Production of Chemicals from Woody Biomass by Wet Oxidation

The production of chemicals from sawdust by wet oxidation has been investigated. Two different concentrations of sawdust; 54054 mg/l and 32683 mg/l were used in the study. The wet oxidation operating conditions were; 175 deg.C – 225 deg.C, 1MPa Oxygen, and 40 minutes to 120 minutes reaction time. Carboxylic acids were among the chemicals produced in the process. The total yield of carboxylic acids was found to increase with temperature. Also, higher yields of carboxylic acids were observed at a lower sawdust concentration. This was probably due to the high oxygen-biomass ratio at lower sawdust concentration. Higher oxygen availability at low sawdust concentration resulted in increased conversion of the sawdust; hence the higher yields of carboxylic acids. At lower sawdust concentration, a total carboxylic acid yield of 25.59 wt% was attained at 200 deg.C and 40 minutes reaction time. At higher sawdust concentration, a total carboxylic acid yield of 15.57 wt% was attained at 200 deg.C and 40-minutes reaction time. The carboxylic acids identified include formic acid, acetic acid, succinic acid and oxalic acid. The optimum temperature for the production of formic acid was found to be 200 deg.C, while the optimum temperature for the production of acetic acid was found to be 225 deg.C. A temperature of 225 deg.C and relatively short reaction time of 10 minutes was found to be the optimal condition for the production of succinic acid. Formic acid was produced in the highest yield, with an optimal yield of 13.69wt %, when the reaction temperature and time are 200 deg.C and 40 minutes respectively. The yield of formic acid was found to decrease significantly when further increasing the temperature to 225 deg.C. This was presumably due to thermal decomposition of formic acid at relatively higher temperature. However, the yield of acetic acid was found to steadily increase with temperature. This is because acetic is more thermally stable than formic acid. The yield of acetic acid did not decrease after the temperature was increased to 225 deg.C. Optimal yield of acetic acid (7.98wt %) was achieved at; 225 deg.C, and 40 minutes reaction time. Succinic acid was produced only at temperatures of 200 deg.C and 225 deg.C. Optimal yield of succinic acid (5.66wt %) was attained under the following conditions; 32683 mg/l, 225 deg.C, 1MPa O2, and 10-minutes reaction time. Oxalic acid was produced in the lowest yield and, less frequently. The optimal yield of oxalic acid (4.02 wt%) was attained at 175 deg.C and 80-minutes of reaction time The Total Organic Carbon (TOC) is found to be higher when increasing the operating temperature, thus suggesting that more organic compounds are formed at higher temperatures. The identified carboxylic acids could only account for less than 30% of the measured COD content of the various wet oxidation samples. This implies that some other unidentified compounds (reaction products) must have been present. In general, wet oxidation seems to be an effective method for converting lignocellulosic biomass into useful chemicals. Relatively higher temperatures have been found to favor the production of carboxylic acids from sawdust.

Effect of different tumbling marination methods and time on the quality characteristics of prepared pork chops

AbstractThe combined effects of tumbling marination methods (Vacuum continuous tumbling marination, CT; Vacuum intermittent tumbling marination, IT) and effective tumbling time (4, 6, 8 and 10 h) on quality characteristics of prepared boneless pork chops were investigated. The results showed that regardless of tumbling time, CT method significantly increased the pH, product yield, cohesiveness, resilience, sensory tenderness and overall flavor (p<0.05) compared with IT method, and CT method also significantly decreased the pressing loss, cooking loss, shear force value (SFV), hardness and chewiness (p<0.05) compared with IT method. With the effective tumbling time increasing from 4 h to 10 h, the product yield and sensory attributes of prepared pork chops increased at first and then decreased, whereas the pressing loss, cooking loss, SFV, hardness and chewiness decreased at first and then increased. Additionally, an interaction between CT method and effective tumbling time was also observed. These results suggested that CT method of 8 h obtained the best quality characteristics of prepared pork chops, which should be adopted.

New aspects in limestone dissolution for wet flue gas desulfurization

Fortsättningsvis tillgodoses största delen av världens energibehov genom förbränning av fossila bränslen, dessutom forsätter världens totala energibehov att öka. Eftersom förbränning av fossila bränslen som t.ex. olja och kol orsakar utsläpp av svaveldioxid som är skadligt för både människa och natur, finns det fortfarande ett akut behov av forskning och utveckling av metoder för svavelrening. De vanligaste teknikerna för svavelrening är våt- och semitorrskrubbning, där svaveldioxiden absorberas av en skrubbervätska. Det är allmänt känt att våtskrubbning är en av de effektivaste teknikerna för svavelrening både ekonomiskt och tekniskt sett samt den mest använda. Våtskrubbningsprocessen har dock flera nackdelar, som dess höga vatten- och energiförbrukning. I större kraftverk går ca 1-3% av dess eleffekt åt till rökgasreningsprocessen, vilket kraftigt motiverar utveckling av nya reningsprocesser samt effektivering av existerande reningsanläggningar. Skrubbervätskan som till huvudsak består av vatten innehåller vanligtvis även kalcium vars syfte är att binda svavlet. Kalciumet kan tillsättas i flera former varav bränd kalk och kalksten är de vanligaste formerna. Kalksten används ofta i svavelreningsprocessen p.g.a. dess låga pris och för att den ger upphov till den användbara biprodukten gips. Kalkstenens upplösningshastighet är en de av faktorer som kraftigast påverkar reningsprocessen. En detaljerad experimentell karakterisering och analys av kalkstenspartiklar i fast form och i vätskeform har utförts i detta arbete. En experimentell metod för att studera kalkstenens upplösningshastighet vid låg till obegränsad massöverföring har även utvecklats i detta arbete. Metoden möjliggör identifieringen av systemoberoende kinetiska parametrar, vilka kan användas för att undersöka reningsprocesser samt för att planera nya reningsanläggningar. Kinetiska modeller utvecklades genom att använda kalkstenpartiklars specifika yta, som mättes genom kväveadsorption. Efter att de kinetiska parametrarna bestämts experimentellt utvecklades en skrubbermodell för att optimera en i driftvarande skrubber. Genom att kombinera experimentellt bestämda modeller med matematisk optimering erhölls en djupare insikt i hur olika råmaterial påverkar processen och hur driftparameterar bör justeras för att minska elförbrukningen.

Vegetational history and geochronology of several sites in South Southwestern Ontario with discussion on mastodon extinction in Southern Ontario /

This study has three purposes: to establish a chronologically controlled vegetational history for a number of sites in south Southwestern Ontario; to utilize the resulting data to support and/or add to the current understanding of Quaternary geology and stratigraphy, and the glacial and postglacial history of the Great Lakes in south Southwestern Ontario; and to attempt to propose a possible explanation for the extinction of the mastodon in Southern Ontario. Palynological and geochronological analyses were conducted on material collected from eleven sites (east to west): Verbeke Mastodon Site, Woloshko Mastodon Site, Walker Pond II, Pond Mills I, Lake Hunger Bog, Bouckaert Site. Mabee Site, Cornell Bog. Colles Lake I, Folden Mastodon Site and Forest Pond. Individual geochronologically controlled (where possible) vegetational histories were reconstructed for each of the sites investigated. The results of the individual studies, when considered in overview. indicated the existance of an established closed boreal forest throughout south Southwestern Ontario by 10,000 years B.P. This evidence for a significant climatic change coincident throughout south Southwestern Ontario supports the proposed age of 10,000 years B.P. for the Pleistocene/Holocene Boundary (Terasmae, 1972). Remnant patches of 'open spruce parkland' persisted in small local 'wet' areas. It was in these areas that the mastodon was restricted during early Holocene time. With continued encroachment by the surrounding boreal forest, possibly speeded up by this browser's destructive feeding habits, the spruce enclaves shrank and the mastodon became extinct in south Southwestern Ontario. The results of this thesis basically support Dreimanis' (1967, 1968) proposed 'Environmental-Climatic' theory for mastodon extinction. It is suggested that increased dryness during the present interglacial compared to the climate of earlier interglacials may be the key to unravelling the problem of mastodon extinction in eastern North America.

Maple Leaf Mills Records 1955, 1960-1964, 1975-1987, 1989, n.d.

Ontario Editorial Bureau (O.E.B.)

Andrew Dean Grist and Flouring Mills - Vignette

A vignette of Grist and Flouring Mills, Clinton, Andrew Dean, Esq., Proprietor.

Lincoln and Welland Canal Mills - Vignette

A vignette of the Lincoln and Welland Canal Mills

J. McDonagh's Saw and Plaining Mills - Vignette

A vignette of J. McDonagh's Saw and Plaining Mills, Welland Canal, Thorold.

Invoice - Thorold Mills April 11th 1851

An Invoice for Mr. W. Cowan form Alex Hutchison, totalling $1000.00. The note at the bottom of the invoice reads "I have nothing to communicate as Mr. Parks is just writing you. Hoping you and your family are all well with respect I am dear Sir, Yours Truly Alex Hutchison"

Letter - Herbert Mills of Jarvis-Conklin Mortgage Trust Company to S.D. Woodruff

Letter (1 page, typed) to S.D. Woodruff which accompanied the Rothrock account papers. Signed by Herbert Mills, assistant treasurer of Jarvis-Conklin Mortgage Trust Company, Oct. 27, 1890.

Interlake Tissue Mills Fire Slides

The Interlake Tissue Mills storage location was at the intersection of Glendale and Merritt Street in Merritton. In the 1850s, the Beaver Cotton Mills (later Merritton Cotton Mills) was built. It was a frame building that burned down in 1881. A sandstone structure replaced the previous building. In 1906, the cotton mill closed and in 1912, the Independent Rubber Company took over the building. The mill was doubled in size. The rubber company remained there for ten years and then the building remained vacant until 1935. Interlake Tissue Mills acquired the building for storage purposes. A fire razed the larger of the plant’s buildings on Memorial Day weekend in 1961. After the fire, Domtar used the smaller building for storage for a short time. This is currently the site of the Keg Restaurant.

Letter on Long Point Company letterhead addressed to W.D. Woodruff of Lincoln Paper Mills

Letter on Long Point Company letterhead addressed to W.D. Woodruff of Lincoln Paper Mills, Merritton, Ontario in which Frank Reid, secretary of Long Point Company encloses a copy of the by-laws and the dates of incorporation, as requested (1 page, typed) [by-laws are not included here], Jan. 18, 1916.

Cross sections of Lyons Creek from Cooks Mills Dam to culvert

Cross sections of Lyons Creek from Cooks Mills Dam to culvert (9 pages of charts, graphs and text, handwritten). This is signed by Fred Holmes, May 1857.

Letter to Mr. W.D. Woodruff of Lincoln Paper Mills, Merritton from P.J. Price of the United Gas Companies

Letter to Mr. W.D. Woodruff of Lincoln Paper Mills, Merritton from P.J. Price of the United Gas Companies, St. Catharines regarding a cheque received from E.J. McIntyre for $200. Included with this letter is an envelope addressed to W.D. Woodruff, Dec. 27, 1910.

Letter to the Estate of W.D. Woodruff from S. Mitchell, secretary of the Lincoln Paper Mills Company

Letter to the Estate of W.D. Woodruff from S. Mitchell, secretary of the Lincoln Paper Mills Company (1 page, printed). This is a notice of the 43rd annual meeting of the shareholders of the Lincoln Paper Mills Company, Limited. This is accompanied by an envelope, Feb. 7, 1921.