Clonal growth and demography of a hemicryptophyte alpine plant: Leontopodium alpinum Cassini

Clonally reproducing hemicryptophytic rosette plants are common in the alpine belt. However, their demography, and indirectly their growth and reproductive strategy in these harsh conditions, was rarely studied. We analysed the morphology, clonal reproduction and demography of one such species, Leontopodium alpinum, in two populations of the Swiss Alps. The species forms small colonies of 1-5 (maximum 30) sterile rosettes with a few flowering stalks. After flowering, the apical meristem dies and one or two new axillary buds grow below the previous rosette in the following year, developing into short rhizomes (<2 cm), which decay after four years. The new stalk produces sterile rosettes before flowering after two to four years, depending on climatic conditions. The apical meristem often dies during the sterile stage, and is replaced by a new axillary bud. Levkovitch matrices on two stages (sterile and flowering rosettes) showed that rosette survival and clonal reproduction maintain long-lived populations (λ = 0.96). Elasticities indicated that a change in the survival of sterile rosettes had the strongest effect on population dynamics, and this stage lasts, on average, 6.8 years at 2480 m. Altogether, L. alpinum is following Tomlinson's architectural model. This growth form appears perfectly adapted to harsh alpine conditions: the clonal ramification ensures longevity to genets and the semelparous behaviour of the rosettes allows an efficient flowering, whatever the climatic conditions. L. alpinum appears to follow a common growth model among rosette possessing hemicryptophytes in the alpine belt.

Climate and human forcing of Alpine river flow

River flow in Alpine environments is likely to be highly sensitive to climate change because of the effects of warming upon snow and ice, and hence the intra-annual distribution of river runoff. It is also likely to be influenced strongly by human impacts both upon hydrology (e.g. flow abstraction) and river regulation. This paper compares the river flow and sediment flux of two Alpine drainage basins over the last 5 to 7 decades, one that is largely unimpacted by human activities, one strongly impacted by flow abstraction for hydroelectricity. The analysis shows that both river flow and sediment transport capacity are strongly dependent upon the effects of temperature and precipitation availability upon snow accumulation. As the latter tends to increase annual maximum flows, and given the non-linear form of most sediment transport laws, current warming trends may lead to increased sedimentation in Alpine rivers. However, extension to a system impacted upon by flow abstraction reveals the dominant effect that human activity can have upon river sedimentation but also how human response to sediment management has co-evolved with climate forcing to make disentangling the two very difficult.

Strategisten reaalioptioiden mallintaminen Monte Carlo -simulointimenetelmällä, case Voest Alpine Stahl Ag

Tutkielman päätavoitteena oli selvittää, miten Monte Carlo –simulointi soveltuu strategisten reaalioptioiden arvonmääritykseen. Tutkielman teoriaosuudessa käytiin läpi reaalioptioteoriaa ja Monte Carlo –simulointimenetelmää toiminta-analyyttisella tutkimusotteella. Tuloksena todettiin, että simulointimenetelmää on reaalioptioiden yhteydessä yleensä käytetty, kun muu menetelmä ei ole ollut mahdollinen. Tutkielman pääpaino on tapaustutkimukseen pohjautuvassa empiriaosuudessa, jossa rakennettiin päätöksentekometodologista tutkimusotetta seuraten simulointimalli, jolla tutkittiin Voest Alpine Stahl Ag:n vaihtoehtoisten hinnoittelustrategioiden taloudellista vaikutusta. Mallin rakentaminen perustui yrityksen tilinpäätösaineistoon. Havaittiin, ettei yritys ole valitsemansa strategian vuoksi juurikaan menettänyt tuottoja, mutta toisaalta pelkkä tilinpäätösaineisto ei riitä kovin luotettavaan tarkasteluun. Vuosikertomusten antaman tiedon pohjalta analysoitiin lisäksi yrityksen toiminnassa havaittuja reaalioptioita. Monte Carlo –simulointimenetelmä sopii reaalioptioiden arvonmääritykseen, mutta kriittisiä tekijöitä ovat mallin rakentaminen ja lähtötietojen oikeellisuus. Numeerisen mallin rinnalla on siksi aiheellista suorittaa myös laadullista reaalioptioanalyysia.

Lidar measurement of surface melt for a temperate Alpine glacier at the seasonal and hourly scales

This study shows how a new generation of terrestrial laser scanners can be used to investigate glacier surface ablation and other elements of glacial hydrodynamics at exceptionally high spatial and temporal resolution. The study area is an Alpine valley glacier, Haut Glacier d'Arolla, Switzerland. Here we use an ultra-long-range lidar RIEGL VZ-6000 scanner, having a laser specifically designed for measurement of snow- and ice-cover surfaces. We focus on two timescales: seasonal and daily. Our results show that a near-infrared scanning laser system can provide high-precision elevation change and ablation data from long ranges, and over relatively large sections of the glacier surface. We use it to quantify spatial variations in the patterns of surface melt at the seasonal scale, as controlled by both aspect and differential debris cover. At the daily scale, we quantify the effects of ogive-related differences in ice surface debris content on spatial patterns of ablation. Daily scale measurements point to possible hydraulic jacking of the glacier associated with short-term water pressure rises. This latter demonstration shows that this type of lidar may be used to address subglacial hydrologic questions, in addition to motion and ablation measurements.

Ecosystem impacts of Alpine water intakes for hydropower: the challenge of sediment management

The natural flow hydrological characteristics (such as the magnitude, frequency, duration, timing, and rate of change of discharge) of Alpine streams, dominated by snowmelt and glacier melt, have been established for many years. More recently, the ecosystems that they sustain have been described and explained. However, natural Alpine flow regimes may be strongly modified by hydroelectric power production, which impacts upon both river discharge and sediment transfer, and hence on downstream flora and fauna. The impacts of barrages or dams have been well studied. However, there is a second type of flow regulation, associated with flow abstraction at intakes where the water is transferred laterally, either to another valley for storage, or at altitude within the same valley for eventual release downstream. Like barrages, such intakes also trap sediment, but because they are much smaller, they fill more frequently and so need to be flushed regularly. Downstream, while the flow regime is substantially modified, the delivery of sediment (notably coarser fractions) remains. The ecosystem impacts of such systems have been rarely considered. Through reviewing the state of our knowledge of Alpine ecosystems, we outline the key research questions that will need to be addressed in order to modify intake management so as to reduce downstream ecological impacts. Simply redesigning river flows to address sediment management will be ineffective because such redesign cannot restore a natural sediment regime and other approaches are likely to be required if stream ecology in such systems is to be improved.

Geospatial approach for defining the Wildland-Urban Interface in the Alpine environment

Problems related to fire hazard and fire management have become in recent decades one of the most relevant issues in the Wildland-Urban Interface (WUI), that is the area where human infrastructures meet or intermingle with natural vegetation. In this paper we develop a robust geospatial method for defining and mapping the WUI in the Alpine environment, where most interactions between infrastructures and wildland vegetation concern the fire ignition through human activities, whereas no significant threats exist for infrastructures due to contact with burning vegetation. We used the three Alpine Swiss cantons of Ticino, Valais and Grisons as the study area. The features representing anthropogenic infrastructures (urban or infrastructural components of the WUI) as well as forest cover related features (wildland component of the WUI) were selected from the Swiss Topographic Landscape Model (TLM3D). Georeferenced forest fire occurrences derived from the WSL Swissfire database were used to define suitable WUI interface distances. The Random Forest algorithm was applied to estimate the importance of predictor variables to fire ignition occurrence. This revealed that buildings and drivable roads are the most relevant anthropogenic components with respect to fire ignition. We consequently defined the combination of drivable roads and easily accessible (i.e. 100 m from the next drivable road) buildings as the WUI-relevant infrastructural component. For the definition of the interface (buffer) distance between WUI infrastructural and wildland components, we computed the empirical cumulative distribution functions (ECDF) of the percentage of ignition points (observed and simulated) arising at increasing distances from the selected infrastructures. The ECDF facilitates the calculation of both the distance at which a given percentage of ignition points occurred and, in turn, the amount of forest area covered at a given distance. Finally, we developed a GIS ModelBuilder routine to map the WUI for the selected buffer distance. The approach was found to be reproducible, robust (based on statistical analyses for evaluating parameters) and flexible (buffer distances depending on the targeted final area covered) so that fire managers may use it to detect WUI according to their specific priorities.

Combining niche modelling and landscape genetics to study local adaptation: A novel approach illustrated using alpine plants

Understanding the factors that shape adaptive genetic variation across species niches has become of paramount importance in evolutionary ecology, especially to understand how adaptation to changing climate affects the geographic range of species. The distribution of adaptive alleles in the ecological niche is determined by the emergence of novel mutations, their fitness consequences and gene flow that connects populations across species niches. Striking demographical differences and source sink dynamics of populations between the centre and the margin of the niche can play a major role in the emergence and spread of adaptive alleles. Although some theoretical predictions have long been proposed, the origin and distribution of adaptive alleles within species niches remain untested. In this paper, we propose and discuss a novel empirical approach that combines landscape genetics with species niche modelling, to test whether alleles that confer local adaptation are more likely to occur in either marginal or central populations of species niches. We illustrate this new approach by using a published data set of 21 alpine plant species genotyped with a total of 2483 amplified fragment length polymorphisms (AFLP), distributed over more than 1733 sampling sites across the Alps. Based on the assumption that alleles that were statistically associated with environmental variables were adaptive, we found that adaptive alleles in the margin of a species niche were also present in the niche centre, which suggests that adaptation originates in the niche centre. These findings corroborate models of species range evolution, in which the centre of the niche contributes to the emergence of novel adaptive alleles, which diffuse towards niche margins and facilitate niche and range expansion through subsequent local adaptation. Although these results need to be confirmed via fitness measurements in natural populations and functionally characterised genetic sequences, this study provides a first step towards understanding how adaptive genetic variation emerges and shapes species niches and geographic ranges along environmental gradients.

Distribution and population genetic variation of cryptic species of the Alpine mayfly Baetis alpinus (Ephemeroptera: Baetidae) in the Central Alps.

BACKGROUND: Many species contain evolutionarily distinct groups that are genetically highly differentiated but morphologically difficult to distinguish (i.e., cryptic species). The presence of cryptic species poses significant challenges for the accurate assessment of biodiversity and, if unrecognized, may lead to erroneous inferences in many fields of biological research and conservation. RESULTS: We tested for cryptic genetic variation within the broadly distributed alpine mayfly Baetis alpinus across several major European drainages in the central Alps. Bayesian clustering and multivariate analyses of nuclear microsatellite loci, combined with phylogenetic analyses of mitochondrial DNA, were used to assess population genetic structure and diversity. We identified two genetically highly differentiated lineages (A and B) that had no obvious differences in regional distribution patterns, and occurred in local sympatry. Furthermore, the two lineages differed in relative abundance, overall levels of genetic diversity as well as patterns of population structure: lineage A was abundant, widely distributed and had a higher level of genetic variation, whereas lineage B was less abundant, more prevalent in spring-fed tributaries than glacier-fed streams and restricted to high elevations. Subsequent morphological analyses revealed that traits previously acknowledged as intraspecific variation of B. alpinus in fact segregated these two lineages. CONCLUSIONS: Taken together, our findings indicate that even common and apparently ecologically well-studied species may consist of reproductively isolated units, with distinct evolutionary histories and likely different ecology and evolutionary potential. These findings emphasize the need to investigate hidden diversity even in well-known species to allow for appropriate assessment of biological diversity and conservation measures.