Predictive computed-torque control of a PUMA 560 manipulator robot

This paper describes the integration of constrained predictive control and computed-torque control, and its application on a six degree-of-freedom PUMA 560 manipulator arm. The real-time implementation was based on SIMULINK, with the predictive controller and the computed-torque control law implemented in the C programming language. The constrained predictive controller solved a quadratic programming problem at every sampling interval, which was as short as 10 ms, using a prediction horizon of 150 steps and an 18th order state space model.

Assessing wind profile effects on the global atmospheric torque

The impact of a new approach to the evaluation of surface gravity wave drag (GWD) is assessed. This approach uses linear theory, but incorporates the effects of wind profile shear and curvature, by means of a second-order WKB approximation. While the theory predicts the possibility of either drag enhancement or reduction, depending on the wind profile, results obtained with the ERA-40 reanalysis data clearly indicate the predominance of local drag enhancement. However, the global impact of shear on the atmospheric axial GWD torque comes mostly from regions with predominantly easterly flow, contributing to a slight reduction of the bias found in different studies of the global angular momentum budget. The relative correction due to shear on linear GWD is found not to depend too strongly on the levels chosen for the computation of the low-level wind derivatives.

Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study

Internal tapered connections were developed to improve biomechanical properties and to reduce mechanical problems found in other implant connection systems. The purpose of this study was to evaluate the effects of mechanical loading and repeated insertion/removal cycles on the torque loss of abutments with internal tapered connections. Sixty-eight conical implants and 68 abutments of two types were used. They were divided into four groups: groups 1 and 3 received solid abutments, and groups 2 and 4 received two-piece abutments. In groups 1 and 2, abutments were simply installed and uninstalled; torque-in and torque-out values were measured. In groups 3 and 4, abutments were installed, mechanically loaded and uninstalled; torque-in and torque-out values were measured. Under mechanical loading, two-piece abutments were frictionally locked into the implant; thus, data of group 4 were catalogued under two subgroups (4a: torque-out value necessary to loosen the fixation screw; 4b: torque-out value necessary to remove the abutment from the implant). Ten insertion/removal cycles were performed for every implant/abutment assembly. Data were analyzed with a mixed linear model (P <= 0.05). Torque loss was higher in groups 4a and 2 (over 30% loss), followed by group 1 (10.5% loss), group 3 (5.4% loss) and group 4b (39% torque gain). All the results were significantly different. As the number of insertion/removal cycles increased, removal torques tended to be lower. It was concluded that mechanical loading increased removal torque of loaded abutments in comparison with unloaded abutments, and removal torque values tended to decrease as the number of insertion/removal cycles increased. To cite this article:Ricciardi Coppede A, de Mattos MdaGC, Rodrigues RCS, Ribeiro RF. Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study.Clin. Oral Impl. Res. 20, 2009; 624-632.doi: 10.1111/j.1600-0501.2008.01690.x.

A Call to Arms

This month I’m using my column to issue a call to arms. No, it isn’t a call to arms for war, though it is going to be battle. It is a call to professional librarians who are interested in their jobs lasting more than a few more years. That sounds a bit hysterical but I don’t mean for it to. Yet is it hyperbolic? I don’t think so. We need to rethink, recast, redefine, and refresh our professional métier. I think the last twenty-four months make it imperative that we do so now

Sistema eletro-eletrônico para medição direta de torque em dispositivos girantes utilizando extensômetros de resistência elétrica

Neste trabalho propõe-se um sistema para medição de torque em dispositivos girantes, que utiliza extensômetros de resistência elétrica colados nos próprios elementos constituintes do arranjo mecânico sob análise. Um conjunto de circuitos eletrônicos foi especialmente desenvolvido para o sensoreamento das pequenas deformações que ocorrem nos disposotivos girantes. O sistema opera sem contato eletro-mecânico entre a parte estacionária e a parte girante. Para tanto desenvolveu-se também uma metodologia de projeto e construção de transformadores rotativos que são utilizados para transferência da energia que alimenta os circuitos eletrônicos solidários ao elemento mecânico instrumentado. Também foi necessário utilizar um transmissor em freqüência modulada do sinal elétrico proporcional ao torque medido. Uma análise comparativa, dos resultados obtidos entre os sistemas existentes e aqueles alcançados com a técnica proposta neste trabalho, demonstra sua aplicabilidade em diversas situações práticas.

Influência da adaptação funcional nas relações torque-ângulo e torque-velocidade

O objetivo do presente estudo foi comparar as relações torque-ângulo (T-A) e torque-velocidade (T-V) de bailarinas clássicas (n=14) e atletas de voleibol (n=22). O torque máximo (Tmax) da musculatura flexora plantar (FP) do tornozelo foi avaliada durante contrações isométricas voluntárias máximas nos ângulos de -10°, 0°, 10°, 20°, 30°, 40° e 50° de FP, e durante contrações isocinéticas voluntárias máximas nas velocidades angulares de 60°/s, 120°/s, 180°/s, 240°/s, 300°/s, 360°/s e 420°/s. Além do Tmax, o torque produzido nos ângulos articulares de -10° (T-10°), 10° (T10°) e 30° (T30°) também foi avaliado nas mesmas velocidades angulares. A ativação elétrica dos músculos gastrocnêmio medial (GM) e sóleo (SOL) direitos de cada indivíduo foi monitorada com eletrodos de eletromiografia (EMG) de superfície em configuração bipolar. Uma relação linear foi observada entre o Tmax e o aumento dos ângulos de FP nas atletas de voleibol Um deslocamento dessa relação em direção a maiores ângulos de FP (menores comprimentos musculares) ocorreu no grupo das bailarinas, com o aparecimento de um platô em menores ângulos de FP (maiores comprimentos musculares). Durante as contrações isocinéticas, uma relação hiperbólica foi observada entre o Tmax, T-10° e T10° com o aumento da velocidade angular nos dois grupos. Entretanto, em T30° as atletas de voleibol produziram valores superiores de torque nas velocidades angulares mais elevadas. Os valores root mean square (RMS) dos músculos GM e SOL foram mais elevados nas bailarinas que nas atletas de voleibol, tanto nas contrações isométricas quanto nas isocinéticas. Uma diminuição na ativação do GM e do SOL ocorreu com a diminuição da FP nas atletas de voleibol, enquanto os valores RMS se mantiveram estáveis para as bailarinas ao longo de todos os ângulos testados. Os resultados apresentados nesse estudo suportam a hipótese de que a atividade física sistemática provoca alteração nas propriedades intrínsecas musculares e ativação muscular, modificando assim, as relações T-A e T-V.

Controle de força e torque isométrico em crianças com e sem desordem coordenativa desenvolvimental

Esta tese teve como objetivos investigar: (1) as mudanças relacionadas à idade no controle de força e torque isométrico em crianças de diferentes idades em três tarefas manipulativas distintas, e (2) as diferenças no controle de força e torque isométrico, assim como nas respostas neuromusculares, entre crianças com e sem DCD de idade relacionadas em três tarefas manipulativas distintas. Neste sentido, foi realizado um ensaio teórico sobre a criança com Desordem Coordenativa Desenvolvimental (DCD), além de dois estudos experimentais que têm em comum a análise da estrutura da resposta do sistema motor em relação à performance das crianças com e sem DCD, em três tarefas manipulativas distintas de controle de força e torque isométrico, contínuo e constante. No primeiro estudo, foram investigadas as mudanças desenvolvimentais no controle motor usando um delineamento transversal de pesquisa com crianças de 7, 9 e 11 anos de idade, as quais foram incentivadas a manter o controle de força e torque durante vinte segundos nas tarefas de pressão digital, preensão digital em pinça e torque em preensão digital. Os resultados demonstraram que a performance melhorou com o avanço da idade, devido à capacidade do sistema sensório-motor apresentar uma resposta mais irregular e com um perfil de freqüências mais distribuídas. No segundo estudo, o controle de força e torque entre crianças com e sem DCD, com nove anos de idade, foram investigadas. Os participantes realizaram as mesmas tarefas do estudo desenvolvimental e, além disso, respostas neuromusculares foram mapeadas Os resultados não revelaram uma variabilidade maior e irregularidade menor no grupo com DCD nas tarefas de pressão digital e preensão digital em pinça. No entanto, na tarefa de controle de torque em preensão digital, foi identificada uma maior variabilidade e menor irregularidade na resposta motora do grupo com DCD. Os resultados não revelaram uma variabilidade maior e irregularidade menor no grupo com DCD nas tarefas de pressão digital e preensão digital em pinça. No entanto, na tarefa de controle de torque em preensão digital, foi identificada uma maior variabilidade e menor irregularidade na resposta motora do grupo com DCD. Os resultados da análise das respostas neuromusculares sugerem o uso de estratégias distintas entre os grupos, todavia, tais achados não foram conclusivos.

A technological innovation for capsicums production in Peru: the mechatronics arms

Peru agricultural exports have increased in recent years due to (i) free trade agreements with many countries (United States, Canada, European Union, China, Thailand, Singapore, Japan, Chile, among others), (ii) an increasing international demand for healthy products, (iii) country´s economic development and (iv) more private investments in this sector (Velazco 2012). Also, if we can compare among Peru three main regions (Coast, Andean highlands and the Jungle), It is the Coast (western region) that has a developed agricultural production due to unique weather conditions, private investments, public infrastructure, transport costs and quality of land (Gomez, 2008). This country development is also related to the production of non-traditional products for export like asparagus, artichokes, capsicums, bananas, grapes, among others; produced by agro industrial companies and small farmers and that are mainly labor intensive (Gomez, 2008 and Velazco, 2012). This very successful export diversification and self-discovery process was the result of a combination of strong natural comparative advantages (mainly excellent agro climatic conditions) and a significant innovation effort. It meant the introduction and expansion of new products and markets, the entry of new firms, and experimental research and the adoption of new techniques and process technologies developed abroad (in irrigation, crop management, post-harvesting, sanitary control, storage and packing) to produce high-quality, niche (gourmet) and higher value-added products, in line with consumer trends in sophisticated food markets. In products such as asparagus, mango, organic coffee and capsicums, Peru has become a leading world exporter (OECD). For this reason one of the government main tasks for the next years is to meet urgent agriculture producer’s needs in the areas of technological Innovation and business management (MINAG). In this context, this thesis analyzes the applicability of a new technology – the mechatronic arms – specifically to capsicums production sector in Peru. We chose Capsicums production sector (paprika, chilli pepper) because is mainly labor intensive and is the sector where my family company (DIROSE SAC) operates. This innovation consists in a 40 arms mechatronic combine, and it was first created in order to improve the efficiency on the labor intensive phase of harvest for this kind of agriculture products. It is estimated that a laborer with brief training operating the machine would be equivalent to 40 people that not only would work during daytime, but also on the night shift as well. Also, using this new technology can allow a company to make additional crops that would increase their yields and annual revenues. This thesis was developed as a business plan to make this new product available for other agriculture companies that operates in the capsicums production sector in Peru; however, this new technology has the potential to be modified in order to be available to other kind of agriculture products, in Peru and other countries.

Desenvolvimento e avaliação de padrão de torque para calibração de torquímetros em três faixas de medição

The continuous development of instruments and equipment used as tools or torque measurement in the industry is demanding more accurate techniques in the use of this kind instrumentation, including development of metrological characteristics in torque measurement. The same happens with the needs in calibration services. There is a diversity of methods of hand torque tools in the market with different measuring range but without complaining with technical standards in terms of requirements of quality and reliability. However, actually there is no choice of a torque measuring standard that fulfils, with low cost, the needs for the calibration of hand torque tools in a large number of ranges. The objective of this thesis is to show the development and evaluation of a torque measuring standard device with a conception to allow the calibration of hand torque tools with three levels of torque with an single instrument, promoting reduction of costs and time in the calibration, also offering reliability for the evaluation of torque measuring instrument. To attend the demand in the calibration of hand torque tools it is necessary that the calibration laboratories have a big collection of torque measuring standards, to fulfills the needs of the costumer, what is very costly. The development of this type of torque measuring standard revealed a viable technique and economically making possible the calibration of hand torque tools in different nominal ranges through a single measurement system versatile, efficient and of easy operation

Correlação entre torque, equlíbrio e função do joelho após reconstrução do LCA

Background: Several studies emphasize the importance of assessing the knee function after anterior cruciate ligament (ACL) reconstruction. The influence of several variables on the function of these patients has been analyzed, but there is no consensus in the science literature. Purpose: To evaluate the correlation between the torque and balance on the knee function after ACL reconstruction. Methods: 23 males patients with ACL reconstruction were tested. The procedures of the study included analysis of concentric peak torque at 60o/s and 180o/s of quadriceps femoris and hamstring muscle with a isokinetic dynamometer. The balance in single-limb stance was measured with stabilometry. The functional performance were performed by two hop tests. To estimate the subjective function of the patients was applied Lysholm Knee Scoring Scale and a Global Rating scale. Results: The analysis of data showed a moderate positive correlation between knee extensor torque and functional performance tests (r= 0,48; p=0,02). A moderate negative correlation was found between the two variables of the stabilometry center of pressure and average speed of centre of pressure and the Global Rating scale (r = -0.4, p = 0,04 and r = -0,49, p = 0 ,02, respectively). No correlation was found between peak torque and balance in single-limb stance. Conclusion: The results of the present study suggest that knee extensor strength and postural balance have some influence on knee function in patients after ACL reconstruction

Efeito de três tecnicas de alongamento muscular sobre o torque e atividade eletromiográfica

PURPOSE: To examine the acute effects caused by three techniques for stretching the hamstrings muscle on the active concentric peak torque (PT), passive PT and electromyographic activity (EMG). METHODS: Sixty volunteers (mean ± SD age, 22.6 ± 3 years), height 1.64 ± 0.07m and body weight of 58 ± 8.6kg, were randomly allocated into 4 groups of 15 subjects: Control Group (CG) - 5 minutes at rest, Static Stretching Group (SG) - 2 x 30s; Hold-Relax Group (HRG) - 3 x 6s of isometric contraction of hamstrings interspersed by 10s of hamstrings stretching and agonist Hold-Relax Group (AHRG) - 3 x 6s of isometric contraction of the quadriceps interspersed by 10s of hamstrings stretching. Evaluation has been conducted preand post-intervention, which verified the active concentric PT, passive PT EMG activity of IT. The statistical inference was performed by testing intra and inter, significance level at 5%. RESULTS: After intervention, there was a reduction in passive PT on CG, accompanied by a reduction of EMG activity, and an increase in passive PT on SG and AHRG. There was no change in the active concentric PT, or change in EMG activity. CG showed an increase in angle of the PT active, while the other groups showed no change. CONCLUSION: The results suggest that the shortterm stretching: 1) causes acute increase in passive torque, since the muscle does not perform sub-maximal contraction, 2) does not change in electromyographic activity and active torque, ind ependent of the technique

Neural network based estimation of torque in induction motors for real-time applications

Induction motors are largely used in several industry sectors. The selection of an induction motor has still been inaccurate because in most of the cases the load behavior in its shaft is completely unknown. The proposal of this article is to use artificial neural networks for torque estimation with the purpose of best selecting the induction motors rather than conventional methods, which use classical identification techniques and mechanical load modeling. Since proposed approach estimates the torque behavior from the transient to the steady state, one of its main contributions is the potential to also be implemented in control schemes for real-time applications. Simulation results are also presented to validate the proposed approach.

Spacecraft's attitude prediction: solar radiation torque and the Earth's shadow

A semi-analytical approach is proposed to study the rotational motion of an artificial satellite, under the influence of torque due to the solar radiation pressure, and taking into account the influence of Earth's shadow. Using Andoyer variables the equations for the rotational motion are presented in extended Hamiltonian form. In order to get a solution for the state variables close to an actual motion, the considered model for the shadow function takes into account physical and geometric factors and three specific regions: shadow, penumbra and full light. A mapping for the shadow function is proposed and a semi-analytical process is applied. When the satellite is totally illuminated or it is inside the penumbra, a known analytical solution is used to compute the satellite's attitude. A numerical simulation shows, when the penumbra region is included, the attenuation of the rotational motion during the transition from the shadow to the illuminate region and vice versa. (c) 2005 Published by Elsevier Ltd on behalf of COSPAR.