1000 resultados para Universidade Tecnológica Federal do Paraná


Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study was developed in objecting to investigate the use and occupation of land in 1999, 2005, 2011 e 2015 and estimate soil degradation by laminar erosion and the relation with water quality in 2015 in the catchment basin of the Barro Preto river, Coronel Vivida – PR. For multitemporal analysis of use and occupation of land in the basin used in the Landsat 5, 7 and 8 images and Geographic Information System. The laminar erosion was estimated by the Universal Soil Loss Equation through the systematization of calculations of the factors that compose the equation in SPRING/INPE. The water quality of the studied river section was evaluated according to the Water Quality Idex and the Resolution CONAMA n. 357/2005. The multitemporal analysis of the use and occupation of land has demonstrated that basin is predominantly agricultural in all years studied, as well as the permanent preservation area presents it not regularized during the period in accordance with the Brazilian Forest Code in force. In relation the quantification of laminar soil erosion in the study period, the rainfall and runoff factor was estimated considering the rainfall data from 1986 to 2014 and resulted in a value of 11.573,47 MJ/ha.mm/a. The Dystrophic Red Latosol, Dystrophic Red Nitisol, Fluvisol and Leptosol soil erodibility factor were 0,0138, 0,0137, 0,0207, 0,0196 t.ha.h/ha.MJ.mm/a, respectively. The topographical factor has demonstrated that the catchment basin has the rough terrain because the moderate and moderate strong classes are dominant in the study area. The cover and management and support practice factors were estimated according to the multitemporal analysis of the use and occupation of land in the basin and the values ranged from 0,0006 to 0,0688. The soil losses by laminar erosion were simulated with agriculture areas with corn and soybeans in no-till. The soil losses with maize crop in no-till in 1999, 2005, 2011 and 2015 were 9.782,75, 10.592,71, 9.636,61 e 11.058,26 t/year, respectively, and soybeans crops in no-till were 15.140,01, 16.645,20, 14.662,14 e 17.049,85 t/year, respectively. In relation with water quality of the section studied river, the average of Water Quality Index during the season were 55,47, 53,09 and 49,72, for the first, second and third sample point, respectively. Indication a decrease in water quality since the source to the last sample point. It is concluded that the use and occupation of land in the catchment basin interferes in the water quality, as well as in soil degradation.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This dissertation deals with the conceptions of the relationship between science, technology, innovation, development and society. We aimed to analyze the ways to conceive these relations in documents of the Entrepreneurship and Innovation Programme (Proem) of the Federal Technological University of Paraná (UTFPR) and analyze the conceptions of these relations in view of managers and participants of the Program on Campus Cornélio Procópio, locus of research. It is recognized that the concepts of science, technology, innovation and development are polysemic, so varied are the definitions given by different theorists. For the research were characterized these conceptions into two streams, one called traditional or conservative current, which is supported by the classical theories, that is, those that were developed by authors recognized as classics, and the other current, referred to as critical concepts that sustains it are presented by authors recognized as critical, among which houses the Science studies, Technology and Society (CTS). This categorization buoyed analysis of Proem documents and analysis of the statements collected through interviews with three managers of Proem and eleven participants in the Program. As a result of the research, in general, although there is evidence in Proem documents of a social concern in relation to its role in society, it was observed that the program is based on the traditional and hegemonic view on the subject. In the documents analysis, it was noticed that the conceptions arranged CTS studies are present in relation to the multidimensional development concept. However, the texts analyzed, mostly were identified strong indications of thought supported by logical positivism, in propositions that refer to marketing issues, a proposal to generate an entrepreneurial culture guided by the development of technological innovations designed to meet and / or induce market demands, through production methods for popular goods. As for how managers and participants Proem in Campus Cornelius conceive the relationship between science, technology, innovation, development and society, also was identified closer to the classical view, although the respondents have pointed out many times in their speak apparent concern with social issues, like designing the development from a multidimensional view as cover critical studies CTS. The views of the participants, it was possible to link the strengthening of the concept connected to the linear model of development, in which the more it generates science, more is generated technology and more technology therefore produces more wealth, which in turn, the Schumpeterian view, is the basis of social welfare.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Drilling fluids present a thixotropic behavior and they usually gel when at rest. The sol-gel transition is fundamental to prevent the deposit of rock fragments, generated by drilling the well, over the drill bit during eventual stops. Under those conditions, high pressures are then required in order to break-up the gel when circulation is resumed. Moreover, very high pressures can damage the rock formation at the bottom of the well. Thus, a better understanding of thixotropy and the behavior of thixotropic materials becomes increasingly important for process control. The mechanisms that control thixotropy are not yet well defined and modeling is still a challenge. The objective of this work is to develop a mathematical model to study the pressure transmission in drilling fluids. This work presents a review of thixotropy and of different mathematical models found in the literature that are used to predict such characteristic. It also shows a review of transient flows of compressible fluids. The problem is modeled as the flow between the drillpipe and the annular region (space between the wall and the external part of the drillpipe). The equations that describe the problem (mass conservation, momentum balance, constitutive and state) are then discretized and numerically solved by using a computational algorithm in Fortran. The model is validated with experimental and numerical data obtained from the literature. Comparisons between experimental data obtained from Petrobras and calculated by three viscoplastic and one pseudoplastic models are conducted. The viscoplastic fluids, due to the yield stress, do not fully transmit the pressure to the outlet of the annular space. Sensibility analyses are then conducted in order to evaluate the thixotropic effect in pressure transmission.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Abstract – Background – The software effort estimation research area aims to improve the accuracy of this estimation in software projects and activities. Aims – This study describes the development and usage of a web application tocollect data generated from the Planning Poker estimation process and the analysis of the collected data to investigate the impact of revising previous estimates when conducting similar estimates in a Planning Poker context. Method – Software activities were estimated by Universidade Tecnológica Federal do Paraná (UTFPR) computer students, using Planning Poker, with and without revising previous similar activities, storing data regarding the decision-making process. And the collected data was used to investigate the impact that revising similar executed activities have in the software effort estimates' accuracy.Obtained Results – The UTFPR computer students were divided into 14 groups. Eight of them showed accuracy increase in more than half of their estimates. Three of them had almost the same accuracy in more than half of their estimates. And only three of them had loss of accuracy in more than half of their estimates. Conclusion – Reviewing the similar executed software activities, when using Planning Poker, led to more accurate software estimates in most cases, and, because of that, can improve the software development process.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study focuses on the representations of science and technology in the thinking of the Brazilian intellectual Gustavo Barroso in the period between 1909 and 1935. As one of the main leaders of the Brazilian Integralism, we will discuss,especially, his eugenic vision, prior to his participation in integralism and the influence of this science in building his authoritarian and anti-Semitic thinking. We seek to realize Gustavo Barroso dialogue, in a context of profound social and political changes, with the search for a nationalism "truly Brazilian." The methodology used was of a documentary and literature research , highlighting the analysis of Gustavo Barroso books, which were used as primary sources: Intelligencia das Coisas(1923), Aquém da Atlântida (1931), Brasil Colônia de Banqueiros (1934), O Integralismo de Norte a Sul (1934), O Quarto Império (1935) e A Palavra e o Pensamento Integralista (1935), and, also, some of his articles surveyed in the National History Museum collection. The survey results show that in this period Gustavo Barroso went on to develop in his writings an eugenic and authoritarian political vision, later, in his integralist phase, linked strongly to an anti-Semitic view.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Hospitals are a big part of the service sector. Thus, such institutions are highly influenced by the logic of the capitalist accumulation, technology and forms of labor organization, especially by private organizations. Starting with the restructuring process motion and incorporation of technologies, many changes in the working process occur, therefore, the activities of medical professionals as well. During the preparation of this research items regarding the banalization of evil were identified. This banalization and resignation of the professionals face to violence are caused by the adoption of collective defense strategies. Therefore, this research aims to analyze how the rationalization of working conditions by gynecologists obstetricians and pediatricians working in the emergency rooms of public and private hospitals in Curitiba and metropolitan region occurs. An approach of mixed methods was used as methodological procedures. The naturalization of violence, the suffering which professionals are submitted to, are combined with the political and ideological control, bureaucratic control, the imaginary built about hospitals and collective defense strategies. It is therefore possible to understand that labor conditions of gynecologists obstetricians and pediatricians in emergency rooms are rationalized. When social injustice is naturalized, political strategies for changes are not possible. For this reason, the first step is to gather awareness, there is a need to unveil the reality, to understand the phenomena at its core and discard superficialities. It is also necessary that the actions and expressions of indignation to come hand in hand with political actions in order to change to happen.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work presents the development and modification of techniques to reduce the effects of load variation and mains frequency deviation in repetitive controllers applied to active power filters. To minimize the effects of aperiodic signals resulting from the connection or disconnection of non-linear loads is developed a technique which recognizes linear and nonlinear loads, and operates to reset the controller only when the error due to the transition of considerable value, and the transition is from non-linear to linear load. An algorithm to adapt the gain of the repetitive controller, based on a sigmoid function adaptation, in order to minimize the effects caused by random noise in the measurement system is also used. This work also analyzes the effects of frequency variation and presents the main methods to cope with this situation. Some solutions are the change in the number of samples per period and the variation of the sampling rate. The first has the advantage of using linear design techniques and results in a time invariant system. The second method changes the sampling frequency and leads to a time variant system that demands a difficult analysis of stability. The proposed algorithms were tested using the methods of truncation of the number of samples and the method of changing the sampling rate of the system to compensate possible frequency variations of the grid. Experimental results are presented to validate the proposal.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work aims to develop optical sensors for temperature monitoring in hydroelectric power plant heat exchangers. The proposed sensors are based on the Fiber Bragg Gratings technology. First of all, a prototype with three sensors inscribed in a same fiber was developed. This fiber was then fixed to a conventional Pt100 sensor rod and inserted in a thermowell. The ensemble was then calibrated in a workbench, presenting a maximum combined uncertainty of 2,06 °C. The sensor was installed in one of the heat exchangers of the Salto Osório’s hydroelectric power plant. This power plant is situated in the Iguaçu river, at the Paraná state. Despite the satisfactory results, the sensor was improved to a second version. In this, fifteen optical Bragg sensors were inscribed in a same fiber. The fixation with a conventional sensor was no longer necessary, because the first version results comproved the efficiency and response time in comparison to a conventional sensor. For this reason, it was decided to position the fiber inside a stainless steel rod, due to his low thermal expansion coefficient and high corrosion immunity. The utilization of fifteen fiber Bragg gratings aims to improve the sensor spatial resolution. Therefore, measurements every ten centimeters with respect to the heat exchanger’s height are possible. This provides the generation of a thermal map of the heat exchanger’s surface, which can be used for determination of possible points of obstruction in the hydraulic circuit of the heat exchanger. The heat exchanger’s obstruction in hydroelectric power plants usually occur by bio-fouling, and has direct influence in the generator’s cooling system efficiency. The obtained results have demonstrated the feasibility in application of the optical sensors technology in hydroelectric power plants.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Power generation from alternative sources is at present the subject of numerous research and development in science and industry. Wind energy stands out in this scenario as one of the most prominent alternative in the generation of electricity, by its numerous advantages. In research works, computer reproduction and experimental behavior of a wind turbine are very suitable tools for the development and study of new technologies and the use of wind potential of a given region. These tools generally are desired to include simulation of mechanical and electrical parameters that directly affect the energy conversion. This work presents the energy conversion process in wind systems for power generation, in order to develop a tool for wind turbine emulation testing experimental, using LabVIEW® software. The purpose of this tool is to emulate the torque developed in an axis wind turbine. The physical setup consists of a three phase induction motor and a permanent magnet synchronous generator, which are evaluated under different wind speed conditions. This tool has the objective to be flexible to other laboratory arrangements, and can be used in other wind power generation structures in real time. A modeling of the wind power system is presented, from the turbine to the electrical generator. A simulation tool is developed using Matlab/Simulink® with the purpose to pre-validate the experiment setup. Finally, the design is implemented in a laboratory setup.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper presents the development of a boost converter with the possibility of higher gain than the conventional boost converter for applications under similar conditions and increased power. Presents the main concepts involving the boost converter and two variations: the boost converter of three levels and the boost converter interspersed with two converter cells. The breakdown mounting positions, the operating steps, the addressing and the main strengths of each converter in order to check for possible uses in the construction of a prototype joining their main advantages. In the presentation of this converter addresses the operating steps, the equation governing its design, the simulations obtained through software (PSIM), a comparison between the boost converter models studied and the experimental results.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The electric power systems are getting more complex and covering larger areas day by day. This fact has been contribuiting to the development of monitoring techniques that aim to help the analysis, control and planning of power systems. Supervisory Control and Data Acquisition (SCADA) systems, Wide Area Measurement Systems and disturbance record systems. Unlike SCADA and WAMS, disturbance record systems are mainly used for offilne analysis in occurrences where a fault resulted in tripping of and apparatus such as a transimission line, transformer, generator and so on. The device responsible for record the disturbances is called Digital Fault Recorder (DFR) and records, basically, electrical quantities as voltage and currents and also, records digital information from protection system devices. Generally, in power plants, all the DFRs data are centralized in the utility data centre and it results in an excess of data that difficults the task of analysis by the specialist engineers. This dissertation shows a new methodology for automated analysis of disturbances in power plants. A fuzzy reasoning system is proposed to deal with the data from the DFRs. The objective of the system is to help the engineer resposnible for the analysis of the DFRs’s information by means of a pre-classification of data. For that, the fuzzy system is responsible for generating unit operational state diagnosis and fault classification.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The study aims to analyze comic strips on the internet, from three different artists: Carlos Ruas, creator of "Um Sábado Qualquer", André Farias, of "Vida de Suporte," and William Leite, author of "Willtirando". The discussion covers the relationship between comics and technology by analyzing the comic strip and the construction of its meaning. The qualitative reflection is aggregated by quantitative data, through which the work shows possible outcomes for the language of the online comic strips, such as the expansion in the format; increased hybridization with various types of images; and the approach phenomenon between the spheres author/reader in digital format. Productions of a most unusual kind also were discussed: the digital comic strips, that incorporate animated effects on its narrative. At the end of the study, we present an online comic strip prototype from the most popular formats used by the authors, in order to reiterate the nature of the comic strips: a brief narrative whose outcome is unexpected and results in humor.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

One of the biggest environmental problems of the population is the lack of sewage treatment, especially in rural communities and low-income. The development of technologies for efficient, low-cost sanitation need to be developed to meet the disadvantaged people of this basic service. This work was the implementation proposal of a technology called constructed wetlands, also known as Wastewater Treatment Plant for Roots Zone - ETEZR. The objective was to develop a non- formal environmental education proposal for redevelopment, using outreach methods for residents and deployment of this technology ETEZR in the rural community of Cologne Grebe in Sao Jose dos Pinhais - PR. With technical support from the Paranaense Technical Assistance and Rural Extension Institute -EMATER and the Federal Technological University of Paraná - UTFPR, 5 ETEZR were deployed in the colony through three theoretical and practical workshops, which involved total 67 people from the community 5 technicians EMATER and 13 of the Municipal Town Hall. Após4 months of implementation were carried out two collections of raw wastewater and treated to analyze physical, chemical and biological parameters. The results evaluated by chemical parameters BOD, COD, phosphorus, ammonia nitrogen comparing raw and treated sewage, demonstrate that ETEZR are effective in the treatment of sewage. 5 Seasons minimum and maximum efficiency between the basic parameters analyzed were 52.2 to 95.5% for BOD; 47 to 94.5% for COD; 21.5 to 96% phosphorus; 30-98% for ammonia nitrogen. Oils and greases, and a series of solid also achieved a significant reduction in their values when comparing the raw sewage and treated sewage, and biological parameters evaluated by means of coliforms showed a reduction of 80 to 99%. With the implementation of environmental education process aimed sanitation was possible to evaluate the perception of the population to accept the environmental sanitation technology using the ETEZR, understand the needs and sanitation concepts for the community. This research evaluated the development of the methodology applied by the non-formal environmental education in order to provide subsidies for rural sanitation plan process for the municipality.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Electrical Submersible Pump (ESP) is used as an artificial lift technique. However, pumping viscous oil is generally associated with low Reynolds number flows. This condition leads to a performance degradation respect to the performance expected from the regular operation with water that most of the centrifugal pumps are originally designed for. These issues are considered in this investigation through a numerical study of the flow in two different multistage, semi-axial type ESPs. This investigation is carried out numerically using a Computational Fluid Dynamics (CFD) package, where the transient RANS equations are solved numerically. The turbulence is modeled using the SST model. Head curves for several operating conditions are compared with manufacturer’s curves and experimental data for a three-stage ESP, showing good agreement for a wide range of fluid viscosities and rotational speeds. Dimensionless numbers (n, n, n e Re) are used to investigate performance degradation of the ESPs. In addition, flow phenomena through the impellers of the ESPs are investigated using flow field from numerical results. Results show that performance degradation is directly related to rotational Reynolds number, Re. In addition, it was verified that performance degradation occurs for constant normalized specific speedn, which shows that performance degradation occurs similarly for different centrifugal pumps. Moreover, experimental data and numerical results agreed with a correlation from literature between head and flow correction factors proposed by Stepanoff (1967). A definition of modified Reynolds number was proposed and relates the head correction factor to viscosity. A correlation between head correction factor and the modified Reynolds number was proposed, which agreed well with numerical and experimental data. Then, a method to predict performance degradation based on the previous correlations was proposed. This method was compared with others from literature. In general, results and conclusions from this work can also be useful to bring more information about the flow of highly viscous fluids in pumps, especially in semi-axial, multistage ESPs.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Supply chains have become an important focus for competitive advantage. The performance of a company increasingly depends on its ability to maintain effective and efficient relationships with its suppliers and customers. The extended enterprise (i.e. composed of several partners) needs to be dynamically formed in order to be agile and adaptable. According to the Digital Manufacturing paradigm, companies have to be able to quickly share and disseminate information regarding planning, designing and manufacturing of products. Additionally, they must be responsive to all technical and business determinants, as well as be assessed and certified for guaranteed performance. The current research intends to present a solution for the dynamic composition of the extended enterprise, formed to take advantage of market opportunities quickly and efficiently. A construction model was developed. This construction model consists of: information model, protocol model and process model. The information model has been defined based on the concepts of Supply Chain Operations Reference model (SCOR®). In this model is defined information for negotiating the participation of candidate companies in the dynamic establishment of a network for responding to a given demand for developing and manufacturing products, in seven steps as follows: request for information; request for qualification; alignment of strategy; request for proposal; request for quotation; compatibility of process; and compatibility of system. The protocol model has been elaborated and inspired in the OSI, this model provides a framework for linking customers and suppliers, indicates a sequence to be followed, in order to selecte companies to become suppliers. The process model has been implemented by means of process modeling according to the BPMN standard and, in turn, implemented as a web-based application that runs the process through its several steps, which uses forms to gather data. An application example in the context of the oil and gas industry is used for demonstrating the solution concept.