Development and evaluation of a novel integrated anti-icing/de-icing technology for carbon fibre composite aerostructures using an electro-conductive textile

The preliminary evaluation is described of a new electro-thermal anti-icing/de-icing device for carbon fibre composite aerostructures. The heating element is an electro-conductive carbon-based textile (ECT) by Gorix. Electrical shorting between the structural carbon fibres and the ECT was mitigated by incorporating an insulating layer formed of glass fibre plies or a polymer film. A laboratory-based anti-icing and de-icing test program demonstrated that the film-insulated devices yielded better performance than the glssass fibre insulated ones. The heating capability after impact damage was maintained as long as the ECT fabric was not breached to the extent of causing electrical shorting. A modified structural scarf repair was shown to restore the heating capacity of a damaged specimen.

Inkjet printing of resistively loaded FSS for microwave absorbers

Inkjet printing is proposed as a means to create the resistively loaded elements of a frequency selective surface (FSS) which suppresses radar backscatter when placed above a metal ground plane. Spectral transmission and reflection measurements from 9 to 18 GHz show that the dot density of the printed features and the volume ratio of an aqueous vehicle and nano-silver (Ag) ink mixture can be selected to obtain surface resistances in the range 1.2-200 Ω/sq.

Statue of Hon. John C. Calhoun erected in Statuary Hall of the Capitol at Washington ; proceedings in Statuary Hall and in the Senate and the House of Representatives on the occasion of the unveiling, reception, and acceptance of the statue from the State of South Carolina / compiled under the direction of the Joint Committee on printing

This publication is the proceedings of the unveiling ceremony for the statue of John C. Calhoun in the Statuary Hall in Washington D.C.

The importance of quality in the consolidation of textile in Minho

The textile industry has a long tradition in Portugal and it is one of the most important sectors, despite the current economic crisis. It has always assumed a prominent role in terms of employment and a relevant position within the Portuguese economy. The lack of quality and the lower prices that other countries offer causes the loss of clients. Quality is a main tool to survive nowadays in the textile sector. To undertake our analysis, we made use of an existing database where 55 firms belonged to the textile industry, namely to the manufacturing sector. A new survey was created based on the original survey and was sent to 5 firms. Besides the survey, we also sent a few questions to the firms in order to retract more information about the actually situation in our country, concerning the textile industry. Several tables, graphs and pie charts were made to help shed light on our findings. This research was conducted in order to determine the importance of quality in the consolidation of textile firms in the north of Portugal. Most firms in our sample feel that quality improvement, business benefits, mobilizing employees’ knowledge and business image were important and that competition is very intense and is mainly by price and not by differentiation of product or service. The quality program has contributed to improve their competitive position and the improvement of their overall performance. The majority of the firms in our sample undertake TQM measures for quality purposes to meet customer expectations and prevent errors. Of all firms surveyed, the quality is certainly very important for its survival.

Bending effects on a textile microstrip antenna

This paper describes the design of a textile microstrip antenna for 2.4 GHz. Two different fabrics are used: one for the dielectric part and another one for the conductor part. The dielectric constant of the dielectric fabric is determined experimentally. The input matching is studied by electromagnetic simulation and experimentally. Since the antenna is meant to be incorporated in the user's clothe, the effect that the antenna bending has on the matching level is also investigated both theoretically and experimentally.

International partner selection Indian technical textile market

Due to a combination of a vast agricultural industry and a tremendously growing technical textile industry, Ludvig Svensson identified India as target market for possible expansion through domestic production and supply. However, Svensson needed additional information about the industry structure and key players. Therefore, this project focused on a detailed analysis of the technical textile market and its players by following the international partner selection process. Thereby, five key players were identified as potential partners, as well as the need for additional research to determine alternative entry modes, as the market does not currently seem to be receptive for Svensson products.

The Discrimination of Colored Acrylic, Cotton, and Wool Textile Fibers Using Micro-Raman Spectroscopy. Part 1 : In Situ Detection and Characterization of Dyes

Raman spectroscopy has been applied to characterize fiber dyes and determine the discriminating ability of the method. Black, blue, and red acrylic, cotton, and wool samples were analyzed. Four excitation sources were used to obtain complementary responses in the case of fluorescent samples. Fibers that did not provide informative spectra using a given laser were usually detected using another wavelength. For any colored acrylic, the 633-nm laser did not provide Raman information. The 514-nm laser provided the highest discrimination for blue and black cotton, but half of the blue cottons produced noninformative spectra. The 830-nm laser exhibited the highest discrimination for red cotton. Both visible lasers provided the highest discrimination for black and blue wool, and NIR lasers produced remarkable separation for red and black wool. This study shows that the discriminating ability of Raman spectroscopy depends on the fiber type, color, and the laser wavelength.

Validation of plant dynamic model by online and laboratory measurements – a tool to predict online COD loads out of production of mechanical printing papers

COD discharges out of processes have increased in line with elevating brightness demands for mechanical pulp and papers. The share of lignin-like substances in COD discharges is on average 75%. In this thesis, a plant dynamic model was created and validated as a means to predict COD loading and discharges out of a mill. The assays were carried out in one paper mill integrate producing mechanical printing papers. The objective in the modeling of plant dynamics was to predict day averages of COD load and discharges out of mills. This means that online data, like 1) the level of large storage towers of pulp and white water 2) pulp dosages, 3) production rates and 4) internal white water flows and discharges were used to create transients into the balances of solids and white water, referred to as “plant dynamics”. A conversion coefficient was verified between TOC and COD. The conversion coefficient was used for predicting the flows from TOC to COD to the waste water treatment plant. The COD load was modeled with similar uncertainty as in reference TOC sampling. The water balance of waste water treatment was validated by the reference concentration of COD. The difference of COD predictions against references was within the same deviation of TOC-predictions. The modeled yield losses and retention values of TOC in pulping and bleaching processes and the modeled fixing of colloidal TOC to solids between the pulping plant and the aeration basin in the waste water treatment plant were similar to references presented in literature. The valid water balances of the waste water treatment plant and the reduction model of lignin-like substances produced a valid prediction of COD discharges out of the mill. A 30% increase in the release of lignin-like substances in the form of production problems was observed in pulping and bleaching processes. The same increase was observed in COD discharges out of waste water treatment. In the prediction of annual COD discharge, it was noticed that the reduction of lignin has a wide deviation from year to year and from one mill to another. This made it difficult to compare the parameters of COD discharges validated in plant dynamic simulation with another mill producing mechanical printing papers. However, a trend of moving from unbleached towards high-brightness TMP in COD discharges was valid.

Letter to S.D. Woodruff from John I. Mackenzie regarding the printing of voting blanks

Letter to S.D. Woodruff from John I. Mackenzie regarding the printing of voting blanks 1 doublesided page, handwritten), Apr. 3, 1878.

Le role de la grappe industrielle quebecoise de la mode et du textile sur l'impact du libre-echange Canada-Etats-Unis-Mexique.

Rapport de recherche

Codes de conduite et droit d'association : une étude exploratoire du secteur du textile

Avec la globalisation de l’économie, l’entreprise traditionnelle est devenue un réseau global de producteurs liés par des contrats. À la suite de certains abus commis par les entreprises multinationales, notamment en ce qui concerne les droits fondamentaux des travailleurs, les entreprises et la société civile ont développé des mécanismes de régulation privés dont les codes de conduite privés. La présente étude cherche à déterminer quels pouvaient être les véritables destinataires des codes de conduite : les travailleurs du pays d’origine de l’entreprise (généralement situés dans un pays développé) ou les travailleurs des pays de production (généralement situés dans des pays en développement). À cette fin, le mémoire compare le contenu des codes de conduite de Nike, de Gap et de Levi-Strauss sur ce sujet avec les observations de l’Organisation internationale du travail pour les travailleurs des États-Unis, de l’Inde et du Bangladesh. Certains écarts entre les protections accordées par les codes et les besoins des travailleurs sont ainsi identifiés. Dans la dernière partie du mémoire, la question d’étude est élargie afin d’examiner si les codes ne seraient pas destinés à des personnes autres que les travailleurs, soient les consommateurs, les actionnaires ou l’entreprise elle-même.

Industries et industriels français du textile face au défi international 1871-1914

Fortement liées à l’international, les industries françaises du textile ont connu une évolution erratique entre 1871 et 1914. L’adoption de tarifs hautement protectionnistes en 1892 favorise les industriels du coton au détriment de ceux travaillant la laine et la soie. Ces derniers exportent leurs marchandises luxueuses sur des marchés ouverts à la concurrence. Ils profitent peu des marchés coloniaux, moins intéressés par leurs produits. Des politiques hardies d’importation directe de la matière première permettent, notamment à Roubaix, de pallier à certains désavantages. Si plusieurs industriels incitent le gouvernement à réformer ses services commerciaux à l’étranger et à y adjoindre des spécialistes, ils retiennent peu les recommandations des experts concernant l’adoption des moyens propres à favoriser les exportations. Plusieurs carences du commerce français ont été soulignées précocement mais il a été difficile de rapidement appliquer des solutions. Dans un contexte marqué par une concurrence accrue sur les marchés extérieurs, la France s’en tire mieux qu’on a pu le penser. La flexibilité de l’appareil productif français permet d’obtenir de nombreuses commandes dans les créneaux du luxe et du demi-luxe. Son niveau d’intégration, moins élevé que dans d’autres pays, se révèle ainsi parfois être un avantage. Toutefois, l’industrie textile est handicapée par la grande difficulté des patrons à s’associer de manière stable à l’extérieur du clan familial. L’entente se réalise cependant plus aisément et avantageusement pour ceux qui ont une production spécialisée, rare ou brevetée. Les performances et l’organisation des entreprises textiles françaises à l’étranger montrent que le marché national stimulait peu les producteurs à adopter les meilleures conditions de production possibles. Ces sociétés et celles obtenant des succès à l’exportation sont souvent les plus dynamiques et les plus rentables.

Caractérisation et évaluation de textiles antifongiques

Hypothèse: L’impression sur textile d’une formulation de microparticules lipidiques avec un principe actif (éconazole nitrate) permet de conserver ou d’améliorer son activité pharmaceutique ex vivo et in vitro. Méthode: Une formulation de microparticules d’éconazole nitrate (ECN) a été formulée par homogénéisation à haut cisaillement, puis imprimée sur un textile LayaTM par une méthode de sérigraphie. La taille des microparticules, la température de fusion des microparticules sur textile et la teneur en éconazole du tissu ont été déterminées. La stabilité de la formulation a été suivie pendant 4 mois à 25°C avec 65% humidité résiduelle (RH). L’activité in vitro des textiles pharmaceutiques a été mesurée et comparée à la formulation commerciale 1% éconazole nitrate (w/w) sur plusieurs espèces de champignons dont le C. albicans, C. glabrata, C. kefyr, C. luminisitae, T. mentagrophytes et T. rubrum. La thermosensibilité des formulations a été étudiée par des tests de diffusion in vitro en cellules de Franz. L’absorption cutanée de l’éconazole a été évaluée ex vivo sur la peau de cochon. Résultats: Les microparticules d’éconazole avaient des tailles de 3.5±0.1 μm. La température de fusion était de 34.8°C. La thermosensibilité a été déterminée par un relargage deux fois supérieur à 32°C comparés à 22°C sur 6 heures. Les textiles ont présenté une teneur stable pendant 4 mois. Les textiles d’ECN in vitro ont démontré une activité similaire à la formulation commerciale sur toutes ii espèces de Candida testées, ainsi qu’une bonne activité contre les dermatophytes. La diffusion sur peau de cochon a démontré une accumulation supérieure dans le stratum corneum de la formulation textile par rapport à la formulation Pevaryl® à 1% ECN. La thermo-sensibilité de la formulation a permis un relargage sélectif au contact de la peau, tout en assurant une bonne conservation à température ambiante.