The relationship between parents’ self-efficacy beliefs, outcome expectations, child behaviour, and management of atopic dermatitis

Atopic dermatitis (AD) is a chronic inflammatory skin condition, characterized by intense pruritis, with a complex aetiology comprising multiple genetic and environmental factors. It is a common chronic health problem among children, and along with other allergic conditions, is increasing in prevalence within Australia and in many countries worldwide. Successful management of childhood AD poses a significant and ongoing challenge to parents of affected children. Episodic and unpredictable, AD can have profound effects on children’s physical and psychosocial wellbeing and quality of life, and that of their caregivers and families. Where concurrent child behavioural problems and parenting difficulties exist, parents may have particular difficulty achieving adequate and consistent performance of the routine management tasks that promote the child’s health and wellbeing. Despite frequent reports of behaviour problems in children with AD, past research has neglected the importance of child behaviour to parenting confidence and competence with treatment. Parents of children with AD are also at risk of experiencing depression, anxiety, parenting stress, and parenting difficulties. Although these factors have been associated with difficulty in managing other childhood chronic health conditions, the nature of these relationships in the context of child AD management has not been reported. This study therefore examined relationships between child, parent, and family variables, and parents’ management of child AD and difficult child behaviour, using social cognitive and self-efficacy theory as a guiding framework. The study was conducted in three phases. It employed a quantitative, cross-sectional study design, accessing a community sample of 120 parents of children with AD, and a sample of 64 child-parent dyads recruited from a metropolitan paediatric tertiary referral centre. In Phase One, instruments designed to measure parents’ self-reported performance of AD management tasks (Parents’ Eczema Management Scale – PEMS) and parents’ outcome expectations of task performance (Parents’ Outcome Expectations of Eczema Management Scale – POEEMS) were adapted from the Parental Self-Efficacy with Eczema Care Index (PASECI). In Phase Two, these instruments were used to examine relationships between child, parent, and family variables, and parents’ self-efficacy, outcome expectations, and self-reported performance of AD management tasks. Relationships between child, parent, and family variables, parents’ self-efficacy for managing problem behaviours, and reported parenting practices, were also examined. This latter focus was explored further in Phase Three, in which relationships between observed child and parent behaviour, and parent-reported self-efficacy for managing both child AD and problem behaviours, were explored. Phase One demonstrated the reliability of both PEMS and POEEMS, and confirmed that PASECI was reliable and valid with modification as detailed. Factor analyses revealed two-factor structures for PEMS and PASECI alike, with both scales containing factors related to performing routine management tasks, and managing the child’s symptoms and behaviour. Factor analysis was also applied to POEEMS resulting in a three-factor structure. Factors relating to independent management of AD by the parent, involving healthcare professionals in management, and involving the child in management of AD were found. Parents’ self-efficacy and outcome expectations had a significant influence on self-reported task performance. In Phase Two, relationships emerged between parents’ self-efficacy and self-reported performance of AD management tasks, and AD severity, child behaviour difficulties, parent depression and stress, conflict over parenting issues, and parents’ relationship satisfaction. Using multiple linear regressions, significant proportions of variation in parents’ self-efficacy and self-reported performance of AD management tasks were explained by child behaviour difficulties and parents’ formal education, and self-efficacy emerged as a likely mediator for the relationships between both child behaviour and parents’ education, and performance of AD management tasks. Relationships were also found between parents’ self-efficacy for managing difficult child behaviour and use of dysfunctional parenting strategies, and child behaviour difficulties, parents’ depression and stress, conflict over parenting issues, and relationship satisfaction. While significant proportions of variation in self-efficacy for managing child behaviour were explained by both child behaviour and family income, family income was the only variable to explain a significant proportion of variation in parent-reported use of dysfunctional parenting strategies. Greater use of dysfunctional parenting strategies (both lax and authoritarian parenting) was associated with more severe AD. Parents reporting lower self-efficacy for managing AD also reported lower self-efficacy for managing difficult child behaviour; likewise, less successful self-reported performance of AD management tasks was associated with greater use of dysfunctional parenting strategies. When child and parent behaviour was directly observed in Phase Three, more aversive child behaviour was associated with lower self-efficacy, less positive outcome expectations, and poorer self-reported performance of AD management tasks by parents. Importantly, there were strong positive relationships between these variables (self-efficacy, outcome expectations, and self-reported task performance) and parents’ observed competence when providing treatment to their child. Less competent performance was also associated with greater parent-reported child behaviour difficulties, parent depression and stress, parenting conflict, and relationship dissatisfaction. Overall, this study revealed the importance of child behaviour to parents’ confidence and practices in the contexts of child AD and child behaviour management. Parents of children with concurrent AD and behavioural problems are at particular risk of having low self-efficacy for managing their child’s AD and difficult behaviour. Children with more severe AD are also at higher risk of behaviour problems, and thus represent a high-risk group of children whose parents may struggle to manage the disease successfully. As one of the first studies to examine the role and correlates of parents’ self-efficacy in child AD management, this study identified a number of potentially modifiable factors that can be targeted to enhance parents’ self-efficacy, and improve parent management of child AD. In particular, interventions should focus on child behaviour and parenting issues to support parents caring for children with AD and improve child health outcomes. In future, findings from this research will assist healthcare teams to identify parents most in need of support and intervention, and inform the development and testing of targeted multidisciplinary strategies to support parents caring for children with AD.

Employee perceived workplace stress : examining core self-evaluations, political skill, coping strategies and support

-

How burned out employees perceive work stress and organisational burnout

-

Predictive compensation for variable network delays and packet losses in networked control systems

Networked control systems (NCSs) offer many advantages over conventional control; however, they also demonstrate challenging problems such as network-induced delay and packet losses. This paper proposes an approach of predictive compensation for simultaneous network-induced delays and packet losses. Different from the majority of existing NCS control methods, the proposed approach addresses co-design of both network and controller. It also alleviates the requirements of precise process models and full understanding of NCS network dynamics. For a series of possible sensor-to-actuator delays, the controller computes a series of corresponding redundant control values. Then, it sends out those control values in a single packet to the actuator. Once receiving the control packet, the actuator measures the actual sensor-to-actuator delay and computes the control signals from the control packet. When packet dropout occurs, the actuator utilizes past control packets to generate an appropriate control signal. The effectiveness of the approach is demonstrated through examples.

Flexible high voltage pulsed power supply for plasma applications

Demands for delivering high instantaneous power in a compressed form (pulse shape) have widely increased during recent decades. The flexible shapes with variable pulse specifications offered by pulsed power have made it a practical and effective supply method for an extensive range of applications. In particular, the release of basic subatomic particles (i.e. electron, proton and neutron) in an atom (ionization process) and the synthesizing of molecules to form ions or other molecules are among those reactions that necessitate large amount of instantaneous power. In addition to the decomposition process, there have recently been requests for pulsed power in other areas such as in the combination of molecules (i.e. fusion, material joining), gessoes radiations (i.e. electron beams, laser, and radar), explosions (i.e. concrete recycling), wastewater, exhausted gas, and material surface treatments. These pulses are widely employed in the silent discharge process in all types of materials (including gas, fluid and solid); in some cases, to form the plasma and consequently accelerate the associated process. Due to this fast growing demand for pulsed power in industrial and environmental applications, the exigency of having more efficient and flexible pulse modulators is now receiving greater consideration. Sensitive applications, such as plasma fusion and laser guns also require more precisely produced repetitive pulses with a higher quality. Many research studies are being conducted in different areas that need a flexible pulse modulator to vary pulse features to investigate the influence of these variations on the application. In addition, there is the need to prevent the waste of a considerable amount of energy caused by the arc phenomena that frequently occur after the plasma process. The control over power flow during the supply process is a critical skill that enables the pulse supply to halt the supply process at any stage. Different pulse modulators which utilise different accumulation techniques including Marx Generators (MG), Magnetic Pulse Compressors (MPC), Pulse Forming Networks (PFN) and Multistage Blumlein Lines (MBL) are currently employed to supply a wide range of applications. Gas/Magnetic switching technologies (such as spark gap and hydrogen thyratron) have conventionally been used as switching devices in pulse modulator structures because of their high voltage ratings and considerably low rising times. However, they also suffer from serious drawbacks such as, their low efficiency, reliability and repetition rate, and also their short life span. Being bulky, heavy and expensive are the other disadvantages associated with these devices. Recently developed solid-state switching technology is an appropriate substitution for these switching devices due to the benefits they bring to the pulse supplies. Besides being compact, efficient, reasonable and reliable, and having a long life span, their high frequency switching skill allows repetitive operation of pulsed power supply. The main concerns in using solid-state transistors are the voltage rating and the rising time of available switches that, in some cases, cannot satisfy the application’s requirements. However, there are several power electronics configurations and techniques that make solid-state utilisation feasible for high voltage pulse generation. Therefore, the design and development of novel methods and topologies with higher efficiency and flexibility for pulsed power generators have been considered as the main scope of this research work. This aim is pursued through several innovative proposals that can be classified under the following two principal objectives. • To innovate and develop novel solid-state based topologies for pulsed power generation • To improve available technologies that have the potential to accommodate solid-state technology by revising, reconfiguring and adjusting their structure and control algorithms. The quest to distinguish novel topologies for a proper pulsed power production was begun with a deep and through review of conventional pulse generators and useful power electronics topologies. As a result of this study, it appears that efficiency and flexibility are the most significant demands of plasma applications that have not been met by state-of-the-art methods. Many solid-state based configurations were considered and simulated in order to evaluate their potential to be utilised in the pulsed power area. Parts of this literature review are documented in Chapter 1 of this thesis. Current source topologies demonstrate valuable advantages in supplying the loads with capacitive characteristics such as plasma applications. To investigate the influence of switching transients associated with solid-state devices on rise time of pulses, simulation based studies have been undertaken. A variable current source is considered to pump different current levels to a capacitive load, and it was evident that dissimilar dv/dts are produced at the output. Thereby, transient effects on pulse rising time are denied regarding the evidence acquired from this examination. A detailed report of this study is given in Chapter 6 of this thesis. This study inspired the design of a solid-state based topology that take advantage of both current and voltage sources. A series of switch-resistor-capacitor units at the output splits the produced voltage to lower levels, so it can be shared by the switches. A smart but complicated switching strategy is also designed to discharge the residual energy after each supply cycle. To prevent reverse power flow and to reduce the complexity of the control algorithm in this system, the resistors in common paths of units are substituted with diode rectifiers (switch-diode-capacitor). This modification not only gives the feasibility of stopping the load supply process to the supplier at any stage (and consequently saving energy), but also enables the converter to operate in a two-stroke mode with asymmetrical capacitors. The components’ determination and exchanging energy calculations are accomplished with respect to application specifications and demands. Both topologies were simply modelled and simulation studies have been carried out with the simplified models. Experimental assessments were also executed on implemented hardware and the approaches verified the initial analysis. Reports on details of both converters are thoroughly discussed in Chapters 2 and 3 of the thesis. Conventional MGs have been recently modified to use solid-state transistors (i.e. Insulated gate bipolar transistors) instead of magnetic/gas switching devices. Resistive insulators previously used in their structures are substituted by diode rectifiers to adjust MGs for a proper voltage sharing. However, despite utilizing solid-state technology in MGs configurations, further design and control amendments can still be made to achieve an improved performance with fewer components. Considering a number of charging techniques, resonant phenomenon is adopted in a proposal to charge the capacitors. In addition to charging the capacitors at twice the input voltage, triggering switches at the moment at which the conducted current through switches is zero significantly reduces the switching losses. Another configuration is also introduced in this research for Marx topology based on commutation circuits that use a current source to charge the capacitors. According to this design, diode-capacitor units, each including two Marx stages, are connected in cascade through solid-state devices and aggregate the voltages across the capacitors to produce a high voltage pulse. The polarity of voltage across one capacitor in each unit is reversed in an intermediate mode by connecting the commutation circuit to the capacitor. The insulation of input side from load side is provided in this topology by disconnecting the load from the current source during the supply process. Furthermore, the number of required fast switching devices in both designs is reduced to half of the number used in a conventional MG; they are replaced with slower switches (such as Thyristors) that need simpler driving modules. In addition, the contributing switches in discharging paths are decreased to half; this decrease leads to a reduction in conduction losses. Associated models are simulated, and hardware tests are performed to verify the validity of proposed topologies. Chapters 4, 5 and 7 of the thesis present all relevant analysis and approaches according to these topologies.

Determination of stress-strain characteristics of railhead steel using image analysis

True stress-strain curve of railhead steel is required to investigate the behaviour of railhead under wheel loading through elasto-plastic Finite Element (FE) analysis. To reduce the rate of wear, the railhead material is hardened through annealing and quenching. The Australian standard rail sections are not fully hardened and hence suffer from non-uniform distribution of the material property; usage of average properties in the FE modelling can potentially induce error in the predicted plastic strains. Coupons obtained at varying depths of the railhead were, therefore, tested under axial tension and the strains were measured using strain gauges as well as an image analysis technique, known as the Particle Image Velocimetry (PIV). The head hardened steel exhibit existence of three distinct zones of yield strength; the yield strength as the ratio of the average yield strength provided in the standard (σyr=780MPa) and the corresponding depth as the ratio of the head hardened zone along the axis of symmetry are as follows: (1.17 σyr, 20%), (1.06 σyr, 20%- 80%) and (0.71 σyr, > 80%). The stress-strain curves exhibit limited plastic zone with fracture occurring at strain less than 0.1.

Educational stress scale for adolescents : development, validity, and reliability with Chinese students

This article describes the development and initial validation of a new instrument to measure academic stress—the Educational Stress Scale for Adolescents (ESSA). A series of cross-sectional questionnaire surveys were conducted with more than 2,000 Chinese adolescents to examine the psychometric properties. The final 16-item ESSA contains five latent variables: Pressure from study, Workload, Worry about grades, Self-expectation, and Despondency, which together explain 64% of the total item variance. Scale scores showed adequate internal consistency, 2-week test–retest reliability, and satisfactory concurrent validity. A confirmatory factor analysis suggested the proposed factor model fits well in a different sample. For researchers who have a particular interest in academic stress among adolescents, the ESSA promises to be a useful tool.

Ein Beitrag zur Methode der ergonomischen Beurteilung des Einstiegs ausgewählter Nutzfahrzeuge

Ergonomic and biomechanical conditions of ingress-egress were investigated and modelled for lorry drivers. A variable buck and a motion capture system were developped and built. Ingress - egress motion was captured and analyzed for conditons representitive for a majority of lorries, and a cohort of male subjects. A fuzzy-neural network classifier was developed to assess the motion and advise optimum dimensions for lorry package design, based on minimum human stress and optimum comfort.

Communities Under Stress: Understanding and Managing Growth in Resource–Based Regions–The case of the Western Downs, Queensland

The Western Downs region, located in Southern Queensland, about 200 kilometres west of Brisbane, has been experiencing rapid and significant changes over the past years, due to a massive boom in the energy sector. The rapid growth triggered by the development of mining and energy sectors has generated environmental, socio-economic and land use issues, and has revealed strong weaknesses within the region’s current governance arrangements. The present paper develops a four-stage approach to managing current and expected changes in a resource-based region under tremendous stress and uncertainty.

Two-Photon Fluorescence Microscopy Imaging of Cellular Oxidative Stress Using Profluorescent Nitroxides

A range of varying chromophore nitroxide free radicals and their nonradical methoxyamine analogues were synthesized and their linear photophysical properties examined. The presence of the proximate free radical masks the chromophore’s usual fluorescence emission, and these species are described as profluorescent. Two nitroxides incorporating anthracene and fluorescein chromophores (compounds 7 and 19, respectively) exhibited two-photon absorption (2PA) cross sections of approximately 400 G.M. when excited at wavelengths greater than 800 nm. Both of these profluorescent nitroxides demonstrated low cytotoxicity toward Chinese hamster ovary (CHO) cells. Imaging colocalization experiments with the commercially available CellROX Deep Red oxidative stress monitor demonstrated good cellular uptake of the nitroxide probes. Sensitivity of the nitroxide probes to H2O2-induced damage was also demonstrated by both one- and two-photon fluorescence microscopy. These profluorescent nitroxide probes are potentially powerful tools for imaging oxidative stress in biological systems, and they essentially “light up” in the presence of certain species generated from oxidative stress. The high ratio of the fluorescence quantum yield between the profluorescent nitroxide species and their nonradical adducts provides the sensitivity required for measuring a range of cellular redox environments. Furthermore, their reasonable 2PA cross sections provide for the option of using two-photon fluorescence microscopy, which circumvents commonly encountered disadvantages associated with one-photon imaging such as photobleaching and poor tissue penetration.

Acculturation stress in South Sudanese refugees : impact on marital relationships

A qualitative approach was used to explore the impact of acculturation stress on the marital relationships of South Sudanese refugees settled in Brisbane, Australia. Thirteen refugees, who were currently or previously married, participated in three gender specific focus groups. The perceived causes and possible solutions of conflict were thoroughly explored. Hypothetical scenarios were used to facilitate group discussion. Major issues causing conflict between couples were identified as: the management of finances and lack of family and social support. Several other areas of acculturation stress also emerged as factors associated with marital stress. There was a dissonance regarding the adherence to cultural gender roles. Freedom provided to women in Australia caused tension between the couples. Law enforcement officers were perceived as lacking cultural understanding and misinterpreting the couple distress. Finally, limited information provided to refugees pre and post migration was considered to hinder adjustment. The participants suggested a number of practical solutions to these issues which are potentially useful in guiding future refugee settlement programs.