Show de Mamulengos Heraldo Lins: construções e transformações de um espetáculo na cultura popular

The theater of puppets is one of the many expressions of popular culture which is marked by ongoing constructions and transformations in its symbolic representations as well as its characters and performances. In the city of Natal/RN, there is a manipulator called Heraldo Lins, an artist who operates such puppets, and has been performing his puppet since 1992. Lins has his own look at how he produces his performances and seeks to adjust his puppets to social and rentable contexts. Lins‟s performances are tailor-made in accordance with the request of his customers, as he makes up the passages and lines of his puppets according to his audience. This research aimed to study how the Heraldo Lins Mamulengos Show is built, especially its changes. We note that Lins chooses to dismantle the symbolic values of the tradition in the regular puppet theater once he adapts to modern patterns, placing himself between the traditional puppet theater and the cultural industry. The work in camp was made through a methodological focused in a participative observation and an audiovisual registry

Ribeira, técnica versus natureza: transformações em prol de um projeto de modernização (1860-1932)

The necessity of the insertion of the capital of Rio Grande do Norte in the world-wide commercial scene and its claim as the seat of political power, in ends of nineteenth and beginning of twentieth century, determined the direction of urban interventions undertaken by government to restructure the city. In that matter, there were several actions of improvements and embellishment in Natal, which had, as a starting point, the adequacy works of the port, located in the Ribeira quarter, with the aim of ending the physical isolation that reinforced its economic stagnation. Besides the problems faced in the opening bar of the Potengi River, and would complement the required improvements, other barriers demonstrate the tension established between the physic-geographic field and the man: the flooded and slope which connected Cidade Alta and Ribeira the first two quarters of the city.The execution of these works demanded knowledge whose domain and application it was for engineering. But, how the actions done for the engineers, in sense to transform natural areas into constructed spaces made possible the intentional conformation of the quarter of the Ribeira in a commercial and politician-administrative center, in the middle of the XIX century and beginning of the XX? Understand, therefore, the employment effects of technology on the physical-geographical Ribeira, is the objective of this work that uses theoretical and methodological procedures of Urban Environmental History, by analyzing the relationship between the environment and the man, mediated by knowledge and use of technologies. The documental research was used, as primary sources, the Messages of the Provincial Assembly Government that later became the Legislative Assembly of Rio Grande do Norte reports and articles on specialized publications, in addition to local newspapers. The work is structured in five chapters. First, some comments about Urban Environmental History (Chapter 1) supplemented with analysis of the conceptual construction of nature in the Contemporary Era and its application in the city (chapter 02), the following chapters (03 and 04) deal with the rise of engineers as a active group in the Brazilian government frameworks and their vision about the nature inside the urban environment and it is studied how the professional technicians dealt with the improvement work of the harbor and in the shock with the natural forces. Other works that would complement this "project" of modernization and had had natural obstacles to be removed the Ribeira flood and slope constitute the subject of the fifth chapter. Finally, some final considerations retake the initial discussions aiming an association between the technique and the nature as junction elements inside the process of constitution of a Modern Natal

Da proteção à precarização um estudo do fenômeno jurídico trabalhista no contexto das transformações do capitalismo

This research aims to investigate the effectiveness of the legal labor phenomenon in contemporary capitalism as rectifier element of the contradictions between capital and labor. From the analysis of legislative developments - state and business - and court decisions related to the category of freight transport is expected to determine the protectionist stiffness proclaimed by the institutional structure of labor in Brazil, considered by the hegemonic discourse as political-economic factor that prevents growth. It is intended to unravel the relationships between political and civil society, studying the internal contradictions and ideological influence among these spaces, with theoretical support in Marx and Gramsci. The function of this research is to test the premise that the protectionist discourse is a rational action of capitalism and the organic intellectuals of political society in order to achieve hegemony and hide the real contradictions between capital and labor, in addition to also assist in the discussion on deregulation and easing in Brazil. The analysis points to the confirmation of our premise, since the evolution of the legal phenomenon in the transport sector was charging toward the neoliberal project

Transformações técnico-podutivas e comerciais na pecuária de corte brasileira a partir da década de 90

Analisou-se o perfil da pecuária de corte brasileira diante das mudanças ocorridas no sistema de produção/comercialização, observando-se especificamente os índices zootécnicos e produtivos e os volumes de carne produzidos, consumidos e exportados a partir de 1990. Foram analisados dados de trabalhos científicos e de artigos técnicos publicados em jornais e revistas, além de informações veiculadas pela internet. Considerando os resultados obtidos, pode-se inferir que o país apresenta significativo potencial de expansão das exportações de carne bovina, o que exige ajustes internos, que envolvem aspectos sanitários, políticas setoriais e visão mais sistêmica de cadeia produtiva. Destaca-se que esses aspectos ganharam maior importância após a consolidação do Mercado Comum do Sul (Mercosul), quando as relações comerciais se intensificaram e as reações da produção nacional impediram inflexões na estrutura comercial de carne bovina nos mercados interno e externo.

Estádios de desenvolvimento e vias de contato e absorção dos herbicidas na inviabilização de tubérculos de Cyperus rotundus

Herbicidas que inviabilizam tubérculos de tiririca (Cyperus rotundus) quando absorvidos nas folhas ou na solução do solo, garantem melhor desempenho para a desinfestação gradativa da área. O objetivo do presente trabalho foi avaliar os estádios de crescimento mais adequados para a aplicação de herbicidas em pós-emergência, além da possibilidade de ação dos principais herbicidas na parte subterrânea da tiririca após aplicação localizada na parte aérea, no solo e sobre ambos os meios. Foram conduzidos dois experimentos em casa de vegetação do Departamento de Fitossanidade da Universidade Estadual Paulista, campus de Jaboticabal-SP. Os resultados do primeiro experimento mostraram que todos os herbicidas estudados (trifloxysulfuron-sodium + ametrine, halosulfuron, sulfentrazone e imazapic) proporcionaram reduções significativas no número de tubérculos viáveis, de forma coerente com suas características de atuação e pela via em que são recomendados. No segundo experimento, as maiores porcentagens de tubérculos afetados na seqüência das cadeias, a partir das manifestações epígeas originais e derivadas, foram obtidas nas aplicações de trifloxysulfuron-sodium + ametrine nos estádios jovem e de pré-florescimento das plantas de tiririca, de halosulfuron no estádio jovem e de glyphosate no de pré-florescimento.

Atividade e população microbiana envolvida nas transformações do enxofre em solos com diferentes vegetações

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação do contato pneu-solo em três modelos de pneus agrícolas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desgaste de polímeros estruturais de engenharia em contato de deslizamento com cilindro metálico

Present work proposed to map and features the wear mechanisms of structural polymers of engineering derived of the sliding contact with a metallic cylindrical spindle submitted to eccentricity due to fluctuations in it is mass and geometric centers. For this it was projected and makes an experimental apparatus from balancing machine where the cylindrical counterbody was supported in two bearings and the polymeric coupon was situated in a holder with freedom of displacement along counterbody. Thus, the experimental tests were standardized using two position of the two bearings (Fixed or Free) and seven different positions along the counterbody, that permit print different conditions to the stiffness from system. Others parameters as applied normal load, sliding velocity and distance were fixed. In this investigation it was used as coupon two structural polymers of wide quotidian use, PTFE (polytetrafluroethylene) and PEEK (poly-ether-ether-ketone) and the AISI 4140 alloy steel as counterbody. Polymeric materials were characterized by thermal analysis (thermogravimetric, differential scanning calorimetry and dynamic-mechanical), hardness and rays-X diffractometry. While the metallic material was submitted at hardness, mechanical resistance tests and metallographic analysis. During the tribological tests were recorded the heating response with thermometers, yonder overall velocity vibration (VGV) and the acceleration using accelerometers. After tests the wear surface of the coupons were analyzed using a Scanning Electronic Microscopy (SEM) to morphological analysis and spectroscopy EDS to microanalysis. Moreover the roughness of the counterbody was characterized before and after the tribological tests. It was observed that the tribological response of the polymers were different in function of their distinct molecular structure. It were identified the predominant wear mechanisms in each polymer. The VGV of the PTFE was smaller than PEEK, in the condition of minimum stiffness, in function of the higher loss coefficient of that polymer. Wear rate of the PTFE was more of a magnitude order higher than PEEK. With the results was possible developed a correlation between the wear rate and parameter (E/ρ)1/2 (Young modulus, E, density, ρ), proportional at longitudinal elastic wave velocity in the material.

Avaliação tribológica dos polímeros NBR, PTFE e PTFE gravitado em contato com aço AISI 52100

Low cost seals are made of NBR, Nitrile Butadiene Rubber, a family of unsaturated copolymers that is higher resistant to oils the more content of nitrile have in its composition, although lower its flexibility. In Petroleum Engineering, NBR seal wear can cause fluid leakage and environmental damages, promoting an increasing demand for academic knowledge about polymeric materials candidate to seals submitted to sliding contacts to metal surfaces. This investigation aimed to evaluate tribological responses of a commercial NBR, hardness 73 ± 5 Sh A, polytetrafluoroethylene (PTFE), hardness 60 ± 4 HRE and PTFE with graphite, 68 ± 6 HRE. The testings were performed on a sliding tribometer conceived to explore the tribological performance of stationary polymer plane coupons submitted to rotational cylinder contact surface of steel AISI 52100, 20 ± 1 HRC Hardness, under dry and lubricated (oil SAE 15W40) conditions. After screening testings, the normal load, relative velocity and sliding distance were 3.15 N, 0.8 m/s and 3.2 km, respectively. The temperatures were collected over distances of 3.0±0.5 mm and 750±50 mm far from the contact to evaluate the heating in this referential zone due to contact sliding friction by two thermocouples K type. The polymers were characterized through Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA). The wear mechanisms of the polymer surfaces were analyzed by Scanning Electron Microscopy (SEM) and EDS (Energy-Dispersive X-ray Spectroscopy). NBR referred to the higher values of heating, suggesting higher sliding friction. PTFE and PTFE with graphite showed lower heating, attributed to the delamination mechanism

Fontes e períodos de contato de fertilizantes e germinação de sementes de Brachiaria brizantha

A mistura de sementes forrageiras com fertilizantes pode viabilizar o cultivo consorciado, por diminuir a competição com a cultura produtora de grãos. No entanto, se realizada muito antes da semeadura, pode prejudicar a emergência e o estabelecimento das forrageiras. Realizou-se trabalho em condições de laboratório e casa de vegetação, em Botucatu (SP), com o objetivo de avaliar a germinação de sementes de Brachiaria brizantha em razão do tempo de mistura com fertilizantes químicos. O delineamento experimental empregado foi o inteiramente casualizado, com quatro repetições. Os tratamentos constaram de um fatorial 6 x 8, constituído de diferentes períodos de contato das sementes de Brachiaria brizantha cultivar Marandu (0, 6, 12, 24, 48 e 96 h) com os fertilizantes uréia, sulfato de amônio, cloreto de potássio, sulfato de potássio, superfosfato simples, superfosfato triplo e formulado N-P-K (8-28-16) nas formas de mistura de grânulos e farelado. Não houve relação entre os testes de germinação em laboratório e a emergência a campo. No solo, a emergência das plântulas de Brachiaria brizantha não é afetada se realizada a mistura com fertilizantes minerais fosfatados, cloreto de potássio e formulado farelado até 96 h antes da semeadura.

Tensão superficial dinâmica e ângulo de contato de soluções aquosas com surfatantes em superfícies artificiais e naturais

O trabalho objetivou avaliar o efeito de surfatantes em soluções aquosas sobre a tensão superficial dinâmica e ângulo de contato das gotas em diferentes superfícies: artificiais (lâmina de vidro e de óxido de alumínio) e naturais (superfícies adaxiais de folhas de Euphorbia heterophylla, Ipomoea grandifolia e Brachiaria plantaginea). Seis formulações de surfatantes (Antideriva®; Uno®; Pronto 3®; Li-700®; Supersil® e Silwet L-77®), respectivamente nas doses recomendadas do produto comercial (0,050; 0,025; 0,100; 0,250; 0,100 e 0,100 % v v-1) e o dobro delas, foram avaliadas em soluções aquosas. A tensão superficial dinâmica e o ângulo de contato formado sobre as superfícies naturais foram medidos por tensiômetro. Os ângulos de contato formados pelas gotas nas superfícies artificiais foram obtidos por análise de imagens capturadas por uma câmera digital. Os surfatantes influenciam nas propriedades físico-químicas de soluções aquosas. As soluções contendo os surfatantes Silwet L-77® e Supersil®; nas doses de 0,100 e 0,200% v v-1; proporcionaram maiores reduções na tensão superficial dinâmica e menores ângulos de contato das gotas sobre as superfícies artificiais e naturais. Os surfatantes organossiliconados em solução aquosa foram mais eficientes na redução da tensão superficial e proporcionaram maior molhamento de superfícies natural e artificial. em alvos naturais, essas propriedades obtidas com organossiliconados são dependentes das características de superfície das espécies vegetais.

Dessecação da aveia-preta (Avena strigosa Schreb) com herbicida de contato, em presença ou não de assistência de ar junto à barra do pulverizador, em diferentes volumes de calda

A tecnologia de aplicação dos produtos fitossanitários na agricultura pode ser aprimorada mediante a redução dos desperdícios. Com o objetivo de contribuir com tal avanço tecnológico, avaliou-se a eficácia de um herbicida com ação de contato, aplicado em pós-emergência com pulverizadores sem e com assistência de ar junto à barra, em diferentes volumes de calda. O experimento foi instalado no município de Ponta Grossa - PR, com a dessecação de aveia-preta (Avena strigosa Schreb) implantada em sistema de plantio direto sob a palha. Empregou-se a mistura herbicida formulada (SC) de dicloreto de paraquate (400 g ha-1) + diuron (200 g ha-1). O delineamento experimental utilizado foi o de blocos casualizados (DBC), em esquema fatorial 2 (pulverizador sem e com assistência de ar) x 5 (volumes de calda: 0; 100; 200; 300 e 400 L ha-1), com quatro repetições. A avaliação do efeito da dessecação se deu por meio da escala proposta pela Asociación Latinoamericana de Malezas (ALAM). A interação entre os fatores foi significativa, obtendo-se suficiência na dessecação a partir de 200 e 100 L ha-1, sem e com assistência de ar na barra, respectivamente.

Apropriação de novas mídias por estudantes universitárias

It is an investigation that seeks to reveal, record and analyze the process of appropriation and use of digital media by university students, aged between 40 and 60 years. Interested in studying how changes are perceived in the educational sphere for students Whois have gone through liberal/traditional school, ie, effected the first contact with technological devices media as adults, in the university. This investigation sought to contribute to the knowledge on the use of new learning strategies imposed by digital media by recording and analyzing the reports surveyed sample. Allowed to know the cultural universe of these women, revealing the context in which receive mediated messages and uses that maré these learning strategies within their daily academic life. Gathered in this work, reflexions guided by studies of media reception and role played by digital media as builders images and facilitators in knowledging acquisitions, it was chosen to work two main theorical notions: communication media and digital inclusion. As the research methodology, it was used the exploratory descriptive technical together with other appropriate tecniques. In ordem to approach the problem can be observed two phases: a quantitative one, which was used an investigative procedure, a survey data with closed questions; and a qualitative phase, which was used to collect data through a diary from situations encountered in the classroom. The main objective of analyzing how digital media are received, appropriated and used by university women has been fulfilled and it is remarkable that they access with dificulty and can not be considered included digitally. The results show that the problem of these agents is not the access, there are was of appropriation of digital media offered at IES, and it was possible to note that they seek to integrate to the technological world, and they even have devices that can insert them on this world. Insertion in cyberculture sets up the ability to find a favorable way to be aware of reality and production of knowledge and liberating and dignifying practices, in this case refers to an appropriation of citizenship through the field of technological devices offered as a perspective that they can interact