Development of a model to measure the efficiency of outsourced companies in the process of aircraft spare parts technical publications

This paper presents a proposal of a model to measure the efficiency of outsourced companies in the aeronautical industry applying the methods DEA and AHP. It also proposes an evaluation in the relation between the variables of the process and the value obtained for the effiiency. The criteria of Quality, Time and Cost were considered the outputs of the process, and those criteria were quantified by AHP for DEA matrix.The number of technical documents received by those outsorced companies were considered the input of the process. The other purpose is to separate the companies in groups considered able to receive an investment to improve their process. Copyright © 2008 SAE International.

Latin America: incorporating environmental factors into the measurement of production efficiency and technical change

Includes bibliography

Energy Efficiency: Trends and Perspectives in the Southern Mediterranean. MEDPRO Technical Report No. 21/December 2012

This paper has two objectives. First, it attempts to establish the potential of policies on energy efficiency and energy demand-side management in the southern Mediterranean region. Second, by examining past trends in energy intensity and trends up to 2030, it analyses the prospects and costs of such policies, compared with expected developments in the price of energy resources. Based on both analyses (MEDPRO WP4) and on prospects for growth (MEDPRO WP8), it seems that energy intensity in the Mediterranean should fall perceptibly by approximately 13% in the next 20 years. But given the programmed energy mix, this will not limit emissions of CO2, which are likely to increase by more than 90%. The paper first presents the rationale for demand-side management (DSM) policies. After a general discussion of concepts, it tackles the question of instruments and measures for implementing such policies, before posing the question of the cost-efficiency approach for monitoring the measures the authorities introduce. Secondly, the paper assesses energy consumption and energy efficiency in the countries of the southern Mediterranean and the ways in which their main economic sectors have changed in recent decades. The third section outlines the demand management measures introduced and, taking Tunisia and Egypt as examples, estimates the cost of such policies. The fourth and last section offers a forecast analysis of energy consumption in the Mediterranean up to 2030, highlighting probable trends in terms of final consumption, energy intensity, energy mix and emissions of CO2. The section concludes with estimates in terms of cost, comparing objectives for lower intensity, results in terms of resource savings and the types of costs this approach represents.

Development of high efficiency solar cells : final technical report for January 23, 1978-January 2, 1979 /

"April 1979."

Determining the contribution of technical change, efficiency change and scale change to productivity growth in the privatized English and Welsh water and sewerage industry:1985-2000

The water and sewerage industry of England and Wales was privatized in 1989 and subjected to a new regime of environmental, water quality and RPI+K price cap regulation. This paper estimates a quality-adjusted input distance function, with stochastic frontier techniques in order to estimate productivity growth rates for the period 1985-2000. Productivity is decomposed so as to account for the impact of technical change, efficiency change, and scale change. Compared with earlier studies by Saal and Parker [(2000) Managerial Decision Econ 21(6):253-268, (2001) J Regul Econ 20(1): 61-90], these estimates allow a more careful consideration of how and whether privatization and the new regulatory regime affected productivity growth in the industry. Strikingly, they suggest that while technical change improved after privatization, productivity growth did not improve, and this was attributable to efficiency losses as firms appear to have struggled to keep up with technical advances after privatization. Moreover, the results also suggest that the excessive scale of the WaSCs contributed negatively to productivity growth. © 2007 Springer Science+Business Media, LLC.

Műszaki és gazdasági hatékonyság Koopmans termeléselméletében (Technical and economic efficiency in Koopmans' theory of production)

Koopmans gyakorlati problémák megoldása során szerzett tapasztalatait általánosítva fogott hozzá a lineáris tevékenységelemzési modell kidolgozásához. Meglepődve tapasztalta, hogy a korabeli közgazdaságtan nem rendelkezett egységes, kellően egzakt termeléselmélettel és fogalomrendszerrel. Úttörő dolgozatában ezért - mintegy a lineáris tevékenységelemzési modell elméleti kereteként - lerakta a technológiai halmazok fogalmán nyugvó axiomatikus termeléselmélet alapjait is. Nevéhez fűződik a termelési hatékonyság és a hatékonysági árak fogalmának egzakt definíciója, s az egymást kölcsönösen feltételező viszonyuk igazolása a lineáris tevékenységelemzési modell keretében. A hatékonyság manapság használatos, pusztán műszaki szempontból értelmezett definícióját Koopmans csak sajátos esetként tárgyalta, célja a gazdasági hatékonyság fogalmának a bevezetése és elemzése volt. Dolgozatunkban a lineáris programozás dualitási tételei segítségével rekonstruáljuk ez utóbbira vonatkozó eredményeit. Megmutatjuk, hogy egyrészt bizonyításai egyenértékűek a lineáris programozás dualitási tételeinek igazolásával, másrészt a gazdasági hatékonysági árak voltaképpen a mai értelemben vett árnyékárak. Rámutatunk arra is, hogy a gazdasági hatékonyság értelmezéséhez megfogalmazott modellje az Arrow-Debreu-McKenzie-féle általános egyensúlyelméleti modellek közvetlen előzményének tekinthető, tartalmazta azok szinte minden lényeges elemét és fogalmát - az egyensúlyi árak nem mások, mint a Koopmans-féle hatékonysági árak. Végezetül újraértelmezzük Koopmans modelljét a vállalati technológiai mikroökonómiai leírásának lehetséges eszközeként. Journal of Economic Literature (JEL) kód: B23, B41, C61, D20, D50. /===/ Generalizing from his experience in solving practical problems, Koopmans set about devising a linear model for analysing activity. Surprisingly, he found that economics at that time possessed no uniform, sufficiently exact theory of production or system of concepts for it. He set out in a pioneering study to provide a theoretical framework for a linear model for analysing activity by expressing first the axiomatic bases of production theory, which rest on the concept of technological sets. He is associated with exact definition of the concept of production efficiency and efficiency prices, and confirmation of their relation as mutual postulates within the linear model of activity analysis. Koopmans saw the present, purely technical definition of efficiency as a special case; he aimed to introduce and analyse the concept of economic efficiency. The study uses the duality precepts of linear programming to reconstruct the results for the latter. It is shown first that evidence confirming the duality precepts of linear programming is equal in value, and secondly that efficiency prices are really shadow prices in today's sense. Furthermore, the model for the interpretation of economic efficiency can be seen as a direct predecessor of the Arrow–Debreu–McKenzie models of general equilibrium theory, as it contained almost every essential element and concept of them—equilibrium prices are nothing other than Koopmans' efficiency prices. Finally Koopmans' model is reinterpreted as a necessary tool for microeconomic description of enterprise technology.

Technical modifications in stabilisers and in bar removal in the Nuss procedure

Pectus excavatum is a congenital deformity that can require surgical treatment. Since Nuss proposed a correction technique, several modifications have been proposed in order to achieve more safety and efficiency in the placement and removal of both bars. Our objective is to describe the technique of placing and removing the bars by proposing three technical modifications: two in bar placement and one in the bar removal. We describe two cases where Nuss bars were placed and one case where the bar was removed as per the technical modification proposed herein. According to the original technique, bar stabilisers. were placed close to the lateral bar edges. We propose a more medial position in order to reduce bar displacement. New stabilisers were designed with central grooves in the posterior surface, which allow better sliding. The technical modification suitable for bar removal was the use of a protective film around the bars to protect the surrounding tissues from the sharp edges, and thereby minimise the risk of injuries. All the proposed modifications were performed without any additional surgical risk or perioperative complication. These three technical modifications can be easily and safety performed, and seem to reduce the risk of bleeding with no additional perioperative complications. (C) 2009 European Association for Cardio-Thoracic Surgery. Published by Elsevier B.V. All rights reserved.

Supply chain management as beyond operational efficiency

The orthodoxy of supply chain management (SCM) emphasises competitive advantage through increased operational efficiency and market responsiveness from production and distribution processes into the hands of consumers. It anticipates that future competition will be between chains rather than between firms. While well established in other industry sectors, the SCM concept is newly developed in the Australian agri-food sector. Critical review of the concept has identified key issues of power among channel members, processes of chain initiation and innovation, and the inability of SCM to offer a viable business strategy for some firms. Building on those insights, this paper examines the supply chain concept for horticulture. Horticultural products are characterised by perishability, heterogeneity and lags in production response to market signals. Producers’ profits are vulnerable to quantity, timing of supply and product specification. Many supply chains in smaller industries are loose, fragmented, interwoven, unstable and unique! Firms operating within these environments need an astute understanding of the chains, the hierarchy of channel members and their relative position. Effective business strategies – for individual firms and supply chains - need to be developed and redeveloped to accommodate the dynamic nature of horticulture. Two case studies are discussed as contributions to this early stage of the theoretical development of supply chain management. The SCM concept also has implications for horticultural researchers, involving a wider range of industry stakeholders, technical problems and research skills. As for business management, the usefulness of the concept will depend on its capacity to increase responsiveness to customers’ preferences and customer value.

Digital radiography detectors - A technical overview: Part 2

Digital X-ray detector technologies provide several advantages when compared with screen-film (SF) systems: better diagnostic quality of the radiographic image, increased dose efficiency, better dynamic range and possible reduction of radiation exposure to the patient. The transition from traditional SF systems to digital technology-based systems highlights the importance of the discussion around technical factors such as image acquisition, themanagement of patient dose and diagnostic image quality. Radiographers should be aware of these aspects concerning their clinical practice regarding the advantages and limitations of digital detectors. Newdigital technologies require an up-to-date of scientific knowledge concerning their use in projection radiography. This is the second of a two-part review article focused on a technical overview of digital radiography detectors. This article provides a discussion about the issues related to the image acquisition requirements and advantages of digital technologies, the management of patient dose and the diagnostic image quality.

Efficiency Measures in the Agricultural Sector: The Beginning

Copyright © 2013 Springer Netherlands.

Effect of technical parameters on dose and image quality in a computed radiography system

The discovery of X-rays was undoubtedly one of the greatest stimulus for improving the efficiency in the provision of healthcare services. The ability to view, non-invasively, inside the human body has greatly facilitated the work of professionals in diagnosis of diseases. The exclusive focus on image quality (IQ), without understanding how they are obtained, affect negatively the efficiency in diagnostic radiology. The equilibrium between the benefits and the risks are often forgotten. It is necessary to adopt optimization strategies to maximize the benefits (image quality) and minimize risk (dose to the patient) in radiological facilities. In radiology, the implementation of optimization strategies involves an understanding of images acquisition process. When a radiographer adopts a certain value of a parameter (tube potential [kVp], tube current-exposure time product [mAs] or additional filtration), it is essential to know its meaning and impact of their variation in dose and image quality. Without this, any optimization strategy will be a failure. Worldwide, data show that use of x-rays has been increasingly frequent. In Cabo Verde, we note an effort by healthcare institutions (e.g. Ministry of Health) in equipping radiological facilities and the recent installation of a telemedicine system requires purchase of new radiological equipment. In addition, the transition from screen-films to digital systems is characterized by a raise in patient exposure. Given that this transition is slower in less developed countries, as is the case of Cabo Verde, the need to adopt optimization strategies becomes increasingly necessary. This study was conducted as an attempt to answer that need. Although this work is about objective evaluation of image quality, and in medical practice the evaluation is usually subjective (visual evaluation of images by radiographer / radiologist), studies reported a correlation between these two types of evaluation (objective and subjective) [5-7] which accredits for conducting such studies. The purpose of this study is to evaluate the effect of exposure parameters (kVp and mAs) when using additional Cooper (Cu) filtration in dose and image quality in a Computed Radiography system.

Providing energy efficiency location-based strategies for buildings using linked open data

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Efficiency of Gumbel analyses for determining extreme daily precipitation in Switzerland

Gumbel analyses were carried out on rainfall time-series at 151 locations in Switzerland for 4 different periods of 30 years in order to estimate daily extreme precipitation for a return period of 100 years. Those estimations were compared with maximal daily values measured during the last 100 years (1911-2010) to test the efficiency of these analyses. This comparison shows that these analyses provide good results for 50 to 60% locations in this country from rainfall time-series 1961-1990 and 1980-2010. On the other hand, daily precipitation with a return period of 100 years is underestimated at most locations from time-series 1931-1960 and especially 1911-1940. Such underestimation results from the increase of maximal daily precipitation recorded from 1911 to 2010 at 90% locations in Switzerland.