A well-to-wheel analysis of electric vehicles in the all-island Single Electricity Market

The European Union has set a target for 10% renewable energy in transport by 2020 to be met using biofuels and electric vehicles. In the case of biofuels, the biofuel must achieve greenhouse gas savings of 35% relative to the fossil fuel replaced. For biofuels, greenhouse gas savings can be calculated using life cycle analysis or the European Union default values. In contrast, all electricity used in transport is considered to be the same, regardless of the source or the type of electric vehicle. However, the choice of the electric vehicle and electricity source will have a major impact on the greenhouse gas saving. In this paper the initial findings of a well-to-wheel analysis of electric vehicle deployment in Northern Ireland are presented. The key finding indicates that electric vehicles require least amount of energy per mile on a well-to-wheel basis, consume the fewest resources, even accommodating inefficient fuel production, in comparison to standard internal combustion engine and hybrid vehicles.

The regulation of adult hippocampal neurogenesis by wheel running and environmental enrichment

Introduction: Chez les mammifères, la naissance de nouveaux neurones se poursuit à l’âge adulte dans deux régions du cerveau: 1) l’hippocampe et 2) la zone sous-ventriculaire du prosencéphale. La neurogenèse adulte n’est pas un processus stable et peut être affectée par divers facteurs tels que l’âge et la maladie. De plus, les modifications de la neurogenèse peuvent être à l’origine des maladies de sorte que la régulation ainsi que le rétablissement de la neurogenèse adulte doivent être considérés comme d’importants objectifs thérapeutiques. Chez la souris saine ou malade, la neurogenèse hippocampale peut être fortement régulée par l’enrichissement environnemental ainsi que par l’activité physique. Cependant, lors même que l’activité physique et l’enrichissement environnemental pourraient contribuer au traitement de certaines maladies, très peu d’études porte sur les mécanismes moléculaires et physiologiques responsables des changements qui sont en lien avec ces stimuli. Objectifs et hypothèses: Les principaux objectifs de cette étude sont de caractériser les effets de stimuli externes sur la neurogenèse et, par le fait même, d’élucider les mécanismes sous-jacents aux changements observés. En utilisant le modèle d’activité physique volontaire sur roue, cette étude teste les deux hypothèses suivantes: tout d’abord 1) qu’une période prolongée d’activité physique peut influencer la neurogenèse adulte dans le prosencéphale et l’hippocampe, et 2) que l’activité volontaire sur roue peut favoriser la neurogenèse à travers des stimuli dépendants ou indépendants de la course. Méthodes: Afin de valider la première hypothèse, nous avons utilisé un paradigme incluant une activité physique volontaire prolongée sur une durée de six semaines, ainsi que des analyses immunohistochimiques permettant de caractériser l’activité de précurseurs neuronaux dans la zone sous-ventriculaire et l’hippocampe. Ensuite, pour valider la seconde hypothèse, nous avons utlisé une version modifiée du paradigme ci-dessous, en plaçant les animaux (souris) soit dans des cages traditionnelles, soit dans des cages munies d’une roue bloquée soit dans des cages munies d’une roue fonctionnelle. Résultats: En accord avec la première hypothèse, l’activité physique prolongée volontaire a augmenté la prolifération des précurseurs neuronaux ainsi que la neurogenèse dans le gyrus dentelé de l’hippocampe comparativement aux animaux témoins, confirmant les résultats d’études antérieures. Par ailleurs, dans ce paradigme, nous avons aussi observé de la prolifération acrue au sein de la zone sous-ventriculaire du prosencéphale. De plus, en accord avec la seconde hypothèse, les souris placées dans une cage à roue bloquée ont montré une augmentation de la prolifération des précurseurs neuronaux dans l’hippocampe comparable à celle observée chez les souris ayant accès à une roue fonctionnelle (coureurs). Cependant, seuls les animaux coureurs ont présenté une augmentation de la neurogenèse hippocampale. Conclusions: Ces résultats nous ont permis de tirer deux conclusions nouvelles concernant les effets de l’activité physique (course) sur la neurogenèse. Premièrement, en plus de la prolifération et de la neurogenèse dans le gyrus dentelé de l’hippocampe, la prolifération dans la zone sous-ventriculaire du prosencéphale peut être augmentée par l’activité physique sur roue. Deuxièmement, l’environnement dans lequel l’activité physique a lieu contient différents stimuli qui peuvent influencer certains aspects de la neurogenèse hippocampale en l’absence d’activité physique sur roue (course).

Detection of neural correlates of self-paced motor activity using empirical mode decomposition phase locking analysis

Transient episodes of synchronisation of neuronal activity in particular frequency ranges are thought to underlie cognition. Empirical mode decomposition phase locking (EMDPL) analysis is a method for determining the frequency and timing of phase synchrony that is adaptive to intrinsic oscillations within data, alleviating the need for arbitrary bandpass filter cut-off selection. It is extended here to address the choice of reference electrode and removal of spurious synchrony resulting from volume conduction. Spline Laplacian transformation and independent component analysis (ICA) are performed as pre-processing steps, and preservation of phase synchrony between synthetic signals. combined using a simple forward model, is demonstrated. The method is contrasted with use of bandpass filtering following the same preprocessing steps, and filter cut-offs are shown to influence synchrony detection markedly. Furthermore, an approach to the assessment of multiple EEG trials using the method is introduced, and the assessment of statistical significance of phase locking episodes is extended to render it adaptive to local phase synchrony levels. EMDPL is validated in the analysis of real EEG data, during finger tapping. The time course of event-related (de)synchronisation (ERD/ERS) is shown to differ from that of longer range phase locking episodes, implying different roles for these different types of synchronisation. It is suggested that the increase in phase locking which occurs just prior to movement, coinciding with a reduction in power (or ERD) may result from selection of the neural assembly relevant to the particular movement. (C) 2009 Elsevier B.V. All rights reserved.

Role of the atmosphere in the seasonal phase locking of El Nino

The variations with the seasonal cycle of the atmospheric response to constant SST anomalies in the eastern tropical Pacific are investigated with the atmospheric GCM, HadAM3. The equatorial wind response is weakest in January and February when the warmest SSTs are south of the Equator and strongest in April when the warmest SSTs are on the Equator. This may have consequences for the seasonality of the onset and termination of El Niño. Westerly wind anomalies in the tropical Pacific associated with El Niño have previously been observed to shift south of the Equator, weakening on the Equator, during the northern winter. It has been suggested that this may contribute to the termination of El Niño in spring. These experiments demonstrate that such a shift can arise solely in response to the mean seasonal cycle during El Niño and does not require changes in SST anomalies.

Locking-in carbon, locking-out livelihoods? ASM and REDD in Sub-Saharan Africa

This paper examines the potential mutual conflict between interventions aimed at formalising artisanal and small-scale mining (ASM) on the one hand, and policies implemented in response to the Reducing Emissions from Deforestation and Forest Degradation (REDD) initiative on the other. Deforestation caused by ASM undermines sound forest management, and potentially threatens the implementation of REDD. Conversely, the adoption of REDD could further marginalise and criminalise the ASM sector, reducing its contribution to poverty alleviation. Reviewing a series of commonalities between ASM and forest management highlights many difficulties facing policy-makers. Potentially, contradictory outcomes of evolving governance arrangements means novel cross-sectoral institutions will be required in order to realise the full potential of REDD and ASM to address poverty reduction in a complementary fashion. The analysis reiterates the centrality of livelihoods to REDD and the need for policies to take into account local contexts.

Circadian Pattern of Wheel-Running Activity of a South American Subterranean Rodent (Ctenomys cf knightii)

Circadian rhythms are regarded as essentially ubiquitous features of animal behavior and are thought to confer important adaptive advantages. However, although circadian systems of rodents have been among the most extensively studied, most comparative biology is restricted to a few related species. In this study, the circadian organization of locomotor activity was studied in the subterranean, solitary north Argentinean rodent, Ctenomys knightii. The genus, Ctenomys, commonly known as Tuco-tucos, comprises more than 50 known species over a range that extends from 12S latitude into Patagonia, and includes at least one social species. The genus, therefore, is ideal for comparative and ecological studies of circadian rhythms. Ctenomys knightii is the first of these to be studied for its circadian behavior. All animals were wild caught but adapted quickly to laboratory conditions, with clear and precise activity-rest rhythms in a light-dark (LD) cycle and strongly nocturnal wheel running behavior. In constant dark (DD), the rhythm expression persisted with free-running periods always longer than 24h. Upon reinstatement of the LD cycle, rhythms resynchronized rapidly with large phase advances in 7/8 animals. In constant light (LL), six animals had free-running periods shorter than in DD, and 4/8 showed evidence of splitting. We conclude that under laboratory conditions, in wheel-running cages, this species shows a clear nocturnal rhythmic organization controlled by an endogenous circadian oscillator that is entrained to 24h LD cycles, predominantly by light-induced advances, and shows the same interindividual variable responses to constant light as reported in other non-subterranean species. These data are the first step toward understanding the chronobiology of the largest genus of subterranean rodents.

Improving minimum quantity lubrication in CBN grinding using compressed air wheel cleaning

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of the grinding wheel's dive speed on the damage of rectified hardened steels

The world tendency is the increase of the productivity and the production of pieces more and more sophisticated, with high degree of geometric and dimensional tolerances, with good surface finish and low cost. Rectification is responsible for the final finish in the machining process of a material. However, damages generated in this production phase affect all the resources used in the previous processes. Great part of the problems happennig in the rectification process is due to the enormous temperature generated in this activity because of the machining conditions. The dive speed, which is directly related to the productivity, is considered responsible for the damages that occur during rectification, limiting its values to those that do not cause such damages. In this work, through the variation of the dive speed in the process of cylindrical grinding of type ABNT D6 steel, rationalizing the application of two cutting fluids and using a CBN (cubic boron nitrate) abrasive wheel with vitrified blond, the influence of the dive speed on the surface damages of hardened steels was evaluated. The results allowed to say that the dive speed, associated to an efficient cooling and lubrication, didn't provoke thermal damages (including heated zones, cracks and tension stresses) to the material. Residual stresses and the roughness of rectified materials presented a correlation with the machining conditions. The work concluded that it is possible to increase the productivity without provoking damages in the rectified components.

In vitro evaluation of conventional and locking miniplate/screw systems for the treatment of mandibular angle fractures

This in vitro study evaluated the influence of the type of miniplate and the number of screws installed in the proximal and distal segments on the stability and resistance of Champy's osteosynthesis in mandibular angle fractures. Sixty polyurethane hemimandibles with bone-like consistency were randomly assigned to four groups (n = 15) and sectioned in the mandibular angle region to simulate fracture. The bone segments were fixed by different osteosynthesis methods using 2.0 mm miniplates and 2.0 mm x 6 mm rnonocortical screws. In groups 1 and 2, two conventional (G1) or locking (G2) screws were installed in each bone segment using a conventional (G1) or a locking (02) straight miniplate; in groups 3 and 4, three conventional (03) or locking (04) screws were installed in the proximal segment and four conventional (G3) or locking (04) screws were installed in the distal segment using a conventional (G3) or a locking (G4) seven-hole straight miniplate. The hemimandibles were loaded in compressive strength until a 4 mm displacement occurred between the segments, vertically or horizontally. Locking plate/screw systems provided significantly greater resistance to displacement than conventional ones (p < .01). Locking miniplates offered more resistance than conventional miniplates. Long locking miniplates provided greater stability than short ones.

In Vitro Biomechanical Evaluation of the Use of Conventional and Locking Miniplate/Screw Systems for Sagittal Split Ramus Osteotomy

Purpose: The aim of this in vitro study was to assess the biomechanical stability of 9 different osteosynthesis methods after sagittal split ramus osteotomy by simulating the masticatory forces and using a 3-point biomechanical test method.Materials and Methods: Forty-five polyurethane hemimandibles with bone-like consistency were randomly assigned to 9 groups (n = 5) and subjected to sagittal split ramus osteotomy. After 4-mm advancement of the distal segment, the bone segments were fixed by different osteosynthesis methods using 2.0-mm miniplate/screw systems: group A, one 4-hole conventional straight miniplate; group B, one 4-hole locking straight miniplate; group C, one 4-hole conventional miniplate and one bicortical screw; group D, one 4-hole locking miniplate and 1 bicortical screw; group E, one 6-hole conventional straight miniplate; group F, one 6-hole locking straight miniplate; group (3: two 4-hole conventional straight miniplates; group H. two 4-hole locking straight miniplates; and group 1, 3 bicortical screws in an inverted-L. pattern. All models were mounted on a base especially constructed for this purpose. Using a 3-point biomechanical test model, the hemimandibles were loaded in compressive strength in an Instron machine (Norwood, MA) until a 3-mm displacement occurred between segments vertically or horizontally. Data were analyzed by analysis of variance and Tukey test (alpha = 1%).Results: The multiparametric comparison of the groups showed a statistically significant difference (P<.01) between groups that used 2 miniplates (groups G and H), 1 miniplate and 1 bicortical screw (groups C and D), and only bicortical screws (group D compared with groups that used only 1 miniplate with 2 screws per segment (groups A and B) and 3 screws per segment (groups E and F).Conclusion: The placement of 2.0-mm-diameter bicortical screws in the retromolar region, associated or not with conventional and locking miniplates with monocortical screws, promoted a better stabilization of bone segments. Locking miniplates presented a better performance in bone fixation in all groups. (C) 2010 American Association of Oral and Maxillofacial Surgeons J Oral Maxillofac Surg 68:724-730, 2010