD3, FZD5, LRP5, NFATC1, NFATC2, NFATC4, PYGO2, LEF1) and Notch (NOTCH1, NOTCH2, NOTCH4, PSEN1, PSEN2, PSENEN) pathways were upregulated on the modified surfaces. These findings correlated with a higher expression of osteogenic markers bone sialoprotein (IBSP) and osteocalcin (BGLAP), and bone differentiation factors BMP2, BMP6, and GDF15, as observed on the modified surfaces. Conclusions These findings demonstrate that the activation of the pro-osteogenic cell signaling pathways by modSLA and SLA surfaces leads to enhanced osteogenic differentiation as evidenced after 7 and 14 days culture in osteogenic media and provides a mechanistic insight into the superior osseointegration on the modified surfaces observed in vivo.

Association between postmenopausal osteoporosis and experimental periodontitis

To investigate the correlation between postmenopausal osteoporosis (PMO) and the pathogenesis of periodontitis, ovariectomized rats were generated and the experimental periodontitis was induced using a silk ligature. The inflammatory factors and bone metabolic markers were measured in the serum and periodontal tissues of ovariectomized rats using an automatic chemistry analyzer, enzyme-linked immunosorbent assays, and immunohistochemistry. The bone mineral density of whole body, pelvis, and spine was analyzed using dual-energy X-ray absorptiometry and image analysis. All data were analyzed using SPSS 13.0 statistical software. It was found that ovariectomy could upregulate the expression of interleukin- (IL-)6, the receptor activator of nuclear factor-κB ligand (RANKL), and osteoprotegerin (OPG) and downregulate IL-10 expression in periodontal tissues, which resulted in progressive alveolar bone loss in experimental periodontitis. This study indicates that changes of cytokines and bone turnover markers in the periodontal tissues of ovariectomized rats contribute to the damage of periodontal tissues.

RANKL expression in periodontal disease : where does RANKL come from?

Periodontitis is an inflammatory disease characterized by periodontal pocket formation and alveolar bone resorption. Periodontal bone resorption is induced by osteoclasts and receptor activator of nuclear factor-κB ligand (RANKL) which is an essential and central regulator of osteoclast development and osteoclast function. Therefore, RANKL plays a critical role in periodontal bone resorption. In this review, we have summarized the sources of RANKL in periodontal disease and explored which factors may regulate RANKL expression in this disease.

Silicate-based bioceramics for periodontal regeneration

Periodontal disease is characterized by the destruction of the tissues that attach the tooth to the alveolar bone. Various methods for regenerative periodontal therapy including the use of barrier membranes, bone replacement grafts, and growth factor delivery have been investigated; however, true regeneration of periodontal tissue is still a significant challenge to scientists and clinicians. The focus on periodontal tissue engineering has shifted from attempting to recreate tissue replacements/constructs to the development of biomaterials that incorporate and release regulatory signals to achieve in situ periodontal regeneration. The release of ions and molecular cues from biomaterials may help to unlock latent regenerative potential in the body by regulating cell proliferation and differentiation towards different lineages (e.g. osteoblasts and cementoblasts). Silicate-based bioactive materials, including bioactive silicate glasses and ceramics, have become the materials of choice for periodontal regeneration, due to their favourable osteoconductivity and bioactivity. This article will focus on the most recent advances in the in vitro and in vivo biological application of silicate-based ceramics, specifically as it relates to periodontal tissue engineering.

Advanced tissue engineering scaffold design for regeneration of the complex hierarchical periodontal structure

AIM: This study investigated the ability of an osteoconductive biphasic scaffold to simultaneously regenerate alveolar bone, periodontal ligament and cementum. MATERIALS AND METHODS: A biphasic scaffold was built by attaching a fused deposition modelled bone compartment to a melt electrospun periodontal compartment. The bone compartment was coated with a calcium phosphate (CaP) layer for increasing osteoconductivity, seeded with osteoblasts and cultured in vitro for 6 weeks. The resulting constructs were then complemented with the placement of PDL cell sheets on the periodontal compartment, attached to a dentin block and subcutaneously implanted into athymic rats for 8 weeks. Scanning electron microscopy, X-ray diffraction, alkaline phosphatase and DNA content quantification, confocal laser microscopy, micro computerized tomography and histological analysis were employed to evaluate the scaffold's performance. RESULTS: The in vitro study showed that alkaline phosphatase activity was significantly increased in the CaP-coated samples and they also displayed enhanced mineralization. In the in vivo study, significantly more bone formation was observed in the coated scaffolds. Histological analysis revealed that the large pore size of the periodontal compartment permitted vascularization of the cell sheets, and periodontal attachment was achieved at the dentin interface. CONCLUSIONS: This work demonstrates that the combination of cell sheet technology together with an osteoconductive biphasic scaffold could be utilized to address the limitations of current periodontal regeneration techniques.

Multiphasic scaffolds for periodontal tissue engineering

For a successful clinical outcome, periodontal regeneration requires the coordinated response of multiple soft and hard tissues (periodontal ligament, gingiva, cementum, and bone) during the wound-healing process. Tissue-engineered constructs for regeneration of the periodontium must be of a complex 3-dimensional shape and adequate size and demonstrate biomechanical stability over time. A critical requirement is the ability to promote the formation of functional periodontal attachment between regenerated alveolar bone, and newly formed cementum on the root surface. This review outlines the current advances in multiphasic scaffold fabrication and how these scaffolds can be combined with cell- and growth factor-based approaches to form tissue-engineered constructs capable of recapitulating the complex temporal and spatial wound-healing events that will lead to predictable periodontal regeneration. This can be achieved through a variety of approaches, with promising strategies characterized by the use of scaffolds that can deliver and stabilize cells capable of cementogenesis onto the root surface, provide biomechanical cues that encourage perpendicular alignment of periodontal fibers to the root surface, and provide osteogenic cues and appropriate space to facilitate bone regeneration. Progress on the development of multiphasic constructs for periodontal tissue engineering is in the early stages of development, and these constructs need to be tested in large animal models and, ultimately, human clinical trials.

Periodontitis and peri-implantitis biomarkers in human oral fluids and the null-allele mouse model

Tissue destruction associated with the periodontal disease progression is caused by a cascade of host and microbial factors and proteolytic enzymes. Aberrant laminin-332 (Ln-332), human beta defensin (hBD), and matrix metalloproteinase (MMP) functions have been found in oral inflammatory diseases. The null-allele mouse model appears as the next step in oral disease research. The MMP-8 knock-out mouse model allowed us to clarify the involvement of MMP-8 in vivo in oral and related inflammatory diseases where MMP-8 is suggested to play a key role in tissue destruction. The cleaved Ln-332 γ2-chain species has been implicated in the apical migration of sulcular epithelial cells during the formation of periodontal pockets. We demonstrated that increased Ln-332 fragment levels in gingival crevicular fluid (GCF) are strongly associated with the severity of inflammation in periodontitis. Porphyromonas gingivalis trypsin-like proteinase can cleave an intact Ln-332 γ2-chain into smaller fragments and eventually promote the formation of periodontal pockets. hBDs are components of an innate mucosal defense against pathogenic microbes. Our results suggest that P. gingivalis trypsin-like proteinase can degrade hBD and thus reduce the innate immune response. Elevated levels and the increased activity of MMPs have been detected in several pathological tissue-destructive conditions where MMPs are shown to cleave extracellular matrix (ECM) and basement membrane (BM) molecules and to facilitate tissue destruction. Elevated levels of MMP-8 have been reported in many inflammatory diseases. In periodontitis, MMP-8 levels in gingival crevicular fluid (GCF) and in peri-implant sulcular fluid (PISF) are elevated at sites of active inflammation, and the increased levels of MMP-8 are mainly responsible for collagenase activity, which leads to tissue destruction. MMP-25, expressed by neutrophils, is involved in inflammatory diseases and in ECM turnover. MMP-26 can degrade ECM components and serve as an activator of other MMP enzymes. We further confirmed that increased levels and activation of MMP-8, -25, and -26 in GCF, PISF, and inflamed gingival tissue are associated with the severity of periodontal/peri-implant inflammation. We evaluated the role of MMP-8 in P. gingivalis-induced periodontitis by comparing MMP-8 knock-out (MMP8-/-) and wild-type mice. Surprisingly, MMP-8 significantly attenuated P. gingivalis-induced site-specific alveolar bone loss. We also evaluated systemic changes in serum immunoglobulin and lipoprotein profiles among these mouse groups. P. gingivalis infection increased HDL/VLDL particle size in the MMP-8-/- mice, which is an indicator of lipoprotein responses during systemic inflammation. Serum total LPS and IgG antibody levels were enhanced in both mice groups. P. gingivalis-induced periodontitis, especially in MMP-8-/- mice, is associated with severe alveolar bone loss and with systemic inflammatory and lipoprotein changes that are likely to be involved in early atherosclerosis.

Identification of collagenolytic MMP networks as potential biomarkers in progressive chronic periodontitis subjects and MMP-8 null allele model

Chronic periodontitis results from a complex aetiology, including the formation of a subgingival biofilm and the elicitation of the host s immune and inflammatory response. The hallmark of chronic periodontitis is alveolar bone loss and soft periodontal tissue destruction. Evidence supports that periodontitis progresses in dynamic states of exacerbation and remission or quiescence. The major clinical approach to identify disease progression is the tolerance method, based on sequential probing. Collagen degradation is one of the key events in periodontal destructive lesions. Matrix metalloproteinase (MMP)-8 and MMP-13 are the primary collagenolytic MMPs that are associated with the severity of periodontal inflammation and disease, either by a direct breakdown of the collagenised matrix or by the processing of non-matrix bioactive substrates. Despite the numerous host mediators that have been proposed as potential biomarkers for chronic periodontitis, they reflect inflammation rather than the loss of periodontal attachment. The aim of the present study was to determine the key molecular MMP-8 and -13 interactions in gingival crevicular fluid (GCF) and gingival tissue from progressive periodontitis lesions and MMP-8 null allele mouse model. In study (I), GCF and gingival biopsies from active and inactive sites of chronic periodontitis patients, which were determined clinically by the tolerance method, and healthy GCF were analysed for MMP-13 and tissue inhibitor of matrix metalloproteinases (TIMP)-1. Chronic periodontitis was characterised by increased MMP-13 levels and the active sites showed a tendency of decreased TIMP-1 levels associated with increments of MMP-13 and total protein concentration compared to inactive sites. In study (II), we investigated whether MMP-13 activity was associated with TIMP-1, bone collagen breakdown through ICTP levels, as well as the activation rate of MMP-9 in destructive lesions. The active sites demonstrated increased GCF ICTP levels as well as lowered TIMP-1 detection along with elevated MMP-13 activity. MMP-9 activation rate was enhanced by MMP-13 in diseased gingival tissue. In study (III), we analysed the potential association between the levels, molecular forms, isoenzyme distribution and degree of activation of MMP-8, MMP-14, MPO and the inhibitor TIMP-1 in GCF from periodontitis progressive patients at baseline and after periodontal therapy. A positive correlation was found for MPO/MMP-8 and their levels associated with progression episodes and treatment response. Because MMP-8 is activated by hypochlorous acid in vitro, our results suggested an interaction between the MPO oxidative pathway and MMP-8 activation in GCF. Finally, in study (IV), on the basis of the previous finding that MMP-8-deficient mice showed impaired neutrophil responses and severe alveolar bone loss, we aimed to characterise the detection patterns of LIX/CXCL5, SDF-1/CXCL12 and RANKL in P. gingivalis-induced experimental periodontitis and in the MMP-8-/- murine model. The detection of neutrophil-chemoattractant LIX/CXCL5 was restricted to the oral-periodontal interface and its levels were reduced in infected MMP-8 null mice vs. wild type mice, whereas the detection of SDF-1/CXCL12 and RANKL in periodontal tissues increased in experimentally-induced periodontitis, irrespectively from the genotype. Accordingly, MMP-8 might regulate LIX/CXCL5 levels by undetermined mechanisms, and SDF-1/CXCL12 and RANKL might promote the development and/or progression of periodontitis.

O uso de células-tronco na regeneração dos tecidos dentários e periodonto

Os estudos abordando a regeneração dos tecidos dentários ganharam uma nova perspectiva com a utilização das células-tronco. E novas perspectivas têm surgido com a bioengenharia tecidual e as terapias periodontais e pulpares regeneradoras. O objetivo deste trabalho foi desenvolver o modelo experimental de autotransplante em ratos visando compará-lo à técnica de reimplante e estudar a capacidade terapêutica das células da medula óssea em diferentes biomateriais utilizados como matriz para a terapia de células-tronco no reparo dos tecidos dentais. Foram utilizados 23 ratos Wistar divididos em grupos de 1, 3, 15 e 60 dias para as técnicas de reimplante e autotransplante. Os grupos com injeção de células-tronco (CT) foram: (1) grupo de 3 dias, combinado à técnica de reimplante; (2) grupo de 15 dias com ambas as técnicas. Blocos contendo os três dentes molares superiores de cada lado dos ratos foram removidos, feitas radiografias periapicais e as peças foram processadas para inclusão em parafina. Foram avaliadas a espessura do ligamento periodontal (LPD) comparada entre os diferentes grupos e a morfologia celular e matriz extracelular relacionadas à superfície radicular, ao osso alveolar e à porção média do LPD, além das células da polpa dental de cada grupo. As células isoladas a partir da medula-óssea foram incubadas por 24h, 48h, e 72h em placas de cultura contendo membranas de colágeno bovino tipo I - CollaTape (Integra LifeSciences Corporation, Plainsboro, NJ, USA), enxerto ósseo - Extra Graft XG-13 (Silvestre Labs Quimica e Farmaceutica LTDA, RJ, Brazil) ou um dente molar de rato. Os espécimes foram observados em um microscópio invertido para contagem de células e processadas para observação no microscópio eletrônico de varredura (MEV). Os grupos de 1 e 3 dias apresentaram medidas de LPD significativamente maiores para a técnica de autotransplante quando comparadas ao reimplante. O grupo de 3 dias com CT não apresentou alterações pulpares significativas, diferente do controle (sem CT) O grupo de 15 dias com CT apresentou as mesmas características histológicas do grupo sem injeção de CT. A observação ao MEV dos biomateriais revelou que as células apresentaram pouca adesão e proliferação no enxerto ósseo e no cemento dentário quando comparados à membrana colágena. A técnica de reimplante associada à injeção de células-tronco sugere alguma influência da terapia com as células-tronco sobre a polpa. As distâncias aumentadas no LPD com a técnica de autotransplante podem não influenciar tanto o sucesso da técnica. As células mesenquimais da medula óssea possuem grande potencial para colonizarem a membrana colágena CollaTape que mostrou vantagens sobre o enxerto ósseo Extra Graft XG-13 como biomaterial para a aderência e a proliferação de células mononucleares da medula óssea, permitindo a diferenciação destas células.

Avaliação tridimensional da sínfise mandibular em crânios secos e sua associação com diferentes classificações de tipos faciais

O objetivo deste trabalho foi desenvolver um estudo morfológico quantitativo e qualitativo da região da sínfise mandibular (SM), através da construção de modelos tridimensionais (3D) e avaliar o seu grau de associação com diferentes classificações de padrões faciais. Foram avaliados 61 crânios secos humanos de adultos jovens com oclusão normal, com idade entre 18 e 45 anos e dentadura completa. Tomografias computadorizadas de feixe cônico (TCFC) de todos os crânios foram obtidas de forma padronizada. O padrão facial foi determinado por método antropométrico e cefalométrico. Utilizando o critério antropométrico, tomando como referência o índice facial (IF), o padrão facial foi classificado em: euriprósopo (≤84,9), mesoprósopo (85,0 - 89,9) e leptoprósopo (≥90,0). Pelo critério cefalométrico, o plano mandibular (FMA) determinou o padrão facial em curto (≤21,0), médio (21,1 - 29,0) e longo (≥29,1); e o índice de altura facial (IAF) classificou a face em hipodivergente (≥0,750), normal (0,749 - 0,650) e hiperdivergente (≤0,649). A construção de modelos 3D, representativos da região da SM, foi realizada com o auxílio do software ITK-SNAP. Os dentes presentes nesta região, incisivos, caninos e pré-molares inferiores, foram separados do modelo por técnica de segmentação semi-automática, seguida de refinamento manual. Em seguida, foram obtidos modelos 3D somente com o tecido ósseo, possibilitando a mensuraçãodo volume ósseo em mm3 (VOL) e da densidade radiográfica, pela média de intensidade dos voxels (Mvox). No programa Geomagic Studio 10 foi feita uma superposição anatômica dos modelos 3D em bestfit para estabelecer um plano de corte padronizado na linha média. Para cada sínfise foi medida a altura (Alt), a largura (Larg) e calculado o índice de proporção entre altura e largura (PAL). A avaliação da presença de defeitos alveolares foi feita diretamente na mandíbula,obtendo-se a média de todas as alturas ósseas alveolares (AltOss) e a média da dimensão das deiscências presentes (Medef). O índice de correlação intra-classe (ICC) com valores entre 0,923 a 0,994,indicou alta reprodutibilidade e confiabilidade das variáveis medidas. As diferenças entre os grupos, determinados pelas classificações do padrão facial (IF, FMA e IAF), foram avaliadas através da análise de variância (oneway ANOVA) seguida do teste post-hoc de Tukey. O grau de associação entre o padrão facial e as variáveis Vol, Mvox, PAL, Alt, Larg, AltOss e Medef foi avaliado pelo coeficiente de correlação de Pearson com um teste t para r. Os resultados indicaram ausência de diferença ou associação entre o volume, densidade radiográfica e presença de defeitos alveolares da SM e o padrão facial quando determinado pelo IF, FMA e IAF. Verificou-se tendência de SM mais longas nos indivíduos com face alongada, porém a largura não mostrou associação com o padrão facial. Estes resultados sugerem que as classificações utilizadas para determinar o padrão facial não representam satisfatoriamente o caráter 3D da face humana e não estão associadas com a morfologia da SM.

Prevalência do polimorfismo -1031 T>C do gene TNFA em um grupo de diabéticos tipo I e sua relação com a periodontite severa

Diabetes mellitus e doenças periodontais são altamente prevalentes na população mundial. Doenças periodontais (DPs) compreendem um grupo de condições crônicas inflamatórias induzidas por microorganismos que levam à inflamação gengival, à destruição tecidual periodontal e à perda óssea alveolar. Diabetes mellitus (DM) é o termo utilizado para descrever um grupo de desordens metabólicas associadas à intolerância à glicose e ao metabolismo inadequado de carboidratos. Uma vez que DPs poderiam agir de forma similar a outros estados infecciosos sistêmicos, aumentando a severidade do diabetes, uma possível relação entre ambas tem sido considerada em todo o mundo. Polimorfismos genéticos de um único nucleotídeo (SNPs) têm sido estudados em diversas doenças. Nas periodontites, acredita-se que possam estar envolvidos na exacerbação da resposta inflamatória frente ao desafio bacteriano, modificando a susceptibilidade do hospedeiro. Neste estudo, a prevalência de periodontite foi avaliada em portadores de diabetes mellitus tipo I. Posteriormente, o SNP localizado na região promotora do gene TNFA (-1031T>C) foi analisado e sua importância para a doença periodontal destrutiva foi avaliada. O grupo teste foi constituído por diabéticos tipo I (DGT, n=113) enquanto o grupo controle por indivíduos não diabéticos (ND, n=73). Para as análises dos polimorfismos genéticos, um subgrupo foi retirado do grupo teste (DG, n=58) e comparado ao grupo ND. Os seguintes parâmetros clínicos e demográficos foram avaliados: percentual de sítios com profundidade de bolsa  6,0 mm (%PBS6,0 mm); índice gengival (IG); perda óssea radiográfica (POR); fumo; duração do diabetes ; idade; índice de massa corpórea (IMC), n de internações e n de dentes presentes. Amostras de sangue e/ou esfregaço bucal foram colhidas de 58 pacientes do grupo teste e de 73 controles. Após a extração do DNA genômico e amplificação da região genômica de interesse por PCR (Polymerase Chain Reaction), o polimorfismo TNFA 1031T>C foi analisado por BbsI RFLP (Restriction Fragment Length Polymorphism). A análise dos produtos de digestão foi feita por eletroforese em gel de poliacrilamida 8%. A análise estatística das freqüências alélica e genotípica juntamente com os dados clínicos e epidemiológicos entre os 2 grupos foi feita através do teste do Mann-Whitney e do Qui-quadrado. Os grupos de estudo obedecem ao princípio de Hardy-Weinberg. No grupo ND, as seguintes freqüências genotípicas foram encontradas: 78,1% (T/T); 20,5% (T/C) e 1,4% (C/C) enquanto no grupo D foram: 42,4%(T/T); 37,3% (T/C) e 20,3% (C/C). A frequência do alelo T no grupo diabético (D) foi de 0,610 ao passo que no grupo ND foi de 0,883. Não foi possível encontrar uma relação entre o polimorfismo -1031 T>C do gene TNFA e a presença de periodontite em diabéticos tipo I. Entretanto, o polimorfismo estudado se mostrou significativamente relacionado (p<0,0001 e OR= 4.85 95%IC 2,271-10,338) à presença do diabetes tipo I.

Síndrome de Kelly

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Medicina Dentária

Elevação do seio maxilar versus implantes zigomáticos

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Medicina Dentária

Effect of the crown design and interface lute parameters on the stress-state of a machined crown-tooth system: A finite element analysis

The effect of preparation design and the physical properties of the interface lute on the restored machined ceramic crown-tooth complex are poorly understood. The aim of this work was to determine, by means of three-dimensional finite element analysis (3D FEA) the effect of the tooth preparation design and the elastic modulus of the cement on the stress state of the cemented machined ceramic crown-tooth complex. The three-dimensional structure of human premolar teeth, restored with adhesively cemented machined ceramic crowns, was digitized with a micro-CT scanner. An accurate, high resolution, digital replica model of a restored tooth was created. Two preparation designs, with different occlusal morphologies, were modeled with cements of 3 different elastic moduli. Interactive medical image processing software (mimics and professional CAD modeling software) was used to create sophisticated digital models that included the supporting structures; periodontal ligament and alveolar bone. The generated models were imported into an FEA software program (hypermesh version 10.0, Altair Engineering Inc.) with all degrees of freedom constrained at the outer surface of the supporting cortical bone of the crown-tooth complex. Five different elastic moduli values were given to the adhesive cement interface 1.8 GPa, 4 GPa, 8 GPa, 18.3 GPa and 40 GPa; the four lower values are representative of currently used cementing lutes and 40 GPa is set as an extreme high value. The stress distribution under simulated applied loads was determined. The preparation design demonstrated an effect on the stress state of the restored tooth system. The cement elastic modulus affected the stress state in the cement and dentin structures but not in the crown, the pulp, the periodontal ligament or the cancellous and cortical bone. The results of this study suggest that both the choice of the preparation design and the cement elastic modulus can affect the stress state within the restored crown-tooth complex.